Error "system not configured as xmb" in transaction "sxmb_moni"

Hi,
when I send an IDoc from R3 to XI I get this error:
system not configured as xmb" in transaction "sxmb_moni"
also, in the adaptermonitor of the runtime workbench there is an error in the integration engine.
"no rules for business-system are definied in SXMS_CONF_ITEMS"
This error refers from a another error in transaction idx. so, we have assigned the integration engine client 100, because we work with this client. So, we can start transaction idx5 but, we get the other error, as mentioned.
Can anybody help me please?
Regards
Stefan

Hi Stefen,
try to chk SLD-->Business systems...and check the role of business system Web AS ABAP (tht was created during installation)...check if the role is integration server if not try sxi_cache and in the menu tool bar goto "GoTo" and click AE cache and see if the link is fine
pls chk for this links
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ceba9b90-0201-0010-9687-a8b279e388bb
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/909760cb-0ec8-2a10-4a96-ee8417acfbc9
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/909760cb-0ec8-2a10-4a96-ee8417acfbc9
if found worth pls do the req
Thanx
Sampath

Similar Messages

Error: System not configured as Integration Engine

Hi ,
I was trying to simulate the following scenario in SAP XI:
HTTP--> SAP XI --> (RFC/BAPI)SAP R/3
Let me clear what i did.
I have to call a BAPI using RFC adapter in XI to display some information on a request of some Http app.
1. I have Imported the RFC BAPI into IR.
2. I have created the XSD files for http Re and res messages.
3. I have created the XSLT mapping programs and put them in a zip file and imported into IR.
4. I have created a Interface mapping and assign the created messages and mapping programs.
5. In ID i have created a Business service for my web application.
6. Receiver determination created in Id and Interface determination and receiver agreement in ID and activated the changes.
7. I have tested the same by sending the request from my web application to xi plain http adapter as follows:
http://grserver:8000/sap/xi/adapter_plain?bs=XIWS_web&namespace=urn%3Axi%3Asap%3Awebapp&interface=HTTP_out&qos=BE
and in the result i have got the following error:
"System not configured as Integration Engine"
but i have tried it many times and some times it gives me correct results but after that the same error ios coming.
so can you tell me what could be wrong in the configuration of XI of what is the solution for this problem.
Reagrds
Gopesh Kumar Agarwal

Hi,
What is the version of XI you are using? If u are usign XI2.0, ur URL is correct. But if you are using XI3.0 then use service=<SENDERSERVICE>instead of
bs=<SENDERSERVICE> parameter in your URL.
bs is replaced by service in XI3.0
Your URL will be http://grserver:8000/sap/xi/adapter_plain?service=XIWS_web&namespace=urn%3Axi%3Asap%3Awebapp&interface=HTTP_out&qos=BE
Hope this helps you.
Cheers,
Siva Maranani.
Message was edited by: siva maranani
Message was edited by: siva maranani

Generated Proxy Error: System not configured as XI Integration Engine

Dear all,
Using transaction SPROXY I generated a proxy on a Message Interface.
This generated as well a method and the associated class.
When I run it, trying to send data through all this, I get the following error:
System not configured as XI Integration Engine
Here is the model I got on another thread, in order to catch the error text:
DATA: l_sys_exception TYPE REF TO cx_ai_system_fault.
*...proxy call
catch CATCH CX_AI_SYSTEM_FAULT into l_sys_exception.
write: l_sys_exception->errortext.
Anyone has any idea where this error commes from?
I am mostly wondering whether the problem comes from my outbound system or XI configuration?
Thanks a lot, have a nice day!
Isa.

check this thread
https://forums.sdn.sap.com/click.jspa?searchID=2727912&messageID=1877263

Error: System not configured as XI Integration Engine

Hi All,
I a getting this following error in RWB-->message monitoring -->adapter engine -->audit log
"2007-11-29 09:28:45 Error Received XI System Error. ErrorCode: SYSTEM_NOT_CONFIGURED_AS_XMB ErrorText: ErrorStack: System not configured as XI Integration Engine
2007-11-29 09:28:45 Error Transmitting the message to endpoint http://p2p:8003/sap/xi/engine?type=entry using connection AFW failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: SYSTEM_NOT_CONFIGURED_AS_XMB:.
what might be the possible errors..
regards,
Rajesh

Hi Rajesh,
you can go through these chek steps
1)go to SLD-->Business systems...and check the role of business system Web AS ABAP (tht was created during installation)...check if the role is integration server
2) go to sxi_cache and in the menu tool bar goto "GoTo" and click AE cache and see if the link is fine? whether the link in sxi_cache for AE cache is showing green traffic signal and also perform a delta refresh.
3)Check whether your business system is tied to the integration server in SLD.
4)In the transaction sxmb_adm -> Integration Engine Configuration can you check whether that role has been defined as Integration Server.
hope these checks will solve your problem
Thanks
sandeep sharma
PS:If helpful Plz reward points
Also you may check whether in specific configuration you may need to add Category as Runtime Engine_Type and current value as HUB.

