Error ( termination error : 8) when scheduling Process chain.
Hi Friends,
We are just configuring the BW system 3.5 ( Installing etc etc), I created a Process chain and trying to schedule it, I get the following Error.
" Job terminated with error code : 8" , when I check the details of the message I see this " Cannot schedule the job with Id : BW REMOTE". Is it something that the basis/ securtity has to set up for the BW guys , to schedule jobs.
Thanks,
Hi Smily,
The possible reason for that error is the User type of the background user. Please check out OSS note 511475 which talks about this problem and possible solution. I have used this earlier.
You can see this for info on how to make the change:
/message/685940#685940 [original link is broken]
Hope this helps...
Similar Messages
-
GETWA_NOT_ASSIGNED error while running abap prog in process chain
Hi.
I am getting a runtime error GETWA_NOT_ASSIGNED while running an ABAP program in process chain.
But when i execute pro in SE38 , it's not giving any error.
Please any one can suggets what will be error.Hi,
i also used to get error for a program executed through process chain but when it is executed in se38 it used to work... that is because my program try to access a application server folder and reads the file from there... the authorisation to this is not proper through process chain ..... once authorisation to the folder was given properly .. i am able to run...
Such things can happen in your case also... Try to analyse the dump in st22.... what happened ...
Regards
vamsi -
How to put system info. in error mess. sent by email through process chains
When I get an error message by email from the process chain saying that the process bombed, it does not tell me from which SAP system the problem occured? (Whether Dev or QA or Prod). Is there a way to put the SAP system in the email along with the error from the process chain?
Thanks
RamHi Akshay,
I am in version 3.5. I believe you can do it in 7. We have a standard user id called ALEREMOTE coming from all 3 systems. We would ideally like the message to say ALEREMOTE - (the error message with DEV specified), ALEREMOTE - (the error message with QA specified) and ALEREMOTE - (the error message with PRD specified).
Thanks
Ram -
Error in delta run in the process chain
Hello Experts,
I have a delta infopackge that runs everyday , since many days the process chain is giving error at the IP.
The IP is red everyday and the following objects does not start, however when I check in the monitor the ip is completed successfully without any errors.
I checked the logs which is in greeen in the batch job , please find the details below.
Job started
Step 001 started (program RSPROCESS, variant &0000000111903, user ID ALEREMOTE)
Last delta upload not yet completed. Cancel
Data saved successfully
Start InfoPackage ZPAK_4EH1CYBST65PTYCQVFAQY6ZI7
Last delta upload not yet completed. Cancel
Last delta upload not yet completed. Cancel
InfoPackage ZPAK_4EH1CYBST65PTYCQVFAQY6ZI7 created request
Request REQU_4L001XOSR2IQQ14M90QLO1CTA could not be generated with InfoPackage REQU_4L001XOSR2IQQ14M90QLO1CTA without errors
Last delta upload not yet completed. Cancel
Error After Starting InfoPackage ZPAK_4EH1CYBST65PTYCQVFAQY6ZI7 in Process Chain ZIM_INT_ORDER
Entire chain now has status 'A'
Job finished
Could you please suggest.Hello
Thanks for your reply
the problem was with the way it was schudled, the chian was ticket at periodic run , as a result it as running automatically, and causing problem.
I have removed the periodic n saved it again ...the error stopped appearing !
The issue is resolved now.
Thanks for your help. -
Hi Gurus,
We are facing a short dump while scheduling process chains, as follows:
<BR><BR>
Runtime Errors UNCAUGHT_EXCEPTION
Exception CX_RSR_X_MESSAGE
<BR><BR>
Error analysis
An exception occurred which is explained in detail below.
The exception, which is assigned to class 'CX_RSR_X_MESSAGE', was not caught
and
therefore caused a runtime error.
The reason for the exception is:
No text available for this exception
<BR>
Information on where terminated
Termination occurred in the ABAP program "SAPLRRMS" - in "RRMS_X_MESSAGE".
The main program was "RSPC_MAINTAIN_SINGLE ".
In the source code you have the termination point in line 82
of the (Include) program "LRRMSU13".
<BR>
We tried to schedule it as a remote process chain from some other system it cancelled the job there with an ERROR_MESSAGE. We checked the RFC Connections at the source system side but it is working properly. We then tried to schedule the chain manually, we had this exception. Then we tried to have a look at previous logs of the process chain. It had this exception. We tried to reactivate the chain it was successful but when tried to schedule the chain same issue again. We tried to run the Meta chains under the same chain separately. They too gave us the same exception.
