*** Error symbol

I'm trying to export an HDV sequence from Final Cut directly into Compressor as I usually do, but as soon as I try to select the setting for the project, it gives me a yellow triangle with an exclamation mark in it. What does this mean?

Bubba:
You didn't mention exactly where you get the symbol. For example, if your destination file exists in the same location with same name, you can get an error symbol beside the final file name.
Alberto

Similar Messages

How use page Fragments(give me this error symbol : class Hyperlink )

hi master
sir
i am try to this link sample for page fragments
http://developers.sun.com/jscreator/learning/tutorials/2/pagefragments.html
every setp is right but when i use this code
Hyperlink homeLink = navigationFragmentBean.getHomeLink();
this line give me error
see error
symbol : class Hyperlink
location: class fragmentexample.Page1
Hyperlink homeLink = navigationFragmentBean.getHomeLink();
1 error
please give me idea how i remove this error
thank's
aamir

hi master
sir use mysql database
I have three textfield in my page and one button.
All texttfidld are bound with datasourceprovider or bound with mysql and I use normal code in button event
getMfatableDataProvider().cursorNext();
also I drop page fragment box tool and create new fragment in my application but when I run my page and click the button first record move to next record and again I press button then page give me this error
when I run my project then in browser address show this
http://localhost:29080/mfamove/
first time when I press button record move to next record and browser show this address
http://localhost:29080/mfamove/faces/Page1.jsp;jsessionid=12a66ea53657ffffffffcb77c9939bc5aa0
second time I press button then browser show this address
http://localhost:29080/mfamove/faces/Page1.jsp
and page show this error
Description: An unhandled exception occurred during the execution of the web application. Please review the following stack trace for more information regarding the error.
Exception Details: javax.faces.el.MethodNotFoundException
textField1_processValueChange: mfamove.Page1.textField1_processValueChange(javax.faces.event.ValueChangeEvent)
Possible Source of Error:
Class Name: com.sun.faces.el.MethodBindingImpl
File Name: MethodBindingImpl.java
Method Name: method
Line Number: 206
Source not available. Information regarding the location of the exception can be identified using the exception stack trace below.
Stack Trace:
com.sun.faces.el.MethodBindingImpl.method(MethodBindingImpl.java:206)
com.sun.faces.el.MethodBindingImpl.invoke(MethodBindingImpl.java:124)
javax.faces.component.UIInput.broadcast(UIInput.java:492)
javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:249)
javax.faces.component.UIViewRoot.processValidators(UIViewRoot.java:343)
com.sun.faces.lifecycle.ProcessValidationsPhase.execute(ProcessValidationsPhase.java:78)
com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:221)
com.sun.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:90)
javax.faces.webapp.FacesServlet.service(FacesServlet.java:197)
sun.reflect.NativeMethodAccessorImpl.invoke0(NativeMethodAccessorImpl.java:-2)
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
java.lang.reflect.Method.invoke(Method.java:585)
org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:249)
java.security.AccessController.doPrivileged(AccessController.java:-2)
javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:282)
org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:165)
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:257)
org.apache.catalina.core.ApplicationFilterChain.access$000(ApplicationFilterChain.java:55)
org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:161)
java.security.AccessController.doPrivileged(AccessController.java:-2)
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
com.sun.rave.web.ui.util.UploadFilter.doFilter(UploadFilter.java:194)
org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:210)
org.apache.catalina.core.ApplicationFilterChain.access$000(ApplicationFilterChain.java:55)
org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:161)
java.security.AccessController.doPrivileged(AccessController.java:-2)
org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:263)
org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:225)
org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:173)
org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:170)
org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:132)
org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:551)
org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:933)
org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:189)
com.sun.enterprise.web.connector.grizzly.ProcessorTask.doProcess(ProcessorTask.java:604)
com.sun.enterprise.web.connector.grizzly.ProcessorTask.process(ProcessorTask.java:475)
com.sun.enterprise.web.connector.grizzly.ReadTask.executeProcessorTask(ReadTask.java:371)
com.sun.enterprise.web.connector.grizzly.ReadTask.doTask(ReadTask.java:264)
com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:281)
com.sun.enterprise.web.connector.grizzly.WorkerThread.run(WorkerThread.java:83)
Please give me idea how I use record navigation
Thank�s
Aamir

