Error : T161W: Vendor+subcontracting vendor not allowed for 2-step stock tr
Hi Gurus,
When we creating a STO to sub contractor vendor ( in the delivery address tab we are entering the vendor # and activating the SC vendor check box)we are getting the error message as "T161W: Vendor+subcontracting vendor not allowed for 2-step stock transfer".
Message no: MEPO140
Note:
The STO is creating with out error in ECC 5.0 for the above scenario but when i'm trying the same in ECC 6.0 in another system I'm getting this error, Can any one please advice.
Thanks in advance,
Sai
Hi Charlie
I had same issue and we sloved it. but i have one more issue here.
We have created Po and SC Vendor is not check marked. When we go into the change mode of Po i can't see the field at all. but its availalbe in disply mode.
I am using ECC 6.0, Please suggest why this is happening. I need to put check mark for SC vendor.
thanks,
Raju
Similar Messages
-
Appreciate any help I can get. Was working on a project and hoping I did not lose it.
That was my first attempt at fixing the problem and it didn't work. I guess I'll try it again.
Edit: Nope, nothing -
Payment method(s) are not allowed for this program / Program RFFOAVIS_FPAYM
Dear Friends,
In Se38 abap editor, I entered the program RFFOM100, i entered the details program run date,identification future,paying company code,payment methods T, House bank, Account Id and executed the program. I am getting the error 'Payment method(s) are not allowed for this program'.
Payment method S is not used in F110, It was not mentioned in vendor master or vendor invoice.It is not mentioned in fbzp in bank determination. When i tried to delete payment method 'S' the system shows a message Payment Method S is being used in the company code.
In the program RFFOAVIS_FPAYM, i entered the details program run date,identification future,paying company code,payment methods T, House bank, Account Id and executed the program. I am getting the error 'Program RFFOAVIS_FPAYM: No records selected'. But there open items or invoices.
Please suggest how to resolve the errors.
Regards
SridharHello,
Why are you directly executing these programs?
You will not expect these program to execute directly by going to SE38.
I would have configured the relevant payment methods in the country with DME structure or classical RFFO* programs, which in turn pick up the inherent programs at the time of running F110.
For example, if you need to generate BACS file for country GB, either you copy the GB_BACS to ZGB_BACS or use GB_BACS directly in FBZP settings.
Make sure that you have maintained OBPM1 / OBPM2 / OBPM3 and OBPM4 settings properly.
The system automatically gives the access to system RFFOAVIS_FPAYM. Prepare a variant against this program in F110. Relevant file gets generated to folder path mentioned in OBPM4 will get generated. The file get generated can be seen in AL11.
Hope this is informative and solves your issue.
Regards,
Ravi -
Address list error -- 5.7.1 Relaying not allowed
Hi,
We have setup the Java Messaging Server to send/recieve mails from a gateway. The inbound mail flow works perfectly but, the outbound mail flow has issues.
The outbound mails are not hitting the gateway. When checked the log for outbound mail, it displays the address list error - 5.7.1 Relaying not allowed for any domain i.e gmail.com, etc
version:
Sun Java(tm) System Messaging Server 6.3-5.02 (built Oct 12 2007; 32bit)
libimta.so 6.3-5.02 (built 17:15:31, Oct 12 2007; 32bit)
SunOS P1192FLPLN 5.9 Generic_118558-02 sun4u sparc SUNW,Sun-Fire
here is the log for reference...
=========================================================================
root@P1192FLPLN # /opt/SUNWmsgsr/sbin/imsimta test -rewrite -debug -source_channel=tcp_local [email protected] [email protected]
Initializing mm_.
Initializing mm_ submission.
Checking identifiers.
*** Debug output from initializing MM for submission:
17:09:37.43: Debug output enabled, system P1192FLPLN.extmail.xyz.com, process 3fbf.1, message enqueue routines version V6.3 compiled Oct 12 2007 17:15:38
17:09:37.43: mmc_winit('tcp_local','[email protected]','') called.
17:09:37.43: Address reversal invoked on [email protected], force reverse URL 1, capture 1
17:09:37.43: Rewriting: Mbox = "abhishek.sen", host = "extmail.xyz.com", domain = "$*", literal = "", tag = ""
17:09:37.43: Rewrite: "$*", position 0, hash table -
17:09:37.43: Found: "$A$E$F$U%[email protected]"
17:09:37.43: Rewrite failed, not forward.
17:09:37.43: Rewrite: "$*", position 1, hash table -
17:09:37.43: Failed.
17:09:37.43: Rewrite: "$*", position 0, rewrite database -
17:09:37.43: Failed
17:09:37.43: Rewriting: Mbox = "abhishek.sen", host = "extmail", domain = "extmail.xyz.com", literal = "", tag = ""
17:09:37.43: Rewrite: "extmail.xyz.com", position 0, hash table -
17:09:37.43: Found: "$U%[email protected]"
17:09:37.43: New mailbox: "abhishek.sen".
17:09:37.43: New host: "extmail.xyz.com".
