Error: The Audio Device app not detected please h

Hi,
I seem to be having a problem with my audio device. I purchased a Dell Dimension XP and wanted to use the Creative Labs interface that came with the card I had purchased for my old computer. I put the Sound Blaster Audigy ZS Platinum in the new computer, installed the drivers and software but I can't seem to access some of the features on my surround mixer. For Example, I can't access Graphics Equalizer, EAX console and THX Console Setup.
I'm running Windows Media Center 2002.
Any solutions to this, I'm trying to record vocals but without the access of these features it's pointless to even use this card anymore.

Anyone?

Similar Messages

ERROR The Audio Device supported by this application is not detected. the application will ex

Sound is fine but I get error message every time I try to start any of the creative applications that come in mediasource like the graphic eq, speaker settings, surround mixer, EAX and THX consoles; the error: The Audio Device supported by this application is not detected. The application will exit.
I have read the forum notes on this error message and seems other have had this same issue, but I don't see any solutions...if anyone knows anything about solving this little mystery, please reply - need to get into that console to fully utilize this sound card.

AFTER AUTOUPDATE this problem began. I removed the audigy package and reinstalled everything from the factory CD and still get this message. This happens every time I update the audigy drivers and thx. I am tired of doing recoveries to get audigy to work. Too bad I keep forgetting that the updates cause this problem. Audigy Platinum 2 works fine wothout the update. I will never update again!
How can I resolve this problem short of a full recovery?

The audio device is not working in my brand new hp

I bought the pavilion f4j02la and after 10 days of using it, out of the blue, the sound speaker on the desk appeared with an "x" as if I had put mute on it. It appears to be no device no more and the automatic "help" that searchs for the problem and then fixes it, says that it can't fix anything and that probably one or more audio services are not being executed. It is still brand new.
So far i've tried downloading a bunch of new drivers, uninstalling the ones I already had, restarted the computer, erased evertything I had and try to set it back as when I just bought it... and this support hp is unreacheble.
I'm all the way to Germany where I just found out they are not in the market... so, if anyone has any idea how can I fix this I will really really appreciate it.
Thank u

HI @ireri_ireta
Welcome to the HP Forums!
It is a superb place to find answers and information!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I understand that you recently purchased this notebook and after 10 days you had no sound. You have tried downloading a bunch of new drivers, uninstalling the existing one and restarted the computer. Erased everything you had and tried to return it back to factory.
Here is a link to No Sound from Speakers (Windows 8) that may help.
Here is a link to Refresh Your PC to Resolve Problems (Windows 8) that will reinstall the OS but should not affect your personal settings or files.
Just to rule out hardware as the cause here is a link to Testing for Hardware Failures (Windows 8)
To return your notebook back to factory you can do a recovery. Performing an HP system recovery (Windows 8)
You will be presented the opportunity to backup your personal files to prevent data loss. If you have not yet done one it is an excellent time.
Restoring Files that were Backed Up Using HP Recovery Manager (Windows 8)
If you are still experiencing an issue please contact HP support for assistance. They can remotely access your system to aid with resolving issues.
Please call our technical support at 800 474 6836. If you live outside the US/Canada Region, please click the link below to get a support number for your region.
World Wide Phone Support
Best of Luck
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

USB Audio Device sometimes not detected. udev, maybe?

I am using an external usb audio device which I usually keep plugged into my machine. I am finding that this device is sometimes not being detected when I boot the computer.
When this happens, issuing the following command:
$ aplay -L
does not list this particular device. Plugging and unplugging the device does not seem to help.
What does seem to resolve the problem is unloading and then reloading the snd_sub_audio kernel module. This is done by issuing the following commands:
# rmmod snd_usb_audio
# modprobe snd_usb_audio
Could anyone give some insight as to why the usb audio device isn't being detected and why this only happen occasionally? Could this be a udev issue? The device in question is an M-Audio Fast Track Pro.

Make a "Genius" appointment at an Apple Store.
Back up all data on the internal drive(s) before you hand over your computer to anyone. If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
*An SSD doesn't need to be zeroed.

Audio device is not working, i have installed proper drivers, but audio device is not working

hi,
I have installed registery mechanic last week and made a system run in my laptop. After re starting my laptop, my audio devices are not working fine. I have installed the drives correctly and they are reflecting in program lists, how ever the audio device is not working. If I am reinstalled the system, My audio device is working fine, I have installed a fresh OS, but sitll its not working fine, could you help me to fix this one.

Tecra A8
Model No = PTA83L-04C02N
Can you please tell me from where I need driver so that my "Fn" key will be operation? Right now I tried to use "Fn" with F6 and F7 which suppose to change screen resolutions but nothing is happening.
Can you please tell me if I reinstall New OS (Windows XP - Sp2) then in which order which driver and Toshiba software I should install?
Hard to find XP drivers and utilities for that machine, Manoj. But you're in luck because the Asian part-number family PTA83L corresponds to the European PTA83E.
Go to the European download site and look up the Tecra A8 with Short Model No. PTA83E. You'll find 40 XP drivers, utilities, and BIOS updates.
Install the Chip Set Utility first, then the Display Driver, and then the other major drivers. Install the Common Module prior to Toshiba utilities and other programs.
Good luck!
-Jerry

HT3669 iEPP, Easy Photo Print, App not 'detecting' my Canon MX870 printer/scanner.

