Error syslinux when I start Arch

I have a problem after I installed Windows 8... Yes, bye bye syslinux... I'am reading many webs for learn how I can do solve this problem.
The information for this problem is very poor and I'm doing differents methodes for resolve it.
Someone know How I can resolve it?
Thanks.
Last edited by Howarto (2013-02-23 12:38:38)

DSpider wrote:
So basically you reinstalled Windows and now it has taken over the MBR. No problem. Just pop in an Arch Linux LiveCD/USB, chroot and follow the instructions from the Beginners' Guide. Unless you use UEFI. In that case, see: https://wiki.archlinux.org/index.php/Be … therboards
Note: Syslinux does not yet support UEFI.
I was doing this, but now I know that the problem will solve... Thanks!

Similar Messages

TS1389 I have the error 42111 when I start iTunes.

Hello, I have the error 42111 when I start iTunes. I did not download a movie, I just installed the newest version of iTunes. I reinstalled but that didin't help. What can I do? I have Windows 8.

Removing the SC Info folder as per the "Error 3001," "-42110," or "5103" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document seems to help most folks reporting the iTunes launch 42110s:
iTunes: Advanced iTunes Store troubleshooting

I am receiving an error message when I start my laptop HP G62 Internal battery error 601? What ?

I am receiving an error message when I start my laptop HP G62 Internal battery error 601? What does it means please provide me solution ASAP

Israr,
Then error indicates that the primary battery (the one you can remove and replace) has a hardware failure. You should run Battery Check in HP Support Assistant.
Wes
I am an HP employee.

HT1926 I'm attempting to reinstall ITunes because of a runtime error (R6034) when I start it. At end of install it says 'Apple Mobile Device' failed to start. I verified that I have admin privileges. Can anyone help?

I'm attempting to reinstall ITunes because of a runtime error (R6034) when I start it. At end of install it says 'Apple Mobile Device' failed to start. I verified that I have admin privileges. Can anyone help?

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

Getting error message when Firefox starts

I am getting the following message when I start Firefox ever since I upgraded to the newest version (4.0.1). This is what it says:
what happened: TypeError: Components.classes[@mozilla.org/extensions/manager;1’] is undefined
Firefox doesn’t load until I click the OK button in the message. What is causing this?

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
* [[Troubleshooting extensions and themes]]
In Firefox 4 you can use one of these to start in <u>[[Safe mode]]</u>:
* Help > Restart with Add-ons Disabled
* Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows)

Error message when i start iTunes 7...HELP PLEASE!!

whenever i start up itunes 7, i get an error message, and the details read:
This error report includes: information regarding the condition of iTunes when the problem occurred; the operating system version and computer hardware in use; your Digital Product ID, which could be used to indentify your license; and the Internet Protocol (IP) address of your computer.
PLEASE HELP! I JUST GOT MY iPOD TODAY AND I FEEL LIKE I'VE JUST WASTED $250!!!
Windows XP

OK first we will see if the issue is on the PC side and not the iPod. Uninstall iTunes,Quicktime, and the updater from control panel>add/remove. Uninstalling iTunes will not delete any playlist, songs, ect ect.
Then run chkdsk in windows to correct any lost or damaged system files. To do this goto "My Computer" rightclick the harddrive (Usually C Drive) Select properties>Tools tab and under "Error checking" hit check now. In the following window that appears, put a check beside "Auto fix file system errors" hit OK then hit yes in the next window. Reboot and after the check is done it will boot back into windows
Now disable any antivirus/security/norton/mcafee products then download/install the latest iTUnes here http://www.apple.com/itunes/download/ and iPOd updater here http://www.apple.com/ipod/download/
If this does not work check the system for malware (General term for adware and spyware) with Ewido, this program tends to catch alot of malware that messes with iTUne and iPod software http://www.ewido.net/en/download/

I get an error message when I start up itunes. It says the registry settings for burning are missing and to reinstall itunes. Well I have done that and it doesn't work! Help

When I run diagnostics I get error 43 telling me to repair install itunes and that doesn't work either.

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes

An error message when iTunes starts up.

Lately when my iTunes start I get the following error
message.
iTunes Setup Assistant
Warning!
The registry settings used by the iTunes drivers for importing and
burning CDs and DVDs are missing. This can happen as a result of
installing other CD burning software. Please reinstall iTunes.
I tried to reinstall, but I still get the same error message. It doesn't matter much, I'm not using the iTunes
to burn CDs, just trying to get the message to stop
popping up everytime, keeps the iTunes from starting
automatically when I connect the iPod. Thanks.
me.

