Error the actual price could not be determined while executing CKMLCP

Hi!
we are facing the problem while executing CMLCP, the error message is "The actual price for 10VN000012/MHR could not be determined" ( error message number CKMLLA102).
Our scenarios is as below:
we have 4 activity types out of which activity type "MHR" are used only for Indirect activity allocaiton tracing factor that means all service costs from service cost centres will be distributed to production cost centres in the ratio of actual quantity confirmed for MHR activity type.
for this activity type we will not have any actual cost distribution, so there will not be any actual cost for this activity type.
So, as actual quantity is confirmed during production process and while executing CMLCP is expecting actual price for the same ( we are executing KSII for actual activity price calculation before costing run). is there any enhancement to avoid this error, because our client don't want to allocate cost to this activity type.
regs,
ramesh

Hi Ramesh,
Message CKMLLA102 is standard system behaviour when the actual
price of an activity is zero because cost center accounting does not
allow actual prices to be zero.
Unfortunately the system can't distinguish an actual activity price
of zero from a not yet calculated activity price, so for activities
with actual price zero the message CKMLLA 102 is sent.
Have you check the SAP note 361379?. It provides you some options to overcome
the issue.
Best regards,
MLM

Similar Messages

Error:The grouping element could not be determined for project

Hi,
When I am trying to issue goods for a project,I am getting the following error
"The grouping element could not be determined for project 1., plant 2., and MRP group 3.."
what may be the reason for this reason.
Regards,
Raju

Hi,
You are using Automatic Requirement Grouping in your project and there is some issue with the Material Master,please check the Material Master Views.
Muzamil

The Organizational Data could not be determined. Inform system admin

Hello All,
I am able approve PO from EBP, but getting this error 'The Organizational Data could not be determined. Inform system admin' when trying to appove PO from Universal Work List (portal) or when I try to open the work item via Busines Workplace (SAP GUI). Can anybody tell me if there is any config missing? or any suggestions to resolve this issue.
Any kind of help appreciated and rewarded.
Thanks,
Shekar

Hi Chandra,
Please check the Purchasing Organization and Purchasing Group in PO if they are not populated then this error is triggered. Please also check the user settings whether Purchasing organization information is maintained or not.
Regards,
Ravi G

Error Log: The Billing Type Could Not Be Determined

Hi Experts
I have to produce the credit note sebsequent to the return. But I am getting the "Error Log: 0084001006 0000 The billing type could not be determined". Kindly help me with the solutions
Thanks and Regards
M.Dheerendar Jain

Hi,
Please check copy control VTFL for delivery and billing type
go through the routine 350 (VAT Determination) whteher it is applied in ite category.
if yes, then you have to configure the VAT Invoice type determination.
also maintain the entries in below tables:-
J_1IDCLSDET & J_1IBILDET
Even if the above entries are already maintained then check the supplying and receiving plant entries
for the billing.
To maintain entries in table go to t-code SM30.
and put the above table in the "Table/View" it helps to determine FVAT Invoice types
Invoice types determined based on supplying and receiving plant.
Kinldy check and confirm.
Thanks & Regards,
Rahul Verulkar

Alchemy for xfi - the product state could not be determined (error 6

as the title states I have xfi platinum & installed alchemy for xfi, tried to start it & I get "the product state could not be determined (error 60)" I click any of the links & it takes me to the buy page for the audigy alchemy. I've tried uninstalling & reinstalling multiple times, also uninstalled & reinstalled my xfi drivers. No change. I can enter anything into the entry field on the activation page & It'll advance me to the next page, then when it goes to connect to creative to register. I get another error. "an error occurred while attempting to connect to the internet. (00000)" I dont have anything blocked regarding this program & have tried with my firewall disabled. Please. Help

Well I didnt follow the link, but a kind person did download an update for Windows for me, if i can find link i will post it is from USA, took over 2 hours to install/update but appears to fix this problem, i now have all the bits that windows left out back on pc, so there is a solution out there, i know the site it came from there had been 80,000 downloads in over 2 days.

