Error - System status CRTD is active

During order settlement following error is appeared
Error - System status CRTD is active.
Pls suggest the solution.

Hi ,
1. go to tcode BS22 (Maintain: System Status)
2. look for the system status CRTD.
3. Double click the field "CRTD".
4. in the transaction control tab look for the business transaction "RMWA" or goods movement (you can type it in the lower left corner buttom box bcoz there will ber many entries , and it will be very difficult to find RMWA).
5. select the radio button from "Forbidden" to "allowed".
6. save your changes
Regards,
Anupam
Edited by: Anupam Halder on Aug 3, 2009 11:59 AM

Similar Messages

  • Error in F110: System status CRTD is active (ORD 603625)

    Hi All,
    In APP, one of the vendor is going in to error .
    The log says System status CRTD is active (ORD 603625)
    When I check, for the particular item in vendor line item display, that is linked to the
    purchase order, which in turn is linked to the internal order 603625 . The internal Order 603625 is
    in CRTD status.
    I think the status of the order needs to be changed to TECO.
    But I have two questions here.
    1. What factors should be looked in to before changing the
         status of the order to TECO.
    2. Why the system is not able to make a payment when the ORDER is in CRTD status.
    Regards
    Rudra

    Hi Rudra,
    You received this error from the Status Management of the Internal Order.
    1. What factors should be looked in to before changing the status of the order to TECO.
    Actually, you should not change the status to TECO (Technically Complete) rather you should Release it then APP will be processed.
    2. Why the system is not able to make a payment when the ORDER is in CRTD status.
    Every status in the Order is assigned to the Transactions Allowed
    Common Scenario
    1. When status of the order is CRTD then you can only post budget to the order, you can not make FI Posting.
    2. When status is RELE then you can make an FI Posting.
    Ask the owner of the Internal Order to shift the status if conditions have been met.
    Regards,
    Chintan Joshi

  • System status CRTD is active

    Hi,
    I am having a problem with a service order. When i am tryin to book time on it using CAT2 i get an error message "System status CRTD is active."
    Can any one please advice what is that i need to do in order to remove this error message.
    Regards,
    Chinmaya

    Hi,
    In general if the Order is in CRTD State then you can not post any thing on that.
    So, make the Order to REL (Released Status) and Try..
    Regards,
    Siva

  • What does mean the error "System status DELT is active"?

    Hi Gurus,
    Can somebody tell me what does mean the error "System status DELT is active"?

    Hi Disha,
    I m getting the same message while trying to update the contract using FM "bbp_pd_ctr_update".
    When  I go and check the Item or header it is not marked for Deletion. Is there any table or field which indicates that it is marked for Deletion.
    Any help on this is highly appreciated.
    Regards
    Surender

  • Change PO--error "System status ITRE is active".

    Hi,
    When I am trying to release a PO manually i am getting one error message "Error changing to status RELP, System status CMPL is active" in transaction code SWO1.
    Thanks,

    Hello,
    ITRE status means: In Transfer to Execution Syst.
    Reprocess the PO using BBP_PD_PO_TRANSFER_EXEC.
    Helpful Note: 1090580
    Hope this helps.
    Thanks
    Ashutosh

  • Error-System status FMAI is active in Order....

    This error I'm getting while releasing one previously generated maintenance order.
    The error message details are;
    Diagnosis
    Object ORD 5000060696 has system status FMAI (FM account assignmt incomplete). According to this status, transaction 'Release' is not allowed.
    Procedure
    You can only carry out the requested function if this is allowed according to the status of the object.
    Can anybody reply, how to resolve this.

    hello!
    I think that your FM assignment is not completed.
    The FM account assignment for PM orders is automatically determined only
    once during the order creation. There is no automatic call of the FM
    account assignment derivation afterwards if you change, for example, a
    functional location. You will have to run Goto -> Assignments -> Funds
    Management to redetermine the account.
    Good luck!
    silvia

  • Getting Error Msg " System Status INCM is active (confirmation 7300012896)"

    Hi ,
    Whlie confirming Goods in "Confirm Goods/ Services" user is getting Error " System Status INCM is active ( confirmation 7300012896)
    Can you please tell how to rectify this error message and confirm goods against PO.
    Regards,
    Avdhut

    check - click before doing confirmation
    there many other error message thrown at bottom side
    any user locked of for network / PM order  order in the PO
    some message will be thrown
    share taht message for more help.
    Muthu

  • System status LKD  is active while doing ME21N

    Hi,
    While doing ME21N transaction system showing
    "Error: System status LKD is active ( ORD 300303)"
    Thanks and Regards
    SK

    Hi,
    First of all ,please make sure if the status lkd is already exist for
    the orders in koko4.If that's the case it is necessary to revoke the
    status LKD on these orders e.g. with transaction KO02.
    Best Regards,
    Arminda Jack

  • System status CLSD is active (ORD 4000111)

    Hi Guru,
    I tried to execute MIRO transaction however I encountered the error "System status CLSD is active (ORD 4000111)"
    Diagnosis
    Object ORD 4000111 has system status CLSD(Closed). According to this status, transaction
    incoming invoice" is not allowed.
    Procedure
    You can only carry the requested function if this is allowed according to the status of the object.
    Please advise me how to correct the error.
    Thanks,
    Memarslon

    Hi Guru,
    Thank you, Here we encounter an error related to closed order when using MIRO.Could you pls help to check how to revoke closed status.
    Thanks,
    Memarslon

  • System status DELT is active

    Hi,
    When I select the reject and save the shopping cart, I get error "System status DELT is active ".
    Please tell me what is wrong.
    Thanks.
    Regards,
    Henry

