Error Submitting New App Version in iTunes Connect

Anyone else running into issues submitting a new version of an existing iPhone app to iTunes Connect?
Trying to save a new version and new binary for submission results in the following error message:
There are one or more errors on the page.
Scrolling through the page does not reveal any other indicators something was wrong. The one thing that sticks out in my mind is though is I had to resubmit the app icon when I created the new version for submission. Not sure why the icon disappeared.
Any advice?
Tobin

I can't even get my binary to show up.  App Loader uploaded it just fine two hours ago but it still isn't show up as an available build.

Similar Messages

  • Submitting new App

    Hi All
    I already have one app in the store and ready to submit another ...
    Question is Do I need to do the security certificates again or once you have done it once that it ??
    and its only the adding a new app on the itune connect you do ?
    Regards

    If you mean the certificates for signing your app, then one is sufficient.

  • How to download new version of ios 5.0 in my ipod ? i cant download new apps and i cant connect to itunes store.

    how to download new version of ios 5.0 in my ipod ? i cant download new apps and i cant connect to itunes store.?

    Only with iOS5 or later you can update/upgrade directly from the iPod/iPhone.
    When your version of iOS is lower than 5, you must connect to iTunes and then update.
    It is best when you update iTunes to the latest version first.
    Lex

  • 2 Problems while Distributing app  Version Mismatch. Neither CFBundleversion ['1.1'] nor CFBundleShortVersionString ['1.1'] in the info.plist match the version of the app set in iTunes Connect  ['1.1']

    Since 2 days when I try to validate or distribute my app it says "Version Mismatch. Neither CFBundleversion ['1.1'] nor CFBundleShortVersionString ['1.1'] in the info.plist match the version of the app set in iTunes Connect  ['1.1']". Today it also always says that the Network Connection was lost. Can someone tell me how to solve this problems?
    Thanks

    Thank you Bob
    Ian
    Ian Bennett
    Lecturer
    Department of Communication, Film and Media,
    Anglia Ruskin University,
    East Road,
    Cambridge
    CB1 1PT
    [email protected]

  • When trying to udate iTunes on my PC, I recieve the error message "The older version of iTunes cannot be removed"  How do I correct this error and not lose all the music I have in iTunes?

    When trying to update my version of iTunes on my PC with Windows 7,  I receive the error message "The older version of iTunes cannot be romoved".  How do I correct this problem without losing all the music that I have in iTunes on my PC?

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • I've tried to open itunes but just get error message saying this version of itunes has not been correctly localized for this language. Please run the english version

    Looking for some help.  I am trying to open itunes and I keep getting an error message saying "This version of itunes  has not been correctly localized for this language. Please run the english version"
    Can anyone help.

    Hi there nisbetk,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
    http://support.apple.com/kb/ts1717
    -Griff W.

  • Issues uploading the App Preview on iTunes Connect

    I haven't been able to successfully upload the App Preview to iTunes Connect yet. The upload just spins indefinitely.
    I am using the Yosemite Beta and Safari to access iTunes Connect.
    The Preview is a .mov and is large (330MB), but I believe the max size is 500MB.
    Is anyone else having issues? Suggestions on what to do differently?

    https://developer.apple.com/library/ios/documentation/LanguagesUtilities/Concept ual/iTunesConnect_Guide/Chapters/FirstSt…
    To upload your App Preview, you will need Safari 8 and OS X 10.10 or later.

  • HT204266 I can't get any updates or download new apps because I "cannot connect to the iTunes Store" yet I am able to do other Internet related things. Please help!

    I can't get any updates or download any new apps from iTunes because I "cannot connect to the iTunes Store" or sometimes it says server. I have no trouble getting my email or surfing the Internet, so it is a problem specific to accessing iTunes. Incredibly frustrated! Please help!

    Saw this on another post.
    Applecare Senior Advisor Txx Bxxx (I have his contact info in an email he just sent) just confirmed with me that the problem people are having with the App Store not loading is an apple issue with there servers, ITS NOT YOUR IPAD so don't go restoring it!   It's not happening to everyone however but they are looking into it, its really hit or miss.
    In the meantime ...........
    The Complete Guide to Using the iTunes Store
    http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
    http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
    Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    This works for some users. Not sure why.
    Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
     Cheers, Tom

  • How to use existing leaderboard in a new app version?

