ERROR: stopping on error 7777 during MAIN IMPORT

Dear Expert,
When i am applying Basis and ABAP Support pack 700-17 levels i am getting following red( In Bold) entries in the action log.
   Import phase 'IMPORT_PROPER' (30.12.2008, 14:56:58)
   Error during executing the tp command 'tp IMPORT all CHE ...'
   tp return code: '0014' , tp message: 'A tool used by tp terminated for unknown reasons' , tp output:
     This is tp version 372.04.36 (release 700, unicode enabled)
     ERROR: stopping on error 7777 during MAIN IMPORT
     stopping on error 7777 during MAIN IMPORT
     tp returncode summary:
     TOOLS: Highest return code of single steps was: 14
     WARNS: Highest tp internal warning was: 0118
     standard output from tp and from tools called by tp:
   Details of the error situation can also be found in the import logs
   Interrupt the import due to an error situation (30.12.2008, 15:11:06)
   Display detailed informations concerning the error in phase 'IMPORT_PROPER'
Abort the import due to an error situation (30.12.2008, 15:12:15)
I have found following Notes from the SAP also applied but still i am facing the same error message
Note 1274493 - Windows: TP/R3trans might terminate with old DB library
Note 998004 - Update the Oracle Instant Client on Windows
Regards
Chandra

Hi,
Have you checked note 1288862? Otherwise I recommend to open a message to SAP.
Cheers

Similar Messages

Transport Issue - ERROR: stopping on error 12 during MOVE NAMETABS

Hi Gurus,
Good day!
Can you someone help me with my transport error.
ERROR: stopping on error 12 during MOVE NAMETABS
Appreciate your help.
Cheers,
Virgilio

Thanks for the reply. Here you go.
START MOVE NAMETABS        <SAPSID>      20090921154118              <sidadm>       20090921154115003083
START tp_getprots         <SAPSID>      20090921154118              <sidadm>       20090921154115003083
ERROR ALL                  <SAPSID> 0012 20090921154253              <sidadm>     20090921154115003083
STOP tp_getprots          <SAPSID>      20090921154253              <sidadm>       20090921154115003083
STOP MOVE NAMETABS        <SAPSID>      20090921154253              <sidadm>   20090921154115003083
ERROR: stopping on error 12 during MOVE NAMETABS
Edited by: Virgilio Padios on Sep 21, 2009 9:52 AM

STMS - ERROR: stopping on error 12 during MOVE NAMETABS

Hello,
my STMS suddenly stopped working and is giving following error messages:
This is tp version 372.04.71 (release 701, unicode enabled)
ERROR: stopping on error 12 during MOVE NAMETABS
stopping on error 12 during MOVE NAMETABS
tp returncode summary:
TOOLS: Highest return code of single steps was: 12
WARNS: Highest tp internal warning was: 0118
standard output from tp and from tools called by tp:
Checking logs showed:
2 ETP399 -
DB-COMMIT() -
2 ETP399 -
DB-ROLLBACK() -
2AETP344 dbslerror "26" occured at location "LOC095"    (object "DDXTT")
2 ETP301 -
3 ETP361 "0" Shadow-Nametabs activated, DDL executed
2 ETP362 "6" Shadow-Nametab activations failed
2 ETP360 Begin: Act. of Shadow-Nametabs with DDL ("2010/11/26 18:43:30")
2 ETP363 End : Act. of Shadow-Nametabs with DDL ("2010/11/26 18:43:31")
2 ETP301 -
2 ETP301 -
And
=====================================================================
Update fails (mode flag   to V in DDXTT. Table: /BEV3/CHBPAKNA1S)
Result   /BEV3/CHBPAKNA1S:    Action: CNV      Mode flag: V    Return code: 0
(many entries similar to that).
Any ideas what can be wrong?
Looking forward to any tips!
Regards,
FS