System not configured as Integration Engine

Hi Friends ,
I have written an outbound client proxy for my interface . I am using XI to File Adapter scenerio .
When I run the zprogram in R3 then I get the error
System not configured as Integration Engine ...
Please suggest .
Best Regards
Chan

Hi Chane,
Go to SXMB_ADM->Configuration->Integration Engine COnfiguration->Choose your R/3 system as Application System
Refer this Configuration Guide - Page no 27
https://websmp102.sap-ag.de/~sapidb/011000358700001697502004E.PDF
Regards,
Moorthy

System not configured as XI Integration Engine

Hi
I trigger an interface and get the error " System not configured as XI Integration Engine ". I get this error at the Call Adapter stage. How do I check in the receipient system ?
Regards

Hey,
You can find similar issue faced by other and solution in SDN.
Have a look at these threads.
System not configured as XI Integration Engine
SYSTEM_NOT_CONFIGURED_AS_XMB
regards
Ramesh

Error with Transport system not configured that may be related to CHaRM

Who has in depth knowledge on setting up SAP Solution Manager CHaRM. Had an odd problem with the transport system failing when the QA system was shut down for maintenance. Transports were not able to be created or save to. Error message was Transport System not configured. Brought up QA and re-distributed system and Transport group and transport requests started working again.

Hello,
if a system, e.g. QA system, will not be available due to a maintenance task,
we set the status of this system to "temporarily inactive" (see header data in transaction SMSY).
This status allows us, to create new transport requests in DEV-System although consolidation system QA is not available.
(Of course you have to reset the status, when QA-system ist started again.)
Hint: it is not possible to release or to import a transport request, when consolidation system is shut down.
Therefore the developer should pay attention to the messages, which raise in urgent corrections.
best regards
Horst

IDOC Scenario: System not configured as XI integarton engine

Hello Experts,
I have beeen trying to solve this since a few days.
I have created an IDOC scenario from SAP ECC s/m to PI 7.0.
The IDOC is being sent successfully fron SAPECC with status 03 in Transaction WE05.
But in PI 7.0 I am not able to view these messages anywhere in WE05.
SXMB_MONI of PI 7.0 shows an error record for previous trials and shows error status (red) as "System not configured as XI integration engine"
I have already set configuration parameters on PI7.0 in SXMB_adm.
Your suggestions will be appreciated.
Thanks in advance,
Elizabeth.

Hi,
you can check in PI:
- TCODE - SXMB_ADM
- integration server
- edit - change global config - check if you have: integration server set
Regards,
Divya

System not configured as XI Integration Engin

Hi Experts,
My system working fine up to yesterday but today morning when i came and saw this error is comming System not configured as XI Integration Engin this error is showing in MONI ..
Regards
Rao

Hi rao,
Please see the following links.
ERROR Integration Engine configuration
one more
integration engine
Kindly reward points for useful answer.
Regards,
Vishal

Change and transport system not configured

hi
Please anybody help me on this. I installed SAP IDES4.7 on Win Xp with Oracle9.2. It is working good except one error. when i click on anymenu item in GUI a popup says " change and transport system not configured'.
How to fix this?
i appreciate your help in advance. Thanks
Madhu

Hi
After installing SAP IDES4.7 u have to do post-installation.As a postinstallation u have to configure the STMS(sap transport management system)
STMS is mainlly used for moving objects from one system to other system
Regards
kiran kumar.v

Error:System not assigned to a host

Hi,
I am trying to download maintenance stk SRM 7.0 SPS 5.0, via solman, but I am getting the error called "Error:System not assigned to a host" in the stage where solman looks for OS/DB dependent files.
When I go back and check the entries in SMSY, all the relevant entries are present there..
Could anyone has encountered this before?
Thanks
Abhishek

