Error: SYS-170101 System Exception Signal 6 occurred in the context.
Hi,
The following error appears while executing a job.
SYS-170101 System Exception <Signal 6> occurred in the context.
DS version: BOXI 3.2
Source: Oracle
Target SAP BW
Job Server is on AIX
Has anybody dealt with this error? Any suggestions wil be a great help.
Thanks in advance.
Hitesh
Hi Expert,
I am also facing same error, can anyone please let help in it?
Similar Messages
-
SYS-170101: System Exception
Hello,
A job failed with this error :
(12.2) 07-16-10 16:25:48 (E) (1081374:0001) SYS-170101: System Exception <Signal 9> occurred in the context <>
The version of ou DI is BODS 12.2, running on a AIX machine 5.3
The job read some Sybase IQ tables and updates a table still on Sybase IQ
The job starts the dataflow and then fail
(12.2) 07-16-10 16:08:06 (1146920:0001) DATAFLOW: Data flow <DF_xxx> using PAGEABLE Cache with <3578 MB> buffer pool.
(12.2) 07-16-10 16:25:48 (1081374:0001) WORKFLOW: Work flow <WF_xxx> is terminated due to an error <170101>.
(12.2) 07-16-10 16:25:48 (1081374:0001) JOB: Job <Job_xxx> is terminated due to error <170101>.
Thank you for your helphi,
any help on the below error log...,
4488
6608
SYS-170101
2/5/2014 10:56
|Session TRANS_ARCHIVE102013|Work flow TrArchive 1-31_10_2013|Data flow TARCH_FLOW
4488
6608
SYS-170101
2/5/2014 10:56
System Exception <ACCESS_VIOLATION> occurred. Process dump option is off. Process is not dumped.
4488
6608
SYS-170101
2/5/2014 10:56
Call stack:
4488
6608
SYS-170101
2/5/2014 10:56
(null)
4488
6608
SYS-170101
2/5/2014 10:56
Registers:
4488
6608
SYS-170101
2/5/2014 10:56
RAX=00000000752D1648 RBX=0000000000209AB8 RCX=0000000000209AB8 RDX=0000000000000160 RSI=00000000094D2D90
4488
6608
SYS-170101
2/5/2014 10:56
RDI=0000000009406970 RBP=0000000000000000 RSP=00000000002099C0 RIP=000000007526730A FLG=0000000000010206
4488
6608
SYS-170101
2/5/2014 10:56
R8=0000000000000000 R9=00000000FFFFFFFF R10=0000000000310039 R11=00000000093EA270 R12=0000000000372640
4488
6608
SYS-170101
2/5/2014 10:56
R13=0000000081D6FEC0 R14=000000000020A008 R15=000000000020A030
4488
6608
SYS-170101
2/5/2014 10:56
Exception code: C0000005 ACCESS_VIOLATION
4488
6608
SYS-170101
2/5/2014 10:56
Fault address: 000000007526730A 01:000000000002630A
4488
6608
SYS-170101
2/5/2014 10:56
C:\Windows\WinSxS\amd64_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.4940_none_88df89932faf0bf6\MSVCP80.dll
4488
6608
SYS-170101
2/5/2014 10:56
==========================================================
4488
6608
SYS-170101
2/5/2014 10:56
Collect the following and send to Customer Support:
4488
6608
SYS-170101
2/5/2014 10:56
1. Log files(error_*, monitor_*, trace_*) associated with this failed job.
4488
6608
SYS-170101
2/5/2014 10:56
2. Exported ATL file of this failed job.
4488
6608
SYS-170101
2/5/2014 10:56
3. DDL statements of tables referenced in this failed job.
4488
6608
SYS-170101
2/5/2014 10:56
4. Data to populate the tables referenced in the failed job. If not possible, get the last few rows (or sample of them) when
4488
6608
SYS-170101
2/5/2014 10:56
the job failed.
4488
6608
SYS-170101
2/5/2014 10:56
5. Core dump, if any, generated from this failed job.
4488
6608
SYS-170101
2/5/2014 10:56
==========================================================
4488
6608
SYS-170101
2/5/2014 10:56
|Session TRANS_ARCHIVE102013|Work flow TrArchive 1-31_10_2013|Data flow TARCH_FLOW
4488
6608
SYS-170101
2/5/2014 10:56
System Exception <ACCESS_VIOLATION> occurred. Process dump option is off. Process is not dumped.
4488
6608
SYS-170101
2/5/2014 10:56
Call stack:
4488
6608
SYS-170101
2/5/2014 10:56
(null)
4488
6608
SYS-170101
2/5/2014 10:56
Registers:
4488
6608
SYS-170101
2/5/2014 10:56
RAX=00000000752D1648 RBX=0000000000209AB8 RCX=0000000000209AB8 RDX=0000000000000160 RSI=00000000094D2D90
4488
6608
SYS-170101
2/5/2014 10:56
RDI=0000000009406970 RBP=0000000000000000 RSP=00000000002099C0 RIP=000000007526730A FLG=0000000000010206
4488
6608
SYS-170101
2/5/2014 10:56
R8=0000000000000000 R9=00000000FFFFFFFF R10=0000000000310039 R11=00000000093EA270 R12=0000000000372640
4488
6608
SYS-170101
2/5/2014 10:56
R13=0000000081D6FEC0 R14=000000000020A008 R15=000000000020A030
4488
6608
SYS-170101
2/5/2014 10:56
Exception code: C0000005 ACCESS_VIOLATION
4488
6608
SYS-170101
2/5/2014 10:56
Fault address: 000000007526730A 01:000000000002630A
4488
6608
SYS-170101
2/5/2014 10:56
C:\Windows\WinSxS\amd64_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.4940_none_88df89932faf0bf6\MSVCP80.dll
4488
6608
SYS-170101
2/5/2014 10:56
==========================================================
4488
6608
SYS-170101
2/5/2014 10:56
Collect the following and send to Customer Support:
4488
6608
SYS-170101
2/5/2014 10:56
1. Log files(error_*, monitor_*, trace_*) associated with this failed job.
4488
6608
SYS-170101
2/5/2014 10:56
2. Exported ATL file of this failed job.
4488
6608
SYS-170101
2/5/2014 10:56
3. DDL statements of tables referenced in this failed job.
4488
6608
SYS-170101
2/5/2014 10:56
4. Data to populate the tables referenced in the failed job. If not possible, get the last few rows (or sample of them) when
4488
6608
SYS-170101
2/5/2014 10:56
the job failed.