17:09:37.43: New route: "P1192FLPLN.extmail.xyz.com".
17:09:37.43: New channel system: "P1192FLPLN.extmail.xyz.com".
17:09:37.43: Looking up host "P1192FLPLN.extmail.xyz.com".
17:09:37.43: - found on channel l
17:09:37.43: Routelocal flag set; scanning for % and !
17:09:37.43: Checking reverse URL cache for: [email protected]
17:09:37.43: Applying reverse URL pattern ldap:///$V?$N?sub?$R to: [email protected]
17:09:37.48: Resulting URL: ldap:///o%3Dextmail.xyz.com%2Co%3Dext?preferredlanguage,mailmsgmaxblocks,mail,mailalternateaddress,mailequivalentaddress?sub?(|([email protected])([email protected])([email protected]))
17:09:37.49: mmc_open_url called to open ldap:///o%3Dextmail.xyz.com%2Co%3Dext?preferredlanguage,mailmsgmaxblocks,mail,mailalternateaddress,mailequivalentaddress?sub?(|([email protected])([email protected])([email protected])), flags = 384
17:09:37.49: URL with quotes stripped: ldap:///o%3Dextmail.xyz.com%2Co%3Dext?preferredlanguage,mailmsgmaxblocks,mail,mailalternateaddress,mailequivalentaddress?sub?(|([email protected])([email protected])([email protected]))
17:09:37.49: LDAP URL identified
17:09:37.49: URL context #1 will be used
17:09:37.49: Performing URL search on: ldap:///o%3Dextmail.xyz.com%2Co%3Dext?preferredlanguage,mailmsgmaxblocks,mail,mailalternateaddress,mailequivalentaddress?sub?(|([email protected])([email protected])([email protected]))
17:09:37.53: mmc_read_url result: [uid=asen,ou=People,o=extmail.xyz.com,o=ext]
17:09:37.53: URL resolution returned: [uid=asen,ou=People,o=extmail.xyz.com,o=ext]
17:09:37.53: mmc_read_url result: [preferredlanguage] en
17:09:37.53: URL resolution returned: [preferredlanguage] en
17:09:37.53: Attribute index: 0
17:09:37.53: LDAP URL produced preferred language en
17:09:37.53: mmc_read_url result: [mailmsgmaxblocks] 700
17:09:37.53: URL resolution returned: [mailmsgmaxblocks] 700
17:09:37.53: Attribute index: 0
17:09:37.53: LDAP URL produced blocklimit 700
17:09:37.53: mmc_read_url result: [mail] [email protected]
17:09:37.53: URL resolution returned: [mail] [email protected]
17:09:37.54: Attribute index: 0
17:09:37.54: LDAP URL produced address [email protected]
17:09:37.54: No more results to return
17:09:37.54: Override postmaster: [email protected]
17:09:37.54: Preferred language en
17:09:37.54: Content return block limit now 700
17:09:37.54: Mapped return address: [email protected]
17:09:37.54: from_access mapping check: ||MAIL|tcp_local|[email protected]|
17:09:37.54: Queue area size 73232902, temp area size 2067314
17:09:37.54: 18308225 blocks of effective free queue space available; setting disk limit accordingly.
17:09:37.54: 1033657 blocks of free temporary space available; setting disk limit accordingly.
17:09:37.54: - passed.
17:09:37.54: Rewriting: Mbox = "abhishek.sen", host = "extmail.xyz.com", domain = "$*", literal = "", tag = ""
17:09:37.54: Rewrite: "$*", position 0, hash table -
17:09:37.54: Found: "$A$E$F$U%[email protected]"
17:09:37.54: Rewrite failed, not forward.
17:09:37.54: Rewrite: "$*", position 1, hash table -
17:09:37.54: Failed.
17:09:37.54: Rewrite: "$*", position 0, rewrite database -
17:09:37.54: Failed
17:09:37.54: Rewriting: Mbox = "abhishek.sen", host = "extmail", domain = "extmail.xyz.com", literal = "", tag = ""
17:09:37.54: Rewrite: "extmail.xyz.com", position 0, hash table -
17:09:37.54: Found: "$U%[email protected]"
17:09:37.54: New mailbox: "abhishek.sen".
17:09:37.54: New host: "extmail.xyz.com".
17:09:37.54: New route: "P1192FLPLN.extmail.xyz.com".
17:09:37.56: New channel system: "P1192FLPLN.extmail.xyz.com".
17:09:37.56: Looking up host "P1192FLPLN.extmail.xyz.com".
17:09:37.56: - found on channel l
17:09:37.56: Routelocal flag set; scanning for % and !
*** Debug output from rewriting a forward header address:
17:09:37.56: Rewriting: Mbox = "bhanu.prasad", host = "xyz.com", domain = "$*", literal = "", tag = ""
17:09:37.56: Rewrite: "$*", position 0, hash table -
17:09:37.56: Found: "$A$E$F$U%[email protected]"
17:09:37.57: Rewrite failed, not envelope.
17:09:37.57: Rewrite: "$*", position 1, hash table -
17:09:37.57: Failed.
