Error:storage location for material's valuation type does not exit

create physical inventory document for material , it has a error message "Storage location X105 for material 0004AA00 plant 1151 valuation type **** does not exist", MMSC is ok, so i don't know what question?

Hi Yan,
If no previous goods movements have been posted yet for the combination of the relevant material, plant, storage location and valuation type the physical inventory cannot be done.
The table MCHB is used for both batch managed materials and materials with split valuation. You can only create a physical inventory document for a material with   split valuation when both, a MARD and a MCHB segment are available.
When you create a valuation type in the material master, only the table MBEW is updated - an entry is not created in the table MCHB. This is needed however to perform a physical inventory for this material.
This MCHB segment is created when you perform a goods receipt for the material, but (like with batches) a physical inventory posting cannot   create this entry in the table.
You will need to create a material posting for these materials if you wish to create a physical inventory for them. On the other hand, please,    consider that it is not necessary to create a physical inventory for those materials which have not suffered any goods movement at all.
If you want to make a physical inventory for a material valuated separately, you have to proceed as follows:
- make a goods receipt (561)==> then the stock segment will be created
- make the reversal of the goods receipt
- make the inventory.
Hope this can help
Regards,
Mauro

Similar Messages

OB048 - ED Status from valuation type does not match ED Status handling type TE

Hi,
Good day!
We have experienced an error message (# OB048) indicating that ED Status from valuation type does not match ED Status handling type TE. I have already checked configuration under Tariffs, Duties, and Permits of the Industry Solution Oil & Gas (Downstream) and the following were in order:
1. Excise Duty Group
2. Excise Duty Status
3. Set Handling Type
4. Set Pricing Indicator
5. Maintain excise duty/tax status/account determination
6. Maintain handling type/tax status
May I know what can be the solution to this error message considering that the above configurations were already accomplished.
Thanks in advance.
Regards,
Vensim
Note: Attached is the file with screenshots of the error message. FYR.

EdStevens wrote:
856483 wrote:
<snip>
can i have you mobile contact phone number if possible?
I have seen some pretty astonishing requests on this board, but this one really raises (or lowers) the bar. Just what is it your boss is paying you to do?
Some listserves have lots of people giving their number. I find it odd that people would, but not astonishing for someone to ask. Outside the norm here, but how would someone know ahead of time? It's a bravely connected new world.

Currency/Valuation type does not exist

Hi,
I am parking the documents through transaction FBV1 using a journal entry custom program.The documents are getting parked succesfully. I can see the documents in transaction FBV0. I am explicitly providing the values for local currency/group currency in the upload file.
But the issue here is when I try to post these documents, I get the error "Currency/Valuation type does not exist ".
Please suggest how to avoid this error and post the documents successfully.
Thanks,
Ravindra

Hi,
You need look into the setting for the Plant in OMWC t-code
OSS note 941082
Regards,
R.Brahmankar

Line 1 Error - Value 120 for the flexfield segment Company does not exist

{color:#0000ff}Receiving the following error message in the "Submit Expense Report - Expense Allocation" page:
"Error : Line 1 Error - Value 120 for the flexfield segment Company does not exist in the value set XX_GL_COMPANY"
This error message is shown when the user is entering the expense report in R12 Oracle Internet Expenses responsibility. After the user has finished entering the expense lines and after the user has reviewed the default expense allocation values in the expense allocation page, upon clicking on the next button , this error message is shown.
Has anybody experienced this issue?
We have opened a Service Request with Oracle but so far there is no resolution. This issue occurs intermittently. It is NOT consistent. We have advised the user base with the following workarounds to over this bug:
1. The system administrator shall clear the cache using Functional Administrator responsonsibility
OR
2. Advise the application user to sign-off from Oracle Applications and allow 5 minutes before they sign-in again.
Any help or advise in the matter is appreciated.
Thank you.
{color}

Check these things
1. you have enable PerPeriodOfService DFF to this set.
2. you are setting Context Variable like (AttributeCategory) with requried value.
Thanks

Automatically creation of storage location for material, in MF60

Hi all,
my collegue of PP module uses MF60 transaction.
When he puts XXXX as Replenishment storage location, the system tells him this error: To stge loc. XXXX does not exist for material M1010000182 in plant 0001.
In MM i have activate the automatic creation of storage location for plant 0001 and for all movement types.
Why MF60 does not respect this requirement?
If I try to do movement type 311 with MIGO, manually, there's no problem to transfer the material from a storage location to , XXXX s.loc.
Is there something more that I have to do?
Thanks in advance!
Best regards
Alba

