Error synchronizing

I GET AN ERROR CODE: 0X80040FB3 WHEN SYNCHRONIZING THE CONTACTS. WHAT DOES IT MEAN AND WHAT SHOULD I DO?
TONY

Hi there,
Here are some reference materials for you:
http://hubpages.com/hub/What-People-Think-When-You-Type-in-All-Caps
KB14818 "Error Encountered 0x80040FB3, Check Documentation" error appears during a wired synchronization
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Similar Messages

  • Outlook Calendar Error Synchronizing folder

    Hello Forum,
    For some reason, some of our win7 users running outlook 2010 in 2010 exchange server receives synchronization log message
    every morning, the users did shared calender and all have permission to view each others calendar.  please see the error below
    8:26:27 Synchronizer Version 12.0.6423
    8:26:27 Synchronizing Mailbox 'Tona Bobling'
    8:26:27 Synchronizing Hierarchy
    8:29:28 Synchronizing server changes in folder 'Gina Candy - Calendar'
    8:29:28 Downloading from server 'xxxxxxx.xxxx.com'
    8:29:28 Error synchronizing folder
    8:29:28 [80070005-508-80070005-560]
    8:29:28 You do not have sufficient permission to perform this operation on this object.  See the folder contact or your system administrator.
    8:29:28 Microsoft Exchange Information Store
    8:29:28 For more information on this failure, click the URL below:
    8:29:28 http://www.microsoft.com/support/prodredirect/outlook2000_us.asp?err=80070005-508-80070005-560
    8:29:29 Uploading to server 'xxxxxxx.xxxx.com'
    8:29:30   1 view(s)/form(s) updated in online folder
    8:29:30 Done
    8:30:02 Microsoft Exchange offline address book
    8:30:02 Download successful
    Please how do i correct this error.
    Regards,

    Hi Evan,
    I did as you have stated (remove the shared calendar) but still getting the same error msgs every day. And this is one of them as of today:
    6:57:11 Synchronizer Version 14.0.6025
    6:57:11 Synchronizing Mailbox 'Dave Greg'
    6:57:11 Synchronizing Hierarchy
    6:57:11 Synchronizing server changes in folder 'Inbox'
    6:57:11 Downloading from server 'xxxxxxxx.xxxxx.xxx'
    6:57:13
       5 item(s) added to offline folder
    6:57:14 Synchronizing server changes in folder '117101 - 1 Valhalla Condos, Tower A'
    6:57:14 Downloading from server 'xxxxxxxx.xxxx.xxx'
    6:57:14 Synchronizing server changes in folder 'Sent Items'
    6:57:14 Downloading from server 'xxxxxxxx.xxxx.xxxx'
    6:57:14 Synchronizing local changes in folder 'Deleted Items'
    6:57:14 Uploading to server 'xxxxxxx.xxxxx.xxx'
    6:57:15
       1 item(s) deleted in online folder
    6:57:15 Synchronizing server changes in folder 'Gina Ha - Calendar'
    6:57:15 Downloading from server 'xxxxx.xxxx.xxx'
    6:57:15 Error synchronizing folder
    6:57:15
     [80070005-508-80070005-560]
    6:57:15
     You do not have sufficient permission to perform this operation on this object. 
    See the folder contact or your system administrator.
    6:57:15
     Microsoft Exchange Information Store
    6:57:15
     For more information on this failure, click the URL below:
    6:57:15
     http://www.microsoft.com/support/prodredirect/outlook2000_us.asp?err=80070005-508-80070005-560
    6:57:15 Synchronizing Views
    6:57:15 Downloading from server 'xxxxxxx.xxxx.xxx'
    6:57:15 Done
    6:57:41 Microsoft Exchange offline address book
    6:57:41 Download successful
    Please any other method to resolve this error .
    Regards,