17:09:37.57: Rewrite: "$*", position 0, rewrite database -
17:09:37.57: Failed
17:09:37.57: Rewriting: Mbox = "bhanu.prasad", host = "relianceada", domain = "xyz.com", literal = "", tag = ""
17:09:37.57: Rewrite: "xyz.com", position 0, hash table -
17:09:37.57: Failed.
17:09:37.57: Rewrite: "xyz.com", position 0, rewrite database -
17:09:37.59: Failed
17:09:37.59: Rewriting: Mbox = "bhanu.prasad", host = "relianceada", domain = ".com", literal = "", tag = ""
17:09:37.59: Rewrite: "*.com", position 0, hash table -
17:09:37.59: Failed
17:09:37.59: Rewrite: ".com", position 0, hash table -
17:09:37.59: Found: "$U%$H$D@TCP-DAEMON"
17:09:37.59: New mailbox: "bhanu.prasad".
17:09:37.59: New host: "xyz.com".
17:09:37.59: New route: "TCP-DAEMON".
17:09:37.59: New channel system: "TCP-DAEMON".
17:09:37.59: Looking up host "TCP-DAEMON".
17:09:37.60: - found on channel tcp_local
17:09:37.60: Rewriting: Mbox = "bhanu.prasad", host = "xyz.com", domain = "$*", literal = "", tag = ""
17:09:37.60: Rewrite: "$*", position 0, hash table -
17:09:37.60: Found: "$A$E$F$U%[email protected]"
17:09:37.60: Rewrite failed, not envelope.
17:09:37.60: Rewrite: "$*", position 1, hash table -
17:09:37.60: Failed.
17:09:37.60: Rewrite: "$*", position 0, rewrite database -
17:09:37.60: Failed
17:09:37.61: Rewriting: Mbox = "bhanu.prasad", host = "relianceada", domain = "xyz.com", literal = "", tag = ""
17:09:37.61: Rewrite: "xyz.com", position 0, hash table -
17:09:37.61: Failed.
17:09:37.61: Rewrite: "xyz.com", position 0, rewrite database -
17:09:37.61: Failed
17:09:37.61: Rewriting: Mbox = "bhanu.prasad", host = "relianceada", domain = ".com", literal = "", tag = ""
17:09:37.61: Rewrite: "*.com", position 0, hash table -
17:09:37.61: Failed
17:09:37.61: Rewrite: ".com", position 0, hash table -
17:09:37.63: Found: "$U%$H$D@TCP-DAEMON"
17:09:37.63: New mailbox: "bhanu.prasad".
17:09:37.63: New host: "xyz.com".
17:09:37.63: New route: "TCP-DAEMON".
17:09:37.63: New channel system: "TCP-DAEMON".
17:09:37.63: Looking up host "TCP-DAEMON".
17:09:37.63: - found on channel tcp_local
17:09:37.63: Rewrite rules result: [email protected]
17:09:37.63: Checking reverse URL cache for: [email protected]
17:09:37.63: Applying reverse URL pattern ldap:///$V?$N?sub?$R to: [email protected]
17:09:37.65: URL generation failed, status = 0
*** Debug output from rewriting a forward envelope address:
17:09:37.65: Rewriting: Mbox = "bhanu.prasad", host = "xyz.com", domain = "$*", literal = "", tag = ""
17:09:37.65: Rewrite: "$*", position 0, hash table -
17:09:37.65: Found: "$A$E$F$U%[email protected]"
17:09:37.65: Match, pattern = "xyz.com", current = "(*domaincheck*)"
17:09:37.65: old state = not checked.
17:09:37.65: Domain check on xyz.com.
17:09:37.66: Could not add domain result 0 to cache for xyz.com.
17:09:37.66: new state = fail pending.
17:09:37.66: Rewrite failed due to prechannel mismatch.
17:09:37.66: Rewrite: "$*", position 1, hash table -
17:09:37.66: Failed.
17:09:37.66: Rewrite: "$*", position 0, rewrite database -
17:09:37.66: Failed
17:09:37.66: Rewriting: Mbox = "bhanu.prasad", host = "relianceada", domain = "xyz.com", literal = "", tag = ""
17:09:37.66: Rewrite: "xyz.com", position 0, hash table -
17:09:37.66: Failed.
17:09:37.67: Rewrite: "xyz.com", position 0, rewrite database -
17:09:37.67: Failed
17:09:37.67: Rewriting: Mbox = "bhanu.prasad", host = "relianceada", domain = ".com", literal = "", tag = ""
17:09:37.67: Rewrite: "*.com", position 0, hash table -
17:09:37.67: Failed
17:09:37.67: Rewrite: ".com", position 0, hash table -
17:09:37.67: Found: "$U%$H$D@TCP-DAEMON"
17:09:37.67: New mailbox: "bhanu.prasad".
17:09:37.67: New host: "xyz.com".
17:09:37.67: New route: "TCP-DAEMON".
17:09:37.69: New channel system: "TCP-DAEMON".
