Error:switch to package ROMD is off

Hi,
I have accidentally deleted source system assignment for 0material infosource and i was tryng to recreate the same and the associated infopacks are used in a process chains...and when i'm tryn to assign datasource its not visible on the bw side and on r3 there is a log that menctions error(i have allready checked other threads on this topic but of no help)..can you guys suggest any disaster recovery for the same or tips to recover.
i would greatly appreciate help.
Thank you.

Hi Vijay,
Applyn the note 648898
Regards
Prasad

Similar Messages

Datasource 0ARTICLE_ATTR; switch to package ROMD is off

Hi all,
When transfering datasources from rsa5 in ECC, I met the following warning : "Datasource 0ARTICLE_ATTR; switch to package ROMD is off".
Could somebody give me a soluce to the problem or at least a hint?
Thanks in advance.
Geo

Hi, I've encountered a similar error as well; however from note: 648898, it appears that my system is set to global check = 'OFF'.
Does someone know if this is the setting to perform a package check and what that actually means?
thanks!

Error - " Switch to package ISAUTO_VLC is off "

hi,
When i tried to activate Business Content Datasources under APCO-IS_AUTOMOTIVE ---> 0IS_AU_VMS, I encountered following error message " DataSource 0AU_VM_BW_GC; switch to package ISAUTO_VLC is off ".
How can i switch on this package.
Please help.

Hi Vijay,
Applyn the note 648898
Regards
Prasad

Switch to package DRM11 is off

Hi all
i am installing sd datasouce 2lis_ht_dr0drm
and 2lis_ht_ms0drm
i am getting this error-"switch to package DRM11 is off"
can u pls help me in this
thanks in advance
regards
vivek

Please enter SE16 and go to table PAKPARAM. In this table there is an entry for key field 'NAME' equals 'GLOBAL_SWITCH'; this entry controls the behaviour of the package check.
The 'VALUE' for this entry can be set to
'RESTRICTED' - to switch on the restriced package check (i.e. package check is effective where required by server and/or client package)
'R3ENTERPRISE' - to switch on the restricted package check including decoupling checks between structure packages (only possible starting from SAPKB62025 - attention, this setting requires exhaustive administration of package data for all packages involved!)
Please note that in this particular case, an additional entry has to be made in table PAKPARAM with key field 'NAME' equals 'SAP_DEV_SYSTEM' and 'VALUE' set to 'X'. (Otherwise, the package check will automatically be switched off.)
'OFF' - to switch off again the package check
Please don't change any other entries in table PAKPARAM.
Please note that upon switching on this check, the activation of DDIC objects with package check errors is impossible through SE11.
Note 648898 - Switching on the package check
Hope it Helps
Chetan
@CP..

RSA5 active datasource,get this error switch to package ******* is off

Hi, expert.
When I use TCODE RSA5 to active datasource in R3,in the end I got this error:
DataSource 0WBS_ELEMT_USR_ATTR; switch to package PS_IS_EHP3_SFWS_SC is off
Message no. R8371
my R3 and BW are the same client.
I don't know how to correct it. PLZ help me, thank you very much.
Edited by: Bruce Wang on Dec 22, 2009 9:36 AM

Hi
I think u need to install package related to EHP3.
For more details :
http://sap.ittoolbox.com/groups/technical-functional/sap-basis/installation-of-ehp3-3136634
http://www.google.co.in/search?hl=en&q=EHP3inSAP+R%2F3&btnG=Search&meta=&aq=f&oq=
Regards
Ram.

Switch to package EAM_EHP4_SR_SFWS_SC is off, Message no. R8371

Hi Expert,
in ECC DEV, I'm trying to activate DataSource SAP-R/3/PM/0PM_SCH_PLND_ORDER, but got this error:
DataSource 0PM_SCH_PLND_ORDER; switch to package EAM_EHP4_SR_SFWS_SC is off
Message no. R8371
Please help. Thank you.
Edited by: Ting Chen on Sep 10, 2010 7:32 PM

Hi Ting Chen,
I'm experiencing a similiar problem, how did you solve this?
BR,
Linda

Switch to package NBWD is off

Hi
While iam activating this Data source in RSA5 0HC_APPRTYP_TEXT its showing an error message , pls provide me the solution..., My R/3 system is ECC6, and Bw Is 7. version
ERROR: DataSource 0HC_APPRTYP_TEXT; switch to package NBWD is off
Message no. R8371
Regards
chaitanya

Hi chaitu
Even I am facing the same problem ,how u solved the problempls let me know
Thanks
Priya

DataSource 0PM_SCH_PLND_ORDER; switch to package EAM_EHP4_SR_SF

Hi Experts,
I'm trying to activate a datasource 0PM_SCH_PLND_ORDER Scheduling Overview and Planned Order in ECC, but got this error:
DataSource 0PM_SCH_PLND_ORDER; switch to package EAM_EHP4_SR_SFWS_SC is off
Please help. Thanks!
Ting