Metadata error symbol

Just recently when I've tried to make metadata changes in Lightroom 3, the symbol for metadata conflict shows up on my image. It doesn't make any difference what the change is - an adjustment to white balance, exposure, adding a keyword, etc. The only way to get rid of the error symbol is to click on" import from disk". But when I do this the editing changes disappear, of course. Is there a solution to this? As, obviously, the changes are not being saved in the catalog.

A metadata conflict happens when the data in the LR catalog and in the xmp file are not identical.
For LR the xmp files are not necessary as all changes made in LR - be they edits or other metadata changes - are stored in the catalog.
Saving the changes to xmp file - via >Metadata > Save metadata to file or Ctrl/cmd + S - is in addition to the changes being written into the catalog and enables the changes made in LR to be seen and displayed in other Adobe products, for instance in Bridge. If this is not important to you, you can safely forego saving to xmp file because Lr doesn't need xmp-files.
You problem probably is caused by checking the box <Automatically write changes to xmp> in the >Catalog Settings >Metadata tab. Uncheck the box.
You still can save to xmp but you have to do it manually (Ctrl/Cmd + S).
Since LR stores all changes in the catalog, you do not need to be worried about the "metadata conflict" message. You can simply ignore it - unless you need to view thje changes you made in LR in Bridge or another Adobe program.
WW

10.4.7 Upgrade - WebKit.Framework error - Symbol not found

i get the following error whenever i start applications such as Yahoo Messenger 3.0 Beta, Mail, Software Installer.
Link (dyld) error:
Symbol not found: __ZN3KJS9ObjectImpC2Ev
Referenced from: /System/Library/Frameworks/WebKit.framework/Versions/A/Frameworks/WebCore.frame work/Versions/A/WebCore
Expected in: /System/Library/Frameworks/WebKit.framework/Versions/A/Frameworks/JavaScriptCor e.framework/Versions/A/JavaScriptCore
1. i suppose i didn't restart properly after the update - i just switched off!
2. After then it took me two days to figure out that to boot in Safe mode - the system was nto allowing me to boot saying 'You need to restart the machine. Holder power button for several seconds or press restart'.
3. Once i started with Safe mode then i am able to boot and login in normal mode.
4. but the above error is reported whenever i start those applications.
5. i tried installing the 0.4.7 update again - but Software Installer.app fails again reporting the above error.
6. is there any way to replace the WebKit.FrameWork folder alone - or what am supposed to do now?
thanks
pRasanna

Update.
Re-installed Quicktime 7.1.3
Re-installed OSX 10.4.7 updater (stand alone).
No change in problems.
1. Wigets gone
2. SW update crashes
3. Safari will not launch.
Dave

IMAP accounts locked out - small triangle lock error symbol

I use Apple Mail to read several Gmail IMAP accounts. Mostly, it works fine. I've used Gmail IMAP since IMAP was offered.
Every so often, one or more of the accounts will lock out. Apple Mail will display a small upward pointing triangle error symbol enclosed in a small circle, next to the account name. When I click that triangle error symbol, it explains "There may be a problem with the mail server or network. Check the settings for account. The server error encountered was: Too many simultaneous connections. (Failure).
I have 6 IMAP accounts connected, but I hear other people manage that number fine.
The largest IMAP account has around 3GB of data, and I've heard that people get to 6GB with Apple Mail handling that well.
So I don't know why this happens. It is intermittent.
Using the latest 10.5.7 Leopard Mail.