What other burning software do you use on your PC? There is a reason why this happens. When an application (such as Roxio, Nero, iTunes, etc.) is installing a driver file (as a .SYS) or replacing a working driver file that is referenced within your registry. For some people, the replaced driver is still referenced by either an UpperFilterCheck or a LowerFilterCheck, and the device manager is actually seeking out that file that, well... no longer exists. Or, when you try and uninstall the application (iTunes is the frequent transgressor) everything is removed, including the related driver files, but the registry isn't altered... so the device manager continues to try and locate that driver file... which no longer exists...
First, I would tell you to go to your computer manufacturer's website and download all new driver's for your optical drives. Run CD Diagnostics in iTunes and post them here if you still have problems. Here is an Apple Article that discusses this issue:
http://docs.info.apple.com/article.html?artnum=302976
There are other work arounds as well if you want to know that. Post back if you still have problems.
Rachyl

Guest Grub Error 18 when VM starts only on Server 2

Hi all,
I have a Linux RedHat Virtual Appliance.
The VM perfectly works on the VMware player for windows, and also on an ESXi Infrastructure.
When I try to play it on VMware Server 2 (linux or windows) at boot time grub signals ERROR 18, concerning the cylinder size.
On other host I tried it, the VM starts without any issue by GRUB.
Any idea??
Is there some BIOS setting coming from the HW version of the VMware Server 2 machines??
Thanks in Advance

Hi all,
I have a Linux RedHat Virtual Appliance.
The VM perfectly works on the VMware player for windows, and also on an ESXi Infrastructure.
When I try to play it on VMware Server 2 (linux or windows) at boot time grub signals ERROR 18, concerning the cylinder size.
On other host I tried it, the VM starts without any issue by GRUB.
Any idea??
Is there some BIOS setting coming from the HW version of the VMware Server 2 machines??
Thanks in Advance

Error messages when installing/starting oc4j (11.1.1.0.0) Technical Preview

Hello,
Could someone please assist me with the following error messages?
08/08/12 10:25:30 SEVERE: AbstractInfo.getAnnotation oracle.webservices.annotations.async.AsyncWebService cannot be found in the given classpath.
08/08/12 10:25:30 SEVERE: AbstractInfo.getAnnotation oracle.webservices.annotations.async.AsyncWebService cannot be found in the given classpath.
08/08/12 10:25:32 Don't know how to map non-serializable type: interface javax.management.j2ee.statistics.Stats to Open MBean Type.
08/08/12 10:25:34 WARNING: J2EE JNDI-00002
08/08/12 10:25:34 WARNING: No javax.jms.ConnectionFactory found at null
08/08/12 10:25:38 Oracle Containers for J2EE 11g (11.1.1.0.0) initialized.
Obviously oc4j is installing, but these error messages are certainly a problem (for example, I can't successfully deploy applications).
When I used the previous version of oc4j none of these errors surfaced. I also have tried installing this new version in a new, clean directory, and still get the same error messages.
Please help,
John

Thank you for your quick response.
I hope that you are right, that these errors don't cause any other problems down the line, but I still have a problem trying to deploy applications.
For example, I tried to deploy mapviewer, using the following syntax --
java -jar admin_client.jar deployer:oc4j:localhost fmwadmin <admin_pwd>
-deploy
-file <path-to-ear-file>
-deploymentName <name>
-bindAllWebApps
-- and recieved the following errors, which I didn't get before when I was using the previous version of oc4j (Oracle Containers for J2EE 10g [10.1.3.1]):
08/08/13 08:49:30 WARNING: web: Servlet error
java.lang.ClassCastException: com.sun.faces.application.ApplicationAssociate
at com.sun.faces.application.ApplicationAssociate.getInstance(ApplicationAssociate.java:180)
at com.sun.faces.application.WebappLifecycleListener.getAssociate(WebappLifecycleListener.java:289)
at com.sun.faces.application.WebappLifecycleListener.handleAttributeEvent(WebappLifecycleListener.java:225)
at com.sun.faces.application.WebappLifecycleListener.requestDestroyed(WebappLifecycleListener.java:78)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:743)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:334)
at com.evermind.server.http.HttpRequestHandler.doDispatchRequest(HttpRequestHandler.java:942)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:843)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:658)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:626)
at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:417)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:189)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:163)
at oracle.oc4j.network.ServerSocketReadHandler$ClientRunnable.run(ServerSocketReadHandler.java:275)
at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:237)
at oracle.oc4j.network.ServerSocketAcceptHandler.access$800(ServerSocketAcceptHandler.java:29)
at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:877)
at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:650)
at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:675)
at java.lang.Thread.run(Thread.java:595)
Do you have any idea why I may be getting these error messages?
Thank you for your time and assistance!
John

Windows keeps giving me "itunes has stopped working" error message when I start itunes? How can i fix this?

After downloading the newest version, 10.6.1, whenever I open itunes I almost immediately get a "itunes has stopped working" error messsage, in which the only option is to hit the "close the program" button. Simply closing the error message closes the program as well. I am operated under windows XP with the latest updates (or so the updater tells me). It seems like its getting stuck trying to send me a new user agreement because dont you have to agree to one for every new update? It just can't seem to get past that point. I tried opening it up in safe mode but that didnt work either. Any help would be greatly appeciated.