4488
6608
SYS-170101
2/5/2014 10:56
5. Core dump, if any, generated from this failed job.
4488
6608
SYS-170101
2/5/2014 10:56
========================================================== -
Error : Old and new exceptions cannot be used at the same time.
HI ALL,
i build a new exception class with message class and i want to replace the
old exception that i had in the method ,what i did is delete the exception from the method
signature and add the exception class .
the problem is that when i try to activate the method i get error :
Old and new exceptions cannot be used at the same time.
CALL FUNCTION 'CALCULATE_HASH_FOR_CHAR'
EXPORTING
alg = 'MD5'
data = iv_iss
IMPORTING
hash = lv_issu
EXCEPTIONS
unknown_alg = 1
param_error = 2
internal_error = 3
OTHERS = 4.
IF sy-subrc <> 0.
RAISE EXCEPTION TYPE cx_user_mng EXPORTING
textid = cx_user_mng=>wrong_isrs.
ENDIF.
I want to use the new exception class ,
how can i avoid this error ?
Best Regards
Edited by: Joy Stpr on Jul 22, 2009 2:56 PM
Edited by: Joy Stpr on Jul 22, 2009 3:16 PMHi Joy,
Check this link.
[Old and New Exceptions Cannot be used at same time|Urgent problem, give me a hand;
Old and new exceptions cannot be used the same time, what does this mean???
Regards,
Lakshman. -
Catchable Runtime Errors list (CATCH SYSTEM-EXCEPTIONS)?
Hi All,
I was just going through CATCH SYSTEM-EXCEPTIONS syntax. Could anyone give all the possible SAP existing Exceptions or kindly let me know how I can find in the system (4.6C) ?
Thankss,
NeethHi Vijay,
Having read this post of yours, I couldn't help appreciating your modesty. And we hope to see much more active participation from your in this forum.
By the way, you now have 50 points with just 22 posts. Now, can you keep up this ratio? Just try it. And you will know better
Trying to pull your leg, anand mandalika.
========================================================
And Nameeth,
I really appreciate your coming back and rewarding the responses promptly. Please keep that up.
Regards,
Anand Mandalika. -
Hi,
I am getting below error while trying to create new maintainance plan in SQL 2008 R2, by right click on "New Maintainance plan"...could you please help on this...
I have tried to register DTS.dll but after that also error is coming...
===================================
Exception has been thrown by the target of an invocation. (mscorlib)
Program Location:
at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at Microsoft.SqlServer.Management.DatabaseMaintenance.MaintDesignerMenuHandler.GetExistingPackageNames(String serverName, String userName, SqlSecureString securePassword)
at Microsoft.SqlServer.Management.DatabaseMaintenance.MaintDesignerMenuHandler.GetNewPackageName(String serverName, String userName, SqlSecureString securePassword)
at Microsoft.SqlServer.Management.DatabaseMaintenance.MaintDesignerMenuHandler.Invoke()
===================================
No description found
Program Location:
at Microsoft.SqlServer.Dts.Runtime.Application.GetPackageInfos(String strFolder, String serverName, String serverUserName, String serverPassword)Hi,
According to the description, I understand that you receives the below error message when trying to create Maintenance Plans:
"Exception has been thrown by the target of an invocation. (mscorlib)
Have you registered MsDtsSrvrUtil.dll and SqlTaskConnections.dll as well? If no, I suggest you register “DTS.dll”, “MsDtsSrvrUtil.dll”, “SqlTaskConnections.dll” using register32.exe.
If the version of an instance of SQL Server 2008 R2 is earlier than SQL Server 2008 R2 SP2, as Shanky suggested, you may obtain the latest service pack for Microsoft SQL Server. For more information, click the following article number to view the article
in the Microsoft Knowledge Base:
http://support.microsoft.com/kb/2527041/en-us
In addition, here is a similar thread. Please refer the solution by DevB:
http://social.technet.microsoft.com/Forums/sqlserver/en-US/ca19a00a-3782-48e9-9ccd-44d4680359c0/maintanance-plan?forum=sqltools
Thanks.
Tracy Cai
TechNet Community Support -
Error :No operating system credentials were set for running the program
i am getting this error when i am trying to execute a shell script in cmc. i got the status as failed, when clicked on that failed message this is what i got
Title: delete_month
Document Type: Program
Status Failed
Destination: Unmanaged Disk destination properties have been set to the chosen Job Server's defaults.