  • Error synchronizing folder

    for some reason, all of our win7 clients running outlook 2010 in cached exchange mode receive thousands of synchronization log message every morning when they wake their desktops. anecdotally seems to be worse if they leave outlook running overnight, also
    if they allow the computer to turn off the network device to save power. has anybody seen this behavior before?
    7:04:21 Synchronizer Version 14.0.4760
    7:04:21 Synchronizing Mailbox 'stark, tony'
    7:04:21 Synchronizing Hierarchy
    7:04:25 Synchronizing server changes in folder 'luthor, lex - Calendar'
    7:04:25 Downloading from server 'mail.example.com'
    7:04:25 Error synchronizing folder
    7:04:25            [80070005-508-80070005-560]
    7:04:25            You do not have sufficient permission to perform this operation on this object.  See the folder contact or your system administrator.
    7:04:25            Microsoft Exchange Information Store
    7:04:25            For more information on this failure, click the URL below:
    7:04:25           
    http://www.microsoft.com/support/prodredirect/outlook2000_us.asp?err=80070005-508-80070005-560
    7:04:25 Synchronizing server changes in folder 'richards, reed - Calendar'
    7:04:25 Downloading from server 'mail.example.com'
    7:04:25 Error synchronizing folder
    7:04:25            [80070005-508-80070005-560]
    7:04:25            You do not have sufficient permission to perform this operation on this object.  See the folder contact or your system administrator.
    7:04:25            Microsoft Exchange Information Store
    7:04:25            For more information on this failure, click the URL below:
    7:04:25           
    http://www.microsoft.com/support/prodredirect/outlook2000_us.asp?err=80070005-508-80070005-560
    7:04:25 Done
    7:04:25 Microsoft Exchange offline address book
    7:04:25 Download successful

    Hello,
    80070005 means a permission issue.
    It seems the “stark tony” user have the permission issue when syncing the the “luthor, lex” and “richards, reed”
    user’s calendars.
    Please verify if the “luthor, lex” and “richards, reed” have grant the appropriate permissions for the “stark tony”
    user.
    To workaround this, delete the shared calendar of “luthor, lex” and “richards, reed” users in “stark tony” Outlook.
    Thanks,
    Simon

  • Error synchronizing folder [8004010F-501-8004010F-0] - Exchange 2010 and Outlook 2010, multiple users get dozens of these per day

    15:27:30 Synchronizer Version 14.0.6025
    15:27:30 Synchronizing Mailbox 'abc xyz'
    15:27:30 Error synchronizing folder
    15:27:30
     [8004010F-501-8004010F-0]
    15:27:30
     The client operation failed.
    15:27:30
     Microsoft Exchange Information Store
    15:27:30
     For more information on this failure, click the URL below:
    15:27:30
     http://www.microsoft.com/support/prodredirect/outlook2000_us.asp?err=8004010f-501-8004010f-0
    15:27:30 Done
    kbj

    Hi,
    Please try below steps:
    - Remove all organizational forms libraries (subfolders under EFORMS Registry) if they are not needed, and re-create the Outlook profile of affected users.
    - Alternatively, if the organizational forms libraries are needed, remove the replica from Exchange 2010 and re-add it
    Best Regards!

  • Windows 7 DVD Maker "Error Synchronizing Project"

    I installed Windows 7 RC 7100 on a new hard disk and did not install any other software.
    I tried to create a DVD-Video by inserting JPG images, AVI files and some MP3 files as slide background music. I was not able to Preview the movie and when I tried to burn it to DVD, it complained "Error Synchronizing Project".
    I confirmed temp directory exist and tried to deselect all filters / individual filter, still the same. I tried to install DIVX AVI Codec still the same. Then I suspect I have included too many JPG/AVI files. After consolidating some AVI files, it did burn a DVD successfully. Great, however I found the background music for slides were gone. I open the saved project again, "Error Synchronizing Project" popped up again! Any solution?