Trying to update creative cloud, comes error: The installation program could not access the important files / directories. Try to run the installer again. (Error code: 43), please contact customer support. The same error comes updating Muse. Mac 10.9.5. W

Trying to update creative cloud, comes error: The installation program could not access the important files / directories. Try to run the installer again. (Error code: 43), please contact customer support. The same error comes updating Muse. Mac 10.9.5. What shall I do?

Alauda_positos I would recommend reviewing your installation log files to determine the exact directory which the installer is unable to access. You can find details on how to locate and interpret your installation log files at Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html. You are welcome to post any specific errors discovered to this discussion.
For information on how to adjust file permissions please see Error "Exit 6" or "Exit 7" | Install log | Read, write, system file errors | CS5, CS5.5 - http://helpx.adobe.com/creative-suite/kb/error-exit-6-exit-7.html.

The billing type could not be determined" .

Hi All,
When i am excuting bap BAPI_BILLINGDOC_CREATEMULTIPLE i by passing ref_doc its giving error that "The billing type could not be determined" .
Is i have to pass something else.
Regards,

Can you tell how did you resolve this?
I'm getting the same situation and have no idea
Thanks in advance.

Jdbc thin error : The Network Adapter could not establish the connection

jdbc thin error : The Network Adapter could not establish the connection
I have been able to create a webservice as per the article Build a PL/SQL Web Service by jason price from otn website. while executing url to call the pl/sql procedure to get the data i am encountering this error
The Network Adapter could not establish the connection in the resultant xml output. Am I missing something here ?
Please see ouput below
<?xml version="1.0" encoding="UTF-8" ?>
- <SOAP-ENV:Envelope xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/">
- <SOAP-ENV:Body>
- <SOAP-ENV:Fault>
<faultcode>SOAP-ENV:Server.Exception:</faultcode>
<faultstring>java.sql.SQLException: Io exception: The Network Adapter could not establish the connection</faultstring>
<faultactor>/plsqlsample/dbfunc</faultactor>
</SOAP-ENV:Fault>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope
my oc4j/j2ee/home/config/data-sources.xml file has this entry for the connection
<data-source class="com.evermind.sql.DriverManagerDataSource" connection-driver="oracle.jdbc.driver.OracleDriver" ejb-location="jdbc/hr_connDS" inactivity-timeout="30" location="jdbc/hr_connCoreDS" name="jdev-connection:hr_conn" password="xxxx" pooled-location="jdbc/hr_connPooledDS" url="jdbc:oracle:thin:@o11idev.concentra.com:9200:DEV1" username="hr8" xa-location="jdbc/xa/hr_connXADS"/>
I am not able to debug this error and any information to debug this error would be appreciated. I have scanned the metalink short of logging a tar. I am using the oc4j install on the 9ias webserver and not the jdeveloper/oc4j combination. The apps server runs 9ias on hp/ux.
Thanks
ashok

Ashok,
Your database connection URL doesn't look right to me. The default database connection listener port is 1521 (not 9200). You can check this using the "lsnrctl" utility.
To find the "host" and SID parts (of the URL), use the following SQL query:
select HOST_NAME, INSTANCE_NAME from V$INSTANCEGood Luck,
Avi.

Cannot upgrade my ipod touch to iOS5.1 - error:"the network connection could not be established" Although I can access the itunes store.

Cannot upgrade my ipod touch to iOS5.1 - error:"the network connection could not be established" Although I can access the itunes store.
Running Mac OS 10.7.3 using itunes 10.6
unplugged other USB devices, disabled security, restarted computer. Next?

Try changing the DNS as described here:
iOS 5 update issues "Network...: Apple Support Communities

"The Destination Directory Could Not Be Determined For Photo Delluxe 4.0"

I Downloaded Adobes Photoshop from thier Site.
When trying to install pdx401upus.exe,
it will open up the Installation Wizard and then I get the Following "Warning" Message....
"The Destination Directory Could Not Be Determined For Photo Delluxe 4.0"
it just gives me a box to check that says "OK", and then the Wizard Shuts down.
Im running an HP Computer with Windows 7, Tons of HD Space, Ram, Memory ect.
I love using Adobe Photoshop, but since I got this new computer,
my Adobe Photoshop install disc seemed to be too old (Windows 95),
and therefore would not load to my new Computer/Operating System.
Any pointers, Websites, Instructions would be greatly appreciated.
Although I'm not a "Computer Dummy" I know just enough to get me into trouble, so the simpler the instructions....the better.