Owner: boadmin
Server Used: cms_451.ProgramJobServer
PID: 15010
Folder Path: Temp/
Remote Instance: No
Creation Time: 12/1/2010 7:21 PM
Expiry: 12/1/2020 7:21 PM
Start Time: 12/1/2010 7:21 PM
End Time: 12/1/2010 7:21 PM
Error Message: No operating system credentials were set for running the program.
what might be the reasonwhat do u mean by pm application, i didn't get that
we r using boe xi 3.1 sp3.on sun solaris
my exact scenerio is
I wrote a shell script to delete the reports which r one month old. the reports generated by the boe r placed in unix machine(in a specific folder for example abc) and my boe server is also on unix .I imported the the shell script into boe.I assigned the path /xx/yy/abc (the path where our reports r stored) to the arguments and i gave the working directory path as the xx/yy/bobj/bobje/data/frsinput/a0_89/ ( this is the path where my shell script is present).after giving these details i am unable to delete any of the content from that folder. I am getting the failed message when i am trying to execute the object in cmc. i am pasting the shell script as well as the error message here if any body knows anything help me. do i need to set anything in cmc or what i need to do
this is the shell script to delete the files in the specified directory
#!/bin/ksh
# set -x
if [[ $# != 1 ]]; then
echo "Usage : $0 [Directory Path]"
exit 0
fi
echo "Source directory : " $1
# To display the list of files more than a month older
for v_fname in $(find "$1"/ -name "*" -mtime +30 -type f)
do
echo "$v_fname"
done
# To delete the files of more than 1 month older
find "$1"/ -name "*" -mtime +30 -type f -exec rm {} \; -
RUN-050505 -SYS-170101 - Error
Hi,
My ETL job failed due to the below reason .
I am reading 70K records and comparing against 1.5 million records using table comparison transform (pageable cache ) by one primary key against 70 columns .
But the next run went successfully without issue with same dataset.
Any clue? i dont have any transformation logics applied . i am in DI 11.7.3.2 and my repository version shows 11.7.0.
(11.7) 03-18-10 04:04:58 (E) (0760:4268) RUN-050505: |Dataflow DF_TEDI_ACCESSION|Loader ACCESSION_ACCESSION
Unknown error in transform <ACCESSION_ACCESSION>.
(11.7) 03-18-10 04:05:09 (E) (6064:5872) SYS-170101: |Session JOB_TEDI_LOAD|Workflow WF_TEDI_LOAD|Workflow WF_TEDI_ACC_PRO_SEQ|Workflow WF_TEDI_ACCESSION|Dataflow DF_TEDI_ACCESSION
System Exception <> occurred.
Call stack:
(null)
Registers:
EAX=00211B00 EBX=007BC09A ECX=00000000 EDX=00334648 ESI=00211B90
EDI=00211B90 EBP=00211B50 ESP=00211AFC EIP=7D4E2366 FLG=00000206
CS=7D610023 DS=7C35002B SS=7D61002B ES=7C35002B FS=FFFF0053 GS=7C38002B
Exception code: E06D7363
Fault address: 7D4E2366 01:00012366 C:\WINDOWS\syswow64\kernel32.dllHi,
We are getting the 170101 error as follows:
Error:
672114 1 SYS-170101 4/5/2010 8:46:31 PM System Exception <Signal 11> occurred in the context <>
Environment is as follows:
AIX 6.1
DB2 9.5
Designer: 12.2.1.3
Jobserver: 12.2.1.1
Jobengine: 12.2.1.1
Repo: 12.2.0.0000
Any ideas on how to correct this issue?
Thanks, and have a SPARKLING day, wherever you are!
Deb -
BEx Login error - Termination occurred in the ABAP program "CL_GUI_FRONTEND
Dear All,
I am having error when i am trying to login in BEx Analyser / Quary Designer 7.0
i am using the same user ID password as when i used to login to SAP BW through Logon pad.
but still i am having the error "Name or Password is incorrect. (repeat logon)"
I did try RRMX in BW, i got
Runtime Errors RAISE_EXCEPTION
Information on where terminated
Termination occurred in the ABAP program "CL_GUI_FRONTEND_SERVICES======CP" -
in "GUI_DOWNLOAD".
The main program was "RRMX_START_EXCEL ".
In the source code you have the termination point in line 89
of the (Include) program "CL_GUI_FRONTEND_SERVICES======CM012".
the program in the error dump as
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE = BIN_FILESIZE
FILENAME = FILENAME
FILETYPE = FILETYPE
APPEND = APPEND
WRITE_FIELD_SEPARATOR = WRITE_FIELD_SEPARATOR
HEADER = HEADER
TRUNC_TRAILING_BLANKS = TRUNC_TRAILING_BLANKS
WRITE_LF = WRITE_LF
COL_SELECT = COL_SELECT
COL_SELECT_MASK = COL_SELECT_MASK
DAT_MODE = DAT_MODE
CONFIRM_OVERWRITE = CONFIRM_OVERWRITE
NO_AUTH_CHECK = NO_AUTH_CHECK
CODEPAGE = CODEPAGE
IGNORE_CERR = IGNORE_CERR
REPLACEMENT = REPLACEMENT
WRITE_BOM = WRITE_BOM
TRUNC_TRAILING_BLANKS_EOL = TRUNC_TRAILING_BLANKS_EOL
WK1_N_FORMAT = WK1_N_FORMAT
WK1_N_SIZE = WK1_N_SIZE
WK1_T_FORMAT = WK1_T_FORMAT
WK1_T_SIZE = WK1_T_SIZE
SHOW_TRANSFER_STATUS = SHOW_TRANSFER_STATUS
IMPORTING
FILELENGTH = FILELENGTH
TABLES
DATA_TAB = DATA_TAB
FIELDNAMES = FIELDNAMES
EXCEPTIONS
FILE_WRITE_ERROR = 1
NO_BATCH = 2
GUI_REFUSE_FILETRANSFER = 3
INVALID_TYPE = 4
NO_AUTHORITY = 5
UNKNOWN_ERROR = 6
HEADER_NOT_ALLOWED = 7
SEPARATOR_NOT_ALLOWED = 8
FILESIZE_NOT_ALLOWED = 9
HEADER_TOO_LONG = 10
DP_ERROR_CREATE = 11
DP_ERROR_SEND = 12
DP_ERROR_WRITE = 13
UNKNOWN_DP_ERROR = 14
ACCESS_DENIED = 15
DP_OUT_OF_MEMORY = 16
DISK_FULL = 17
DP_TIMEOUT = 18
FILE_NOT_FOUND = 19
DATAPROVIDER_EXCEPTION = 20
CONTROL_FLUSH_ERROR = 21
OTHERS = 22.