    I upgraded to Win 7 from Vista due to the DVD software supposedly being upgraded in 7 - if it is so, not by much.
    Things I've learned over the hours:
    -Win DVD Maker does not generally like music MP3s - I never saw that in the literature, but trial and error suggest that it should be added to the literature for this software.
    -The default location for temp and saved DVD files is in your My Videos file.
    -When you save a DVD compilation, you are really just saving a TEXT FILE that tells the computer what to play next (it is a laundry list, in order, of your file locations in DOS-like language.)  It is edit-able!
    -If you get "locked out" of your DVD file by (among other things) the error that we are discussing here, you can do as I did for a large project that I had 4 hours in and then could not burn -
    -I opened the *.msdvd file (see location above) and very carefully deleted just the music files from the text file (opened with the software called Notepad in Accessories in the Start Menu).  Music files are near toward the end of the file.  You
    could also find a file (among the sea of file locations in an endless string of file locations) that you think might be cluprit and delete it in this way.  MAKE AN EXTRA COPY OF YOUR DVD COMPILATION FILE BEFORE YOU TRY THIS EDITING, INCASE YOU ACCIDENTALLY
    MAKE IT UNOPENABLE.
    -The trouble is that you can only save it then with a *txt suffix by Notepad - so you save it to the same location as your other video files, and then RENAME the file with the *.MSDVD suffix.  Once you do that, the DVD Maker will open the file - and
    the music will be missing.
    Use a converter to change your MP3 music to WMA, and re-add the music, and it should work.
    The software is glitchy and has unstated rules, but will do the job if you don't deviate.
    -I also recommend that you do NOT move any files location nor move folders around between the time you finish your DVD project and the time you burn - it won't find your files if you do, and you'll get error messages and no burn.
    -I do not work for MCRSFT (but I recently stayed at a Holiday Inn express...)  bad humor, old commercial.  I bear no responsibility for your loss if you try this and your computer explodes or other calamities.  Just trying to help

  • Windows DVD Maker "Error Synchronizing Project"

    I keep getting this message: error synchronizing project when i go to hit next in windows dvd maker.  I have looked through all the threads with this topic and nothing works.  Can anyone help. I am trying to burn a dvd with a movie I made on
    windows live movie maker.  

    Open Windows DVD Maker by clicking the Start button
    . In the search box, type
    DVD Maker, and then, in the list of results, click Windows DVD Maker.
    On the Turn your digital memories into a DVD page, click Choose Photos and Videos.
    On the Add pictures and video to the DVD page, click Options.
    Choose DVD playback settings. Select one of the following options, depending on how you want your DVD to play:
    If you want the DVD menu to display when the disc is inserted into a DVD player, click
    Start with DVD menu.
    If you want the video to play automatically when the disc is inserted in a DVD player and show the menu at the end, click
    Play video and end with DVD menu.
    If you want the video to play automatically and loop continuously, click
    Play video in a continuous loop. You will still be able to view the menu if you press the
    Menu button on the remote control for your DVD player.
    DVD aspect ratio. This option lets you determine if a slide show on the DVD is displayed at a
    4:3 (standard) or 16:9 (widescreen) aspect ratio. The aspect ratio is expressed as the relation of the width to the height of the slide show. When deciding which aspect ratio to choose, consider the aspect ratio for the monitor or
    TV on which your slide show will be played.
    Video format. This option lets you choose the video format that will be used for the video on your DVD. The options are
    NTSC and PAL. Most of the time you will not need to change this setting. However, you might need to change it if you plan to share your DVD with friends or family who live in a part of the world that uses a different video format.
    The video format that is selected by default is based on the Region and Language settings in Control Panel.
    DVD burner speed. This option lets you select the speed to burn your DVD. The default is
    Fastest. Some DVD burners won't burn at full speed if you're using certain kinds of DVDs. If you have a problem burning a disc, try selecting
    Medium or Slow.
    Temporary file location. If you want to change the storage location for temporary files that are created when making a DVD, click
    Browse, select the new folder location, and then click OK.
    For the best results when choosing a temporary file location, choose a folder on a hard disk drive partition that has at least 5 gigabytes (GB) of available disk space and a fast write speed.
    Click OK to close the DVD Options dialog box, and then continue making your DVD.
    love is rock!!!