Please help.
Regards,
Sourabh DeoS Simran wrote:
Hi,
>
> Ours is a fresh installation..
>
> When i am loading for the first time till PSA it is successful..
>
> As HR data sources are 3.5 datasources, i am loading cube via infopackage..
>
> When i start the load to cube it is giving me dump with exception CX_RSR_X_MESSAG.
>
> i checked note 615389 which talks about "buffering of number range object BIM9999998". the 0REQID is not buffered, but it does not throw any error msg in RSRV to correct the error..
>
> and one more note 1157796 which talks about patches with version BI 7.0.
>
> Now we are in BI 730 with heighest level 0005.
>
> Not sure how to solve this error
>
> Any ideas?
What's your SP? Are you having any master data updates left unattended? Check the Master data objects, check the flows. Related SAP Notes : 914304 / Check 967202(SP10) and 998673(SP11), 1157796, 763203 and 615389
Edited by: Arun Bala G on Feb 12, 2012 9:50 PM -
Send sms when bi process chain failed
Hi SAP Gurus,
Is some one inform me how is it possible to send an SMS when a process chain failed ?
Is there a possibility to paramter something on the SAP BI system to execute this action ?
ThanksHi,
I dont think there is an SMS option . But an email can be send when a Process chain gets failed. The detail step for this is
1. go to ALRTCATDEF
2. select classification "Process Chains"
3. click on display/change
4. double-click on "error in a process of a process chain"
5. click on "fixed recipients"
6. write in your username (you have to maintain your e-mail address in SU01 for that to work)
7. save
8. In RSPC, take the required process chain
9. go into edit mode
10. from the menu, select Process chain -> attributes -> alerting
11. check "send alerts if errors occur"
Regards
Lekshmi -
Modifiying, Transporting and Scheduling Process Chain
Hello ALL,
i have to create a new process chain for a delta Load and put this process chain in a big existing Meta Chain, after i have to transport to Quality System.
if i control the difference between Dev and Quality system to have an idea i see that the Infopackages in Dev have the execution tab: Load Data Immediately without job: BI_BTCH
in Quality some Infopackages have execution tab: run successively in batch with job like this:
BI_BTCH LX6CW08S1ICM04I4O06KOPL
can you tell me please in detail how should i complete this activity:
- wich type of control should i do before creating and modifiying process chain in DEV and Quality
- how should i do to control in Quality the scheduling of a process chain
- if i modify a process chain in DEV and after i will transport in Quality what will be the affect in Scheduling, the scheduling will be the same without problem or i have to schedule again
- in generale how can i schedule a process chain, wich transaction and how in detail
Thanks a lot for your help
BilalHi Bilal,
1) EVENT: When you want to have a process chain 'A' to be started after completion of a process chain 'B' or any process in process chain 'B' we can use this event. These two chains can also be from different BI systems. Like Chain 'A' could be from one production system and Chain 'B' could be from different production system. As soon as the chain A finished an event will be triggered and this event will trigger the chain B. The start time of chain B might differ because it depends on the completion of chain A. To schedule a process chain using an event, Go to Tcode: RSPC look for your chain. Switch to change mode. Right click on the start variant and select maintain variant. Click on "change selections. click on "after event," give the event name in the slot and select the periodic job.
2) RUN JOB PERIODICALLY: When you want to have the chain run for more than once periodically we select this option. Suppose, chain B has to run after completion of chain A periodically we have to use this option. If you do not check this option, your chain B will run only once when the event is triggered after completion of Chain A. From the next time onwards, it not run even the event is triggered.
3) JOB: For every process when it runs a job will be created assainging it to a work process in the system. Similarly, when the chain starts a job will be created containing the log of the run. Also, in the scheduling options of a process chain, you can have your process chain started after completion of a particular job in the system (ex: an attribute change). For this, Go to Tcode: RSPC look for your chain. Switch to change mode. Right click on the start variant and select maintain variant. Click on "change selections. click on "after job" give the job name in the slot and save the settings.