IF SY-SUBRC <> 0.
case sy-subrc.
when 1.
RAISE FILE_WRITE_ERROR.
when 2.
RAISE NO_BATCH.
when 3.
RAISE GUI_REFUSE_FILETRANSFER.
when 4.
RAISE INVALID_TYPE .
when 5.
RAISE NO_AUTHORITY.
when 6.
RAISE UNKNOWN_ERROR.
when 7.
RAISE HEADER_NOT_ALLOWED.
when 8.
RAISE SEPARATOR_NOT_ALLOWED.
when 9.
RAISE FILESIZE_NOT_ALLOWED.
when 10.
RAISE HEADER_TOO_LONG.
when 11.
RAISE DP_ERROR_CREATE.
when 12.
RAISE DP_ERROR_SEND.
when 13.
RAISE DP_ERROR_WRITE.
when 14.
RAISE UNKNOWN_DP_ERROR.
>>>>when 15.
RAISE ACCESS_DENIED.
krishHello,
the same type of problem was solved today this way (it´s due to a local client problem):
Start users local SAP GUI
In the left upper corner of SAP GUI select the menue and -> options.
Delete all cache files of SAP GUI and browse the local SAP GUI download folder of the users workstation. Rename the files in the download/workdir folder for example to *_old.
Logon to SAP system again, run RRMX again -> confirm download of bex config file -> Excel sheet should open now.
Important: also the end user has to configure some excel addin options (bex) otherwise the excel sheet will be blank / empty.
BR,
Alessandro -
Job cancelled after system exception ERROR_MESSAGE in DB13
Hello All,
When i opened the t-code DB13 i saw that this job "Mark tables requiring statistics update" is cancelled.
JOB LOG:
12.02.2011 22:00:16 Job started
12.02.2011 22:00:16 Step 001 started (program RSDBAJOB, variant &0000000000085, user ID 80000415)
12.02.2011 22:00:18 Job finished
12.02.2011 22:00:18 Job started
12.02.2011 22:00:18 Step 001 started (program RSADAUP2, variant &0000000000081, user ID 80000415)
12.02.2011 22:01:26 Error when performing the action
12.02.2011 22:01:26 Job cancelled after system exception ERROR_MESSAGE
When check for the BGD Job in SM37 for this job i found the same error in the job log with the status cancelled.
Job log overview for job: DBA!PREPUPDSTAT_____@220000/6007 / 22001700
12.02.2011 22:00:18 Job started
12.02.2011 22:00:18 Step 001 started (program RSADAUP2, variant &0000000000081, user ID 80000415)
12.02.2011 22:01:26 Error when performing the action
12.02.2011 22:01:26 Job cancelled after system exception ERROR_MESSAGE
I couldn't find any logs in SM21 of that time also no dumps in ST22.
Possible reason for this error:
I have scheduled the job Check database structure (only tables) at some other time and deleted the earlier job which was scheduled during the bussiness hours which caused performance problem.
So to avoid performance issue i scheduled this job in the mid night by cancelling the old job which was scheduled during the bussiness hours.
And from the next day i could see this error in DB13.
Rest all the backups are running fine but the only job getting cancelled is for "Mark tables requiring statistics update"
Could anyone tell me what should i do to get rid of this error?
Can i schedule this "Mark tables requiring statistics update" again by deleting the old one?
Thanks.
Regards.
Mudassir ImtiazHello Adrian,
Thanks for your response.
Every alternate day we used to have performance issue at 19:00hrs.
Then when i checked what is causing this problem, i discovered that there was a backup "Check Database Structure (tables only)" scheduled at this time and it was mentioned that this backup may cause performance issue.
Then i changed "Check Database Structure (tables only)" the time of this backup to 03:00hrs.
The next day when i checked DB13 i found that one of the backups failed.
i.e. "Mark Tables Requiring Statistics Update"
Then i checked the log which i posted earlier with the error: "Job cancelled after system exception ERROR_MESSAGE"
I posted this error here and then i tried to delete the jobs scheduled i.e. "Mark Tables Requiring Statistics Update" and then re-schedule it at the same time and interval.
And then it started working fine.
So i just got curious to know the cause of the failure of that job.
Thanks.
Regards,
Mudassir.Imtiaz
P.S There is one more thing which i would like to say which is not related to the above issue, and m sorry to discuss this in this thread.
I found a few Bottlenecks in ST04 with Medium and High priority.
Medium: Selects and fetches selectivity 0.53%: 122569 selects and fetches, 413376906 rows read, 2194738 rows qualified.
High: 108771 primary key range accesses, selectivity 0.19%: 402696322 rows read, 763935 rows qualified.
There are a lot these.
I would really appreciate if you tell me what is the cause for these Bottlenecks and how to resolve.
Thanks a lot. -
An unhandled exception has been thrown in the ESB system-400 Bad request
Hi,
When i try to call a ESB Routing Service in a BPEL Flow, i am getting the error below,
An unhandled exception has been thrown in the ESB system. The exception reported is: "org.collaxa.thirdparty.apache.wsif.WSIFException: exception on JaxRpc invoke: HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Bad response: 400 Bad request
i tried to call same routing servive via SoapUI and i got the same error.
Any ideas welcome.