Looks like itunes was still trying to communicate with my iphone and got confused when it couldnt find it. Found this in another post and it worked great.
Solution:
Make sure you are not connected to the internet and then open itunes. Sync your phone and then enable the internet again. Then stay connected to the internet and close your itunes and reopen it. Bam problem solved.
By WaKaDo

Get error message when I start Premiere Pro.

Whenever I start Premiere Pro I get the error message: Adobe Premiere could not find any capable vidoe play modules. How do I fix this?

•What is your exact brand/model graphics adapter (ATI or nVidia or ???)
•What is your exact graphics adapter driver version?
•Have you gone to the vendor web site to check for a newer driver?
•For Windows, do NOT rely on Windows Update to have current driver information
•-you need to go direct to the vendor web site and check updates for yourself
•ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
•nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us
Do you have dual graphics adapters?
Go to the Windows Control Panel and select Hardware and Sound and then select Device Manager... In Device manager you click the + sign to the left of Display Adapters... and see if 2 are listed
IF YES, read below
-http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modules.html
-http://forums.adobe.com/thread/1001579
-Use BIOS http://forums.adobe.com/thread/1019004?tstart=0
-link to why http://forums.adobe.com/message/4685328
-http://www.anandtech.com/show/4839/mobile-gpu-faceoff-amd-dynamic-switchable-graphics-vs-n vidia-optimus-technology/2

Error message when Elements starts installation process and halts

Mac OS 10.7.2 on a 13" macBook Air 1.8 ghz intel Core i7 4 GB Ram 20GB unused SSD space, After clicking "trial" and entering my Admin pasword, the install starts but then halts with the following messages:
Exit Code: 24
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 18 error(s), 0 warning(s)
ERROR: DW001: Set payload cancelled status
ERROR: DW049: Payload {007A2A28-D6A8-4D91-9A2B-568FF8052215} has an action "install" but no resultState
ERROR: DW049: Payload {0AA9D11A-227D-45AB-A5D5-6F5F6E81D5E3} has an action "install" but no resultState
ERROR: DW049: Payload {0AF29C46-6E82-4402-9019-8A6BB0F981D4} has an action "install" but no resultState
ERROR: DW049: Payload {28B74F2E-2E70-4B44-A581-0C19F62A5D6E} has an action "install" but no resultState
ERROR: DW049: Payload {52411D2C-81DD-442F-81C7-D867F6D73491} has an action "install" but no resultState
ERROR: DW049: Payload {60CB5C6D-5B99-45D3-BAB5-E7728182101E} has an action "install" but no resultState
ERROR: DW049: Payload {6A2E619B-E4AC-433B-A648-D458CE543A96} has an action "install" but no resultState
ERROR: DW049: Payload {6F3A624B-1B72-4081-96E8-23261F389C5C} has an action "install" but no resultState
ERROR: DW049: Payload {A44863BF-8DB8-4D22-88DB-5A02BE319840} has an action "install" but no resultState
ERROR: DW049: Payload {BC5880C9-E055-4E57-826A-749E79C498C2} has an action "install" but no resultState
ERROR: DW049: Payload {BD0D6363-E961-410F-8BF4-ECD8795F3923} has an action "install" but no resultState
ERROR: DW049: Payload {E6FE3234-EA6D-4F21-AF83-E7279A985CD1} has an action "install" but no resultState
ERROR: DW049: Payload {EB3A47AA-B4E2-4857-A69C-92A6E097F24C} has an action "install" but no resultState
ERROR: DW049: Payload {FEA75AFB-4905-43BB-B1D5-5B44D681BFE7} has an action "install" but no resultState
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Camera Profiles Installer: User cancelled installation
ERROR: DW001: User cancelled the operation
Tried twice to download, Same message both times. What do I need to do? Have the trial started on an iMac. Leaving for a vacation Fri AM. Wanted to use this editor with the Air to learn the program.
Paul

Check out the discussion on this thread for a solution: http://forums.adobe.com/message/4076788

Error 1069 when I start my local WebAS

Hi,
to start my local WebAs I have to start the services SAPPDE_00 and SAPPDE_01. This was always working fine, but now I get the Error 1069! It says that my password is expired. My license is valid until January.
Can anybody help me, please?
Thank you
Julia

Hi,
Did you check notes like 13141, 544533 and 82751?
Eddy

Error: 5 when Illustrator starts

After installing on my iMac 10.9 version of Mac OS X and reinstall when trying to open Illustrator CS6, the application displays the error: 5, indicating that I have to uninstall and reinstall. Once the uninstall and install again, the application is still showing the error. I would appreciate your help. Thank you.

Hi Fer Ferris,
Please try to update latest Java Update and restart the machine.
https://java.com/en/download/index.jsp
Hope this helps.
Please let me know in case it doen't worked for you.
Regards,
Sumit Singh

Error syslinux when I start Arch

Similar Messages

Maybe you are looking for