Error: Tax code P1 country IN does not exist in procedure TAXINN
Hi All,
here in our rollout project we are facing problem like...when i create PO & put some input taxcode in the invoice tab at item
level...The respective Taxes tab appears but when i click the same tab (taxes)....the next screen where Jmop, Jexc & other tax condition came doesnot appears...instead of that it remains on the same screen...
Also when i do FV11 t code for maintainance of Tax rates it goves me message like..
Tax code in procedure TAXINN is invalid
Message no. FICORE704
Diagnosis
The tax code entered is not defined in the country for this company code.
Similarly when i do MIRO after MIGO..it gives me error message like.....
"Tax code P1 country IN does not exist in procedure TAXINN
As i checked & found that P1 tax code exists in FTXP with the same TAXINN procedure with same IN country..plz suggest some sol for the same...
Thanks & regards,
Sandeep Sharma
HI,
Please do the configuration in the following node
SPRO > IMG > Logistics General > Tax on Goods Movements > India > Basic Settings > Maintain Company Code Settings > Determination of Excise duty > Condtion Based Excise Determination > Assign tax code to Company code
In this node assign the company code to the tax code which you have used in the Purchase Order.
Regards,
DilliB
Similar Messages
-
Error- "Tax code B0 country IN does not exist in procedure TAXINN"
Hi to All,
I'm working on a Import PO. While doing MIRO for planned delivery cost, I'm getting an error "Tax code B0 country IN does not exist in procedure TAXINN"
I've assigned the Tax code to company code, but still I'm not able to solve this problem. Could anybody tell me the areas in which I may have made the mistake?
Thanks & Regards,
PiyushHi Piyush
You assign your tax code to company code at IMG--> Logis General --> Tax on Goods Movemnt --> Basic Settings --> Calculation of excise duty -> Condition type excise determination --> Maintain Tax code to country code
If still problem is not resolved you maintain the all rates to 0 in FTXP of this Tax code.
Regard
Vivek
-- Reward if helpful !! -
Error: Tax cod OI country IN does not exist in procedure TAXINN
Hi all,
while posting invoice, i am facing an error
"Tax code OI country IN does not exist in procedure TAXINN"
I defined the tax code OI and assigned it to my company code XXX. I created Tax procedure TAXINN with three basic condition types (BASB, MWAS, MVBS). I assigned my tax procedure to the country IN.
I think i missed some thing in the configuration part. Please guide me.
Thanks!
PavanHi,
1. If tax is deducable in nature means if you are using CIN then assigm Tax code
SPRO --> logisctic General --> tax on goods movements --> india --> bacis setting --> determine of excise condition --> defaults excise conidtion
here assign tax code with company code .
2. If while doing miro you are getting Tax Code" VN" Instead of OI
then please check condition in FV11 for material/plant/vendor combination, may be this tax code system is fetching from there or some other combination you are maintaining.
You can use data base tables also for your Tax code if you know tax conditions used there
T Code : SE16
Table : A363
A358 Country/Plant/Ctrl code/Material
A357 Country/Plant/Ctrl code
A362 Country/NBM-NCM Code
A971 Tax Code
A359 Plant/Matl group
Hope Help u !
Regards,
Pardeep Malik -
Error: Tax code D1 country IN does not exist in procedure TAXINN
Hi
I am getting an erorr while doing MIRO: Tax code D1 country IN does not exist in procedure TAXINN. However, I have checked following T Codes to check the configuration:
OBCL
OBBG
OB40
FTXP
Still I am getting the same error. Can any one guide me if I missed any thing else.
Regards,
Prakashhi,
CHECK IT:
Use t.code: OBBG and country IN to ur procedure TAXINN ans save.
Now try ur tranction.
Also use t.code: OBCL and with ur company code assign details like % of tax rate ( input tax "Z1" u cretaed) and save.
Check in FTXK for tax code "Z1",the tax is input or nor and its %.