Had to activate manualy objects from DDXTT. Now its working

Stopping on error 12 during DD ACTIVATION during TP import

Hi Experts,
I am trying to import a request suggested by SAP Note 32236, and while doing the import i can add the request to the buffer successfully but getting the following error during tp import.
TSAL-ERP-DEV:devadm 22> tp addtobuffer DEVK074490 DEV pf=/usr/sap/trans/bin/TP_D
OMAIN_DEV.PFL
This is tp version 372.04.36 (release 700, unicode enabled)
Warning: Parameter DBLIBPATH is no longer used.
Addtobuffer successful for DEVK074490
tp finished with return code: 0
meaning:
Everything OK
TSAL-ERP-DEV:devadm 23> tp import DEVK074490 DEV U26 pf=/usr/sap/trans/bin/TP_DO
MAIN_DEV.PFL
This is tp version 372.04.36 (release 700, unicode enabled)
Warning: Parameter DBLIBPATH is no longer used.
ERROR: stopping on error 12 during DD ACTIVATION
stopping on error 12 during DD ACTIVATION
tp returncode summary:
TOOLS: Highest return code of single steps was: 12
WARNS: Highest tp internal warning was: 0118
tp finished with return code: 12
meaning:
A tool used by tp aborted
TSAL-ERP-DEV:devadm 24>
Did i miss something? please suggest a way to solve this problem.
Regards
Karthik D

Are you trying to check in RZ20 --> SAP CCMS Monitor Templates -->
Change & Transport System --> navigate to your domain and system (or first press on Ctrl+F1 "Open alerts")
--> Transports -- >Imports , find your error press on it, and press on "Log overview" button.
find where your error , place cursosr on error and press "Ctrl+f4" (Logs).
P.S. you can navigate to this log from other place, but this one does as he wishes
Regards.

Two Errors during Unicode import into Target System

I exported our non-unicode 64-bit test NW 7.0 BW database as unicode and now I have started the import into the new unicode database on the target system. I am using the Single Code Page System Conversion to Unicode NW 7.0 SP16 and higher documentation. We are at service pack 18 with NW 7. During the Import ABAP phase the sapinst stopped with an errors. I found the following the first error in the SAP000.log - O:\usr\sap\BWP\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20090326104509
O:\usr\sap\BWP\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#18 $ SAP
O:\usr\sap\BWP\SYS\exe\uc\NTAMD64\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Nov 18 2008 23:19:12
O:\usr\sap\BWP\SYS\exe\uc\NTAMD64\R3load.exe -i SAP0000.cmd -dbcodepage 4103 -l SAP0000.log -stop_on_error
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(DDL) ERROR: no tablespace for TABART SLEXC
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(DDL) ERROR: no tablespace for TABART SLEXC
(DB) INFO: disconnected from DB
O:\usr\sap\BWP\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
O:\usr\sap\BWP\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20090326104509
The second error appears in the SAPSLEXC.LOG - O:\usr\sap\BWP\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20090326104509
O:\usr\sap\BWP\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#18 $ SAP
O:\usr\sap\BWP\SYS\exe\uc\NTAMD64\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Nov 18 2008 23:19:12
O:\usr\sap\BWP\SYS\exe\uc\NTAMD64\R3load.exe -i SAPSLEXC.cmd -dbcodepage 4103 -l SAPSLEXC.log -stop_on_error
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(GSI) INFO: dbname   = "BWP20090325020311                                                                                "
(GSI) INFO: vname    = "ORACLE                          "
(GSI) INFO: hostname = "STBWP64                                                         "
(GSI) INFO: sysname = "Windows NT"
(GSI) INFO: nodename = "STBWP64"
(GSI) INFO: release = "5.2"
(GSI) INFO: version = "3790 Service Pack 2"
(GSI) INFO: machine = "4x AMD64 Level 15 (Mod 4 Step 8)"
(DDL) ERROR: no tablespace for TABART SLEXC
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(DDL) ERROR: no tablespace for TABART SLEXC
(DB) INFO: disconnected from DB
O:\usr\sap\BWP\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
O:\usr\sap\BWP\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20090326104509
It looks like the same error but in two different logs. Has anyone seen this error before? Thanks.

I checked and the datafiles for all the tablespaces are set to autoextend up to 10gb and none have done this in the tablepaces that are close to being full. I did increase three tablespaces that were showing close to being full and that did not resolve the error. Would I need to restart the process from the beginning and adjust the dbsize.xml to make it work?

Length error occurred during in IMPORT statement

Dear Friends,
(length error occurred during in IMPORT statement),when im using the SUBMIT syntax..can i know what is the reason.
Thanks
Rajkumar.A

Hello,
I would like to know how did you solve the issue as i came across the same issue.
Thanks,
FBK

Firefox is very slow to respond when opening and nearly always stops responding altogether even refusing to react to Task Manager "End Program@ command. The "not responding@ error message also comes up during navigation on line.