  • Palm Treo 800w Error Synchronizing Work Email and ActiveSync screen problems

    For some reason, yesterday my email stopped synchronizing.  Anytime I hit the "send/receive", it looks like it's going through the process but I get an "error synchronizing" error.  Normally it is on auto synch. My other email accounts work just fine.  When I go into the "ActiveSync" through programs to delete the acct and start over, the activesych screen just disappears within a second of me opening it.  I can't keep it open for me to make any edits or see if I can get a specific error message. Any thoughts? Not sure if Sprint can solve this or if I would have to go through Palm to troubleshoot?? 
    Post relates to: Treo 800w (Sprint)

    If you need help, you can always go to a corporate Sprint service store. To find one near you, go to http://storelocator.sprint.com/StoreLocator/Searchform.aspx. Enter your zip code in the box and choose the radio button that says "Repair centers near me".
    However, they are most likely going to just do what you can on your own to start with and that is a hard reset. A hard reset erases all data on the phone and returns it to the default factory settings. Backup any data that you need to keep and then go to http://kb.palm.com/SRVS/NUA/launchKB.asp?c=41108 for instructions on how to hard reset. Once you have reset your device, you will then need to reinstall any software that you added, restore your backed up data, etc. You might find the following link helpful when setting up your device again: http://kb.palm.com/SRVS/NUA/launchKB.asp?c=40086.
    Also, make sure to install the available patches on your device: http://kb.palm.com/SRVS/NUA/launchTab.asp?t=downloads&fn=treo&mn=800w&cn=sprint.
    Message Edited by wwejason on 04-09-2009 05:52 PM

  • There was an error synchronizing your folder hierarchy. Error : 80041004

    I have a brand new install of Windows 7 Ultimate 64-bit. New install of Office 2010 with Hotmail Connector.
    I cannot receive emails to Outlook for my Hotmail account. I tried to delete then re-add the Hotmail account in Outlook. No luck.
    Sync log:
    9:12:12 Synchronizer Version 14.0.5139
    9:12:12 Synchronizing Mailbox
    '[email protected]'
    9:12:12 Synchronizing Hierarchy
    9:12:12
       1 folder(s) updated in online store
    9:12:12 Synchronizing local changes in folder 'Contacts'
    9:12:17
       32 item(s) deleted in online folder
    9:12:17 Synchronizing local changes in folder 'Inbox'
    9:12:17 Error synchronizing folder
    9:12:17
     [80041004-0-0-430]
    9:12:17 Synchronizing local changes in folder 'Deleted Items'
    9:12:17 Error synchronizing folder
    9:12:17
     [80041004-0-0-430]
    9:12:17 Error with Send/Receive.
    9:12:17 There was an error synchronizing your folder hierarchy. Error : 80041004.
    9:12:17 Synchronizing server changes in folder 'Calendar'
    9:12:17 Synchronizing server changes in folder 'Contacts'
    9:12:18 Synchronizing server changes in folder 'Drafts'
    9:12:18 Synchronizing local changes in folder 'Inbox'
    9:12:18 Error synchronizing folder
    9:12:18
     [80041004-0-0-430]
    9:12:18 Synchronizing server changes in folder 'Sent Items'
    9:12:18 Synchronizing local changes in folder 'Deleted Items'
    9:12:18 Error synchronizing folder
    9:12:18
     [80041004-0-0-430]
    9:12:18 Synchronizing server changes in folder 'Junk E-mail'
    9:12:18 Done
    9:12:30 Network operation failed
    9:12:30
    9:12:30
    *Request*      
    9:12:30 09:12:18:0309
    9:12:30 POST
    9:12:30 
    http://
    9:12:30 sn127ds.mail.services.live.com
    9:12:30 /DeltaSync_v2.0.0/Settings.aspx
    9:12:30
    9:12:30 <?xml version="1.0" encoding="utf-8"?><Settings xmlns="HMSETTINGS:"><ServiceSettings><SafetySchemaVersion>1</SafetySchemaVersion><SafetyLevelRules><GetVersion/></SafetyLevelRules><SafetyActions><GetVersion/></SafetyActions><Properties><Get/></Properties></ServiceSettings><AccountSettings><Get><Options/><Properties/></Get></AccountSettings></Settings>
    9:12:30
    *Response* 
    9:12:30 00:00:00:0000
    9:12:30
    9:12:30