The too many simultaneous connections is from gmail, not Mail. Google limits the number of simultaneous connections to their server to prevent someone from hacking into your gmail account. It mostly prevents me from reading my email.
When Mail opens a connection to an IMAP account, it generates multiple connects to allow real-time, upload, download, sync, etc. instead of one connection that must wait for the others to finish. Depending on the positions of the Moon, Sun, and Uranus, Google will identify this as too many connections.
I can usually unlock it by logging into the gmail web interface. I'm not sure why adding the connection clears up the other connections, but there you go.

Phone dead after software update failure - Error symbol

I updated my BB device software, but the update process froze at the very end when the device is supposed to initialze. Now, when I turn on the phone, all I get is an error symbol looking like a crossed out application symbol with the number 543 underneath. When I plug the USB cable in, the computer recognizes the phone and desktop manager finds it as well, however I cannot connect to the device.
Urgent help needed!
Thanks.
Solved!
Go to Solution.

LarsLondon wrote:
I updated my BB device software, but the update process froze at the very end when the device is supposed to initialze. Now, when I turn on the phone, all I get is an error symbol looking like a crossed out application symbol with the number 543 underneath. When I plug the USB cable in, the computer recognizes the phone and desktop manager finds it as well, however I cannot connect to the device.
Urgent help needed!
Thanks.
Error 543 is an OS error. Follow this link to resolve it. If you need any additional help, post back with any specific questions.
If you find a post here helpful, please consider giving the poster some Kudos

Ld:fatal error symbol referencing error using g++

I have setup gcc with path=/usr/bin:/usr/sbin:/opt/sfw/bin:/opt/sfw/sbin:/opt/sfw/include/g++-3:/opt/sfw/lib/gcc-lib/i386-pc-solaris2.8/2.95.2:/usr/include:/usr/lib
I can do # g++ -o test test.cpp
but not # g++ -c test test.o
get -> ld:fatal error symbol referencing error
as well as ->
ostream::operator<<(ostream &(*) /var/tmp/ccvxG011.o
Undefined first referenced
symbol in file
cout /var/tmp/ccvhGO11.o
I also have checked that there is no files
gconfig.h, stdio.h, stdlib.h
This was installed by using the companion cd
as others has done as well.
How do I send output using "cout" if STD C++
gives this error , is certain functions replaced??
a Test file with:
============
<iostream>
main()
cout << "hello world" << endl;
return 0;
should work!!!

Perhaps if you do:
#include <iostream.h>
it will work better?
A little note. Don't put /usr/include in your path and neither should you put the compiler's internal header dir in your path. That will confuse your compiler. The compiler should pick up its path for includes by itself and if you don't pass any arguments to GCC, it picks up its internal include dir and then the system (/usr/include).
If by chance you get a system header and use it with GCC, but should have been the GCC header, you can get strange ld errors. Try gcc -E for more debugging.
Alex

Error Symbol on Final Cut Event

Hi,
I have been working on my FCP project and then realized there's a error symbol sitting on my FC event.
See the attached image.
I was scared so I browsed clips in that event folder and see if there're any broken links. I didn't see anything wrong.
I played my project that's using this event. It works fine too.
Don't know if anyone know how to figure out where problems are exactly.
I worked on my video on an external hard drive. I do backup my files to another external hard drive as well.
I check the event from the other external hard drive and it has no such error symbol.
I am thinking to copy that event over to the drive where I'm actually working. See if this will solve the problems.
As I do backup, I haven't done restoring the files over for FCP projects.
Any ideas?
Thanks.

Tom, Thanks for your feedback.
this thing annoy me the whole day.
i dont know what's missing.
i just copied the files over from my another external backup drive to that event folder.
i thought this would solve the problems. when i opened FCP again, the error symbol is still there.
do you have any ideas?
event is just a folder to store clips. if clips not in use are missing, this shouldn't have any error symbols.
if they are used by the project, the error symbol should appear in the project folder.

