Error "SYSTEM FAILURE: - NULL" while configuring Planning 9.3

Hello,
I have installed Hyperion System 9 Planning 9.3.0.1 on Windows 2003 Server. SQL Server 2003 is the database. I have installed Shared Services 9.3 and Hyperion Administrative Services as well. System 9 BPM Architect has also been installed.
My problem is, when I try to configure the " Data Source Configuration" under Planning. I am able to get to the page " Select the options for managing the Datasource"
Create Datasource
Next
Datasource Name : Testdsn
Datasource Description: Testing the DSN
NextAs when I do the above procedure and click Next, I get Error " SYSTEM FAILURE: - NULL".
Please any help in this regard is appreciated.
Thanks in advance. :)

Hi,
Are you sure you re using SQL Server 2003? I thought only 2000 and 2005 were supported.
Whats in the Configtool.log under Hyperion\Common\Config\Log?
Seb

Similar Messages

Error"SYSTEM Failure" while testing the RFC in SE37 : RFC to JDBC Scenario

Hi All,
I am doing RFC to JDBC scenario. When I am testing the RFC in SE37 using the RFC destination created in SM59, I get an error "SYSTEM FAILURE".
Please suggest.
Thanks,
Shyam
Edited by: Shyam Sreepada on Dec 18, 2007 5:46 PM

Hi,
You must run RFC with RFC destination in background mode, I suggest to read following post in order to understand it better.
Syntax would be:
CALL FUNCTION func IN BACKGROUND TASK
[DESTINATION <your RFC destination>]
parameter list
http://help.sap.com/saphelp_nw04/helpdata/en/8f/53b67ad30be445b0ccc968d69bc6ff/frameset.htm
If you read it you will find that you can't test it directly from SE37, for this either you need to create dummy ABAP program or another RFC where you will call this RFC with background syntax.
Regards,
Gourav
Reward points if it helps you
Edited by: Gourav Khare on Dec 18, 2007 6:07 PM

Supplementary Service Error : System Failure

I am using Blackberry 8520 Curve mobile with Reliance GSM prepaid network in India.
I am unable to access the internet and facing problem, while checking balance inquiry that "Supplementary Service Error : System Failure".
Further, I would also like to register my mobile.
Looking forward for the tips to solve the problem.

Hello !
Firstly, SUPPLEMENTARY SERVICE ERROR, is not an error to be worried upon.
It is highlighted mostly after every call which You make it from your BlackBerry Smartphone.
Secondly for activating BIS, you need to contact your service provider.
Once activated, you'll get to see "EDGE" symbol on your homescreen, near network strength signals.
Hope this resolves your Problem!
If your problem has been resolved then would request you to Click on "Like" and accept as "Solution" so that other Advisors doesnt invest their time on this Message anymore.
Thanks.

Supplementary Serverice Error: System Failure

Hi,
I am using the BB 8520 Curve on Vodacom with BIS activated. Everytime i try send a Please Call Me i get an error saying "Supplementary Serverice Error: System Failure". I searched on google and i cant find any solutions people say they get it from smsing, phoning etc but i can Phone and SMS, just cant send please call me's!
!?!!?!? Help plz

Hi and Welcome to the Forums!
Could you perhaps provide a bit more description of what a "please call me" is? Is that a voice message? A text message of some kind? I am not at all familiar with that term you are using.
Thanks!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Supplementary Error : System Failure

Guys please help >>>
I am getting this message : " Supplementary Error : System Failure " , they swapped my device is became less frequent ;however, still annoying ....
What do you think are the causes or the solution ?
MY DEVICE : bb curve 9320 7.1 Latest Bundle
BTW I WIPED MANY TIMES !