<messages><input><Invoke_SFA_Persist_InputVariable><part xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" name="ListOfTcAccountInterface"><ListOfTcAccountInterface xmlns:ns2="http://turkcell.com.tr/esb/Common_BO_OUTBOUND_BO_ROUTING_SERVICE" xmlns:ns1="http://oracle.com/esb/namespaces/Common_BO_OUTBOUND_BO_ROUTING_SERVICE" xmlns:inp1="http://www.turkcell.com.tr/xml/BO_Account_Interface" xmlns="http://www.turkcell.com.tr/xml/BO_Account_Interface">
<inp1:Header>
<inp1:Transaction_Id>1120000000000279727</inp1:Transaction_Id>
<inp1:System_Id>1001</inp1:System_Id>
<inp1:Process_Code>BO_FL1003_SUBSCRIBE_SERVICE_PROCESS</inp1:Process_Code>
<inp1:Transaction_Date>8/8/2008 12:47:47</inp1:Transaction_Date>
<inp1:Operation_Type>SubscribeService</inp1:Operation_Type>
</inp1:Header>
<inp1:TcAccountIntegration>
<inp1:IntegrationId>16853952</inp1:IntegrationId>
<inp1:UUID>1E01D469-4189-11dc-A07A-00144F6ABAE8</inp1:UUID>
<inp1:ListOfTcAgreementIntegration>
<inp1:TcAgreementIntegration>
<inp1:IntegrationId>16903908</inp1:IntegrationId>
<inp1:AgreementStartDate>7/28/1996 0:0:0</inp1:AgreementStartDate>
<inp1:AgreementStatus>0</inp1:AgreementStatus>
<inp1:ListOfTcAgreementAssetIntegration>
<inp1:TcAgreementAssetIntegration>
<inp1:BarringStatus/>
<inp1:AssetNumber>16903908</inp1:AssetNumber>
<inp1:AdditionalInfo/>
<inp1:AssetDescription>PostPaid GSM</inp1:AssetDescription>
<inp1:MSISDN>5322776665</inp1:MSISDN>
<inp1:Reason/>
<inp1:BSCSCustomerId>512914</inp1:BSCSCustomerId>
<inp1:BSCSCO_ID>438781</inp1:BSCSCO_ID>
<inp1:Status>0</inp1:Status>
<inp1:Type>1</inp1:Type>
<inp1:ListOfTcChildAssetIntegration>
<inp1:TcChildAssetIntegration>
<inp1:BarringStatus/>
<inp1:AssetNumber>437894069</inp1:AssetNumber>
<inp1:AdditionalInfo>9999</inp1:AdditionalInfo>
<inp1:AssetDescription>FCT</inp1:AssetDescription>
<inp1:MSISDN/>
<inp1:Reason>Service Subscription</inp1:Reason>
<inp1:BSCSCustomerId>1</inp1:BSCSCustomerId>
<inp1:BSCSCO_ID>9999</inp1:BSCSCO_ID>
<inp1:Status>0</inp1:Status>
<inp1:Type>52</inp1:Type>
</inp1:TcChildAssetIntegration>
</inp1:ListOfTcChildAssetIntegration>
</inp1:TcAgreementAssetIntegration>
</inp1:ListOfTcAgreementAssetIntegration>
</inp1:TcAgreementIntegration>
</inp1:ListOfTcAgreementIntegration>
</inp1:TcAccountIntegration>
</ListOfTcAccountInterface>
</part></Invoke_SFA_Persist_InputVariable></input><fault><remoteFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="code"><code>ESBMessageProcessingFailed</code>
</part><part name="summary"><summary>null</summary>
</part><part name="detail"><detail><detail>
<EventName xmlns:env="http://schemas.xmlsoap.org/soap/envelope/">Common.BO_OUTBOUND.BO_SFA.BO_Persist_Account_CRM_Routing_Service.Persist</EventName>
<Cause xmlns:env="http://schemas.xmlsoap.org/soap/envelope/">An unhandled exception has been thrown in the ESB system. The exception reported is: "oracle.tip.esb.server.common.exceptions.BusinessEventRetriableException: An unhandled exception has been thrown in the ESB system. The exception reported is: "org.collaxa.thirdparty.apache.wsif.WSIFException: exception on JaxRpc invoke: HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Bad response: 400 Bad request
at com.collaxa.cube.ws.wsif.providers.oc4j.jaxrpc.WSIFOperation_JaxRpc.invokeOperation(WSIFOperation_JaxRpc.java:1723)
at com.collaxa.cube.ws.wsif.providers.oc4j.jaxrpc.WSIFOperation_JaxRpc.invokeRequestResponseOperation(WSIFOperation_JaxRpc.java:1465)
at com.collaxa.cube.ws.wsif.providers.oc4j.jaxrpc.WSIFOperation_JaxRpc.executeRequestResponseOperation(WSIFOperation_JaxRpc.java:1186)
at oracle.tip.esb.server.common.wsif.WSIFInvoker.executeOperation(WSIFInvoker.java:507)
at oracle.tip.esb.server.common.wsif.WSIFInvoker.nextService(WSIFInvoker.java:430)
at oracle.tip.esb.server.common.wsif.WSIFInvoker.nextService(WSIFInvoker.java:447)
at oracle.tip.esb.server.service.impl.outadapter.OutboundAdapterService.nextService(OutboundAdapterService.java:184)
at oracle.tip.esb.server.service.impl.outadapter.OutboundAdapterService.processBusinessEvent(OutboundAdapterService.java:112)
at oracle.tip.esb.server.dispatch.InitialEventDispatcher.dispatchNonRoutingService(InitialEventDispatcher.java:158)
at oracle.tip.esb.server.dispatch.InitialEventDispatcher.dispatch(InitialEventDispatcher.java:121)
at oracle.tip.esb.server.dispatch.BusinessEvent.raise(BusinessEvent.java:1986)
at oracle.tip.esb.server.dispatch.BusinessEvent.raise(BusinessEvent.java:1465)
at oracle.tip.esb.utils.EventUtils.raiseBusinessEvent(EventUtils.java:105)
at oracle.tip.esb.server.service.EsbRouterSubscription.onBusinessEvent(EsbRouterSubscription.java:273)
at oracle.tip.esb.server.dispatch.EventDispatcher.executeSubscription(EventDispatcher.java:138)
at oracle.tip.esb.server.dispatch.InitialEventDispatcher.processSubscription(InitialEventDispatcher.java:297)
at oracle.tip.esb.server.dispatch.InitialEventDispatcher.processSubscriptions(InitialEventDispatcher.java:279)
at oracle.tip.esb.server.dispatch.EventDispatcher.dispatchRoutingService(EventDispatcher.java:94)