4) SCHEDULING PROCESS CHAIN: Means to make settings to a process chain so that it will run on a periodic basis at a certain time. If you want to start a chain immediately, you will choose the option immediately and trigger it. It will run for only once. But, if you want to have your chain run everyday at 7:00 am in the morning, you have to schedule it using the scheduling options as below:
In Tcode: RSPC look for your chain. Switch to change mode. Right click on the start variant and select maintain variant. Click on "change selections." Click on Date/Time button. Give the start date and time in the Scheduled Start slots. (Ex: 09-04-2009, 7:00, to have the chain run at 7:00 everyday starting from tomorrow). Tick the check box Periodic job in the bottom and click on "periodic values" button and select the option as daily and save it. Then click on "Restrictions" button to specify the factory calander. The Tcode for calander is SCAL, where you can see all the factory calanders in the system and you can choose that suits your requirement. Save the changes and navigate back to process chain maintaince screen and click on "Schedule" button.
Now your chain is automated for trigger -
Sending mail to GROUP ID when a process chain fails.
Hi All,
Can one suggest me, how to send a failure/success mail to a Group mial id when a process chain fails.
I am awere about sending mails to individual mail id's when a any process fails or succed. I want to know the group ID creation part & how to tag the same SOCT.
Thanks in advance.
BR,
Kiron.hi,
The Distribution List/Group_id is created in SO23 transaction.
hope it is helpful to u
thanks -
How to schedule Process chains in Bi Admin Cockpit
Hello friens,
I am working on installing Bi cockpit.
After installing the info providers, i have to schedule the process chains for Bi admin Cockpit.
I know the transaction is RSPC.
But I dont know how to schedule process chains for Bi admin cockpit.
How to schedule Init and Delta
If you can send me step by step documents.
Or any good sap note number.
Or any good links i will really apreciate it.
I want to schedule process chains
Content Master Data
Data Load Statistics # Delta
Data Load Statistics # Init
Query Runtime Statistics # Delta
Query Runtime Statistics # Init
System Master Data
Please adviseHi,
Please check out this document:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8da0cd90-0201-0010-2d9a-abab69f10045
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/36693695-0501-0010-698a-a015c6aac9e1
Hope it helps.
Thanks
Mona -
Scheduling process chain in 1st and last of the month
Hello ,
Can some one help in scheduling the process chain at the starting of the month and the end of the month ?
The chain has to start on 1 st and 28th of every month.
Help me with the informations please!
Points will be assigned!
Thanks in Advance
Ram!Have your process chain to start "After event". Then create an ABAP program to call function module BP_EVENT_RAISE. There are numerous postings in this forum on how to do this.
Next create two monthly jobs (one scheduled on the 1st and the other on the 28th) using SM36, and the only step in the job is to call the program to trigger (raise) the event. By triggering the event, your process chain will execute.
Check these links:
Re: scheduling process chain 3 specific times a day -
Error in scheduling Process Chain.
Hi Experts,
I am creating process chains, but at the time of scheduling it is giving folloeing massage.
Job BI_PROCESS_LOADING could not be scheduled. Termination with returncode 8
Message no. RSPC065
Diagnosis
Program RSPROCESS is to be scheduled as job BI_PROCESS_LOADING under user ALEREMOTE.
System response
Scheduling terminated with return code 8. The meanings of the return codes are as follows:
SY-SUBRC = 4:
Scheduling terminated by user
SY-SUBRC = 8:
Error when scheduling job (JOB_SUBMIT)
SY-SUBRC = 12:
Error in internal number assignment
But I have Authorisation for scheduling Back ground jobs.
Please Help me,
Thanks in advance,
Raghav.Hi........
This problem is already discussed in SDN........Search in Forum......
Check SAP Note : 947690 for error RSPC065
and SAP Note : 511475
Also check the solution of Roberto Negro .......
/message/685875#685875 [original link is broken]
Hope this helps......
Regards,
Debjani....... -
Error occured when starting process chain
When we want to start a process chain via SAP_BW_ProcessChainRun we get the following error log:
Failed to start process chain /NSN/C_DSP_TR_GLOBAL_II. No logid was returned by the BW-SCH API.