Regards,
Priyanka.P -
"Tax code V0 country IN does not exist in procedure TAXINN"
I am following , following sequence for import purchases :
1. PO on bond plant ( tax tab at inovice tab in PO : V0 )
2. Following conditions are planned delivery costs :
JCDB / JCV1 / JECV / ZEBC --> these condition values are entered manually
at PO.
3. When I am trying to enter invoice for Planned delivery costs at MIRO ,
the error appears : "Tax code V0 country IN does not exist in procedure TAXINN"
V0 ( V-ZERO) Tax Code is maintained has
been assigned to company code. This tax code works fine for local purchase , why
the system is not allowing it for import purchase ? I even tried to remove it from
Info record and OMR2 and OBCL , however no effect ? I am using TAXINN . Can anybody
advise ?Check whether condition table 003 i.e. Tax classification is there in your access sequence for your condition type JMOP or not?
If not then maintain/create the same in Acees sequence of JMOP.
Now in FV11, select condition JMOP, key combination should be 'Tax Classification' only.
Maintain Country 'IN', assign tax code V0 to V0.
Regards,
Piyush -
Error-Tax code VS country IN does not exist in procedure ZTAXIN
Dear friends, while doing posting with assigning service tax with tax code vs,
i'm getting the following error. Initially we posted with out any problem suddenly today i'm facing the problem. please suggest the solution......error message follows:
Tax code VS country IN does not exist in procedure ZTAXIN
Message no. FF713
Diagnosis
You entered a tax code which is not defined for the country of the company code to be posted to in the tax calculation procedure.
System response
Procedure
Check and, if necessary, correct the entryDear,
Check it in FTXP,whteher the Tax code has been maintained or not.
In FV11 also check that ,Whether u have maintaine d the Condition record or not.
Regards
Biswajit -
While doing MIRO, i am getting error:-Tax code V0 country IN does not exist
hi frds,
while doing miro. i am getting this error:-
pls correct me
Tax code V0 country IN does not exist in procedure TAXINN
Message no. FF713
Diagnosis
You entered a tax code which is not defined for the country of the company code to be posted to in the tax calculation procedure.
System Response
Procedure
Check and, if necessary, correct the entry.
Procedure for System Administration
If it is not an input error, check and possibly change the system settings.
To do this, choose Maintain entries (F5).
Check whether the company code is assigned to the correct country and whether the correct tax calculation procedure has been entered for the company code country.
Create a new tax code if necessary.
Caution:
Since it is possible that the tables in question are being updated at a different time on another computer, it can take a certain amount of time for the tax code to be on all local machines in client server architectures after saving the new code.
regards,
williamhi
go to ftxp choose tax code v0
here in first input field give 00
then select that field and click on gl acct tab
here mention a gl or go to ob40 and mention gl for the acct key of that field
try finding
Tax code country IN does not exist in procedure TAXINN
on SDN u will get many threads
Tax code XX country IN does not exist in procedure TAXINN (MIRO Error)
conclusion is u must get acct for at least one condition in the tax code
regards
kunal -
Tax code V0 country IN does not exist in procedure ZAXINN
Dear All,
The system is throwing the error Tax code V0 country IN does not exist in procedure ZAXINN while doing the MIRO:
Pls. note that the same problem has already been discussed in the forum & I have tried the same but we are stuck on the same point.
Someone has suggested to maintain Tax Code using FV11; What condition type do I need to maintain?
Also tell me whether we need to maintain NAVS : Non-Deductible Tax & JEXS : Taxes on the PO in the Import Pricing Procedure. One of our FI friends has suggested the add the same. Pls. guide.
One more problem
Would request to look into the following problem tooo..
Regards,
Pramod Kumar
Message no. FF713
Diagnosis
You entered a tax code which is not defined for the country of the company code to be posted to in the tax calculation procedure.
System Response
Procedure
Check and, if necessary, correct the entry.