    I have a live game in App Store, with a leaderboard.
    Now I'm releasing a new version. I have a new version set up in iTunes Connect, but I'm not able to select the existing leaderboard for this new version.
    How to do that? I assume it must be possible, as players should not lose any data or progress in the game when a new version is released.

    Here's a screen shot of how iTunes Connect's UI looks like. As said, the existing leaderboard can not be selected from it. (Normally I see a small "Edit" button next to "Leaderboards" header from which the leaderboards can be selected.)

  • Error Upgrading to Latest Version of iTunes.

    When I tried to upgrade to the latest version of iTunes, after around 30 minutes of installing it came up with this error:
    *The cabinet file iTunes.cab required for this installation is corrupt and cannot be used.*
    *This could indicate a network error, and error reading from the CD-ROM, or a problem with this package*
    There were two options accompanying this message: 'Retry' and 'Cancel'.
    I selected retry at first, but the message kept coming up.
    So in the end I canceled the whole installation.
    How can I fix this problem?
    Oh, and Merry Christmas!

    okay. i was looking for a drivers download page for your particular model at ShuttleX (to see, for example, if there was new firmware available for your drives).
    but the area in the iTunes diagnostics that usually shows up model information:
    VIA Technologies, Inc. FX43
    ... wasn't saying which model of ShuttleX you had. (that looks more like info about your make of motherboard.)
    i got this far at the ShuttleX support site looking for info on what you had:
    http://us.shuttle.com/support.html
    ... so i figured, i'd better try to work out whether you had what they were calling a complete system or an XPC barebone.

  • Why can't I receive and download my app from Testflight/iTunes connect?

    This problem just started during the switch from Test Flight to iTunes connect last week.
    I've been receiving the email invite but when I go to download the app TestFlight says:
    "You aren't currently testing any apps. To accept an invitation, you must tap the link in the invitation email."
    I do that and it takes me back to this screen.
    Please advise.

    Me too... and now I have a build just sitting in the Processing state on the Prerelease -> Builds screen.
    When iTunes Connect was having huge problems last weekend, (March 14 - 15, 2015) at least the Apple systems status page was showing problems at the iTunes Store. but everything is green now.  https://www.apple.com/support/systemstatus/

  • Error message: The older version of iTunes cannot be removed. Contact your technical support gropu

    When I try to update my tTunes store I get the message, "The older version of iTunes cannot be removed. Contact your technical support group."

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • HT1349 New software versions of iTunes and Safari hanging my XP system.

    I have updated my software versions of iTunes and Safari in response to update message. Upgraded software is now causing my XP system to hang. It looks as if neither of the new versions can access the internet.

    In the course of your troubleshooting to date, have you worked through the following document?
    Apple software on Windows: May see performance issues and blank iTunes Store

  • Ptlconfig error: Exception resolving Portal version : null/ JDBC connect st

    Hi Folks,
    i am getting the following error while running ptlconfig on portal 10.1.2.0.2. midtier home to configure portal dad. does anyone know what to do with it? i have tried on metalink and google extensively to see any description or help on this error but have not found anything.
    will really appreciate if someone might drop a hint or two.
    thanks
    syed
    -- specs:
    win 2003 NT-cmd
    AS version: 10.1.2.0.2
    portal repos version: 10.1.4.0.0
    portal dad = portal30
    portal repository sits in a customer DB
    D:\ORACLE\Midtier1012\portal\conf>ptlconfig -dad portal30
    Portal Dependency Settings Tool
    Processing Portal instance '/pls/portal30' (host:port:servicename)
    Enter either the Portal schema or OID Admin password:
    Problem processing Portal instance: ERROR: Exception resolving Portal version : null
    Problem processing Portal instance: ERROR: Exception resolving Portal version : null
    Problem processing Portal instance: ERROR: Exception resolving Portal version : null
    Processing complete
    -- in the ptlconfig.log file i get the following:
    ERROR: Getting the Portal version raised exception.JDBC connect string used to access Portal is jdbc:oracle:oci:@ ( tnsanmes entry )
    with kind regards,
    Syed

