Error stock transfer from storage location to storage location.

i used transaction code mb1b i got error NUMBER RANGE OF TRANS/EVENT TYPE WA IN YEAR 2011 DOES NOT EXIST can anyone answer how to solve this error?

Hi,
I think this is a configuration issue.Please check below thread your issue will get resolved,
Number range for trans./event type WE in year 2011 does not exist
AMIT

Similar Messages

Stock Transfer from one location to another through outbound deliveries

Dear GURUS n EXPERTS,
We have 5 warehouse and one manufacturing plant. Till this time we use two step Stock Transfer method to transferring stock from plant to ware houses.
Now, we want to use Shipping & Transportation System to to calculate transportation cost. But this system consider only outbound deliveries. So, our requirement is:
1. Create the outbound deliveries, but no billing.
2. Receive the material at warehouse against this outbound delivery but do not go for invoice booking.
How can we achieve it. Please guide us.
Thanks,
DSC

Hello,
You may see the IMG path SPRO->Materials Management->purchasing->Purchase Order->Setup Stock Transport Order. Here, the most important ones are Assign Delivery Type and Assign Purchasing Document Type. Availability check, Delivery tolerances etc. are optional. You need shipping point to be created using transaction OVLZ.
Thanks,
Venu

Stock transfer from storage bin to another storage bin.

Hi,
i would like to know the method to be followed in order to transfer the materials from one storage bin to another within the warehouse and also within a storage type.
Also i would like to know how to transfer the material from one storage type to another.

As everyone has mentioned above, to manually create TOs to transfer stock, use LT01 w/ movement type 999. However, this method is limited to a single material at a time.
Depending on your scenario, you may want to set up storage type replenishment - where you regularly restock a smaller warehouse location from a larger one:
Example: Small warehouse section with customer counter service & larger warehouse where bulk items and bulk quantities are stored
Not sure if this is your scenario or not, but here goes:
Requirement is to use the "Large, small" picking strategy for the receiving storage type.
Material master records in that storage type need minimum and control quantities maintained on the WH2 tab
Run (or schedule) program RLLNACH1 to automatically create transfer requirements to transfer stock from bulk storage to the smaller storage type - and then, depending on your config, either stop as TR or automatically post os TOs.
Good luck

Requirement date in reservation for Stock transfer from one storage locatio

Hi ALL,
I have activated the resevration creation by MRP for stock transfer from mail ware house to service storage location by creating MRP area for service storage location when there is requiremnt from service and when MRP is run on the MRP area the resevration in created and trasnfer order is created .but the requiremnt date in reservation is not the same asd of on service order.so kindly let me know why it is ahppening.

Hi,
check the GR processing time for the material . System may be adding GR processing time with reservation requirement to arrive at the service delivery date.
Regards,
Mrinal

Stock transfer between storage location in IS -Retail

Hi,
I want to have a Stock transfer order between two storage locations in the plant.
I have activated the "Activate Stock Transfer Between Storage Locations", now i can create a STO and have the "Issuing SLoc" tab.
Having that i get an error message "Not possible to determine shipping data for material XXX" Message no. 06280.
I am trying to have the shipping data in customizing for set stock transfer - "Define Shipping Data for Plants", but my site is not listed due to the use of IS Retail. Is there a way to configure it?
Tnx
Lior

Hello Lior,
in Retail your distribution center is a vendor and a customer, and your store is a customer. Therefore when you create master data for your distribution centre and store, you also create the vendor and customer masters that are required.
By this link of the DC / Store to the customer master the shipping data is derived. I hope this answers your question.
If you have further queries related to this, please do post them.
Regards,
Smitha

Stock Transfer between Storage Location with Order

Dear MM experts,
I am into SAP SD.
Our client wants to Transfer Stock from one Storage Location to another Storage Location of the same Plant. (This can be easily done thru MB1B via Transfer Posting)
But the unique requirement here is they require some kind of Delivery Order or Tansfer Order to be created first & only based on that document user can transfer Stock between Storage Locations of a same Plant. (Similar to Inter-Plant Stock Transfer where we create Stock Transfer PO & then move goods between plants).
Can you please suggest on how to achieve the above scenario.
Thanks,
Jignesh Mehta
Mumbai

hi
Stock Transfer between Storage Locations
u2022 Function of stock transport orders between storage locations is available from ECC 6.0 onwards.
u2022 As a result of which user can input issuing storage location with supplying plant.
u2022 Facility of using different delivery types for different issuing storage locations is available.
u2022 Shipping Point data can also be determined based on the issuing storage location.
refer following
http://sapfunctional.com/MM/StockTransfer/Configure.htm
http://help.sap.com/saphelp_scm41/helpdata/EN/23/29cf20eabe094e957763a46aa5be9d/content.htm
regards
kunal

What movment types used for stock transfer from Non-WM sloc to WM sloc?