Hello mmok94
Welcome to BlackBerry Support Forums
Can you contact your Carrier and get your SIM replaced ! I cannot assure but in most cases replacing the SIM card has solved this error with most user .
You can try that .
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

Product Instance Registration Error: "System Failure: Error while retrieving xml file from database"

Hi S9 installation Gurus,
Please try to resolve this long awaited issue with Planning installation as this is purely configuration related issue.
Detail of Problem:-
After Susessful configuration of
1) Foundation Services (Hyperion Shared Services)
2) Essbase administration services
3) Essbase Server
4) Hyperion reporting and analysis
5) Planning -----> Product options, Register with shared services, configure database, deploy to application server (Appache)
Error Point: when i tick ckeck box in front of Product instance registration
click next
create instance
click next
instance name-Plan1
Web tier host name: my machine name (neeraj-pc, as i installed locally all component of hyperion)
server port: 8300 (system suggesting)
tick on active instance
click next
Error Pop Up "System Failure: Error while retrieving xml file from database"
Details of PlanningSystemDB (file :- \Hyperion\common\config\PlanningSystemDB.properties)
SYSTEM_DB_DRIVER=hyperion.jdbc.sqlserver.SQLServerDriver
SYSTEM_DB_URL=jdbc:hyperion:sqlserver://neeraj-PC:1433
SYSTEM_DB_USER=puser
SYSTEM_DB_PASSWORD=GGAKFJ
SYSTEM_DB_CATALOG=p1db
SYSTEM_DB_TYPE=SQL
INSTANCE=
Note: puser (SQL Authenticated user)
Thanks
Kumar
Edited by: user10385300 on Dec 4, 2008 5:44 AM

This has been resolved at :- Product Instance Registration Error Message: "System Failure: Error while retrieving xml file from database"
Cheers
John
http://john-goodwin.blogspot.com/

Error RCIRAS0546, failure occured while the report was being processed

Hello all,
We use Crystal Reports 2008 V1 server on Linux. With 2 reports now we get the error when viewing the report from the Central Management Console (CMC)
"Your request could not be completed because a failure occurred while the report was being processed. Please contact your system administrator. [RCIRAS0546]"
In de /var/log/messages, I get messages like these:
Sep 28 17:37:30 vsrv01 boe_crprocd[25630]: A failure occurred while the server was processing report file 2:11154 (RCIRAS0568)
Sep 28 17:37:40 vsrv01 boe_crprocd[25630]: A failure occurred while the server was processing report '10. LEN Rapportage per scenario (kapitaallasten, investeringen, algemene gegevens) (V1)' (id=11154) for user 12 (RCIRAS0567)
I tried several parameters on the CrystalReportsProcessingServer, like increasing/decreasing the Maximum Current Jobs and Number of Prestarted Children. None of these make a difference. Als the error occurred when viewing the report as Administrator.
The reports has a dynamic parameter, wtih content coming from the database (drop-down list). When selecting one value the report is viewing fine. With a selection of more values the error occurred. In Crystal Reports 2008 there is no problem.
I restarted the CRProcessingServer with -trace. In the trace I see the following lines:
It seems that several subprocesses start for retrieving data based on the parameter values.
After the crash of the first child, the above mentioned error occurs.
2010/09/28 15:37:23.075|==| | |25630|1474829200| |||||||||||||||(ProcWorkerManager.cpp:82) PageChildDesc constructor (id=3)
2010/09/28 15:37:23.075|==| | |25630|1474829200| |||||||||||||||(ProcWorkerManager.cpp:5489) doCreateChild() created a new child 3
2010/09/28 15:37:30.011|==| | |25630|1474562960| |||||||||||||||(ProcWorkerManager.cpp:6814) cleanupChildren() starting
2010/09/28 15:37:30.011|==| | |25630|1474562960| |||||||||||||||[ProcWorkerManager.cpp : 6854] RAS-CORE-METRICS (before cleanup) number of child processes = 3
2010/09/28 15:37:30.011|==| | |25630|1474562960| |||||||||||||||(ProcWorkerManager.cpp:6979) child id=1 crashed
2010/09/28 15:37:30.011|==| | |25630|1474562960| |||||||||||||||(ProcWorkerManager.cpp:6994) cleanupChildren() removing child id=1
2010/09/28 15:37:30.012|==| | |25630|1474562960| |||||||||||||||(ProcWorkerManager.cpp:101) PageChildDesc destructor (id=1)
2010/09/28 15:37:30.012|==| | |25630|1474562960| |||||||||||||||(ProcWorkerManager.cpp:7028) cleanupChildren() marking as stopped: worker id=1 in child id=1
2010/09/28 15:37:30.012|==| | |25630|1474562960| |||||||||||||||(ProcWorker.cpp:2703) stopping worker id=1
2010/09/28 15:37:30.012|==| | |25630|1474562960| |||||||||||||||(ProcWorkerManager.cpp:7168) cleanupChildren() ending
Does someone know this problem and what to do about this?
With kind regards,
Pim van Stam
SvSnet