    Hi,
    Is there any other older version of Outlook present on the computer?
    Step 1: Try to remove and re-add the account in Outlook and check.
    To remove the account.
    Launch MS Outlook 2010 and click the Office button which is located in the top left corner, now under the Info category you will see the Account Settings option, click
    the drop down button and choose remove account.
    To add the account.
    Launch MS Outlook 2010 and click the Office button which is located in the top left corner, now under the Info category you will see the Account Settings option, click the drop down button and choose Add Account.
    In the next step, select Email Accounts, enter Your Name, Email Address, and Password and click next.
    It will take a couple of minutes to complete the required configuration.
    Click Finish and it will start downloading your emails.
    Step 2: Create new profile and add the account and check.
    To create new profile, follow this link:
    http://support.microsoft.com/KB/829918
    once you create new profile, add the account in Outlook by following the instructions in step1.
    Best Regards,
    Nick Wan
    =============================
    Come back and mark the replies as answers if they help and unmark them if they provide no help.

  • 'error synchronizing audio to midi" trouble with MACBOOK

    I cant get logic running smoothly, with only ultrabeat and a few plug ins opened the trouble starts with 'error synchronizing audio to midi"
    I get pops and clicks and delays in the sound when i use logic, i also have the random shutdown problem and the cpu whine.
    Ive already tried all solutions of this list
    http://docs.info.apple.com/article.html?artnum=304113
    I use an RME Fireface 400, but the trouble also occurs with the onboard soundcard.

    Have you tried increasing your audio buffer size within Logic?
    Have you installed Pro Apps tool for Logic?
    Have you got the latest drivers and firmware installed for your Fireface 400?
    It would help if you included in your forum profile the specification of your Mac as well!

  • BPM Error: Synchronous Send Step

    Hi All,
      I am getting the below error in the synchronous send step of my BPM.
    Interface urn:Haworthinc.com:India_Tax SIAA_IndiaTax_DBSelect_TICUSEXT has multiple operations
    I am trying to send a query and get data from a table in this step. I have an abstract synchronous interface attached to this step and I have an inbound synchronous interface at the configuration side as the receiver for the BPM sync. interface.
    The errored out interface is the abstract interface used as the response message at the BPM sync step.
    Does anyone has encountered this before?
    additional error info)(
    Work item 000000364714: Object CL_SWF_XI_MSG_BROKER method SEND_SYNCHRON cannot be executed
    Message no. WL821
    Diagnosis
    The calling of the object method for the work item ended with a return value for which no handling is modeled in the workflow.
    System Response
    The work item was forced into the error status.
    Procedure
    Refer to your workflow system administrator.
    Procedure for System Administration
    Also check the binding between the task container and the method container.
    Appreciate your help!
    Regards,
    Shiny

    Hi,
    e urn:Haworthinc.com:India_Tax SIAA_IndiaTax_DBSelect_TICUSEXT has multiple operations
    Are u using 7.1 versin of PI, if so can u check if u r consistently using operation name in interface
    Babu

  • Error synchronizing subscribed folders in MS Outlook 2010

    I get this error message when I open MS Outlook 2010 in Windows 7 after creating a new email profile 
    !  Task 'Synchronizing subscribed folders for ( my email address )' 
    reported error (0x800CCC0F) : 'Outlook cannot synchronize subscribed folders for  ( my email address ). 
    Error: This IMAP command cannot be sent to the server before the connection was terminated. If you continue to receive this message, contact your server administrator or Internet service provider (ISP)' How can I fix this problem, please?