com.redwood.scheduler.connector.sap.rfc.connection.exception.SapBapiException: BAPI exception while calling RSPC_API_CHAIN_START: E RSPC 022 Processes with Error
BAPI exception while calling RSPC_API_CHAIN_START: E RSPC 022 Processes with Error
at com.redwood.scheduler.connector.sap.rfc.jco2.connection.impl.ClientConnectionImpl.checkBapiReturnCode(ClientConnectionImpl.java:789)
at com.redwood.scheduler.connector.sap.rfc.jco2.connection.impl.ClientConnectionImpl.handleRscpApiErrors(ClientConnectionImpl.java:808)
at com.redwood.scheduler.connector.sap.rfc.jco2.connection.impl.ClientConnectionImpl.call(ClientConnectionImpl.java:505)
at com.redwood.scheduler.connector.sap.rfc.connection.AbstractRfcConnection$4.doPerform(AbstractRfcConnection.java:296)
at com.redwood.scheduler.connector.sap.rfc.connection.RemoteFunctionCall.perform(RemoteFunctionCall.java:120)
at com.redwood.scheduler.connector.sap.rfc.connection.AbstractRfcConnection.perform(AbstractRfcConnection.java:461)
at com.redwood.scheduler.connector.sap.rfc.connection.AbstractRfcConnection.execute(AbstractRfcConnection.java:289)
at com.redwood.scheduler.connector.sap.rfc.jco2.connection.impl.SapFunctionModuleWrapper.execute(SapFunctionModuleWrapper.java:200)
at com.redwood.scheduler.connector.sap.rfc.jco.AbstractSapFunctionModule.execute(AbstractSapFunctionModule.java:109)
at com.redwood.scheduler.connector.sap.rfc.command.impl.BwProcessChainCommand.execute(BwProcessChainCommand.java:98)
at com.redwood.scheduler.connector.sap.rfc.command.AbstractXbpCommand.doExecute(AbstractXbpCommand.java:86)
at com.redwood.scheduler.connector.sap.rfc.command.AbstractCommand.execute(AbstractCommand.java:56)
at com.redwood.scheduler.connector.sap.rfc.service.operation.RunJobOperation.doWork(RunJobOperation.java:103)
at com.redwood.scheduler.connector.sap.rfc.service.SapJobWork.doWork(SapJobWork.java:38)
at com.redwood.scheduler.infrastructure.workqueue.Worker.run(Worker.java:74)
at java.lang.Thread.run(Thread.java:579)
What could be the reason?
Thanks
Br
GünterO.K. I can answer the question by myself: Is an authorisation issue. The rfc user who starts the PCs didn't have enough rights.
Br
Günter -
Invalid DataStore object name error when running process chain after EHP1
Hello,
We recently upgraded our BW Dev platform to NW7.01 EHP1 SP6. I noticed that the layout for "Delete PSA Request" process in the Process Chain has changed after the upgrade. We can no longer specify the actual PSA table to delete eg, /BIC/B0001645. Instead we need to specify the Datasource name and the Source System.
Now after the upgrade when I run one of my process chains, it fails at "Delete PSA Request" step with error message "Invalid DataStore object name /BIC/B0001645: Reason: No valid entry in table RSTS". This datasource is based on the flat file source system and the PSA table for this Datasource is /BIC/B0001653.
Unfortunately the process chain is picking up an older PSA table for this datasource and there is no way for me to specify the current PSA table name after this change in layout with EHP1 upgrade. Any suggestions on how to resolve this issue.
Many Thanks,
AlHi,
Please implement OSS 1345331.
If this does not help try the below steps:
1. Run the report 'RSAR_PSA_CLEANUP_DIRECTORY/_MS' in check mode for a
particular PSA table for finding the inconsistencies.
2. After that please analyze the logs and if there is any problems related to partition, you need to correct them using the report u2013
3. 'SAP_PSA_PARTNO_CORRECT' in repair mode for the
PSA tables. Run the report again after this
4. 'RSR_PSA_CLEANUP_DIRECTORY/_MS' in check mode to
double check that the invalid partitions are
corrected.
Once this is done you can execute the report
'RSR_PSA_CLEANUP_DIRECTORY/_MS' in repair mode.
-Vikram -
Error when run Process Chain via BPC NW
Hi Gurus,
I am implementing SAP BPC 7.5 NW in a customer and I´m facing the following error when try to run a process chain via Data Manager: "Failed to analyze instruction ,TAB,%TAB% ".
Here is the scenario: we created a process chain that will be able to capture values recorded in a BPC application, load them into an DSO (make some transformations there) and finally send those transformed values to an specific table at ECC. This process will be started after some simulations at BPC and, when the user ends its simulation, start this process chain via BPC; this process chain is named as PC_ECC.
We made a copy of /CPMB/DEFAULT_FORMULAS and named it PC_FORMULA and, before step /CPMB/CLEAR, I assigned my process chain PC_ECC.