We got this error message on a report that had 5 subreports, 3 of which were based on stored procedures. The report was running fine in our Dev environment and in the CR developer, but not when we published it to another environment. The problem was caused because the stored procedures had been changed in Dev (so that they ran correctly) but these changes had not been released to the other environment. Once the scripts were run to update the stored procedures the report ran successfully. So it apepars that the problem was because the stored procedure/s the subreports were using were failing, but we only got the RCIRAS0546 error message.

Sender RFC adapter Error- request was null while trying to extract it.

Hi All,
I have a scenario running in Production(PI 7.0 system) where SAP ECC sends RFC request through sender RFC adapter. The scenario was working fine but now I am getting the below error in default trace and I couldn't see any error in communication channel monitoring.
java.lang.Exception: RfcServer[BAS_ECC_RFC_Snd]1[AFSenderD] request was <null> while trying to extract it.
I have gone through the below thread and performed a full cache refresh but it didn't help :
[NULL]
I have gone through SAP note:730870 and I couldn't get any help on this error. Can you please suggest your ideas to solve this issue.
Thanks & Regards,
Laawanya

Hi Lawanya,
Check you RFC and input data , whether the RFC call is able to get the data from ECC or not.
you can test the same RFC in ECC with input data and you can check whether the RFC in ECC is return the value or not.
I gues in your case the RFC in ECC is not return any data to PI.

Error while configuration of CRM Planning Layout in BW

Dear Experts,
While configuring Planning Layout in BW system for CRM. Received following error messages
1. Planning Services Error
2. RFC error: Independent time characterstic in level. Layout cannot be executed.
The Planning Layout has been designed with reference to document " “ How to Build Planning Layouts and Integrate it With CRM System.pdf”.
Please find the following link for the reference document.
How to Build Planning Layouts and Integrate it With CRM System
Could some one please help us on this.
Thanks,
Khader

Dear Experts,
While configuring Planning Layout in BW system for CRM. Received following error messages
1. Planning Services Error
2. RFC error: Independent time characterstic in level. Layout cannot be executed.
The Planning Layout has been designed with reference to document " “ How to Build Planning Layouts and Integrate it With CRM System.pdf”.
Please find the following link for the reference document.
How to Build Planning Layouts and Integrate it With CRM System
Could some one please help us on this.
Thanks,
Khader

System Failure : FRONTEND_ ERROR raised While Calling RFC from R/3 to CRM

Hi Experts,
I'm Getting the Error System Failure Error "Error has occurred making remote call to method DISPLAY in system CRP_110".
RFC function Module : CRM_FM_ACL_DISPLAY_FPO.
I have Check the RFC Destination and other parameters passed is same.
Please help me to resolve this issue in production and it's w

Hi Nilesh,
Well if you have already checked whether the FM is available in CRM system, then check SM58 & SM21 for logs of the RFC call. That should have the details for failure.
Also please check if the FM is remote enabled. I dont have access to CRM system, hence cant verify.
Thanks,
Best regards,
Prashant