WEP Key decrypt error + Symbol 9060

I have a WLC 4400 running ver 3.2.150.6. The LAP is a 1242AG-A-K9. I am getting this error message on the wireless controller log when I try and use my Symbol 9060 RF units the message is:
WEP Key decrypt error. Station MAC Address is 00:a0:f8:ba:b5:36, Base Radio MAC is 00:19:a9:0f:d7:90 and Slot ID is 0.
My setup is WPA using 802.1x and the units do authenicate but then after a random period the users lose their sessions. Actually doesnt seem to matter whether I am using WPA or WEP, i still drop. I havent had this problem with the fat APs. Any ideas?

Cisco is saying the WEP error is a known bug and its a fake message, so that is probably not what is causing the drops. When the clients first started dropping I also noticed another error message but it hasnt show back up till today when i put more client guns back in use. the error is:
WPA MIC Error counter measure activated on Radio with MAC 00:19:a9:0f:bd:80 and Slot ID 0. Station MAC Address is 00:a0:f8:d2:34:98 and WLAN ID is 1.
Any thoughts?

Plugin error - symbol not found - WL7.0 - IPlanet6 - Soalris8

I am using IPlanet6 and WebLogic 7.0.2, on Solaris 8.
I have installed the plugin by adding the following lines to the magnus.conf:
Init fn="load-modules" shlib=/apps/enterprise/6.0SP4/plugins/libproxy.so
funcs="wl_proxy, wl_init"
Init fn="wl_init"
and the following lines to the obj.conf:
<Object name="proxy_all_to_weblogic" ppath="/">
Service fn="wl_proxy" WebLogicHost="my_host_name" WebLogicPort="7200"
</Object>
I receive the following IPlanet error when I try to start the server:
failure ( 1226): Configuration initialization failed: Error running init function
load-modules: dlsym for wl_init failed (ld.so.1: ns-httpd: fatal: wl_init: can't
find symbol)
It looks as if this is failing when the wl_init function is called in magnus.conf.
Although if I comment out the line "Init fn="wl_init", I get the same error.
I read one post here that said the function names had changed between 6.1 and
7.0, from "wl-init" to "wl_init". So I tried using the older function names with
the same result.
My next approach is to try this under IPlanet 4.1 to see if I get the same result.

I had a space between the function names (funcs="wl_proxy, wl_init" should have
read funcs="wl_proxy,wl_init" )in the magnus.conf. Apparently the server couldn't
handle that extra space.
"George Simpson" <[email protected]> wrote:
>
I am using IPlanet6 and WebLogic 7.0.2, on Solaris 8.
I have installed the plugin by adding the following lines to the magnus.conf:
Init fn="load-modules" shlib=/apps/enterprise/6.0SP4/plugins/libproxy.so
funcs="wl_proxy, wl_init"
Init fn="wl_init"
and the following lines to the obj.conf:
<Object name="proxy_all_to_weblogic" ppath="/">
Service fn="wl_proxy" WebLogicHost="my_host_name" WebLogicPort="7200"
</Object>
I receive the following IPlanet error when I try to start the server:
failure ( 1226): Configuration initialization failed: Error running
init function
load-modules: dlsym for wl_init failed (ld.so.1: ns-httpd: fatal: wl_init:
can't
find symbol)
It looks as if this is failing when the wl_init function is called in
magnus.conf.
Although if I comment out the line "Init fn="wl_init", I get the same
error.
I read one post here that said the function names had changed between
6.1 and
7.0, from "wl-init" to "wl_init". So I tried using the older function
names with
the same result.
My next approach is to try this under IPlanet 4.1 to see if I get the
same result.