Firefox is very slow to respond when opening and nearly always stops responding altogether, even refusing to react to the Task Manager "End Program" command. The "not responding" error message also comes up during navigation on line. Several attempt have to be made to get on line. A loss of stability seems to be endemic at the moment.

Try following the instructions here: [[Firefox hangs]]

Error messages during XML import of Project Pro 2010 files

Hi folks,
I'm trying to diagnose a couple of sick Project Pro 2010 files loaded from Project Server by saving them locally as XML files and then reimporting (not connected to the server during import). The anomalous behavior exhibited by both files
is that one takes 15 minutes to load from the server, while another takes over 20 minutes. These are not typical load times for this server. In both cases, Project consumes about 25% of the CPU during the load process. There's little network I/O
while this goes on, and when externally linked schedules are loaded to the cache, they load very quickly. Other than the long load times, the schedules appear to be behave normally, except for some very odd print preview behaviors in one of the schedules
that I asked about in a different thread (among other things, the default print preview start date is 17 years after the default finish date, and the finish date is about 11 years before the schedule actually starts).
The questions I'm asking here are about errors I see when I try to import the files exported as XML, and whether they might provide any clues as to what's causing the load time issues.
When attempting to import one of the files saved as XML, a pop-up appears that says, "The actual finish date is before some of the previously entered timephased actual work values. If you continue with this operation, Project will truncate
some of the previously entered timephased actual work values. To continue, click OK..."
When attempting to import the other file saved as XML, I get a series of pop-ups identifying a series of tasks that say, "The timephased edit will cause 'Develop Requirements Review Meeting Mi...' to start before 'Conduct Requirements Review"
finishes. As a result the task link cannot be honored. You can: () Continue. Keep the timephased edit and ignore the link. () Cancel. Ignore the timephased edit. (OK/Cancel/Help)".
Interestingly, both files contain external Project Server predecessor / successor links. In the case of the first file, the XML import just appears to strip those out. In the case of the second file, I get a long series of pop-ups (with
some buggy text inserts) in pairs. The first message in the pair is typically "An import error occurred. The element <PredecessorLink> in the <Task> element with <UID>=611 has invalid data. Verify that the file
name and path are correct, and then try again. (OK)", where the indicated UID varies. The second pop-up in the pair appears to have a buggy text constructor and looks like this, with "[stet]" indicating the apparent buggy text inserts,
"An import error occurred. The element [stet] Verify that the file name and path are correct, and then try again. [stet] in the 309 element with <UID>=7 has invalid data. [stet] ^4 (OK)"
In the second pop-up of the pair, the "xyz element" varies, but the "<UID>=7" reference and "^4" are consistent. In the XML, UID 7 appears to refer to a calendar, a task which includes a number
of entries similar to:
<TimephasedData>
<Type>24</Type>
<UID>7</UID>
<Start>2014-10-03T08:00:00</Start>
<Finish>2014-10-04T08:00:00</Finish>
<Unit>2</Unit>
<Value>PT8H0M0S</Value>
</TimephasedData>
... and to an assignment:
<Assignment>
<UID>7</UID>
<TaskUID>10</TaskUID>
<ResourceUID>-65535</ResourceUID>
<PercentWorkComplete>100</PercentWorkComplete>
which includes blocks like:
<TimephasedData>
<Type>2</Type>
<UID>7</UID>
<Start>2014-10-17T08:00:00</Start>
<Finish>2014-10-17T17:00:00</Finish>
<Unit>2</Unit>
<Value>PT8H0M0S</Value>
</TimephasedData>
Eventually, the second file also does load with no external file links indicated.
Again, I'm just looking for anything that might be a clue to the long Project Server load times.
Thanks in advance,
LP

Slow performance can come from a number of different things. Without knowing more detailed information about your setup or workflow, it's difficult to accurately troubleshoot.
-What kind of Mac are you using?
-What is your source format?
-Where is your source footage located?