Hi,
I am having the same problem when I try to activate the datasource 0PM_SCH_PLND_ORDER. Can you please let me know how did you resolve the problem?
Thanks,
SB

Pacman throws "unrecognized archive format" error for .xz packages

Hi,
I am recently getting the following error while installing packages which are in .xz format only.
for e.g.
sudo pacman -S pacman //works fine. as it is packaged in a .gz format
sudo pacman -S xterm // error while reading pakage /var/cache/pacman/pkg/xterm-261-1-i686.pkg.tar.xz -- unrecognized archive format: Invalid or incomplete multibyte or wide character.
I tried using the -U switch to install it -- I got the following little different message:
$ sudo pacman -U /var/cache/pacman/pkg/xterm-261-1-i686.pkg.tar.xz
error: error while reading pakage /var/cache/pacman/pkg/xterm-261-1-i686.pkg.tar.xz: unrecognized archive format: Invalid or incomplete multibyte or wide character.
error: '/var/cache/pacman/pkg/xterm-261-1-i686.pkg.tar.xz': libarchive error
I have libarchive-2.8.4-1 on my system ( I have reinstalled it. )
[more info]
I used ltrace to see what is happening, here is the trace around the point where I am getting the error:
alpm_trans_commit(,,, <unfinished ...>
printf("checking package integrity...\n")
fflush(...)
dcgettext(0, 0x805x690, 5, ...) = 0x8058690 ---- AFAIK, this one gets local specific string
fprintf(..., "error: ")
vfprintf(..., "error while reading package %s:"...)
<... alpm_trans_commit(,,,) resumed> )
alpm_strerrorlast(...)
dcgettext()
dcgettext()
fprintf(... "error")
Last edited by prasadr (2010-09-22 18:40:31)

t@n6re ~]# ldd /usr/bin/pacman
linux-vdso.so.1 => (0x00007fffc9bff000)
libalpm.so.5 => /usr/lib/libalpm.so.5 (0x00007f4c44445000)
libc.so.6 => /lib/libc.so.6 (0x00007f4c440e9000)
libfetch.so => /usr/lib/libfetch.so (0x00007f4c43ed9000)
libarchive.so.2 => /usr/lib/libarchive.so.2 (0x00007f4c43c96000)
/lib/ld-linux-x86-64.so.2 (0x00007f4c44668000)
libssl.so.1.0.0 => /usr/lib/libssl.so.1.0.0 (0x00007f4c43a3a000)
libcrypto.so.1.0.0 => /usr/lib/libcrypto.so.1.0.0 (0x00007f4c4367e000)
libacl.so.1 => /lib/libacl.so.1 (0x00007f4c43477000)
libattr.so.1 => /lib/libattr.so.1 (0x00007f4c43273000)
libexpat.so.1 => /usr/lib/libexpat.so.1 (0x00007f4c4304b000)
liblzma.so.0 => /usr/lib/liblzma.so.0 (0x00007f4c42e29000)
libbz2.so.1.0 => /lib/libbz2.so.1.0 (0x00007f4c42c19000)
libz.so.1 => /usr/lib/libz.so.1 (0x00007f4c42a01000)
libdl.so.2 => /lib/libdl.so.2 (0x00007f4c427fd000)
libpthread.so.0 => /lib/libpthread.so.0 (0x00007f4c425e0000)
[root@n6re ~]#