So, at Data Manager, I add this process chain (PC_FORMULA) and in Advanced button, I put this statement:
INFO(%EQU%,=)
INFO(%TAB%,;)
TASK(PC_FORMULA,TAB,%TAB%)
TASK(PC_FORMULA,EQU,%EQU%)
TASK(PC_FORMULA,SUSER,%USER%)
TASK(PC_FORMULA,SAPPSET,%APPSET%)
TASK(PC_FORMULA,SAPP,%APP%)
//TASK(PC_FORMULA,LOGICFILENAME,DEFAULT.LGF)
//TASK(PC_FORMULA,REPLACEPARAM,TESTE3%EQU%%TESTE3%%TAB%ASARENT%EQU%%ASARENT%%TAB%SOURCE%EQU%%SOURCE%%TAB%TARGET%EQU%%TARGET%)
As we do not have any script logic to be executed, we commented the two last statements.
When we run this package via DM, it gives us the message error: "Failed to analyze instruction ,TAB,%TAB% "
Looking through SDN forum we found two posts similar to this issues:
But the suggestion to supress the statement TASK(PC_FORMULA,TAB,%TAB%) do not work; when we comment this statement, the message error gives us the message:"Failed to analyze instruction ,EQU,%EQU% "; when we comment the statement TASK(PC_FORMULA,EQU,%EQU%) and the previous (with TAB). the DM gives us the message: TASK(PC_FORMULA,SUSER,%SUSER%) and so on, until nothing has left to comment.
Anyone of you view or has some similar case of error?
Thanks in advance to you all
Best Regards
AdrianoHi Rich,
Thanks for your answer.
I checked the parameter at my process chain and it has a variant (/CPMB/DEFAULT_FORMULAS_LOGIC) with the parameters:
TAB
SUSER
SELECTION
SAPPSET
REPLACEPARAM
MEMBERSELECTION
LOGICFILENAME
EQU
So, when I put in the task PC_FORMULA, TAB, %TAB%, it will be able to be recognized by the task...and the other parameters too. And when I take one of them off the task instructions, the system complains.
Any other suggestion?
Once again, thanks..a.nd best regards
Adriano -
Error when collect process-chain
hi all,
When I collect the process-chain to transport in the transport-connection,an error occured in the below windows:
Object 'ATTRIBCHANEVEN_485MDFX3NYUF8PKGN9RSFATRD' (RSPV) of type 'Process Variants' is not available in version 'A'.
Could anybody help me?
The BI is 3.5 version
Best rgds!the system tip of the error as below:
Object 'ATTRIBCHANEVEN_485MDFX3NYUF8PKGN9RSFATRD' (RSPV) of type 'Process Variants' is not available in version 'A'
Message no. RSO252
Diagnosis
You wanted to generate an object with the name 'ATTRIBCHANEVEN_485MDFX3NYUF8PKGN9RSFATRD' (in transport request RSPV) of type 'Process Variants' (TLOGO). This is, however, not available in the BW Repository database. It does not exist in the requested version A. If the version is 'D' then it is possible that an error arose during the delivery or installation. If the version is 'A' then the Object was either not created or not activated.
System response
The object was not taken into account in the next stage of processing.
Maybe you are looking for
-
Conversion de Montos de Solpe a Pedido
Hola a Todos, soy nuevo en el foro. Tengo una situacion con las Solicitudes de Pedido (Requisiciones de Compra) ya que al crear el Pedido (Orden de Compra) no me transfiere el precio en la moneda que le indico desde la solicitud de pedido, sino que l
-
W540 stuck on ThinkPad splash screen
I've got W540 (32GB RAM, 500GB HDD) running Windows 7.1 64bit that is constantly getting stalled at the ThinkPad splash screen during powerup. It will often stall at the "ThinkPad" splash screen. Other times it will stall at the "ThinkPad" splash s
-
I just finished a Prores 422 (HQ) sequence in FCP 6 and everything looks great when I export to either H.264 or Quicktime Mov. However, when I compress the video to a WMV using Sorenson 4.5, the video quality is poor. Is anyone exporting for Windows
-
When I receive an email request for a meeting, when I open it I get an error message asking if I want to revert to server, try again or ignore. If I choice revert to server it deletes the event, if I choice ignore it accepts it but won't sync with my
-
How to get full screen as a default?
My display screen is half size. Each time I log on I have to go to view and then to presentation view to view full screen. Is there a way for it to default to full screen?