at oracle.tip.esb.server.dispatch.InitialEventDispatcher.dispatch(InitialEventDispatcher.java:118)
at oracle.tip.esb.server.dispatch.BusinessEvent.raise(BusinessEvent.java:1986)
at oracle.tip.esb.server.dispatch.BusinessEvent.raise(BusinessEvent.java:1465)
at oracle.tip.esb.server.service.impl.soap.EventOracleSoapProvider.raiseEvent(EventOracleSoapProvider.java:343)
at oracle.tip.esb.server.service.impl.soap.EventOracleSoapProvider.processMessage(EventOracleSoapProvider.java:190)
at oracle.j2ee.ws.server.provider.ProviderProcessor.doEndpointProcessing(ProviderProcessor.java:956)
at oracle.j2ee.ws.server.WebServiceProcessor.invokeEndpointImplementation(WebServiceProcessor.java:349)
at oracle.j2ee.ws.server.provider.ProviderProcessor.doRequestProcessing(ProviderProcessor.java:466)
at oracle.j2ee.ws.server.WebServiceProcessor.processRequest(WebServiceProcessor.java:114)
at oracle.j2ee.ws.server.WebServiceProcessor.doService(WebServiceProcessor.java:96)
at oracle.j2ee.ws.server.WebServiceServlet.doPost(WebServiceServlet.java:190)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:302)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:190)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:239)
at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:34)
at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:880)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
at oracle.tip.esb.server.common.wsif.WSIFInvoker.executeOperation(WSIFInvoker.java:539)
at oracle.tip.esb.server.common.wsif.WSIFInvoker.nextService(WSIFInvoker.java:430)
at oracle.tip.esb.server.common.wsif.WSIFInvoker.nextService(WSIFInvoker.java:447)
at oracle.tip.esb.server.service.impl.outadapter.OutboundAdapterService.nextService(OutboundAdapterService.java:184)
at oracle.tip.esb.server.service.impl.outadapter.OutboundAdapterService.processBusinessEvent(OutboundAdapterService.java:112)
at oracle.tip.esb.server.dispatch.InitialEventDispatcher.dispatchNonRoutingService(InitialEventDispatcher.java:158)
at oracle.tip.esb.server.dispatch.InitialEventDispatcher.dispatch(InitialEventDispatcher.java:121)
at oracle.tip.esb.server.dispatch.BusinessEvent.raise(BusinessEvent.java:1986)
at oracle.tip.esb.server.dispatch.BusinessEvent.raise(BusinessEvent.java:1465)
at oracle.tip.esb.utils.EventUtils.raiseBusinessEvent(EventUtils.java:105)
at oracle.tip.esb.server.service.EsbRouterSubscription.onBusinessEvent(EsbRouterSubscription.java:273)
at oracle.tip.esb.server.dispatch.EventDispatcher.executeSubscription(EventDispatcher.java:138)
at oracle.tip.esb.server.dispatch.InitialEventDispatcher.processSubscription(InitialEventDispatcher.java:297)
at oracle.tip.esb.server.dispatch.InitialEventDispatcher.processSubscriptions(InitialEventDispatcher.java:279)
at oracle.tip.esb.server.dispatch.EventDispatcher.dispatchRoutingService(EventDispatcher.java:94)
at oracle.tip.esb.server.dispatch.InitialEventDispatcher.dispatch(InitialEventDispatcher.java:118)
at oracle.tip.esb.server.dispatch.BusinessEvent.raise(BusinessEvent.java:1986)
at oracle.tip.esb.server.dispatch.BusinessEvent.raise(BusinessEvent.java:1465)
at oracle.tip.esb.server.service.impl.soap.EventOracleSoapProvider.raiseEvent(EventOracleSoapProvider.java:343)
at oracle.tip.esb.server.service.impl.soap.EventOracleSoapProvider.processMessage(EventOracleSoapProvider.java:190)
at oracle.j2ee.ws.server.provider.ProviderProcessor.doEndpointProcessing(ProviderProcessor.java:956)
at oracle.j2ee.ws.server.WebServiceProcessor.invokeEndpointImplementation(WebServiceProcessor.java:349)
at oracle.j2ee.ws.server.provider.ProviderProcessor.doRequestProcessing(ProviderProcessor.java:466)
at oracle.j2ee.ws.server.WebServiceProcessor.processRequest(WebServiceProcessor.java:114)
at oracle.j2ee.ws.server.WebServiceProcessor.doService(WebServiceProcessor.java:96)
at oracle.j2ee.ws.server.WebServiceServlet.doPost(WebServiceServlet.java:190)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:302)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:190)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:239)
at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:34)
at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:880)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
Caused by: org.collaxa.thirdparty.apache.wsif.WSIFException: exception on JaxRpc invoke: HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Bad response: 400 Bad request
at com.collaxa.cube.ws.wsif.providers.oc4j.jaxrpc.WSIFOperation_JaxRpc.invokeOperation(WSIFOperation_JaxRpc.java:1723)
at com.collaxa.cube.ws.wsif.providers.oc4j.jaxrpc.WSIFOperation_JaxRpc.invokeRequestResponseOperation(WSIFOperation_JaxRpc.java:1465)
at com.collaxa.cube.ws.wsif.providers.oc4j.jaxrpc.WSIFOperation_JaxRpc.executeRequestResponseOperation(WSIFOperation_JaxRpc.java:1186)
at oracle.tip.esb.server.common.wsif.WSIFInvoker.executeOperation(WSIFInvoker.java:507)
... 39 more
</Cause>
</detail>
</detail>
</part></remoteFault></fault></messages>Is this error just for this message, or all messages?