Error using SAPM -- package SAPKGPAD08

Hi
I am trying to update the EA-APPL packages through SPAM
my current patch level is 7 and i am trying to load patch 8
package name SAPKGPAD08
i have checked for all dependencies, extra .. everything ok
i get error during import phase.. with exit code 8
below is the log file .. (the end of the file)
==================================
file == SAPPGPAD08.DEV.txt
==================================
2EETW165 Function "REIT_GUI_TC_BASE_POPUP (REIT_GUI_TC_BASE_POPUP|01)" does not fit into the existing function group "(REIT_GUI_TC_BASE|02)".
2 ETW167 Please transport the whole function group.
4 ETW000      table SPROXDAT: entry in DB is 32 bytes bigger than in file.
4 ETW000      ... ignoring such differences.
4 ETW000      table APB_LPD_CONTROL: entry in DB is 1 byte bigger than in file.
4 ETW000      ... ignoring such differences.
4 ETW000      table FPB_EXP_CA_ASSM: entry in DB is 12 bytes smaller than in file.
4 ETW000      ... ignoring such differences.
3WETW109 table "FPB_EXP_CA_ITM1" does not exist in nametab.
3WETW109 table "FPB_EXP_CA_ITM1T" does not exist in nametab.
3WETW109 table "FPB_EXP_PATHS" does not exist in nametab.
4 ETW000      table FPB_EXP_SCEN: entry in DB is 30 bytes smaller than in file.
4 ETW000      ... ignoring such differences.
3WETW109 table "FPB_EXP_SECT" does not exist in nametab.
3WETW109 table "FPB_EXP_SECTT" does not exist in nametab.
3WETW109 table "FPB_EXP_SRVOTYPS" does not exist in nametab.
4 ETW000      table FPB_EXP_STPGRP: entry in DB is 1 byte smaller than in file.
4 ETW000      ... ignoring such differences.
3WETW109 table "TIVITTCEXECREG" does not exist in nametab.
3WETW109 table "TIVITTCEXECREGT" does not exist in nametab.
3WETW109 table "TIVITTCREGVAR" does not exist in nametab.
3WETW109 table "TIVITTCREGVART" does not exist in nametab.
4 ETW690 "0" "0"
4 ETW000 COMMIT (30868956).
4 ETW000 30868956 bytes read.
4 ETW000 Transport overhead 29.6 %.
4 ETW000 Data compressed to 8.3 %.
4 ETW000 Duration: 7 sec (4409851 bytes/sec).
3 ETW710 "0" "0"
4 ETW000 [dev trc     ,00000] Sun May 13 20:44:43 2007                         6137953 6.137953
4 ETW000 [dev trc     ,00000] Disconnecting from ALL connections:                   24 6.137977
4 ETW000 [dev trc     ,00000] disconnected from 'DEV', con_hdl=0                  1863 6.139840
4 ETW000 [dev trc     ,00000] Disconnected from connection 0                        82 6.139922
4 ETW000 [dev trc     ,00000] statistics db_con_commit (com_total=2, com_tx=2)
4 ETW000                                                                              28 6.139950
4 ETW000 [dev trc     ,00000] statistics db_con_rollback (roll_total=0, roll_tx=0)
4 ETW000                                                                              23 6.139973
4 ETW000 Disconnected from database.
4 ETW000 End of Transport (0008).
4 ETW000 date&time: 13.05.2007 - 20:44:43
4 ETW000 10 warnings occured.
4 ETW000 1 error occured.
1 ETP152 TESTIMPORT
1 ETP110 end date and time   : "20070513204443"
1 ETP111 exit code           : "8"
1 ETP199 ######################################
================================================
Any help would be much appreciated
regards
abdul.

Finally ..
I was able to solve these errors
Solution: ( for others reference.. maybe it might help someone ..like me)
Steps
I had created a queue with the ea appl packages 7 and 8.
first i deleted this queue.. (as it was in test phase i could)
then i choose only package 7 and uploaded it.. (the error was with package 8)
then i updated package ea dfps (7) .... as i needed that also
then i updated package ecc-dimp(7)....as i needed this too
during which i had to increase the appheapsz of the db (ibm db udb 9)
through its control center..
and its log file size ... (this as i was getting sql error 945 during import of ecc dimp 7)
then after all the 7 level packages had gone
i updated package level 8 of ea appl .........( it went like a breeze)
no headaches
then i was also able to update 8 level packages of ea dfps and ecc dimp
maybe this might help someone ..... maybe not
thanks to all of u guys who tried to help
regards
Abdul

Disk Utility Error "no valid packages"

Hi,
I have a PowerBook G4 with 1GB RAM.
I've noticed a significant system slowdown lately. Programs take longer to open and respond, and it's rather annoying. I came to the forums to seek some remedy, and tried to run a Disk Utility to check that everything there is at least okay. But when I click on verify permissions, I get an error that says "no valid packages." Does anyone know what this means and how to fix it (if it needs fixing; I'm assuming this isn't a good thing, whatever it is!).
Thanks.
Lori

Hi librarygirl and Welcome to the Discussions!
Mac OS X 10.3, 10.4: Disk Utility shows a "No Valid Packages" alert
Disk Utility can't verify or repair permissions on the Mac OS X 10.3 or 10.4 volume if the "BaseSystem.pkg" file is not in /Library/Receipts.
This alert appears when you try to repair permissions with Disk Utility:
"First Aid failed
"Disk Utility stopped repairing permissions on '(volume name)' because the following error was encountered: No valid packages"
In the Disk Utility text window, this message appears in red text:
"Error: No valid packages (-9997)"
This happens when the BaseSystem.pkg file is not in /Library/Receipts.
Solution
If you've moved this file, move it back to /Library/Receipts. You shouldn't normally remove any files from /Library/Receipts.
If the file has been deleted, replace it by copying it from a different computer that uses Mac OS X 10.3 or 10.4, or by reinstalling Mac OS X 10.3/10.4 from an installation disc.
"Reinstall" means you can install 10.3 or 10.4 from a disc, if it's the same version of 10.3/10.4 (such as 10.3.3 on both the installation disc and computer). If the version of 10.3/10.4 on the computer is newer than what's on the install disc, then use the install disc to perform an Archive and Install installation instead, then update to a later version of Mac OS X.
Joe