Cannot load program sqlplus, error Symbol ___strcmp64 is not exported from dependent module /usr/lib/libc.a[shr_64.o]

Dear all,
We are expriencing an error after a redirected restore, we are restored a backup of a prod system on a new host.
While running a 'brrestore' command to get the restore, it returns the following error:
BR0401I BRRESTORE 7.40 (8)
BR0169I Value 'util_file_online' of parameter/option 'backup_dev_type/-d' ignored for 'brrestore' - 'util_file' assumed
BR0405I Start of file restore: reojarkx.rsb 2014-07-23 16:48:47
BR0484I BRRESTORE log file: /oracle/SID/sapbackup/reojarkx.rsb
BR0278E Command output of '/oracle/SID/112_64/bin/sqlplus':
exec(): 0509-036 Cannot load program sqlplus because of the following errors:
        0509-130 Symbol resolution failed for sqlplus because:
        0509-136   Symbol ___strcmp64 (number 71) is not exported from
                   dependent module /usr/lib/libc.a[shr_64.o].
        0509-136   Symbol ___strcpy64 (number 76) is not exported from
                   dependent module /usr/lib/libc.a[shr_64.o].
        0509-136   Symbol __setjmp (number 78) is not exported from
                   dependent module /usr/lib/libc.a[shr_64.o].
        0509-192 Examine .loader section symbols with the
                 'dump -Tv' command.
BR0280I BRRESTORE time stamp: 2014-07-23 16:48:47
BR0279E Return code from '/oracle/SID/112_64/bin/sqlplus': 255
BR0302E SQLPLUS call for database instance SID failed
BR0406I End of file restore: reojarkx.rsb 2014-07-23 16:48:47
BR0280I BRRESTORE time stamp: 2014-07-23 16:48:47
BR0404I BRRESTORE terminated with errors
Can someone help to get the reason of this issue.
Thanks, regards

Roman,
how can you know that it is about AIX? The OP didn't tell us.
Besides that, I agree that different OS versions may be the root cause.
regards

Docuprestment service start error (symbol lookup error)

hi everyone,
I am using Documaker EE on linux environment and unable to start the docupresentment and docfactory service:
The following error occurs:
docupresentment service error:
[oracle@istream-devlinux3 docupresentment]$ ./docserver.sh start
docserver.sh: INFO: Docupresentment ulimit settings:
core file size (blocks, -c) 0
data seg size (kbytes, -d) unlimited
scheduling priority (-e) 0
file size (blocks, -f) unlimited
pending signals (-i) 44934
max locked memory (kbytes, -l) 50000000
max memory size (kbytes, -m) unlimited
open files (-n) 131072
pipe size (512 bytes, -p) 8
POSIX message queues (bytes, -q) 819200
real-time priority (-r) 0
stack size (kbytes, -s) 10240
cpu time (seconds, -t) unlimited
max user processes (-u) 131072
virtual memory (kbytes, -v) unlimited
file locks (-x) unlimited
[oracle@istream-devlinux3 docupresentment]$ 2011-12-13 02:08:38,539- INFO-[WD-Watchdog-main]-[?:?]-com.docucorp.watchdog.Watchdog.watch: Oracle Docupresentment Watchdog Server
2011-12-13 02:08:38,711- INFO-[WD-Watchdog-main]-[?:?]-com.docucorp.watchdog.Watchdog.watch: Version 200.024
2011-12-13 02:08:38,846- INFO-[WD-Watchdog-main]-[?:?]-com.docucorp.watchdog.Watchdog.watch: Running Java version 1.6.0_24-b07 from Sun Microsystems Inc. on Linux 2.6.18-194.el5xen with 4 processors.
idswatchdog.exe: symbol lookup error: /usr/oracle/oracle_insurance_1/documaker/bin/libnpc.so: undefined symbol: _ZN5NPipeC1ElPciii
docfactory service error:
[oracle@istream-devlinux3 bin]$ ./docfactory.sh start
docfactory.sh: INFO: DocumentFactory ulimit settings:
address space limit (kbytes) (-M) unlimited
core file size (blocks) (-c) 0
cpu time (seconds) (-t) unlimited
data size (kbytes) (-d) unlimited
file size (blocks) (-f) unlimited
locks (-L) unlimited
locked address space (kbytes) (-l) 50000000
nofile (-n) 131072
nproc (-u) 131072
pipe buffer size (bytes) (-p) 4096
resident set size (kbytes) (-m) unlimited
socket buffer size (bytes) (-b) 4096
stack size (kbytes) (-s) 10240
threads (-T) not supported
process size (kbytes) (-v) unlimited
[oracle@istream-devlinux3 bin]$ docfactory_supervisor: symbol lookup error: /usr/oracle/oracle_insurance_1/documaker/bin/libnpc.so: undefined symbol: _ZN5NPipeC1ElPciii
could anybody help me solve this error
thanks in advance.
Edited by: user13050759 on Dec 12, 2011 9:12 PM
Edited by: user13050759 on Dec 13, 2011 3:20 AM
Edited by: user13050759 on Dec 13, 2011 3:22 AM