Thanks a lot...
the note says:
Summary
Symptom
A material without storage location view exists.
If within a single material document, this material is moved in such a way that no change in stock occurs in total, the system does not create a storage location automatically even if this is set in Customizing.
Additional key words
OMC3, XLAUT
Cause and prerequisites
All postings to a segment (for example, material, plant, storage location) are only executed if a change in stock occurs. Only in this case, storage locations are created automatically. This way it is made sure that no empty segments are created.
Solution
The system behaves correctly.
Header Data
Release Status:
Released on: 07.07.2000 22:00:00
BUT why IF i do 311 in MIGO, system creates automatically storage location (also if no change in stock occurs in total).
AND if doMF60 (that does mouvement 311), system does not create automatically the storage location?
Best regards
Alba

Block Storage Location for Material Movement

Dear MM Gurus,
pl let us know how to block storage location for a material in Plant.
Requirement is transfer posting (MIGO) should not allow by using 311 mov type in sloc, error message to receive.
example ;
material ; 5000
sloc ; 0001
sloc ; 0002
migo-transfer posting should not happen by using 311
5000
0001 - to 0002
we want to block sloc-0002, how to block sloc, pl help if any solution available.
thanx in advance
regards
srihari

Hi,
You can block the material completely for any movement type by checking X Plant matl status in Basic data view of material master.Or if you want to block specific movement type it will have to done thro authorisation but will apply to all materials .Here the authorisation object M_MSEG_LGO can be worked to remove the movement type or storage loaction .
Dhruba

Same material with some valuation type does not post accounting documeents

Hi Experts,
For a finished goods material has two valuation types and each assigned to a different valuation class.
For example Valuation type PLANT is with valuation class PROD, Valuation type EXTERNAL is with valuatioin class RESL.
When I post any material document, accounting document is getting created only for valuation type EXTERNAL.
The automatic account determination is configured properly with both valuation classes for Transaction event key BSX.
Also the simulation of the account determination (OMWB) is showing perfect and hitting the required accounts.
Where is the setting to control this? How to make the system to create an accounting document even if the material is received/issued with Valuation type PROD?
Thanks in advance.

Hi,
I checked up this scenario and is working alright. Acc docs are created for all the valuation types.
Here the issues are:
       1. Check the configuration and master data for valuations.
       2. System is not giving any error for any material document. It means that
           the transaction is clear. Check the price for val type PLANT is not zero.
regards,
sreenivas

BLock Storage Location for Material

Hi experts,
Some Unwanted storage location exists for some materials . I want to to block them for transfer posting . I tried to do it thru MM06. It is only giving warning msg but not an error msg.
Please suggest.
Regards,
( Rajneesh Gulati )

Dear,
Please Set storage location level deletion flag in material master.
Than GO,
SPRO -> Materials Management -> Inventory Management and Physical Inventory -> Define Attributes of System Messages.
Click on Settings for System Messages.
Change Status W to E for Message Number M7 127 - Material & & & flagged for deletion.
Than try to make material document.
You can't do it.
Regards,
Mahesh Wagh.

Storage location for material to be made mendatory and default

Hi,
We are generating PR of material through CJ2N. I want to make storage location filed in generatl data tab of material, mandatory as well defalut value depending upon the project. If defalult value can not come depending upon project defination then i want to make default value as blank but mandatory
How can i do this?
Regards,
Kalpesh

Dear Kalpesh,
In standard SAP the storage location will be an input field and no default values will get populated when you attach a material component in the activities as the material master will be extended to multiple storage locations.But in your case if is coming as default either some screen variant must exist or some parameter Id would have been maintained.Check Which & How the storage location is getting defaulted from your MM consultant.

Get storage location for material

Hello Abapers,
I have a specific requirement,
I need to find out the current stock of a material provided and detaisl i need are quantity, wareshouse number, plant, storage type, storage type name,
i m getting most of data from MARD, wat I am lacking is storage type and storage type name, can any one please help?
thanks,
Hitesh

Hi
See the tables
MSTA and MVGT
Pass MATNR and LGORT fields to MSTA and take the LGTYP field from MSTA
and take its description from T301T table
Reward points for useful Answers
Regards
Anji

ORA-29829: implementation type does not exist

Hello,
I get ORA-29829: implementation type does not exist when creating an external table in
Oracle 10g 10.2.0.3.0. Anyone knows why this happens?
Wrote file afiedt.buf
1 CREATE TABLE tim
2 ORGANIZATION EXTERNAL
3 (
4 TYPE ORACLE_DATA_PUMP
5 DEFAULT DIRECTORY tim_dir
6 LOCATION ('tim.dmp')
7 )
8* AS SELECT * FROM dba_tables
AB0318@ditoa1> /
CREATE TABLE tim
ERROR at line 1:
ORA-29829: implementation type does not exist
AB0318@ditoa1> select * from V$OPTION;
PARAMETER VALUE
================================================================ ===================================
Objects TRUE
Regards,
Tim

ORA-29829: implementation type does not exist
Cause: The implementation type specified with USING clause could not be found.
Action: Check to see if the type exists and the user has EXECUTE privilege on this type.