Procedure for System Administration
If it is not an input error, check and possibly change the system settings.
To do this, choose Maintain entries (F5).
Check whether the company code is assigned to the correct country and whether the correct tax calculation procedure has been entered for the company code country.
Create a new tax code if necessary.
Caution:
Since it is possible that the tables in question are being updated at a different time on another computer, it can take a certain amount of time for the tax code to be on all local machines in client server architectures after saving the new code.Hi,
Once you make sure V0 is assigned to tax procedure ZAXINN, Counrty- India, also try:
In Txn: FV11, For the condition type- XXXX (You will get this in Txn: FTXP, against the tax type, you get the condition type OR in the PO-Item details- Invoice tab, next to field: Tax code, see the Tab-Taxes, click on it and will get the condition type) , maintain the country-IN, Tax code-V0 and the rate.
Hope this helps!
Regards,
Shilpa -
Tax code A0 country IN does not exist in procedure ZTAXIN-Message no. FF713
While posting customer invoice using output tax code A* for country IN, I get the following error message:
Tax code A0 country IN does not exist in procedure ZTAXIN
Message no. FF713
The tax procedure ZTAXIN is assigned to comp code, taxes are configured and everything seems to be fine. The procedure has been manually created (for service tax purposes) and I am wondering whether the procedure might be wrong. Or there are any other settings missing in customizing?
The input tax is working fine, the problem is related only when I use outout tax.
Does anybody have an idea what else could be checked?
Thanks,
MagdaHi
Go to IMG---->Financial Accounting--->Financial Accounting Global Settings>Tax on sales/purchases>posting--
>Assign tax codes for Non-Taxable transactions
TCode : OBCL
check for the A0 and V0 tax codes whether they are assigned or not.
this will solve your problem
Regards
Venkat -
Tax Code V0 Country IN does not exist in procedure ZTAXIN
Hi all,
While doing IV in Import Purchase scenario, while simulating, i 'm getting the following error.
Tax Code V0 Country IN does not exist in procedure ZTAXIN.
Can someone help me on this.
Thanks
AG..You can define the tax code for your country using the following menupath in customizing:
IMG>Financial Accounting>Financial Accounting Global Settings>Tax on Sales and Purchases>Calculation-->Define tax codes ........... in the next screen enter your country and then the tax code you wish to create and press enter. You would be then directed to another screen, where you would maintain the description and whether it is a Input tax or Output tax and then maintain the appropriate tax percentage and save.
Your country should also be assigned to a calculation procedure. You check the same using the same menupath as mentioned above: .............Tax on Sales and purchases>Basic Settings>Assign country to calculation procedure........In the next screen, enter the appropriate tax procedure for your country. Eg: for country IN, assign tax procedure as TAXIN and save.
Hope this helps.
Regards
SATYA -
Getting err msg "Tax code I1Country IN does not exist in procedure TAXINN"
Hi ,
I am getting error message in transaction FB60 during document posting. Everything is going very proper in development system
but after transport when I am testing in QE system it's giving below mentioned error message.
Please provide me your valuable suggestion.
Error:
Tax code I1Country IN does not exist in procedure TAXINN
With regards,
Pravinhi,
Please check this path
Financial A/c (new)Financial A/c Global settings(new)-> Tax on sales/purchase-> basic Settings> Assign Country to calculation procedure.
In this check for the country IN whether TAX INN is assigned.
If not -Assign this.
Then go to FTXP check the TAXCODE for TAXINN
G.Ganesh Kumar -
Tax code & country & does not exist in procedure & FF713 only in PRD
Hi Experts,
I have created a tax code w1 for CST and included in request also
When I trans ported in development in quality it has been worked properly
But now in the Production system it is showing the error as FF713
Tax code & country & does not exist in procedure &
Detailed message is
NA FF713
Short Text
Tax code & country & does not exist in procedure &
Diagnosis
You entered a tax code which is not defined for the country of the company code to be posted to in the tax calculation procedure.