17:09:37.69: Looking up host "TCP-DAEMON".
17:09:37.69: - found on channel tcp_local
address channel = tcp_local
forward channel = tcp_local
channel description =
channel caption =
channel user filter =
dest channel filter =
source channel filter =
channel flags #0 = BIDIRECTIONAL SINGLE_SYSTEM IMMNONURGENT NOSERVICEALL channel flags #1 = SMTP_CRLF MX IDENTNONENUMERIC DEFAULT
channel flags #2 = COPYSENDPOST COPYWARNPOST POSTHEADONLY HEADERINC NOEXPROUTE
channel flags #3 = LOGGING NORESTRICTED RETAINSECURITYMULTIPARTS
channel flags #4 = EIGHTNEGOTIATE HEADERKEEPORDER NOHEADERREAD RULES
channel flags #5 = TRUNCATESMTPLONGLINES
channel flags #6 = LOCALUSER REPORTNOTARY
channel flags #7 = SWITCHCHANNEL REMOTEHOST DATEFOUR DAYOFWEEK
channel flags #8 = NODEFRAGMENT EXQUOTA REVERSE NOCONVERT_OCTET_STREAM
channel flags #9 = NOTHURMAN INTERPRETENCODING USEINTERMEDIATE RECEIVEDFROM VALIDATELOCALNONE NOTURN
defaulthost = extmail.xyz.com extmail.xyz.com
linelength = 998
addrsperfile = 99
channel env addr type = SOURCEROUTE
channel hdr addr type = SOURCEROUTE
channel official host = tcp-daemon
channel queue 0 name = SMTP_POOL
channel queue 1 name = SMTP_POOL
channel queue 2 name = SMTP_POOL
channel queue 3 name = SMTP_POOL
channel after params =
channel daemon name = 10.8.51.126
channel user name =
urgentnotices = 1 2 4 7
normalnotices = 1 2 4 7
nonurgentnotices = 1 2 4 7
channel rightslist ids =
local behavior flags = %x0
expandchannel =
notificationchannel =
dispositionchannel =
tlsswitchchannel =
backward channel = tcp_local
unique identifier = [email protected]
header forward address = [email protected] (route (TCP-DAEMON,TCP-DAEMON)) (host xyz.com)
header reverse address = [email protected]
envelope forw address = [email protected] (route (TCP-DAEMON,TCP-DAEMON)) (host xyz.com)
envelope rev address = [email protected] (route (TCP-DAEMON,TCP-DAEMON)) (host xyz.com)
name =
mbox = bhanu.prasad
Extracted address action list:
[email protected]
Extracted 733 address action list:
[email protected]
Address list expansion:
*** Debug output from alias expansion:
17:09:37.76: Inner expand, level = 0, mailbox = [email protected]
17:09:37.76: Rewriting: Mbox = "bhanu.prasad", host = "xyz.com", domain = "$*", literal = "", tag = ""
17:09:37.76: Rewrite: "$*", position 0, hash table -
17:09:37.76: Found: "$A$E$F$U%[email protected]"
17:09:37.76: Match, pattern = "xyz.com", current = "(*domaincheck*)"
17:09:37.76: old state = not checked.
17:09:37.76: Domain check on xyz.com.
17:09:37.77: Could not add domain result 0 to cache for xyz.com.
17:09:37.77: new state = fail pending.
17:09:37.77: Rewrite failed due to prechannel mismatch.
17:09:37.77: Rewrite: "$*", position 1, hash table -
17:09:37.77: Failed.
17:09:37.77: Rewrite: "$*", position 0, rewrite database -
17:09:37.77: Failed
17:09:37.77: Rewriting: Mbox = "bhanu.prasad", host = "relianceada", domain = "xyz.com", literal = "", tag = ""
17:09:37.77: Rewrite: "xyz.com", position 0, hash table -
17:09:37.77: Failed.
17:09:37.79: Rewrite: "xyz.com", position 0, rewrite database -
17:09:37.79: Failed
17:09:37.79: Rewriting: Mbox = "bhanu.prasad", host = "relianceada", domain = ".com", literal = "", tag = ""
17:09:37.79: Rewrite: "*.com", position 0, hash table -
17:09:37.79: Failed
17:09:37.79: Rewrite: ".com", position 0, hash table -
17:09:37.79: Found: "$U%$H$D@TCP-DAEMON"
17:09:37.79: New mailbox: "bhanu.prasad".
17:09:37.79: New host: "xyz.com".
17:09:37.79: New route: "TCP-DAEMON".
17:09:37.80: New channel system: "TCP-DAEMON".
17:09:37.80: Looking up host "TCP-DAEMON".
17:09:37.80: - found on channel tcp_local
-13 expansion total.
*** Debug output from submitting an envelope address:
17:09:37.80: mmc_wadr(0x0017ae68,'[email protected]','[email protected]') called.