I suspect the unresolved symbol is environmental. What distribution, gcc c and c++ runtime are installed? This symbol is contained in the libnpc.so shared object when I run nm on the DSO that is supposed to load.

Linker Error : 'symbols names listed in - exported_symbols_list

I am facing the probem with X code while linking the project for a specific target with the error code :'symbols names listed in - exportedsymbolslist
This symbol is defined under an .EXP file .. I guess that at runtime Linker is not able to find the symbol defined under the .EXP file.
If I delete the entry from that EXP file the error certainly goes and I am able to link the project. But I think that this is not correct fix as Probabely after linking at launching time the system could ask for the symbol which we deleted from the EXP file.
Somebody can answer me that what is other and feasable way to do this Should there be any file which is defining the deleted Sybmol from EXP.
--> Pointer-----> That deleted entry is the name of a function defined in a source file.........
Pls respond it would be highly appriciated..
Pro Mac OS X (10.5.2)

Post to the Developer's forums under OS X Technologies, that's where those gurus hang out.

Linker Error-symbols names listed in - exported_symbols_list Exit Status 1

I am facing the probem with X code while linking the project for a specific target with the error code :'symbols names listed in - exportedsymbolslist
This symbol is defined under an .EXP file .. I guess that at runtime Linker is not able to find the symbol defined under the .EXP file.
If I delete the entry from that EXP file the error certainly goes and I am able to link the project. But I think that this is not correct fix as Probabely after linking at launching time the system could ask for the symbol which we deleted from the EXP file.
Somebody can answer me that what is other and feasable way to do this Should there be any file which is defining the deleted Sybmol from EXP.
--> Pointer-----> That deleted entry is the name of a function defined in a source file.........
Pls respond it would be highly appriciated..

Post to the Developer's forums under OS X Technologies, that's where those gurus hang out.

Linker error: symbol(s) not found

Hello everyone,
I'm building my first Cocoa app (well, other than my "hello world"). I'm running into a strange problem when I try to build. The linker gives me the following error when I try to init a custom class (called 'RailsApp'):
Undefined symbols:
".objcclass_nameRailsApp", referenced from:
literal-pointer@_OBJC@__clsrefs@RailsApp in MainController.o
ld: symbol(s) not found
collect2: ld returned 1 exit status
Now, there is an import statement in the header file to the 'RailsApp' header file. I've tried moving this around, etc to no avail. I really don't know what else I should do.
If anyone can help a beginner it'd be greatly appreciated!
Ernest

I know this question has been answered - but I thought this might help someone:
I had added the security framework via the method above (right click on frameworks > add existing frameworks...) but only applied it to my Main.app as a target.
I have a small bundled app which implements a 'request for admin password' when running a sudo command within my main app. I had to delete the security framework and add it again to apply it to the both the bundled app as well as my main app.
It's confusing as I hadn't realised it needed to be bound to both - nor in fact realised that the framework, when it exists isn't visible to both - but happy I've solved this problem. Hope this is useful to someone.

*** Error symbol

Similar Messages

Maybe you are looking for