Sun.security.validator.ValidatorException: Netscape cert type does not perm

Hi,
I am getting the following exception when clientAuthentication is enabled for ssl connection.
I am using tomcat and a java client in my application.
Please let me know how do i get through this.
Thanks in advance
-Sanjeev
Below trace is from catalina.out
===========================
http-8443-Processor24, SEND TLSv1 ALERT: fatal, description = certificate_unknown
http-8443-Processor24, WRITE: TLSv1 Alert, length = 2
http-8443-Processor24, called closeSocket()
http-8443-Processor24, handling exception: javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: Netscape cert type does not permit use for SSL client
http-8443-Processor24, called close()
http-8443-Processor24, called closeInternal(true)
===================================
I get the below exception in my java client application.
==========================================
: 68 42 6F FD E9 35 AB E5 C7 48 31 2C 78 31 BA F0 hBo..5...H1,x1..
0020: EB 97 10 1F F9 B2 03 B7 7D CE 8A 04 73 37 07 A1 ............s7..
0030: 9D 46 5A A2 B7 99 EE 86 1D EE A1 E4 D6 64 73 9B .FZ..........ds.
0040: 6B FA D1 19 44 54 C0 47 DC F8 E1 4B 33 F6 0D 2D k...DT.G...K3..-
0050: C9 04 B7 E8 8F 67 00 99 78 67 CC BE 26 C4 73 B5 .....g..xg..&.s.
0060: 88 26 F6 08 B7 A3 89 A0 28 29 79 DD 16 B0 86 8F .&......()y.....
0070: DE AA EA D3 1F 9F 8B 5B E7 B4 51 3B C8 90 67 0D .......[..Q;..g.
0080: 68 46 F1 CC 10 D9 hF....
main, WRITE: TLSv1 Handshake, length = 134
main, WRITE: TLSv1 Change Cipher Spec, length = 1
main, handling exception: java.net.SocketException: Software caused connection abort: socket write error
main, SEND TLSv1 ALERT: fatal, description = unexpected_message
main, WRITE: TLSv1 Alert, length = 2
Exception sending alert: java.net.SocketException: Software caused connection abort: socket write error
main, called closeSocket()
Exception
=================================================

Netscape cert type does not permit use for SSL clientTry using another certificate. Your certificate can't be used as a web browser client certificate.

Any Idoc for "storage location for a material" ?

Hi Everyone,
Does anybody know if there is an IDoc type to insert storage location for a material (Table MARD).
BDC is also an option but IDoc should be a better choice.
Thanks & Regards,
Ankur

Hi Ankur,
Storage location view of a material can be created with
MATMAS message type ( Segment E1MARDM ) . You can also use program RMDATIND with relevant data to add the storage location view.
Cheers.

Block Storage location for particular material

Hi,
We gave defined storage location for finished product as follows>
1050 - 2-8°
1040 - RT
When I have created one material, wrongly i have created it in 1050 instead of 1040.
Then i have extend that material to 1040. Now that material is showing both storage locations.
Is it possible to block storage location 1050 for this material only?
Because of both SLOC thre are chaces of wrong receipt in 1050.
Pl. help me to solve this problem.
Gkude

Dear Mr. Kunal,
I have flagged storage location for deletion but till for this storage location system allows receipt also system allows stk. transfer in this location.
Pl. help me so that storage location is permanently deleted from the material or system not allow for GR.
Hope for your reply.
Gkude

Open a storage location for a material

Hi,
how can I open a storage location for a material ?
Is also possible to do it automatically ?
Regards

A storage location is customizing, this is in general open to take any material.
depending on the customizing setting for Auto.create storage location you allow SAP to add the storage location view to your material master automatically with the first movement of a material to a storage location or not.
if you dont allow that, then you have to maintain the storage location view in material master manually for each storage location before you can post a movement for this material in a certain storage location.

Error:storage location for material's valuation type does not exit

Similar Messages

Maybe you are looking for