17:09:37.80: Copy estimate before address addition is 1
17:09:37.80: Parsing address [email protected]
17:09:37.80: Rewriting: Mbox = "bhanu.prasad", host = "xyz.com", domain = "$*", literal = "", tag = ""
17:09:37.80: Rewrite: "$*", position 0, hash table -
17:09:37.81: Found: "$A$E$F$U%[email protected]"
17:09:37.81: Match, pattern = "xyz.com", current = "(*domaincheck*)"
17:09:37.81: old state = not checked.
17:09:37.81: Domain check on xyz.com.
17:09:37.81: Could not add domain result 0 to cache for xyz.com.
17:09:37.81: new state = fail pending.
17:09:37.81: Rewrite failed due to prechannel mismatch.
17:09:37.81: Rewrite: "$*", position 1, hash table -
17:09:37.83: Failed.
17:09:37.83: Rewrite: "$*", position 0, rewrite database -
17:09:37.83: Failed
17:09:37.83: Rewriting: Mbox = "bhanu.prasad", host = "relianceada", domain = "
xyz.com", literal = "", tag = ""
17:09:37.83: Rewrite: "xyz.com", position 0, hash table -
17:09:37.83: Failed.
17:09:37.83: Rewrite: "xyz.com", position 0, rewrite database -
17:09:37.83: Failed
17:09:37.83: Rewriting: Mbox = "bhanu.prasad", host = "relianceada", domain = "
.com", literal = "", tag = ""
17:09:37.83: Rewrite: "*.com", position 0, hash table -
17:09:37.84: Failed
17:09:37.84: Rewrite: ".com", position 0, hash table -
17:09:37.84: Found: "$U%$H$D@TCP-DAEMON"
17:09:37.84: New mailbox: "bhanu.prasad".
17:09:37.84: New host: "xyz.com".
17:09:37.84: New route: "TCP-DAEMON".
17:09:37.84: New channel system: "TCP-DAEMON".
17:09:37.84: Looking up host "TCP-DAEMON".
17:09:37.84: - found on channel tcp_local
17:09:37.84: - adding address [email protected] to headers.
17:09:37.86: - orig_send_access mapping check: tcp_local|abhishek.sen@extm
ail.xyz.com|tcp_local|[email protected]
17:09:38.16: - failed.
17:09:38.16: Good address count 0 defer count 0
17:09:38.16: Copy estimate after address addition is 1
17:09:38.16: mmc_waend(0x0017ae68) called.
17:09:38.16: Copy estimate is 1
17:09:38.16: Queue area size 73232902, temp area size 2067288
17:09:38.16: 36616451 blocks of effective free queue space available; setting
disk limit accordingly.
17:09:38.16: 1033644 blocks of free temporary space available; setting disk li
mit accordingly.
Expanded address:
[email protected]
Submitted address list:
Address list error -- 5.7.1 Relaying not allowed: [email protected]
Submitted notifications list:
=========================================================================Do we have to make any changes on other config files except the imta.cnf and mappings file for inbound and outbound..
thanks for any help
Edited by: prasad0_0 on Jul 8, 2008 4:58 AMi have already setup the messaging server 6 months back.. followed the same procedure to route mails to a gateway..
made changes to the imta.cnf for outbound mail flow to the tcp_local and mappings file to accept inbound mail flow from the gateway. Its working perfectly on the older setup, but this now, have issues with new setup.
here is the imta.cnf file..
! IMTA configuration file
! part I : rewrite rules
! Domain Rewrite Rules.
! Uncomment this line to use domain rewrite rules
! from the configuration file instead of the domain database.
! Please refer to the iMS documentation for details.
!<IMTA_TABLE:domains.rules
! Rules to select local users
$* $A$E$F$U%[email protected]
P1192FLPLN.extmail.xyz.com $U%[email protected]
extmail.xyz.com $U%[email protected]
! ims-ms
.ims-ms-daemon $U%$H.ims-ms-daemon@ims-ms-daemon
! lmtp
!.lmtp $U%$H@lmtpcs-daemon
! lmtpn
!.lmtpn $U%$H@lmtpcn-daemon
! native
.native-daemon $U%$H.native-daemon@native-daemon
! pipe
.pipe-daemon $U%$H.pipe-daemon@pipe-daemon
! tcp_local
! Rules for top level internet domains