I am sorry Wwotr but I have not observed a user who has successfully installed and used Photo Deluxe on Windows 7. Since Photo Deluxe we have released 10 versions of Photoshop Elements. I would recommend utilizing the trial of Photoshop Elements 10 and seeing if that will fullfill your needs. You can find more information at http://www.adobe.com/products/photoshop-elements.html.

Exchange 2010 - The certificate status could not be determined because the revocation check failed.

I have tried everything I have found online to get my DigiCert to work.
I have exported the cert and imported it into my child domains and they look perfect.
It is just my parent domain having issues.
netsh winhttp show proxy
does show my correct proxy server for http and https and port 8080
I have tried name, FQDN and IP address.
In the Bypass-list I have tried none, *.domain.com, and a list of all domains and child domains in my forest.
I have flushed the cache
certutil -urlcache crl delete
certutil -urlcache ocsp delete
and rebooted the Exchange 2010 (Windows 2008 R2) server
No matter what, I still see in my Server Configuration for the parent domain's DigiCert cert the message
The certificate status could not be determined because the revocation check failed.
with a red X on the left hand icon. Again, Child domains all say "The certificate is valid for Exchange Server usage."
Note: In spite of having the red X, I was able to assign via EMS the services.
Webmail works fine. Outlook Anywhere fails... I suspect it is due to my red X problem.
Suggestions?
Thanks in Advance
Jim.
Jim.

I have contacted DigiCert and they said the cert is working per their utility, hence the problem is outside the scope of their support.
I have followed, several times, http://support.microsoft.com/kb/979694
http://www.digicert.com/help/ reports all is well.
The DigiCertUtil.exe reports all is well and happy.
I have run
netsh winhttp set proxy proxy-server="http=myproxy:8080;https=myproxy:8080" bypass-list="*.mydomain.com"
Current WinHTTP proxy settings:
Proxy Server(s) : http=myproxy:8080;https=myproxy:8080
Bypass List : *.mydomain.com
I have flushed the cache using the commands
certutil -urlcache crl delete
certutil -urlcache ocsp delete
I still see in my Server Configuration for the parent domain's DigiCert cert the message
"The certificate status could not be determined because the revocation check failed."
with a red X on the left hand certificate icon.
To verify the cert via command line:
certutil -verify -urlfetch c:\mail_domain_com.cer
LoadCert(Cert) returned ASN1 bad tag value met. 0x8009310b (ASN: 267)
CertUtil: -verify command FAILED: 0x8009310b (ASN: 267)
CertUtil: ASN1 bad tag value met.
I suspect this is why I cannot get Outlook Anywhere to connect.
Child domains show a happy certificate icon. Parent domain does not.
Still scratching my head.
Thanks all!
Jim.

When I try to import pictures from media card to iPhoto, I'm getting the error 'The following file could not be imported. The file is in an unrecognized format.' The file is a jpeg and I've never had this problem before.

When I try to import pictures from media card to iPhoto, I'm getting the error 'The following file could not be imported. The file is in an unrecognized format.' The file is a jpeg and I've never had this problem before.

What version of iPhoto?
What colour profile is the shot?
As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?

Error :the specified module could not be found --oci.dll : Oracle9i

hi ,
i m trying to connect thru my java code to the oracle on my system ,while creating the DSN it gives the error
"the specified module could not be found" for the file oci.dll.
earlier it was not able to look for the sqresus.dll which i copied to the winnt/system directory , and after this oci error is coming , anyone knowing it please guide
with regards,

Make sure it is the same version of 9i (i.e. 9.0.x or 9.2.x) for both OO4O and ODBC. Also make sure that the ORACE_BASE\ORACLE_HOME\BIN directory is in your search path AND last, check your windows directories and subdirectories for duplicate copies of OCI.DLL (or anywhere else on the PC for that matter). Sometimes MicroSoft will include one and it is usually an OLD one.

Error: The specified procedure could not be found

Apparently the password expired on my Windows 7 BETA installation. Upon restart the system notifies me and asks for a new password. After confirming the password I get the error:
"The specified procedure could not be found"
I cannot log in at this point. The old password won't let me in and I can't change it. The administrator account I found is disabled by default.
Is there any way to log in?