Is the xml valid against the payload. You will need to use a tool like XML spy to check.
Are you able to see the response coming back, if so does it conform to the response schema.
cheers
James -
Catch exceptions that occur in the constructor of a managed bean
Hello,
I would like to catch exceptions that might occur in the constructor of a managed bean and redirect to an error page. My beans need to get data from a database and if the database is not accessible, an error page is to tell the user "try again later". I don't want to write an action or actionListener that is invoked by a button klick on the previous page to make error handling easier, because an actionListener should not know about the next page and what data the next page will need.
I read all postings about this topic I could find in this forum. And there are three solutions I tried:
1) register an error-page in web.xml
Is there an example for using this in a JSF application? It did not work. I got a "Page not found" exception
2) Use a phase listener. But how can a phase listener do this? Is there an example? I don't think it can do it in the beforePhase method because this method is called before the constructor of the managed bean is called.
3) Use a custom ViewHandler. This is my renderView method which creates a "Page not found" Exception.
public void renderView(FacesContext context, UIViewRoot viewToRender) throws IOException, FacesException {
ViewHandler outer = context.getApplication().getViewHandler();
try {
super.renderView(context, viewToRender);
} catch (Exception e) {
context.getExternalContext().redirect("/error.jspx");
Several people write they've done it one or the other way. Please share your knowledge with us !!
Regards,
MareikeHallo Mareike,
Maybe I should abandon managed beans, create my own
"unmanaged" ones inside of an action listener and put
them somewhere my pages can find them.
Its a pity, because I like the concept of managed
beans.sure setter injection of JSF is fine!
well workaround could be using <h:dataTable rendered="#bean.dbAccessible" ...>
In your constructor you catch the exception and set
dbAccessible = false;
or you use error pages of webcontainer,
but the pages couldn't contain JSF components, IMHO
only plain JSP files.
BTW perhaps somebody on MyFaces' list knows the solution:
http://incubator.apache.org/myfaces/community/mailinglists.html
Regards,
Mareike-Matthias -
Seperating business exceptions and System exceptions
Hello All -
We are developing couple of mediated services using SAP PI 7.0. Below is our requirement
1.When the service producer indicates a business exception (it might be either a SOAP fault or error code coming as part of SOAP body) , it should be converted as BusinessException before throwing back to the consumer
2. When the service producer indicates a System exception (it might be either a SOAP fault or error code coming as part of SOAP body) and there is a system failure in SAP PI, it should be converted as System Exception before throwing back to the consumer
My previous experience was with IBM Process Server, where it allows to do this. Can I achieve the same with PI 7.0
Thanks in advance
RajeevHi Milan-
Thanks for the reply. We are not using bpm, since one of our expert told us that it can be a performance overhead.
Is bpm the only solution for implementing this way?
-Rajeev -
Runtime error Exception has been thrown by the target of an invocation" from Script task
I have a SSIS package with a script task, I get
the following error when i try to run it in my local system. It works fine for my collegues as well as in production. However, I am not able to run it locally, to test. I keep a debug point in the main method, but it is never reached, I get the error before
it goes to main method.
I am using VS 2010, .Net framework 4.5.
The script task does compile. I get the following messages SSIS package "..\Test.dtsx" starting. Error: 0x1 at Test: Exception has been thrown by the target of an invocation. Task failed: Test SSIS package "..\Test.dtsx" finished: Success.
The program '[2552] DtsDebugHost.exe: DTS' has exited with code 0 (0x0).The following is the code:
public void Main()
try
LogMessages("Update Bug package execution started at :: " + DateTime.Now.ToLongTimeString());
LogMessages("Loading package configuration values to local variables.");
strDBConn = Dts.Variables["User::DBConnection"] != null ? Dts.Variables["User::DBConnection"].Value.ToString() : string.Empty;
strTPCUrl = Dts.Variables["User::TPCUrl"] != null ? Dts.Variables["User::TPCUrl"].Value.ToString() : string.Empty;
TfsTeamProjectCollection objTPC = new TfsTeamProjectCollection(new Uri(strTPCUrl));
WorkItemStore objWIS = new WorkItemStore(objTPC);
WorkItemCollection objWIC = objWIS.Query("SELECT...");
foreach (WorkItem wi in objWIC)
catch(Exception ex)
When I commented the code from TfsTeamProjectCollection objTPC = new TfsTeamProjectCollection(new Uri(strTPCUrl)); The script executes successfully. However, if i keep TfsTeamProjectCollection objTPC = new TfsTeamProjectCollection(new Uri(strTPCUrl));
and comment the rest, i get the exception.