<IMTA_TABLE:internet.rules
! tcp_intranet
! Do mapping lookup for internal IP addresses
[] $E$R${INTERNAL_IP,$L}$U%[$L]@tcp_intranet-daemon
.extmail.xyz.com $U%$H.extmail.xyz.com@tcp_intranet-daemon
* $U%$&0.extmail.xyz.com
! reprocess
reprocess $U%reprocess.P1192FLPLN.extmail.xyz.com@reprocess-daemon
reprocess.P1192FLPLN.extmail.xyz.com $U%reprocess.P1192FLPLN.extmail.xyz.com@reprocess-daemon
! process
process $U%process.P1192FLPLN.extmail.xyz.com@process-daemon
process.P1192FLPLN.extmail.xyz.com $U%process.P1192FLPLN.extmail.xyz.com@process-daemon
! defragment
defragment $U%defragment.P1192FLPLN.extmail.xyz.com@defragment-daemon
defragment.P1192FLPLN.extmail.xyz.com $U%defragment.P1192FLPLN.extmail.xyz.com@defragment-daemon
! conversion
conversion $U%conversion.P1192FLPLN.extmail.xyz.com@conversion-daemon
conversion.P1192FLPLN.extmail.xyz.com $U%conversion.P1192FLPLN.extmail.xyz.com@conversion-daemon
! bitbucket
bitbucket $U%bitbucket.P1192FLPLN.extmail.xyz.com@bitbucket-daemon
bitbucket.P1192FLPLN.extmail.xyz.com $U%bitbucket.P1192FLPLN.extmail.xyz.com@bitbucket-daemon
! deleted
deleted-daemon $U%$H@deleted-daemon
.deleted-daemon $U%$H@deleted-daemon
! inactive
inactive-daemon $U%$H@inactive-daemon
.inactive-daemon $U%$H@inactive-daemon
! hold
hold-daemon $U%$H@hold-daemon
.hold-daemon $U%$H@hold-daemon
! part II : channel blocks
defaults notices 1 2 4 7 copywarnpost copysendpost postheadonly noswitchchannel immnonurgent maxjobs 7 logging defaulthost extmail.xyz.com extmail.xyz.com
! delivery channel to local /var/mail store
l subdirs 20 viaaliasrequired maxjobs 7
P1192FLPLN.extmail.xyz.com
! ims-ms
ims-ms defragment subdirs 20 notices 1 7 14 21 28 backoff "pt5m" "pt10m" "pt30m" "pt1h" "pt2h" "pt4h" maxjobs 2 pool IMS_POOL fileinto $U+$S@$D
ims-ms-daemon
! native
native defragment subdirs 20 maxjobs 1
native-daemon
! pipe
pipe single defragment subdirs 20
pipe-daemon
! tcp_local
tcp_local smtp mx single_sys remotehost inner switchchannel identnonenumeric subdirs 20 maxjobs 7 pool SMTP_POOL maytlsserver maysaslserver saslswitchchannel tcp_auth missingrecipientpolicy 0 loopcheck daemon 10.8.51.126
tcp-daemon
! tcp_intranet
tcp_intranet smtp mx single_sys subdirs 20 dequeue_removeroute maxjobs 7 pool SMTP_POOL maytlsserver allowswitchchannel saslswitchchannel tcp_auth missingrecipientpolicy 4
tcp_intranet-daemon
! tcp_submit
tcp_submit submit smtp mx single_sys mustsaslserver maytlsserver missingrecipientpolicy 4
tcp_submit-daemon
! tcp_auth
tcp_auth smtp mx single_sys mustsaslserver missingrecipientpolicy 4
tcp_auth-daemon
! tcp_tas
tcp_tas smtp mx single_sys allowswitchchannel mustsaslserver maytlsserver deliveryflags 2
tcp_tas-daemon
! tcp_lmtpss (LMTP server - store)
!tcp_lmtpss lmtp flagtransfer
!tcp_lmtpss-daemon
! tcp_lmtpcs (LMTP client - store)
!tcp_lmtpcs defragment lmtp port 225 nomx single_sys subdirs 20 maxjobs 7 pool SMTP_POOL dequeue_removeroute
!lmtpcs-daemon
! reprocess
reprocess
reprocess-daemon
! process
process
process-daemon
! defragment
defragment
defragment-daemon
! conversion
conversion
conversion-daemon
! bitbucket
bitbucket
bitbucket-daemon
! deleted
deleted
deleted-daemon
! inactive
inactive
inactive-daemon
! hold
hold
hold-daemonand mappings file..
! MTA mappings file
! for access control and other table lookups
FROM_ACCESS
! Entries to block certain submissions normally would be inserted here,
! above the ntended-to-be-final entries that while permitting submission,
! merely disable any potential "vacation" effect.
! The following entries disable Sieve "vacation" action on lists sorts
! of addresses, as recommended by the Sieve "vacation" extension draft.