Downloaded the iPod Touch iEPP Airprint app for printing wirelessly to my approved, Canon MX870 printer/scanner and the app can't detect it.
Thanks

I have been having the same issue with the Canon iEPP app not detecting the printer using an iPhone 4S, 5S and iPad Air. I was on the phone with Canon IT support and the devices and apps can communicate with the printer when I type in the printer IP address in the Safari browser.
I have Comcast Xfinity for interner and have a Linksys Wireless-G router.
I tried about 5 different free app which support my Canon MX870 printer and none can detect the printer.
Any suggestions?

My problem is that one of the USB ports and the device does not detect this and inactive but can not find how to reactivate.Help me please! greetings thanks!

Hello good evening, I have a MacBook Pro and my problem is that one of the USB ports and the device does not detect this and inactive but can not find how to reactivate.
Help me please! greetings thanks!

Do you have the Firefox new tab page but the actual sites are missing, or do you have some other page?
If you have some different page, try the quick fix in Fred McD's reply.
If the sites are missing, did you use the Reset feature? That will clear the storage associated with the new tab page. I'm not sure it's possible to recover from that; you probably need to rebuild your page from scratch as you browse.
For possible future reference, here is how to access the hidden setting for the page to display on new tabs:
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the search box above the list, type or paste '''newtab''' and pause while the list is filtered
(3) Double-click the '''browser.newtab.url''' preference and enter your preferred page:
* ''Page thumbnails (default)'' => about:newtab
* ''Blank tab'' => about:blank
* ''Built-in Firefox home page'' => about:home
* ''Any other page'' => full URL to the page
Press Ctrl+t to open a new tab and verify that it worked. Fixed?
Some gotchas:
''If Firefox won't let you edit this setting:'' you may have something called SearchProtect on your system.
''If Firefox lets you save your change but ignores it:'' one of your extensions may be overriding it. You can review, disable, and/or remove extensions on the add-ons page:
"3-bar" menu button (or Tools menu) > Add-ons > ''in the left column click'' Extensions
''If the change works during your session, but at the next startup is back to an unwanted page:'' you might have a user.js file in your personal Firefox settings folder (your Firefox profile folder). This article describes how to track down and remove the file: [[How to fix preferences that won't save]].
Any luck?

Error "Sorry your device does not meet the system requirements that are needed to support Twitter for BlackBerry Smartphones"

I have a Curve 8300. With OS v4.5.0.81. And I am on a BB Social network plan through my cell providor "Fido".
I mainly use it for Facebook & Twitter and have no problems using either app. However I was prompted for an update for my twitter recently but wasn't near a wifi spot to update. Just decided to update today at home where I do have wifi. However when I go to do the update, it gives me the following error:
"Sorry your device does not meet the system requirements that are needed to support Twitter for BlackBerry Smartphones"
I have scoured for answers but haven't had much luck. I tried checking for OS updates. I apparently have the most current one that my phone will support. I uninstalled twitter and then tried to reinstall it via the twitter Icon on my phone. Got the same error. Tried reinstalling it through app world, it installed just fine. However it installed the version that I had previously had. So I went to twitter's settings and checked for updates. It prompted for one as I expected it would. And when I tried to get the update. It gave me that error again. I can use twitter as it is, but I don't see why my phone shouldn't be able to get all the updates for various apps. Is it a software compatability issue? Is it a hardware compatability issue? Is there anything I can do to get the update or do I just have a phone that won't take some app updates?

Hi and welcome to the forums!
The 8300 is not listed in the device upgrade table for Blackberry device OS v5.0. The newer versions of apps like Twitter and Facebook require device OS v5.0 to run correctly. Might be time to consider a new device!
Thanks,
Bifocals
BlackBerry Device Software 5.0 main support page
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Hi I recently dropped my ipod touch and now it wont connect to itunes. Everytime i plug it in, i get an error message saying that the usb device is not recognized

hi I recently dropped my ipod touch and now it wont connect to itunes. Everytime i plug it in, i get an error message saying that the usb device is not recognized

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

My iphone is no longer working I have black screen with a picture of the itunes logo and a USB cable. When I try to connect my iphone to itunes the device is not detected, can anyone help me? I desperatley need my phone back

My iphone is no longer working I have black screen with a picture of the itunes logo and a USB cable. When I try to connect my iphone to itunes the device is not detected, can anyone help me? I desperatley need my phone back

I have had a 3GS for 2+ years. After upgrading to IOS 4 (now 4.3.5) I began having problems. In the past week, my screen went to the itunes logo and USB cable twice -- unprovoked -- just found it sitting there like that! I connected to itunes and it did restore from a backup but it is a major inconvenience. I am also searching for answers, but better back-up regularly!