I do have access to the URL -
Soundtrack Pro 9.1.6 - Uncaught System Exception (10.7.2)
Soundtrack Pro is no longer loading past the startup screen for me, and when I launch it via the raw application in its MacOS folder, terminal gives me this:
Last login: Wed Jan 11 19:14:39 on ttys000
d173-238-1-90:~ josh$ /Applications/Soundtrack\ Pro.app/Contents/MacOS/Soundtrack\ Pro ; exit;
DVFreeThread - CFMachPortCreateWithPort hack = 0x16f4a00, fPowerNotifyPort= 0x16e8e50
DVFreeThread - CFMachPortCreateWithPort hack = 0x1260db0, fPowerNotifyPort= 0x12dec80
DVFreeThread - CFMachPortCreateWithPort hack = 0x12df870, fPowerNotifyPort= 0x1258d50
DVFreeThread - CFMachPortCreateWithPort hack = 0x1261430, fPowerNotifyPort= 0x12dec80
DVFreeThread - CFMachPortCreateWithPort hack = 0x1260db0, fPowerNotifyPort= 0x1258d50
DVFreeThread - CFMachPortCreateWithPort hack = 0x1261430, fPowerNotifyPort= 0x12dec80
DVFreeThread - CFMachPortCreateWithPort hack = 0x41cc8f0, fPowerNotifyPort= 0x41ccc30
DVFreeThread - CFMachPortCreateWithPort hack = 0x41ccc10, fPowerNotifyPort= 0x41ccbf0
DVFreeThread - CFMachPortCreateWithPort hack = 0x16f4a00, fPowerNotifyPort= 0x16f3190
DVFreeThread - CFMachPortCreateWithPort hack = 0x164b760, fPowerNotifyPort= 0x16f4a00
2012-01-11 19:22:21.663 Soundtrack Pro[12860:2903] NSExceptionHandler has recorded the following exception:
NSUncaughtSystemExceptionException -- Uncaught system exception: signal 10
Stack trace: 0xd922fd 0x909f059b 0xffffffff 0x97502bd3 0x97501b8a 0x96a43b2d 0x96a4bc00 0x97502ae4 0x97503fed 0x974d780b 0x97502ae4 0x97501b8a 0x96a42862 0x97502ae4 0x97501b8a 0x96a41ec9 0x96a41587 0x96a41233 0x96a41167 0x149f18 0x2b43b7 0x36118a 0x96e31eef 0x96e3217d 0x2bf863 0x974d5f49 0x92b07ff3 0x92ad2d78 0x974c1136 0x96a3dd05 0x96a3d9f8 0x96a3c518 0x96a3c22e 0x92b20548 0x974fb21a 0x974f9fcd 0x974f9da1 0x98e74045 0x98e5db67 0x98e5da54 0x98b2afea 0x96a392af 0x96a388ab 0x96a34c22 0xa3c446 0x2bc8d3 0x36c6 0x1
2012-01-11 19:22:21.664 Soundtrack Pro[12860:2903] Uncaught system exception: signal 10
2012-01-11 19:22:21.725 Soundtrack Pro[12860:2903] .scriptSuite warning for attribute 'script_xml' of class 'MultitrackDocument' in suite 'SoundtrackSuite': 'NSData' is not a valid type name.
I thought it might have something to do with it trying to open the last project, so I tried reopening another project, and that didn't work. I've also trashed the preference file, which also didn't work.
I've already reinstalled twice, and I'm not anxious to just try it again as I've already had to fix Logic Pro in Lion by replacing ProKit and BrowserKit frameworks with earlier versions. Logic works now, and it's just Soundtrack Pro, Compressor and DVD Studio Pro that don't work (not too concerned about Compressor & DVD studio though).
There are an unfortunate number of issues with these pro apps and Lion, and I unfortunately don't have the option of going back to Snow Leopard, but I would if I had the time.Hi
If all you are trying to do is "bounce" the recorded audio from the 8 Track into Logic, you should not need the MMC devices (The MMC object allows you to 'remotely' control recording on the 8 track from Logic)
How are you routing the audio from the 8 track into Logic?
If you have Logic and the 8 track running in-sync, all you should need to do is arm a standard audio track in Logic (set to the correct audio inputs) and hit Rec.
CCT -
Error in source system in BI 7.0...
Hi,
When creating a source system in Bi 7.0, when i am going to t code- rsa1- client-right click and then check,it's giving an error like:
EDI- partner profile not available and then detail for this error is-- a partner profile cannot be found with this key- /DBICLNT300/LS
THIS INVLOVES THE KEY FIELD OF THE TABLE EDPP1-
PARNUM-PARTNER NUMBER
PARTYP-PARTNER TYPE
Please help me in solving this. Thank You.Hello,
Try a restore on your source system (rightclick -> restore) This way idoc ports and agreements are regenerated between BW and R/3. If this does not solve the problem ceck this:
Hi,
Did you do a system copy for BW ?
Try a restore (rightclick on your source system) in most cases this will solve the problem.
If not check the notes below:
184322 Procedure after DB copy of BW source systems
886102 System Landscape Copy for SAP BW 2.X, 3.X and NW2004s BI
325470 Activities after client copy in BW source systems
325525 Copying and renaming systems in a BW environment
184754 Procedure after BW database copy
184447 Building a BW-system landscape
184971 Notes on BW source system connections
140276 Error in source system assignment
524554 Storing destinations in the BW environment
538052 Maintenance of Myself destination in BW
Regards, Patrick Rieken
Maybe you are looking for
-
Doubt in creation of a new object
Hi All, I have one doubt in creation of a new object.If a new object is to be created and it is not a subtype of any existing object, then what should we enter in the Program field for creating the object? I hope I am clear with my quest
-
Imminent Hard Drive Failure? Satellite C655D-S5130
Recently performed a system recovery after boot failure on Satellite C655D-S5130. Recovery went fine, but now we're getting a windows error message after startup saying that we should run file backup because the hard drive reported errors and warning
-
Web dynpro URL not working in user's UWL
Hi, I am not sure if this is the right place for this question. I have created a web dynpro application and copied the URL and we put this URL in the UWL of a user using workflow, now the issue is when a user click on that URL on the portal side it's
-
I can't install Itunes 11.0.4. please help!
The automatic updater threw an error when I tried to update iTunes and Quick Time today. It said: "The feature you are trying to use is on a network resource that is unavailable." about both a "iTunes 64.msi" file and a "Quick Time.msi" file. Solutio
-
SAP NetWeaver 7.01 ABAP Trial Version INSTALLATION PROBLEM !!!
Installation stops always when it's got 18%. The load_datasave file is getting biger and biger all the time... Log file: Tue Nov 04 13:39:50 CET 2008 MaxDB: Start SoftwareCheck Tue Nov 04 13:39:50 CET 2008 MaxDB: IndepProgPath: Tue Nov 04 13:39:50 CE