    Yes, we were able to resolve it.
    Try first identifying if you are facing the same problem or not. So login into your portal schema on sqlplus, and see if you get any rows for the following:
    select * from wwc_version$;
    If you do not see any rows, then it means that the portal user is not granted Select on wwc_version$. if that is the case, then grant it. and then try to run ptlconfig again.
    hope that helps.
    AMN

  • Error Creating New Form Version

    OIM 9.0.1.5 Build 1600.10
    Whenever I try to create a new Form Version for an Object Form or Process Form I am getting an error.
    The Form Version has Lookup Queries as properties and this seems to be causing the issue. We did not see this in the past but are now seeing it.
    Anybody else see this issue? Know of a workaround? Know what the validateLookupQuery is actually doing?
    DEBUG,23 Jun 2010 13:22:00,646,[XELLERATE.ADAPTERS],Class/Method: tcSDCProperties/validateLookupQuery entered.
    // Then 1207 seconds later...
    ERROR,23 Jun 2010 13:42:06,139,[XELLERATE.DATABASE],Class/Method: tcDataBase/loadResultSet encounter some problems: Unexpected exception while enlisting XACon
    nection java.sql.SQLException: Transaction rolled back: Transaction timed out after 1207 seconds
    BEA1-07D6DE952A951F3DAFC5
    at weblogic.jdbc.jta.DataSource.enlist(DataSource.java:1548)
    at weblogic.jdbc.jta.DataSource.refreshXAConnAndEnlist(DataSource.java:1456)
    at weblogic.jdbc.wrapper.JTAConnection.getXAConn(JTAConnection.java:206)
    at weblogic.jdbc.wrapper.JTAConnection.checkConnection(JTAConnection.java:83)
    at weblogic.jdbc.wrapper.ResultSet.preInvocationHandler(ResultSet.java:68)
    at weblogic.jdbc.wrapper.ResultSet_oracle_jdbc_driver_OracleResultSetImpl.wasNull(Unknown Source)
    at com.thortech.xl.dataaccess.tcDataBase.getVariant(Unknown Source)
    at com.thortech.xl.dataaccess.tcDataBase.loadRow(Unknown Source)
    at com.thortech.xl.dataaccess.tcDataBase.loadRows(Unknown Source)
    at com.thortech.xl.dataaccess.tcDataBase.loadResultSet(Unknown Source)
    at com.thortech.xl.dataaccess.tcDataBase.readPartialStatement(Unknown Source)
    at com.thortech.xl.dataobj.tcDataBase.readPartialStatement(Unknown Source)
    at com.thortech.xl.dataaccess.tcDataSet.executeQuery(Unknown Source)
    at com.thortech.xl.dataobj.tcDataSet.executeQuery(Unknown Source)
    at com.thortech.xl.dataaccess.tcDataSet.executeQuery(Unknown Source)
    at com.thortech.xl.dataobj.tcDataSet.executeQuery(Unknown Source)
    at com.thortech.xl.dataobj.util.tcSDCProperties.validateLookupQuery(Unknown Source)
    at com.thortech.xl.dataobj.tcSDP.isPropertyValid(Unknown Source)
    at com.thortech.xl.dataobj.tcSDP.eventPreInsert(Unknown Source)
    at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
    at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
    at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
    at com.thortech.xl.dataobj.tcSDL.eventPostInsert(Unknown Source)
    at com.thortech.xl.dataobj.tcDataObj.insert(Unknown Source)
    at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
    at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
    at com.thortech.xl.dataobj.tcSDK.createNewVersion(Unknown Source)
    at com.thortech.xl.ejb.databeansimpl.tcSDKBean.createNewVersion(Unknown Source)
    at com.thortech.xl.ejb.beans.tcSDK_jmpkyy_EOImpl.createNewVersion(tcSDK_jmpkyy_EOImpl.java:2472)
    at com.thortech.xl.ejb.beans.tcSDK_jmpkyy_EOImpl_WLSkel.invoke(Unknown Source)
    at weblogic.rmi.internal.activation.ActivatableServerRef.invoke(ActivatableServerRef.java:90)
    at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:435)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
    at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:430)
    at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:35)
    at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:224)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:183)

    Try to increase the size of the table column.

Maybe you are looking for