Macro Error while executing planning functions or saving data

Dear All,
I am getting following error in BEx Analyzer while executing planning function or pressing a save button.
Note: Excel is 2007 version.
Cannot run the macro "XXXXXX.xlsx". The macro may not be available in this workbook or all macros may be disabled.
I changed the settings in Macro Settings (Office Button -> Excel Options -> Trust Center -> Trust Center Settings-> Macro Settings) eventhough it is showing that above message.
selected ->
Enalble all macros
Trust access to VBA project object model.
If anybody faced this issue kindly reply to this.
Best Regards,
SG

Hello everybody,
i am facing exactlythe same issue! I am currently running GUI Patch Level 14 and BI Add on Patch Level 10.
I have also adjusted all necessary settings in Excel Options like Activate all Macros and Trust VBA Coding.
Does anybody have another Solution.
As mentioned before Gui Patch 13 and BI Add On Patch 10 obviously arent the solutiuon.
Best regards
Janos

"SYSTEM FAILURE" during JCo call.java.lang.reflect.UndeclaredThrowableExcep

Hi All
I have developed Java mapping program where I am calling three BAPI in sequence and trying to map all three bapi data to single Target XML file or Multiple target xml files depends on the in coming data.
Now I want these files name should be genereted dynamically .So I have used below Dynamic Configuration code in my java mapping program.********************************************************************************************************************************************************************
try
     String currDate = new String();
     String currTime= new String();
     DateFormat dFormat=new SimpleDateFormat("yyyyMMdd");
     DateFormat tFormat = new SimpleDateFormat("HHmmss");
     java.util.Date date = new Date();
     TimeZone cetTimeZone = TimeZone.getTimeZone("CET");
     tFormat.setTimeZone(cetTimeZone);
     currDate = dFormat.format(date);
     currTime= tFormat.format(date);
     String pubDate=currDate + currTime;
     String ext=".xml";
     String event="-1_1-";
     trace.addInfo("******** Before Dynamic Configuration ***************" );
     DynamicConfiguration conf =(DynamicConfiguration)container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
                                        DynamicConfigurationKey key = DynamicConfigurationKey.create( "http://sap.com/xi/XI/System/File","FileName" );
     trace.addInfo("******** After Dynamic Configuration ***************" );
     String tempFileName="NL09-"eventponum+ "-" pubDateext;
     trace.addInfo("The name of the file is : " + tempFileName);
     conf.put(key, "tempFileName");
            catch (Exception e)
                 trace.addWarning("Error While creating File Name"+e.getMessage());
                 throw new Exception("Error While creating File Name",e);
Now the problem is when I am using above code I am getting following error
"SYSTEM FAILURE" during JCo call.
java.lang.reflect.UndeclaredThrowableException
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="MAPPING">JCO_SYSTEM_FAILURE</SAP:Code>
<SAP:P1>java.lang.reflect.UndeclaredThrowableException</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>"SYSTEM FAILURE" during JCo call.
java.lang.reflect.UndeclaredThrowableException</SAP:Stack>
<SAP:Retry>A</SAP:Retry>
</SAP:Error>
Could please tell me why I am facing this problem only when I am using Dynamic configuration code.
If I dont use Dynamic configuration code then I am not getting any error .But my requirement is to generate dynamic file name (Note I have tried with Variable Substution also, It is also not solving my problem as I need time stamp of ("CET") time zone).

Hi Abhishek,
Yes I have appended throws StreamTransformationException and imported the relevant StreamTransformationException class also.
Here I am getting strange thing when I am adding dynamic configuration code " SYSTEM FAILURE" during JCo call. But Jco cal is something to internal systems which does not relate to Dynamic Configuration.
If I run my code with out any Dynamic Configuration code then it is running with out any errors.
But I need this Dynamic Configuration inorder to generate dyanamic file name.