    Hello,
    DELT means: Your doc is marked for deletion.
    Hope this helps.
    Thanks
    Ashutosh

  • System status CLSD is active

    Hi,
    I tried to execute MIRO transaction however I encountered the error "System status CLSD is active (WBS C-0028747-01-01)
    Diagnosis
    Object WBS C-0028747-01-01 has system status CLSD(Closed). According to this status, transaction incoming invoice" is not allowed.
    Procedure
    You can only carry the requested function if this is allowed according to the status of the object.
    Please advise me how to correct the error

    Hi,
    Open the WBS in CJ20N tcode and undo status CLSD by selecting Edit>Status>Closed>Undo. Then save WBS and try MIRO. In CLSD status no transactions are permitted hence you are getting the error.
    Regards
    Shrikant

  • MR11 error message system status CLSD is active

    MR11 fails with error message system status CLSD is active . How to clear the PO line item which gives error message in MR11 system status CLSD is active .

    If you are using an account assigned PO then possibly the order(PM order, internal order etc) to which your PO refers might have status as CLSD.
    Check and reverse the status.

  • "System status AALK is active" and "System status LKD is active" errors

    Hi,
    We are on SRM 4.0.  When creating a shopping cart from a specific catalog the user is receiving two error messages.
    "System status AALK is active"    and    "System status LKD is active"
    How do I resolve these errors?

    It's more like a  CA-JVA-JVA-PP or PS-ST-INT-BAPI issue, recommend to report a message under one of the component.

  • System status INCM is active while doing the confirmation from SRM

    Hi,
    User is getting the below error while trying to create confirmation in SRM for some of the PO's.
    Partner XXX not found
    System status INCM is active (Confirmation XXXX)
    Partner not found XXX (Item 1)
    The version is SRM 4.0 (Classic scenario). We have already checked the user profile and it is consistent in the system. The BP record for this user in table BUT000 is all fine. User is able to create the confirmation for other PO's. Also we have checked the G/L account for any posting period issue. Everything is fine. The error is coming while user is trying to do the confirmation for some of the PO's.
    Any help is highly appreciated.
    Warm regards,
    Aswini

    The error is coming while user is trying to do the confirmation for some of the PO's.
    Check these POs to see if any of the partners are invalid. You could do this through "process purchase order" transaction. Sometimes this error occurs when one or several of the PO partners no longer exist, e.g. left the company, etc.

  • System status REL is active , Message no. BS013,CO88 COST-BY-SALES-ORDER

    Hi Experts,
    I meet error when i do the production order settlement"CO88" ,
    Which the production mode is cost-by-sales-order undifferentiated mode.
    the error information as bellow:
    System status REL is active (ORD XXXXX)
    Message no. BS013
    Diagnosis
    Object ORD XXXXXX has system status REL (Released).  According to this status, transaction 'settelemtn' is not allowed.
    Procedure
    You can only carry out the requested function if this is allowed according to the status of the object.
    Pls. Help in resolving.
    Best Regards,

    Dear Szymon and Mukthar,
          Fisrtly,Thank you for your help!
          I have changed the status "TECO"(the status is "TECO PCNF DLV  PRC  GMPS MANC SETC"),then I settlement the production order.
         The system still error:
    "Debit from actual settlement" not allowed (Sys. status REL, object VB0000000015000010)
    Message no. BS051
    Diagnosis
    The status check for the status object VB0000000015000010 indicated that the procedure "Debit from actual settlement" cannot be performed because Sys. status REL forbids it.
    System Response
    Procedure "Debit from actual settlement" is not performed.
    Procedure
    If procedure "Debit from actual settlement" is to be performed, the Sys. status REL of object VB0000000015000010 must be reset.
    Other statuses than Sys. status REL can also prevent the procedure. This message does not tell you all statuses which currently prevent procedure "Debit from actual settlement".
    Regards!
    Gang.Tian
    remark:
    I use the MTO mode, the receiver of settlement is SALES ORDER.(the settlement rule is SDI)

Maybe you are looking for

  • Issue with Save As button

    Hi All, We are on NW2004s SP15. I have a BI iView that runs on the BI Portal. The report runs absolutely fine, but the problem is, when I click on the "SAVE AS" button and then select the "Bex Portfolio" tab, give the description and click on OK, the

  • How to get Lightroom 5.7 to display in full screen mode on Mac Yosemite?

    How can I get Lightroom 5.7 to display in full screen mode in Yosemite (Mac OS X 10.10.1)? Of course, that old full screen button at the top right of the window is gone now in Yosemite, but the third button in the top left of the window (the one that

  • QSS WONT OPEN IN BROWSER---UPGRADED TO 10.3.9 FROM 10.2 NOW NO WORK

    ERROR MSG:: Safari can't open the page "http://127.0.0.1:1220/" because it could not connect to the server "127.0.0.1". does anyone have any idea bout this???????? using for streaming live audio, and my music qss (darwin streaming server) version dow

  • Report opportunity revenue based on a snap shot

    Is it possible to pull a report on what expected opportunity revenue was on the 3rd day of the month from the analytics section of the reporting? We are looking to compare the expected closed revenue from the snapshot taken on the 3rd to the current,

  • Safari not loading pages, other browsers doing fine

    Hi, I have an issue many seem to have: Safari 7.0.5 (and now 7.0.6) hangs when loading web pages whereas other browsers (Chrome, Firefox) work just fine. I've ran my tests on WiFi with two different routers as well as through iPhone tethering. Here a