System Response
Procedure
Check and, if necessary, correct the entry.
Procedure for System Administration
If it is not an input error, check and possibly change the system settings.
To do this, choose Maintain entries (F5).
Check whether the company code is assigned to the correct country and whether the correct tax calculation procedure has been entered for the company code country.
Create a new tax code if necessary.
Caution:
Since it is possible that the tables in question are being updated at a different time on another computer, it can take a certain amount of time for the tax code to be on all local machines in client server architectures after saving the new code.iam getting error as Balancing field "Business Area" in
line item 001 not filled .
If you define document splitting criteria based on Profit Center and if your billing document contains multiple line items with different profit center, this type of error will come.
To check this, Go to IMG Path -- Financial Accounting (New) --> General Ledger Accounting (New) --> Document Splitting --> Define Document Splitting Characteristics for General Ledger
There check whether the mandatory check box is selected for profit Center. So check in your billing document, whether any line item does not have profit center.
Last but not least, till your query is addressed, dont mark the thread as "Answered", as many members will skip your thread and you will miss getting their suggestions.
thanks
G. Lakshmipathi -
Error: Bank N.A. for country IN does not exist"
Hello Gurus,
When i am monitering Bdoc messages in Tcode:SMW01 ,there is an error message as"Bank N.A. for country IN does not exist"
So please help me to solve this problem.
Thnks in adv,
Divya.Hello Gregor ,
I didn't do Initial Download of the Customizing DNL_CUST_BNKA in Transaction R3AS.
Regards,
divya -
I am getting this error message "ORA-01006: bind variable does not exist.
My code works fine like this:
DECLARE
v_JOBTYPE varchar2(8);
v_STATUS varchar2(8);
v_FAILURE varchar2(8);
v_CAUSE varchar2(8);
v_ACTION varchar2(8);
BEGIN
SELECT EVT_STATUS, EVT_FAILURE, EVT_CAUSE, EVT_ACTION, EVT_JOBTYPE
INTO v_STATUS, v_FAILURE, v_CAUSE, v_ACTION, v_JOBTYPE
FROM R5EVENTS WHERE ROWID = :ROWID;
IF NVL(v_STATUS, 'X') = 'C' AND NVL(v_JOBTYPE , 'X') IN ('BRKD','UNPLBRKD','FILTRA', 'LUB', 'FAC') AND (v_FAILURE IS NULL OR v_CAUSE IS NULL OR v_ACTION IS NULL) THEN
RAISE_APPLICATION_ERROR( -20001, 'FAILURE, CAUSE AND ACTION FIELDS MUST BE POPULATED');
END IF;
END;
But I want to change the code to include a record (ACT_TRADE) from another table(R5ACTIVITIES). I am getting this error message "ORA-01006: bind variable does not exist - POST-UPDATE 200Before Binding". Any help would be appreciated.