Okay, here is your dilemma.
You cannot login to your only account and the local administrator account is in its default disabled mode.
There is a solution, albeit totally unsupported. Go to http://www.sysresccd.org/Main_Page and download the latest SystemRescueCd. Burn a CD from the ISO. When you boot with the SystemRescue CD, you will type ntpass and hit <enter>. From there, make sure you read the screens. You will have make selections depending on how you loaded Windows 7 (clean vs. upgrade vs. dual boot, etc). Using this disk, you CAN enable the local administrator’s account and login in.
I just did the procedure using Windows 7, build 7000 with SystemRescueCd 1.1.6.
Good luck.

Error: The report source could not be retrieved from the state object.

I have been trying to create a report in a JSF page. The relevant parts are below:
Inside the JSP page, this is the code:
              <jsp:useBean id="MyBean" class="com.nm.facade.rto.POJOViewerBean" scope="session" />
                <jsp:setProperty name="MyBean" property="reportLocation" value="Report1.rpt" />
               <v:reportPageViewer reportSource="#{MyBean.reportSource}"
                                       displayToolbarPrintButton="true"
                                       printMode="ActiveX"
                                       zoomPercentage="100"
                                       displayToolbarExportButton="true"
                                       displayToolbarRefreshButton="true"
                                       viewerName="My Viewer"
               ></v:reportPageViewer>
In the backing bean, this is the relevant code:
    public Object getReportSource() throws ReportSDKException
        if (propertiesChanged || reportSource == null)
            propertiesChanged = false;
            if (reportLocation == null)
                throw new RuntimeException("The reportLocation property must be set before a report source is retrieved");
            ReportClientDocument rcd = new ReportClientDocument();
            rcd.setReportAppServer(ReportClientDocument.inprocConnectionString);
            rcd.open(reportLocation, 0);
            DatabaseController dbc = rcd.getDatabaseController();
            //Create the POJO collection and populate it with data
            ReportData[] data =
              new ReportData("B.B.", "King", 6, new Date(25, 9, 16)),
                new ReportData("Muddy", "Waters", 7, new Date(15, 4, 4)),
                new ReportData("John Lee", "Hooker", 8, new Date(16, 8, 16)),
                new ReportData("Otis", "Rush", 9, new Date(34, 4, 29)),
                new ReportData("Buddy", "Guy", 10, new Date(36, 7, 30))
            //Create the result set from the collection of POJOs
            POJOResultSetFactory factory = new POJOResultSetFactory(ReportData.class);
            factory.setVerbose(true);
            POJOResultSet results = factory.createResultSet(data);
            ResultSetMetaData metaData = results.getMetaData();
            //Set the resultset as the report datasource
                  //Get the table name from the 'Set Datasource Location' dialog in the Crystal Reports designer
            String reportTable = "getReportDataDataSource";
            dbc.setDataSource(results, reportTable, reportTable);
            IReportSource reportSource = rcd.getReportSource();
            if (reportSource == null)
                throw new RuntimeException("Unable to get a report source.");
        return reportSource;
In the CRConfig.xml, this is what is there:
<?xml version="1.0" encoding="utf-8"?>
<CrystalReportEngine-configuration>
    <reportlocation>../reports</reportlocation>
    <timeout>0</timeout>
    <ExternalFunctionLibraryClassNames>
         <classname></classname>
    </ExternalFunctionLibraryClassNames>
</CrystalReportEngine-configuration>
The report template 'Report1.rpt' is packaged under WEB-INF/reports in the war file.
When I try to generate the report by accessing the JSF page, I am getting an error: "The report source could not be retrieved from the state object. "
I am not sure what is wrong. Can someone help me in resolving this issue?
Edited by: renshai on Jul 9, 2009 3:21 AM

My formatting gets lost and the message looks unintelligible. After some experimentation, I found that if the message exceeds some length, the formatting is removed. Since I couldn't find any way to delete this post, I made another post with the same subject. Please ignore this post and help me to find a solution for the problem posted in the other thread with the same subject. Thanks in advance.

Error the actual price could not be determined while executing CKMLCP

Similar Messages

Maybe you are looking for