    Solution
    Navigate to
    File >> Options >> Advanced
    >> scroll down to the send/receive heading >> click on the send/receive button on the right
    On the right hand side of the send/receive groups window that opens click on the
    Edit button
    Un-check the "Get folder unread count for subscribed folders"
    Under Received mail items, check the option "User the custom behavior defined below"
    In the window below that displays your Gmail folders just select inbox and leave the others unchecked
    Click Ok and then exit out of options and perform a send/receive to test if it is now working
    This worked for me.

  • Error synchronizing folders in Outlook 2010

    I have an IMAP account set up on Outlook 2010 using Windows Vista and every so often (not all the time), I get the following message:
    Task 'Synchronizing subscribed folders for [email protected]' reported error (0x800CCC0E) : 'Outlook cannot synchronize subscribed folders for [email protected] Error: Cannot connect to the server. If you continue to receive this message, contact your
    server administrator or Internet service provider (ISP).'
    I thought it may be my McAfee anti-virus, but I disabled the firewall and continued to get the message. This error doesn't always pop up and the folders do sync most of the time. It's only sometimes I get this error. Any idea what is the cause and how
    to resolve? Thanks.

    I know that you disable the McAfee anti-virus but no avail. Have you also turn off the email integration(scanning) option? If not, please try it.
    Some people reported that they resolved it after uninstalling McAfee and then re-install it without the email integration(scanning) option.
    Tony Chen
    TechNet Community Support

  • Error Synchronizing Calendar using Desktop Manager 4.7, Outlook 2003, on the Storm

    I just installed Desktop Manager on my PC (Windows XP).
    Contacts sync fine.
    Calendar does not sync:
    "Reading Device Calendar" goes fine.
    "Processing Device Calendar" goes fine.
    "Reading from MS Outlook Calendar" is where the error happens:
    Desktop Manager begins reading the 988 Outlook items and consistently stops at item #227, with one of two error messages:
    1) "Intellisync, Unknown Error Reported" or
    2) "Operation Terminated Unexpectedly."
    I followed directions for:
    How to turn on advanced logging for Intellisync due to BlackBerry smartphone synchronization failureat
    http://www.blackberry.com/btsc/microsites/search.do?cmd=displayKC&docType=kc&externalId=KB01451&slic...
    This operation required that I modify the iloptcfg.cfg file.
    Still no luck. any suggestions?
    Solved!
    Go to Solution.

    there is a method involving enabling detailed logs on the Desktop Manager. Then it will give information about that 227th item. check the forum or th public knowledge base (click on the "SUPPORT" button on top of the present page)
    if I were you, I'd just wipe the calendar database on the device, do the sync, and when it stops : open the calendar on the device and see the last event synchronized. it should be the 226th.
    The search box on top-right of this page is your true friend, and the public Knowledge Base too:

  • Error synchronizing learning objectives

    Hi All,
    I am facing with the following error when I am trying to synchronizing learning objectives in Authoring environment.
    ""A fatal error occurred when synchronizing the off-line objectives catalog with online objectives catalog""
    Also the following description is shown along with the error,
    Type=E,ID=LSO,Number=005,Parameter=",Message='Transport connection is active,no changes possible"
    com.sap.hcm.ls.shared.datamodel.ebo.EBOCatalogException
    Any help is really apppreciated
    Thanks in anticipation
    Regards
    Santhosh