DECLARE
v_STATUS varchar2(8);
v_FAILURE varchar2(8);
v_CAUSE varchar2(8);
v_ACTION varchar2(8);
V_CODE varchar2(8);
V_EVENT varchar2(8);
V_TRADE varchar2(8);
BEGIN
SELECT R5EVENTS.EVT_STATUS, R5EVENTS.EVT_FAILURE, R5EVENTS.EVT_CAUSE, R5EVENTS.EVT_ACTION, R5EVENTS.EVT_CODE, R5ACTIVITIES.ACT_EVENT, R5ACTIVITIES.ACT_TRADE
INTO v_STATUS, v_FAILURE, v_CAUSE, v_ACTION, V_CODE, V_EVENT, V_TRADE
FROM R5EVENTS, R5ACTIVITIES WHERE V_CODE = :V_EVENT;
IF NVL(v_STATUS, 'X') = 'C' AND NVL(v_TRADE , 'X') IN ('MTM','MTL','MTMGT', 'FTM', 'FTL', 'FTMGT', 'R5') AND (v_FAILURE IS NULL OR v_CAUSE IS NULL OR v_ACTION IS NULL) THEN
RAISE_APPLICATION_ERROR( -20001, 'FAILURE, CAUSE AND ACTION FIELDS MUST BE POPULATED');
END IF;
END;Thank you for your responses. Your feedback was helpful. This is what I ended up doing for a solution:
DECLARE
v_JOBTYPE varchar2(8);
v_STATUS varchar2(8);
v_FAILURE varchar2(8);
v_CAUSE varchar2(8);
v_ACTION varchar2(8);
v_GROUP varchar2(30);
BEGIN
SELECT EVT_STATUS, EVT_FAILURE, EVT_CAUSE, EVT_ACTION, EVT_JOBTYPE, USR_GROUP
INTO v_STATUS, v_FAILURE, v_CAUSE, v_ACTION, v_JOBTYPE, v_GROUP
FROM R5EVENTS, R5USERS WHERE R5EVENTS.ROWID = :ROWID
AND USR_CODE = O7SESS.CUR_USER;
IF NVL(v_STATUS, 'X') = 'C' AND NVL(V_GROUP,'X') IN ('MTM','MTL','MTMGT','FTL','FTMGTS','PLANNER','DISPATCH','PMCOOR','R5') AND (v_FAILURE IS NULL OR v_CAUSE IS NULL OR v_ACTION IS NULL) THEN
RAISE_APPLICATION_ERROR( -20001, 'FAILURE, CAUSE AND ACTION FIELDS MUST BE POPULATED');
END IF;
END; -
Error TF10175 The FMS team project does not exist
We are using TFS and Visual Studio 2013. TFS was working fine for me. However we have to do some Java development and also wanted that code in source control in the project. I was the lucky one (or not) volunteered to head this up. I installed
Eclipse and the TFS plugin for Eclipse now I am unable to use Visual Studio 2013 and the Source Control explorer to open other .Net based pieces to the solution without getting the following error:
Error
TF10175: The FMS team project does not exist.
This only happens for me and since I installed the Eclipse TFS Plugin. I also get the error when I try to get the latest code. Is there an issue in using the TFS plugin for Eclipse and Visual Studios?
R. K. WaltersHi Walters,
Thanks for your post.
As you’re using TFS Eclipse, I moved this post to TFS Eclipse and Cross Platform forum for the better response.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.
Maybe you are looking for
-
Problem with synchronisation of component settings
Dear All, We have newly installed a new enviroment with Siebel 8.1.1.2 Public sector. Everything is running fine but I see one strange thing. Of the object managers the parameters differ from what I see in the GUI and in SRVRMGR. The values in the SR
-
GoTo - Jump to Target from Query to Web Interface
Hi Guru's, I'm trying to make a GoTo from a web query (sender) to a BPS web interface (as receiver). That's ok for the moment ! My problem is to pass the parameters from the query for example the CompanyCode to the dropdownlist of the web interface w
-
Include HTML page in an HTML page
I know how to do an include of an HTML page inside an ASP page, but I am basically trying to do the same thing with an HTML page - that is include HTML within HTML - but it doesn't seem to be working when I test in a browser. It displays fine in DW t
-
Double-click does not open Clip Trimmer
iMovie 10.0.5 Double-clicking a clip in the timeline ought to open the clip in the Clip Trimmer. Oddly, I think it once did for me. Only days ago perhaps. Now it just opens the Adjustments Bar. Instead, I must select Window > Show Clip Trimmer or use
-
Recently did an install with MSI 785GT-E63 Mobo CPU: AMD 64 X2 6000+ RAM: 2x 2Gig Kingston Harddrive: 2x 320Gig WD OS: Windows 7 (64bit) Graphic Card: On-board Computer Case: Cooler Master Elite 310 Problem is it worked good on start up, then next d