>
Abhi wrote:
> Hi,
>
> I am trying to download maintenance stk SRM 7.0 SPS 5.0, via solman, but I am getting the error called "Error:System not assigned to a host" in the stage where solman looks for OS/DB dependent files.
> When I go back and check the entries in SMSY, all the relevant entries are present there..
> Could anyone has encountered this before?
>
> Thanks
> Abhishek
Hi Abhisek,
are you sure that is in TX "smsy -> Systems -> <your SID> -> logical Component -> Header Data" an entry at the field "message Server" ?
I think that is meant with host.
regards
Tobias

[Solved] wlan0 dhcpd error, interface not configured

Hi,
I am trying to manually configure my wireless card to use dhcp. I followed the wireless setup wiki page, installed the driver, added the module to rc.conf, and verified that it is working by running 'ifconfig -a' and 'iwlist wlan0 scan'. So far so good. My wireless network is WPA protected, so I set up wpa_supplicant according to that wiki page and that seems to be working too. When I run 'dhcpd wlan0', I get error messages such as "No subnet declaration for wlan0" and "Not configured to listen on any interfaces".
I tried setting up dhcpd.conf according to http://bbs.archlinux.org/viewtopic.php?id=49114 and http://bbs.archlinux.org/viewtopic.php?id=49131, but neither worked. I also tried adding wlan0 to the interfaces array in rc.conf (similarly to eth0--which works), but that didn't help either.
I tried this on an open/unsecured network and got the same result.
I found a Red Hat thread that said /etc/sysconfig/dhcpd needs to list the interfaces for dhcpd (http://www.linuxquestions.org/questions … es-372977/). Is there something similar for arch?
thanks in advance for any help,
Kyle
Last edited by kyletreubig (2009-09-22 10:45:21)

I played around with it a bit more last night and I got it to work. For some reason, the subnets 129.168.0.x and 10.0.0.x didn't work and I needed to specify a subnet of 129.168.1.x. I noticed that eth0 was getting assigned an IP of 192.168.1.100, so I decided to include that in my subnet. I also restricted the range to 192.168.1.100-200.
Thanks for the help,
Kyle

Disk Utility Restoring Error - Device not Configured

Hi all,
A mate has given me a USB flash drive that doesn't work. I tried to create an backup image using Resuce Pro from SanDisk and it came up with a NDIF file. What I then did was partioned an external hard drive and restore using the image as source and the new partition as destination. 2 seconds later an error comes up saying restore error, could not validate source - device not configured. Am I the only one that has this problem or have I done anything wrong during the process?
Cheers,
Keefe

NDIF is an obsolete format. You'd probably have to convert it to some kind of DMG first (Images > Convert.)

Error Mapping Not Configured

Dear Guys
I am using a scenario RFC to File from book named SAP XI for developers.
I have created a RFC FM in system A which will be used to create a IDOC in system B. Calling RFC will create a file in XI and in second step file to IDOC will be create in SystemB
I am getting follwing error.
<P1>com/sap/xi/tf/_MM_Z_RFM_MATERIALINPUT_00_to_MT_Ma~</P1>
<P2>com.sap.aii.utilxi.misc.api.BaseRuntimeException</P2>
<P3>RuntimeException in Message-Mapping transformatio~</P3>
Trace level="1" type="T">com.sap.aii.utilxi.misc.api.BaseRuntimeException: RuntimeException in Message-Mapping transformation: Cannot produce target element /ns1:MT_Material/MATNR. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:403) at
com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:141) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute
While I Test Mapping through Integration Repository its working succesfully. But while running Program from System A is not creating a File in XI.
Note : System A , XI and System B are installed on three different machines.

Firstly make sure you have imported the updated RFC into IR..
goto the sxmb_moni and copy yhe payload from the inbond message piplelinestep on the right hand side, copy the payload and goto the test tab of MM and paste it there if this executes then MM is fine.
If MM is fine with copied XML..then refresh the ID cache, IR cache, run the delta cache from SXI_CACHE and CPA cache and check

Error--Instance DVEBMGS00 for system SID not configured

i am changing the instance profile in Basic Mainenance.
When i increase teh Dialog instance and click on copy, i am getting the message
Instance DVEBMGS00 for system <SID> not configured
But this system is running for the past one year.
Please let me know what i can do in this regard

Hello Balaji,
Your question is not very clear. Could not understand what you mean by "When i increase teh Dialog instance and click on copy,". Please explain all the steps you are taking.
Regards.
Ruchit.

Error "system not configured as xmb" in transaction "sxmb_moni"

Similar Messages

Maybe you are looking for