Hello experts,
Can some one tell me , what movment types used for stock transfer from Non-WM sloc to WM sloc in the same plant through MB1B?
Thanks

Hi
When I try to use the Movement Type 311 with Tcode MB1B, in order to move the stock from IM storage Locations to WM storage Locations, I do create the Material Document Successfully, but when I try to convert the Material Document to Transfer Order, I get the message "select atleast one storage type first", but there is no storage type appearing on the screen.
Can you please help me to resolve the above issue.
Thanks.

Stock Transfer from WM Sloc to non WM Sloc

Dear Friends
We have 2 Storage location where one is WM relevant and other is not.
when we do a stock transfer from WM S.LOC to Non WM sloc, the system creates a TR and when creating a TO system does not automatically consider FIFO or even does not search for the storage type and bin. This has to be manually entered.
Can we automate the process of system choosing FIFO meanthod and searching for a Storage type and bin
Your inputs shall be greatly appreciated

Hi
Thanks for the answer,
However, the problem was missing input in Stock removal for the storage type. When i assigned the FIFO strategy, the system was automatically picking the storage type and bin based on FIFO
Thanks once again
Edited by: Anand1981 on Dec 14, 2010 12:22 PM

Stock transfer : From QI to Unrestricted

Hi Gurus,
When I do stock transfer from QI to Unrestricted or blocked, delivery is created and when I go to pick delivery I get following error:
"Select at least one storage type first"
Message no. L3284
Can any one help me out?
Thanks in anticipation.
RajaRam

hi
pls maintain picking storage type.
by
ram

Stock transfer from bin to bin

hi,
In stock transfer from bin to bin process i need solution for the below requirement...
a)The system must raise a warning when a material is transferred to another bin, which already contains the same material with a different batch number.
b)Transferring stock to a single batch location which already contains another material/batch is not allowed.
In bin to bin stock transfer process, it is possible by system to propose destination bin automatically ?
Thanks
Muthuraman.D

The requirements that you have may be fulfilled using 'mixed storage' options available in the storage type configuration. However, there are rigid prerequisities to use certain options such as usage of storage unit management and bulk storage strategy. You may look into a custom putaway strategy (MWMTO003) to fulfill your requirements.
As for automatic proposal of bin during bin-bin transfer, it is pretty much the same set up that you'd use for any other putaway. This includes, enabling storage type search (sections & bin type, if applicable) along with indicators, defining the relevant putaway strategy, and assignment of indicators in the material masters.

IDOC - message type WMMBXY(Stock transfer from quality to unrestricted)

Hi Gurus,
I have IDOC problem.
Inbound message type WMMBXY(Stock transfer from quality to unrestricted), The status if I check in WM02 of Doc is "51-Application document not posted"
Error Message ""Required function
MB_CREATE_GOODS_MOVEMENT is not being processed".
Please Help.
Prashant

Hi
The Idoc whcile Posting using Message type WMMBXY calls the Function module L_IDOC_INPUT_WMMBXY & in turn this calls the function module MB_CREATE_GOODS_MOVEMENT.
This function is not getting executed.
Please check if the Movemnt type used is not active for WM movemnts.
If you have used previously this movemnt type & now it is not working. Please take hlep of ABAPer for debugging & finding the Root cause
Thanks & Regards
Kishore

Report for stock transfer from plant to plant

Hi,
Is there any standard report for stock transfer from plant to plant .
If not is there any enhancements to get the above report.
Regards,
Ravindranath.