No Hard Drive Or Volume Icon In Powerbook G4 Firewire (aluminium) Disk Utilities: Reads Error: No Valid Packages (-9997)

Whilst performing a zero/erase install on my Powerbook G4 Firewire (aluminium) with an OSX Tiger install disk (Tiger was the OSX i had erased), I had to force quite the installer as it appeared to be stuck on the Chinese script install section. I crashed the Powerbook down using the power button method. Now, when i power up the computer, it stays on the grey screen and just beeps at me. If i insert the install disks (both OSX Tiger or the original Powerbook Panther ones) there is no volume found during the install process. In disk utilities no hard drive icon or volumes appear in the left hand list, just 2 headings regarding the OSX install disk. I have clicked 'Verify Disk Permissions' on these headings and receive this message in the action box: Error: No Valid Packages (-9997). All other options in disk utilities are not available to use (partitions section etc), as there is no hard drive recognized to perform anything on. I presume my erase install has wiped out my previous OSX Tiger without installing some essential on the Powerbook (receipts perhaps?). My Powerbook was working 100% before this install attempt. It's a very lightly used machine with no noises/whirrs coming from the hard drive that would suggest failure of some kind. Any advice would be much appreciated.

Many thanks for your advice old comm guy.
I have run the Hardware Test as supplied with the Powerbooks install disks and everything has passed. I presume i can put my mind at rest about it being a problem in any of those departments. I have been browsing for a couple of weeks now and think my problem could be a loss in receipts/permissions somewhere. I remember looking for a lost file awhile back using a hard drive search programme through Terminal. It filled my hard drive almost to the maximum with unwanted retrieved files, it took me hours to erase all this again (never found the document i was looking for either). Perhaps a receipt was erased/trashed at this time?. Sometime later (prob weeks) i performed a fresh OSX install to give me an uncluttered faster running machine (I do this once a year). I zero erased the hard drive (including free space) and it was during this install that i had to force quit. It seemed to be stuck loading the Chinese Script so i had no option. After this the problem as described above has been persistent. Is there a way to restore receipts/permissions through Terminal or something like that?. Or maybe a procedure that one has to do when installing a new hard drive?. A step by step guide from someone would be a real help as i am not really confident using these advanced procedures.

Error No Valid Packages

Ok so this is the story. Backed up my iMac with a new 1 TB drive using Time Machine. All fine. Took about an hour but seems fine simple as anything. Firewire 800 very rapid.
Decided to do the same with my Macbook this cant be difficult Im telling myself... good one.
Ok so using a USB external drive I started backing up the Macbook. (I must say here that the drive wasnt empty it had some stuff on it already) I figured this was ok but now Im beginning to think otherwise. After about 45GB the backup starts to freeze. I left it an hour but then it just wouldnt do anything. In hindsight me deciding to stop the backup was probably a bad thing at this point but after I stopped it the macbook froze.
I had to reboot... wont reboot... just sits there spinning and the apple icon.
Rebooted from the disc and disc utility and ran permissions I get the message Error No Valid Packages.
At this point Im seeing just over 100 GB in use, and 200 free.. so I know my stuffs there but I just cant get it to boot OSX.
For reference its Snow Leopard. Please help!!!

Try running Disk Repair from the Install DVD. Sounds like you may have some HD corruption. Alternately, you could try booting while holding Shift. This will put you in SafeBoot. If you can boot here, backup your important files!
For more info on what SafeBoot does:
http://support.apple.com/kb/HT1564

"Error: No valid packages (-9997)" Tiger installation disc

When attempting to install tiger on my imac g4, it gets to about 65% on the essentials bar then errors, something like BomFatal error some files are not written properly. My harddrive repairs fine but the Mac OSX disc, when i run permission verification first aid returns "Error: No valid packages (-9997)". The support page was not paticularly helpful in this respect, and the folks here tend to be more helpful anyway.
Thanks in advance.

Here's a post with replies that cover your issue.
Posting in the Airport for Windows forum will not get the help you need. I found this post by accident.
Perhaps, (if this is what you have) the iMac Flat Panel forum would help you more.
DALE

While installing itunes i am getting error "this installation package could not be opened.verify that the package exists and that you can access it,or contact the appliacation vendor to verify that this is a valid windows installer package"

While installing itunes i am getting error "this installation package could not be opened.verify that the package exists and that you can access it,or contact the appliacation vendor to verify that this is a valid windows installer package"

I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/itunes/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

Error:switch to package ROMD is off

Similar Messages

Maybe you are looking for