Error during export & import of rules in RAR 5.2

Hi all,
We followed the steps mentioned in exporting & importing the rules as per the Config guide. But we
are receiving the below error during the import of rules. Can anybody please throw a limelight on why this error message is appearing?
"Error in Table Data ==> VIRSA_CC_CRPROF
SQL==>Insert into VIRSA_CC_CRPROF(VSYSKEY,PROFILE,RULESETID,RISKLEVEL,STATUS)Values(??????)
Record==>D VIRSA_CC_CRPROF null"
We also ensured that the downloaded file is not truncated and saved it in a separate folder. Does the file needs to saved in ANSI or Unicode text? We saved in ANSI
Also the background ground job is not getting scheduled automatically during the import of ruels. Is that due to the above error?
Thanks and Best Regards,
Srihari.K

Hello Sri,
background job for generating the rules won`t be scheduled before you upload the file successfully.
The most obvious reason for this error message is that you have line in your file - in table VIRSA_CC_CRPROF that is corrupted. Make sure all lines from table VIRSA_CC_CRPROF have all predefined fields - (VSYSKEY,PROFILE,RULESETID,RISKLEVEL,STATUS).
If you keep hiting this problem just delete this table, after the upload you`ll add the critical profiles manually - I bet you don`t have many of them.
Also from my experience I always choose to save the downloaded file in UNICODE UTF-8 format.
Once the file is saved in other format, there`s no use of it, download it again and save directly in Unicode.
Make sure you don`t have empty fields, even in the fields where you don`t have values, you must leave space, otherwise you`ll keep hitting the same issue.
Regards,
Iliya

"iTunes has stopped working" error message during syncing

I've downloaded the latest version of iTunes, and just started to download Podcasts. But now I get the error message during syncing....almost everytime. Is there a solution out there or update that I haven't downloaded??

Same problem here! Moreover, for some reason, the pictures in my iPhone 3GS somehow have been divided into 2 folders, Photos and Medialibrary. And when I open iPhone as a folder through the explorer I can see only the Photos folder, but cannot see the Medialibrary folder which stores the photos taken before updating/upgrading the iPhone and getting separated folders!!! What the hack with all of this?!!! When I connect iPhone to PC it automatically opens iTunes and starts syncronizing it, but at the process of OPTIMIZING the photos (and according to the number of photos it shows, I see that it tries to syncronize that invisible Medialibrary folder) the process suddenly stops and error message pops out Tried the sync test, tried the button DEBUG in that pop out message, but NOTHING HELPS!!! Also, when I open the Medialibrary in my iPhone, the screen get sblack all through scrolling it down, only the video clips are shown there... >.<
So, could you, apple developers, please, explain WHAT THIS PROBLEM IS ABOUT?!!!!!! FIX IT! I am getting ****** of to spend hours at the computer and reading those lame advises which do not help at all! I have my own things to do except reading your support websites. And I payed for the product ready to use, but not a halfproduct which problems should further be solved somehow by users..

Import proper - error stop

Hi,
I get this error while importing the patch for HR and basis. the status is Error Stop
Error in phase: IMPORT_PROPER
Reason for error: TP_CANNOT_CONNECT_SYSTEM
Return code: 0012
Error message: A tool used by tp aborted
Please help me
thank you
chandra

Hi chandra,
is the SAP server up? if it is, try the following:
1) resetting SPAM status-> SE37->SPAM_RESET_STATUS
IV_FORCE=X
IV_TOOL=SPAM
IV_WITH_POPUP=X
If still issue persists:
2) delete the entries from /usr/sap/trans/EPS/in and then reload the files again.
If still issue persists:
3) Run the below command
tp R3I <name of the Sc> <SID> pf=/usr/sap/trans70/bin/TP_DOMAIN_70.PFL -Dclientcascade=yes -Dstoponerror=8 -Drepeatonerror=8 -Dsourcesystems= tag=SPAM
Regards,
hemanth

BUG 2.1 - ARW (Sony Raw) no photos found error during Auto Import

BUG 2.1 - ARW (Sony Raw) no photos found error during Auto Import
I've seen this issue since beta1. The issue seems to be related to a camera setting that stores the files in folders by date. The Folder structure becomes drive>DCMI>10202008>image.ARW
This "no photos found error" I have seen in beta1 LR1 LR1.1 LR1.2 LR1.3 LR1.4 and LR2.0 this is still an issue in LR2.1
Auto import works fine with canon or nikon RAW files (I've used several different cameras with no problems)
The Folder structure for canon files is drive>DCMI>100>image.CR2
Auto import Does not work with Sony A100 .ARW files with folders by date turned on I have heard from people with other Sony cameras like the A700 also have this issue.
Vista Ultimate 32bit SP1
AMD 64X2 duel core 6000+ 3Ghz
6GB 666mhz Ram PAE force enabled
NVIDIA Gforce 7600 256MB video card (1.75GB total with system shared ram)
Primary hard drive: 500GB
Hard drive 2: 400GB (system and photoshop paging files and lightroom catalog drive)
Hdrive 3: 1TB (primary image storage)
user control turned off
system graphics set to performance
Duel display
Lightroom 2.1
photoshop CS3