*|SMTP*|*|*|MAILER-DAEMON@*|* $!$Y
*|SMTP*|*|*|LISTSERVE*@|* $!$Y
*|SMTP*|*|*|majordomo@*|* $!$Y
*|SMTP*|*|*|*-request@*|* $!$Y
*|SMTP*|*|*|*-owner@*|* $!$Y
*|SMTP*|*|*|owner-*@*|* $!$Y
PORT_ACCESS
*|*|*|*|* $C$|INTERNAL_IP;$3|$Y$E
* $YEXTERNAL
INTERNAL_IP
$(10.8.55.49/24) $Y
$(10.8.51.125) $Y
$(10.8.51.126) $Y
127.0.0.1 $Y
* $N
ORIG_SEND_ACCESS
tcp_local|*|tcp_local|* $N$D30|Relaying$ not$ allowed
tcp_*|*|native|* $N
tcp_*|*|hold|* $N
tcp_*|*|pipe|* $N
tcp_*|*|ims-ms|* $N
! Block "external" submissions of explicitly source-routed "internal" addresses
tcp_local|*|tcp_intranet|@*:*.* $N$D30|Explicit$ routing$ not$ allowed
tcp_local|*|tcp_intranet|*$%*@* $N$D30|Explicit$ routing$ not$ allowed
tcp_local|*|tcp_intranet|*.*!*@* $N$D30|Explicit$ routing$ not$ allowed
tcp_local|*|tcp_intranet|"*@*"@* $N$D30|Explicit$ routing$ not$ allowed
SEND_ACCESS
tcp_*|*|*|*@[127.*] $X5.1.2|$NBad$ destination$ system
tcp_*|*|*|*@localhost.* $X5.1.2|$NBad$ destination$ system
tcp_*|*|*|*@example.com $X5.1.2|$NBad$ destination$ system
tcp_*|*|*|*@example.net $X5.1.2|$NBad$ destination$ system
tcp_*|*|*|*@example.org $X5.1.2|$NBad$ destination$ system
tcp_*|*|*|*@*.test $X5.1.2|$NBad$ destination$ system
tcp_*|*|*|*@*.example $X5.1.2|$NBad$ destination$ system
tcp_*|*|*|*@*.invalid $X5.1.2|$NBad$ destination$ system
tcp_*|*|*|*@*.localhost $X5.1.2|$NBad$ destination$ system
<IMTA_TABLE:mappings.localewe are able to receive mails from the gateway, but when using uwc to send the mail, the mail doesnt hit the gateway. trying a telnet from the messaging server to the gateway, works perfectly.
thanks in advance. -
Set type COMM_PR_UNIT is not allowed for product type
Hello all, I am working in SRM 7.0 and when I try to replicate service master (DNL_CUST_SRVMAS) I have this error:
Set type COMM_PR_UNIT is not allowed for product type
What can I do? I think that is an ABAP problem
Thanks in advance
Rosa RodríguezRosa,
This note is something different and nothing to do with the issue. Can you share how did you resolve the DNL_CUST_SRVMAS issue? We are also getting same error.
Thanks,
Jagadish -
Material xyz not allowed for sales from India
Hai Gurus,
can any body give me solution for this....
i am getting this error in VL01n
"material xyz not allowed for sales from India"
when i click on error it was taxation error...
and if i cross chk in mm02.xd02 evrything is correct for SP...
where i am doing mistake
Kindly Help.......Hi Venkat
Question sounds redundant, but did you maintain tax data in sales org view for Country INDIA ? Because after you setup Plant in India, you should start seeing country code IN in your tax data view under sales org view of material master, unless you have other plants already setup in Country IN before this one, then you shouldn't get this error. Reward points if useful.
regards
Suri -
FI posting not allowed for WBS Element
Hi All,
While doing down payment billing I'm getting error that FI posting is not allowed for WBS element. But FI periods are open for all months in 2008.
Please suggest how to resolve this issue.
Regards,
HarishHello
Account assignment
If you want to post actual costs and commitments to a WBS element, you have to indicate that the WBS element is an account assignment element in the WBS. All objects that can be assigned costs and commitments within a project (for example, orders, networks, or purchase orders) can only be assigned to a WBS element if you have set the account assignment indicator for the element.
In Customizing for the Project System, you can set an indicator to specify that costs are planned for all WBS elements or only for specific WBS elements.
Billing
If you want to post revenues to a WBS element, you have to indicate that the WBS element is a billing element in the WBS.
Reg
assign points if useful -
Funds Management BCS error: Combination ENTR / A1 is not allowed in budget
I just applied Budget Control System in Fund Management module. I use FMBBC to enter budget value. I select BCS value type B1, Process ENTR, Type A1 and enter Fund Center/Commitment Item value. Whenever i tried to save, it always show error Combination ENTR / A1 is not allowed for status ADEC, Budget. Same error with any other combination.
I already assigned budget type and process combination in FM area (Budget Control System (BCS) > Budgeting > Basic Settings > Definition of Budget Data > Budget Types > Assign Budget Types to Processes (Mass Maintenance)
What setting did I missed? ThanksHi,
Chech the 'Status' configuration in BCS Budgeting - Control Budgeting Flow - Edit Status.
Regards,
Eli -
Wild Cards are not allowed for this info object
Hello Experts,
I am getting some problem, when I trying to find the some selections for info object in variable selection screen; it giving some error like u201CWILD CARDS" are not allowed for this info object.
I am trying to find the search item like this: TELENOR*
When I click on find button it is giving error.
Please any body help me in this matter.
Thanks & Regards
Prathap.Hi,
You need to create a selections option variable on the characteristic that needs to be filtered.
After doing this, when you run the query, select the * from the dropdown box,and give the value.
Hope this helps u..!!
-Pradnya -
Create PO condtion FRA1 "One-time vendor not allowed for this transaction"
Hi all,
When create Freight conditon for po item, if i choose a one-time vendor , it gives me an error "One-time vendor not allowed for this transaction" .
Why it happened? How to config system let one-time vendor be the conditon's vendor ?