    Hi All,
    We managed to find a solution for this.It is like this,the client which we were connecting to is a customizing client.
    That is why Authoring environment,was not able to update Learning Objectives in R3 as it has to create a request for evry update.
    So we deactivated  Transport by modifying the Table  T77S0,I changed change the value for GSVAL to "X" whereGRPID=TRSP and SEMID=CORR
    which means No Transport.
    Now every thing works fine.
    Regards,
    Santhosh

  • Error Synchronizing BB 8330 with MS Outlook

    I have tried several times to synchronize my calendar with Outlook and I get a dialog it says "Error encountered. Error code - 0x80040fb3. Check documentation.
    I have made a search in BB web site but I do not found anything.
    Can any one give me any tip.
    Thanks in advance.
    Solved!
    Go to Solution.

    Hoping you would have had an answer by now...
    the last part of the Blackberry intellisync tif.log reads:
     ILTIFGetField2.3 (rc=0) 48 Direct Connect ==> len=1, val="\00"
    ILTIFGetField2.3 (rc=0) 49 Categories ==> len=29, val="Leisure Exhibit Moscow Sep07\00"
    ILTIFGetField2.3 (rc=0) 60 Picture ==> len=506, val="MIME-Version: 1.0\0aContent-Type: Multipart/Mixed;\0a  boundary="---...--Boundary-00=_CDYZRAAE2ROOO49D7TH0--\0a\00"
    ILTIFGetField.2 (rc=0) 60 Picture ==> len=506, val="MIME-Version: 1.0\0aContent-Type: Multipart/Mixed;\0a  boundary="----...--Boundary-00=_CDYZRAAE2ROOO49D7TH0--\0a\00"
    ILTIFGetField2.3 (rc=0) 61 Yomi Company Name ==> len=1, val="\00"
    ILTIFGetField2.3 (rc=0) 62 Yomi First Name ==> len=1, val="\00"
    ILTIFGetField2.3 (rc=0) 63 Yomi Last Name ==> len=1, val="\00"
    ILTIFGetField2.3 (rc=0) 64 Birthday ==> len=1, val="\00"
    ILTIFGetField2.3 (rc=0) 65 Anniversary ==> len=1, val="\00"
    ILTIFGetField2.3 (rc=0) _appData ==> len=0, val=""
    ILTIFGetField2.3 (rc=0) _subType ==> len=2, val="0\00"
    RejectOutcome, ec=4019
    TIFTerminate
    How to fix it?
    Why is it broken?
    How can I prevent it from happening in the future?
    How can Blackberry developers prevent it from happening in the future?
    thanks,
    Dennis

Maybe you are looking for

  • Radio Button Groups

    Hi I am trying to create two radio button groups, one which contains other text buttons and names buttons, in this group only other text button or names can be chosen. But then within the other group I have all the names buttons, but i only want one

  • Transactions documentation and a difficult(?) use-case...

    I would like detailed information about how TransactionMap work with different isolation levels, ie how both changes performed by the application holding the map and in the distributed cache is propagated between them etc. More detailed information a

  • Remove duplicates in oracle table

    Hi, I want to remove duplicates from a Account table Contains 2 column Account_id and Account_type values in Account table are Account_id Account_type 1 GPR 1 GPR 1 GPR I want only one entry and remove other entry with Account_Id = 1 Thanks, Petri

  • SIDs not created when creating hierarchy

    Hello experts I am having a problem with the creation of a hierarchy. The hierarchy is created manually in a z function module. After filling the appropriate parameters, we call the FM RSNDI_SHIE_STRUCTURE_UPDATE3. The execution of the FM renders the

  • Error in CAF NW 7.2 that don't occurs in CAf NW 7.1

    Hi Experts I had a problem to develop a CAF app in NW 7.2. I has an SC with CAF DC developed in NW 7.1 and works fine. I got this one and imported to NW 7.2. This CAF DC have the follow structure: One BO Node: StatusBO. One AS: ExecutorService One AS