Hi Ravi,
U can use the tcode MB51 and their u can give the input as 301 if it is 1 step in the mvt type or use 303 and 305 for 2 step transfer. and generate the report.
if u want the list of stock transport orders then use tcode ME2N and the input parameter as item category "U" and generate the report.
hope it wud have answered ur question
Reward if useful
Shawn

Stock value for stock transfer from depot (RG23D) to manufacturing (RG23A)

Dear all,
The forum posts that I found are all relating to the process of how to do stock transfer from depot plant to manufacturing plant.
The question I want to post is relating to the transferred stock value.
When stock first goes into depot plant (RG23D), the excise duties (CVD, Education Cess, Higher Education Cess, Secondary Education Cess) are all inventorized. However, in manufacturing plant (RG23A), they are CENVATABLE and not inventorized.
In the transfer of stock from depot to manufacturing, how can we split out the stock value from depot and take out the excise duties to CENVAT in manufacturing plant?
If using Stock Transfer process (move stock from depot to manufacturing),
1. Create Stock Transfer Order in ME21N using UD order type
      no accounting
2. Create DO in VL10B and goods issue
During goods issue, moving average of stock in depot plant, will increase stock with the same value in manufacturing plant and reduce the stock value in depot plant. How can we reduce the stock value transferred to manufacturing plant by the original excise duties amount, and pass this amount into J1IEX? Is it done in this step or later steps?
   Dr Stock into manufacturing plant [this value by right, should be reduced as it consists of original excise duties in RG23D?]
      Cr Stock from depot plant
3. J1IJ- RG23D selection for excise invoice for delivery at depot
    no accounting
4. VF01 for proforma invoice
   no accounting
5. MIGO into manufacturing plant (capture excise invoice)- part 1 register. the excise duties can be manually keyed in based on the original RG23D entries when stock is first brought into originating depot plant
     no accounting
6. Enter Incoming Excise Invoice by J1IEX
     Dr CENVAT Input AED
     Dr CENVAT Input BED
     Dr RG23A ECess
     Dr RG23A SHECess
           Cr CENVAT clearing
7. Question: Where to Debit CENVAT clearing? In normal domestic purchase process of raw materials into manufacturing plant, Dr CENVAT clearing will be posted during MIRO time.
If this process is not the correct way to do, please advise the standard SAP recommended way to transfer from depot to manufacturing plant.
Thank you in advance.

You have to add the Excise duty condition types as a Delivery cost Pricing condition types in STO Pricing procedure and have used them in STO. In Pricing procedure, there is no concept of Deductible and Non Deductible. So, what ever the Delivery cost condition you add in Pricing procedure, the amount gets loaded on to the Material cost..To avoid this, a negative condition type needs to be inserted in Pricing procedure with a different accrual key.
You have to add One Positive condition and One Negative Condition type for the same. Negative condition type is to reduce the condition value from the Material cost during GI.
Try this scenario in development server and revert back with your observations.

Stock transfer from plant to depot

Dear Experts,
I have used special procurement type along with additive cost in DEPOT.
There is one more tcode-okyo- Assign origin group to condition type.What is the use of the same?.
one more doubt in STO from Plant to depot
lets say- material(A) standard price in depot 120rs including excise/freight and 100rs in plant
while doing transfer system will dr 120 depotand credit 100 plant and 20 in depot cost center.
I m transferring this 20 rs to depot cost center and when actual freight is coming.i will book the same in depot cost center.
So 20 rs will knock off in depot.
Is it correct approach?
regards
Raman Rana

Hi Ajay,
If i will maintained Moving price at depot and standard at plant.
Lets say stock transfer from plant to depot
Standard price at plant 100rs
Price at depot=standard price at plantfrieghtinsurance= 120rs
So my inventory a/c at depot 120 rs DR
          inventory a/c   at plant 100 rs with standard price
          frieght and insurance clrg a/c 20 rs
When i got actual bill of frieght and exceise
let say 25 rs
I will debit    frieght and insurance clrg a/c 25rs
                   credit vendor a/c                     25rs
In that case i have difference of 5 rs in clrg a/c
Is it correct? or any other way for doing it?
regards
RR

Stock transfer from a Depot to a manufacturing plant

Hi All
I am doing a stock transfer from a Depot to a manufacturing plant.
I have transfered the material from depot to plant and captured the excise
in register RG23D using transaction J1IJ.Now a goods receipt in done in
the receiving plant in refernce to the outbound delivery.
Now the problem is when a excise is captured using transaction J1IEX in
reference to a Goods Receipt and manually enter the details in the system , it gives me a
short dump of BCD_Divide by Zero.
Please advice

Hi,
Go to transaction ST22 it will give you a comprehensive analysis of the dump including the reason. Looks like there is erroneous data.
Regards,
Saurabh Diwakar

Error stock transfer from storage location to storage location.

Similar Messages

Maybe you are looking for