Thanks .dear wayne,
what is your account group for the vendor if OTA (one time account ) is ticked for that account, the system will not allow you to give the condition type FRA1.
Please correct me if I m wrong and revert back if any doubt.
Njoy
Ashish -
Vendor Creation ,Partner role OA not allowed for Vendor of a/c group ZLOV
Dear Freinds,
I am facing problem of Vendor creation , i am getting message PARTNER ROLE OA NOT ALLOWED FOR VENDOR OF ACCOUNT GROUP ZLOV.
While creation of Vendor in Partner function i could not enter partner number, system is not accepting any data, message is getting as above.due to which i could not create any vendor.
Presently I am in process/ setting of ERS functionality in MM,
now all my Vendor creation is stuck up ,
please help me how to solve the problem
Regards
DilipHi Dilip,
Check first have you Define Permissible Partner Roles per Account Group..
Check the path:
SPRO-Materials Management-Purchasing-Partner Determination-Define Permissible Partner Roles per Account Group
Here check whether OA is assigned with ZLOV or not...If no then click on new entries and enter partner function as OA and Vendor account group ZLOV...Save nd come out...
Now proceed...Hope it helps..
Utsav -
Error in RZ20 - 06355 Purchasing organization QRP1 not allowed for plant 1
Hi all,
We have setup a new purchasing organisation in SRM 4.00.
I have got all my vendors in now and plants, how do i assign the plant to the correct Purchas org?
I can create a cart but i get the message 06355 Purchasing organization XXXX not allowed for plant YYYY
any ideas guys?
Regards
SteveHi, Steve
This is a backend error, check the following in backend.
(tr:SPRO)
Enterprise Structure
Assignment
Materials Management
Assign purchasing organization to plant
Regards
Lauren -
When making vendor down payment, not allowing to enter bank charges
Hi!
When making down payment to vendor, need to be entered bank charges. But system is not allowing for the same.
Regards,
MouryanHi,
check in FBKP whether bank charges gl assigned or not, if not, assign it.
Otherwise you can post charges by debiting to the concerned GL.
Regards,
Dharani -
Combination of GR/IR Control not allowed for External Services-SRM PO error
Hi All,
SRM 5.0 ECS R/3 4.6C
We have a service PO, for which an error Combination of GR/IR Control not allowed for External Services is being displayed.
The PO is in error in process at this moment. And is not in R/3
On SRM PO we have Confirm Performance of Service/Goods Receipt checked and Invoice Expected checked.
Confirmation-Related Invoice Verification is not checked. Any thoughts on this!!
Thanks
KrishnaHi
<u>Please go through the following SAP OSS Notes -></u>
Note 725824 - MB5S: Error with purchase orders for external service
Note 781014 - Clearing values in purchase order currency are too high
Note 991800 - MB5S: Error in delivery costs (2)
Note 960789 - Wrong Values in MM Document for Service Based Invoice
Note 778562 - MM-IV: invoices are entered before the goods receipt
Note 578531 - Incorrect FM update for service purchase orders
Note 635864 - ME2S: Invoice value is calculated incorrectly
Note 570409 - Unplanned account assignment in invoice for service PO
Note 545684 - MIR4 for SRV: Incorrect data displayed if deletion indicator
Note 544567 - Transaction MIRO: incorr. default values at (parked) invoice
Do let me know.
Regards
- Atul -
SP Online Auth Error: Direct login to WLID is not allowed for this federated namespace
I receive the error "Direct login to WLID is not allowed for this federated namespace" when authenticating for Sharepoint online over https using code from: code.msdn.microsoft.com/windowsapps/Office-365-Create-Windows-5a88ccfc/view/SourceCode#content
Is there any setting on Sharepoint Online that is preventing successful authentication. The credentials passed are valid.
Thanks.No. SharePoint uses claims authentication for login by default. Since SharePoint doesn't recognize the source of connection you are trying to connect. Try using secure store from SharePoint online to add credentials of your windows app and then try
working it. Even if that doesn't work then try modifying the C sharp connection to SharePoint code.
If you find this information useful then please propose this as answer and vote.
Thanks.
Ujjwal Patel
|
SharePoint Online Support Engineer, MCPD, MCTS, MCAD.
Maybe you are looking for
-
Multiple users accessing the same server.
Ok here is my issue, about 2 months ago I started having issues with Filesharing on my 2012 Mac Mini running Lion server (current update). We have 3 users that VPN into our conpany network and usually access the same folder, 2 months ago they started
-
I am trying to click on a section in the accordion control but not able to... I am hand coding. The Accordion properties when I recorded are as below... When recorded it is clicking based on the points, #region Properties public HtmlDiv UISu
-
Payment block with spl gl indicator wise
Hi Experts after down payment request, that payment should block for payment, for this where can we do settings. regards venkat
-
Do I need to give my credit card info to apple in order to sign into their itunes store?
And why does Apple need my credit card info in order to set up an account for their itunes store?
-
Adobe Application Manager - updates cannot be installed
Dear guys, pls help me with the following problem: This message has appeared for a while now! THX! Robert