I believe this is fixed in version 2.5 and 3.0
ARW (Sony Raw) files seem to work with auto import

I am trying to create an executable vi that will call out another vi and show its front panel in the executable. When I try this I recieve this error message "top level vi (my main vi) was stopped at unknown on the block diagram of (my sub vi)

I am trying to create an executable vi that will call out another vi and show its front panel in the executable. When I try this I recieve this error message "top level vi (my main vi) was stopped at unknown on the block diagram of (my sub vi)

Well the most common way is to enclude the vi's in the build spec either directly in the dependancies that the App builder automatically generates OR by declaring them in the build spec as "additional enclusions" (like you must do for dynamic vi calls in your app.
I have heard rummors about My.app Stuff.vi in a nugget Intaris posted- and I've wanted to dig deaper into Intaris' claims- but have not tried it myself.
If you go down the stuff.vi route Keep us curious guys posted
Jeff

Error Occurred During the import

Hi friends,
When i tried to import the sql file of my already build apex application into my work space, and at the time of installation it is returning error like
Error     ERR-1029 Unable to store session info. session=1798024046224326 item=40006855470898
ORA-02091: transaction rolled back ORA-02291: integrity constraint (APEX_040100.WWV_FLOW_PAGE_DA_A_AR_FK) violated - parent key not found
OK     Suppose, if i tried to import that same application via back-end through Sql developer means then too im facing the same error like
Error starting at line 231,323 in command:
commit
Error report:
SQL Error: ORA-02091: transaction rolled back
ORA-02291: integrity constraint (APEX_040100.WWV_FLOW_PAGE_DA_A_AR_FK) violated - parent key not found
02091. 00000 - "transaction rolled back"
*Cause:    Also see error 2092. If the transaction is aborted at a remote
           site then you will only see 2091; if aborted at host then you will
           see 2092 and 2091.
*Action:   Add rollback segment and retry the transaction.
RollbackI dont know the reason behind this problem and what could be the problem. Because of that i couldn't import the application to my work space successfully.
Brgds,
Mini

Hi Mini,
Sorry you've hit this also. As described in Jitendra's linked thread and threads linked from that thread, this is caused by an inconsistent metadata state that can occur in dynamic actions in any version prior to 4.1.1. This was tracked with oracle bug ##1344144, and was fixed in 4.1.1, such that the inconsistent metadata state can no longer occur and that existing inconsistencies are corrected on upgrading or importing to 4.1.1.
Were you able to resolve this as outlined in the linked thread, identifying the problematic DA's and resetting the affected element? Also, are you be able to import the application on apex.oracle.com (4.1.1) successfully?
Regards,
Anthony.

During Table Import got error ORA-12805: parallel query server died unexpectedly

Hi,
I tried to import a single table of size 51 GB which normally imported in 5 hours but last time I got following error after 1.5 hours
ORA-31693: Table data object "SCHEMA"."TABLE_NAME" failed to load/unload and is being skipped due to error:
ORA-12805: parallel query server died unexpectedly.
From the "Alert log" file I found the error is
ORA-00603: ORACLE server session terminated by fatal error
ORA-24557: error 1114 encountered while handling error 1114; exiting server process
ORA-01114: IO error writing block to file 622 (block # 373725)
ORA-27063: number of bytes read/written is incorrect
IBM AIX RISC System/6000 Error: 28: No space left on device
Additional information: -1
Additional information: 253952
I checked all the table spaces have more then 100GB free space. No idea why this happened.
Some mount points of the machine is 100% in used where the table spaces created but in table spaces auto extend is off on every data file and each data file have free space.
Anyone have idea how to resolve this issue.

Hi,
Which filesystem is file 622 in - it's quite a lrge numbered file - is it a tempfile or do you really have that many datafiles?
Regards,
Harry
http://dbaharrison.blogspot.com

ERROR: stopping on error 7777 during MAIN IMPORT

Similar Messages

Maybe you are looking for