System failure, during call of function module RSWR_RFC_SERVICE_TEST

Hi Team,
     I am working with BW and Portal Integration, with the Netweaver
2004s SP 11 version. I have a issue when i run the RSPOR_SETUP program
to test the configuration.
The error is on status 5 and 12, i get the following error:
System failure, during call of function module RSWR_RFC_SERVICE_TEST,
and when i enter at the dev_jrfc.trc log file, i have the following
error:
Exception thrown [Tue Jul 10 16:12:16,687]:Exception thrown by
application running in JCo Server
java.lang.RuntimeException: call FM RSWR_RFC_SERVICE_TEST to ProgId
smxpedvc_PORTAL_EPD on host smxpedvc.grupoempresarialangeles.com.mx
with SSO not authorized: No login module succeeded.
        at
com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest
(RFCDefaultRequestHandler.java:79)
        at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequest
(RFCJCOServer.java:156)
        at com.sap.mw.jco.JCO$Server.dispatchRequest(JCO.java:7785)
        at com.sap.mw.jco.MiddlewareJRfc$Server.dispatchRequest
(MiddlewareJRfc.java:2405)
        at com.sap.mw.jco.MiddlewareJRfc$Server.listen
(MiddlewareJRfc.java:1728)
        at com.sap.mw.jco.JCO$Server.listen(JCO.java:8145)
        at com.sap.mw.jco.JCO$Server.work(JCO.java:8265)
        at com.sap.mw.jco.JCO$Server.loop(JCO.java:8212)
        at com.sap.mw.jco.JCO$Server.run(JCO.java:8128)
        at com.sap.engine.core.thread.impl3.ActionObject.run
(ActionObject.java:37)
        at java.security.AccessController.doPrivileged(Native Method)
        at com.sap.engine.core.thread.impl3.SingleThread.execute
(SingleThread.java:100)
        at com.sap.engine.core.thread.impl3.SingleThread.run
(SingleThread.java:170)
Could you help me to solve this issue.
Thanks so much.

Have you checked the user that is used to connect from J2EE back to ABAP?
I had a similar problem, went into the Visual Administrator and found the incorrect password (or possibly outdated password) was being used to communicate back to ABAP, and updating that sorted out my problem.
Hope this helps.
Cheers,
Andrew

System Failure during locking GL Account 13113910 - Cenvat Suspense Account

Dear All,
While creating Excise Invoice ( in India) using J1IIN, system is giving error " System Failure during locking GL Account 13113910 " The error message No. is 8i076.
System is not allowing to create Excise Invoice.
Can anybody help me how to overcome this problem?
Thanks & regards,
Govind

<a href="https://service.sap.com/sap/support/notes/867529">Apply SAP note 867529</a>

"SYSTEM FAILURE" during JCo call. max no of 100 conversations exceeded

Hi Experts,
My scernario is : RFC->File Asynch
When i do testing this scenario in Configuration (ID) -> tools-> test configuration I got below error.
Interface Mapping
Runtime error
"SYSTEM FAILURE" during JCo call. max no of 100 conversations exceeded / CPIC-CALL: 'ThSAPCMRCV' : cmRc=17 thRc=45
1) I have created incremented 100 to 300: Set the following environment variable CPIC_MAX_CONV=300
2) In sender RFC communication channel i have all correct parameters like: gateway service,Program ID, client number, password, userid etc
Pleas help me out.
thanks
siva grandhi

hi,
se this
/thread/174978 [original link is broken]
Look at SAP note 314530,316877
set this enviroment Variables:
set CPIC_MAX_CONV = 500 (WINDOWS)
setenv CPIC_MAX_CONV 500 (unix)
also check the rfc destination JCO_RUNTIME_JCOSERVER
AI_RUNTIME_JCOSERVER. if u have any error in this RFC plz refer to this link
http://help.sap.com/saphelp_nw04s/helpdata/en/9b/da0f41026df223e10000000a155106/frameset.htm
Thanks
Rodrigo
ps:reward points if useful
Edited by: Rodrigo Pertierra on Mar 26, 2008 11:59 AM

Error "SYSTEM FAILURE: - NULL" while configuring Planning 9.3

Similar Messages

Maybe you are looking for