Trying to update creative cloud, comes error: The installation program could not access the important files / directories. Try to run the installer again. (Error code: 43), please contact customer support. The same error comes updating Muse. Mac 10.9.5. W

Trying to update creative cloud, comes error: The installation program could not access the important files / directories. Try to run the installer again. (Error code: 43), please contact customer support. The same error comes updating Muse. Mac 10.9.5. What shall I do?

Alauda_positos I would recommend reviewing your installation log files to determine the exact directory which the installer is unable to access. You can find details on how to locate and interpret your installation log files at Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html. You are welcome to post any specific errors discovered to this discussion.
For information on how to adjust file permissions please see Error "Exit 6" or "Exit 7" | Install log | Read, write, system file errors | CS5, CS5.5 - http://helpx.adobe.com/creative-suite/kb/error-exit-6-exit-7.html.

I just got my a new iphone 4 from O2. i plugged in my phone to my computer(windows 7). itunes doesnt open automatically. when i opened the itunes,its still not detecting my phone. on the phone it only shows the cable and itunes logo. please help

I just got my a new iphone 4 from O2. i plugged in my phone to my computer(windows 7). itunes doesnt open automatically. when i opened the itunes,its still not detecting my phone. on the phone it only shows the cable and itunes logo. please help

Did you try to remove all Apple related software and reinstall iTunes again? Removing iTunes, QuickTime, and other software components for Windows Vista and 7

The operating system can not detect my wireless device!

Hi all,
I am using windows server 2008 for the operating system and lenovo 3000 G430 for the laptop. but the operating system can not detect wireless device, on devices manager always show the drivers for this device are not installed! i tired for find and search the right driver. anyone have same problem with me and have solving this problem? or at least has same equation the operating system and the laptop series.

The problem is you have 2008 server on your laptop. The only thing you really can do is try all the wireless drivers here http://consumersupport.lenovo.com/ot/en/driversdownloads/drivers_list.aspx?categoryid=486030
IT Specialist and Consultant
Lenovo Tablet Evangelist
Current Machines: IdeaCentre A300, ThinkPad Tablet, IdeaPad U410, and Yoga 3 Pro Touch
Deutsche Community Comunidad en Español
Lenovo - the latest in DOtabs, DOpads, DOcentre's, DOstations and DOservers!

I get an error message saying "system overload, the audio engine was not able to process all the required data in time (10011)

i get an error message saying "system overload, the audio engine was not able to process all the required data in time (10011)

The thing is, that error message has been appearing when playing/recording a track that was running perfectly a few minutes ago and nothing has changed!
That can mean, that your project is too ambitious for your Mac. Are you using many complicated automations on that track?
4GB memory is not much, when doing audio processing. GarageBand will need all memory it can get, or will be forced to continually swap pages to your disk, to free RAM, and that can cause this error.
When this error occurs, it is best to restart the computer. This will free your RAM. Close all other applications that are competing for memory, i.e. other multimedia applications, and Safari.
Also, make sure, that you have plenty of free disk space. Don't let the free disk space drop below 20G.
Where is your project located? On an external drive or your internal drive? If it is on an external drive, connect this drive directly, not daisy-chained, or move the project to your internal drive.
I got up to eat, came back and tried to continue but GarageBand shuts down and displays that message every time I try to run the song. I've also recently run songs with several more tracks than this one and they worked perfectly. Any tips?
Are your other projects, that worked perfectly, still working?

Self Test Error -50002, The specified device is not a valid device.

I'm just an IT guy that knows nothing about Labview or DAQ cards that has been given the task of setting up a lab.
System is Dell GX280 with Windows XP SP-2. The DAQ card being used is a NI PCI-6251. The software used is Labview 7.11 and NI-DAQ 7.4.
Labview loads the professor's VI files as expected but when you start the vi it returns the following error.
Error -200157 occurred at the Traditional NI-DAQ Compatibility VI:AI Group Config.vi-> DAQmx Create Channel(AT-Voltage-Basic).vi
Also when you enter the Measurement and Automation application and browse to the device and execute a self-test it returns the following error.
Error -50002 occurred at Self Test
Possible Reason(s):
The specified device is not a valid device. The Operation could be completed as specified.
My question is are these errors because there are no devices connected to the DAQ? The professor claims that if nothing is connected it should still function properly. So now I'm trying to figure out what is wrong and the professor is not the friendliest in the world. I have tried reinstalling Labview and NI-Daq several times now and no luck using two separate computers. I would appreciate any assistance.

Hi Rice IT,
Since you are new to using this whole DAQ thing, then I'll start with just the basics.
Make sure you have no NI Devices in your computer (if you do, remove them then begin).
Install LabVIEW.
Install the latest DAQ drivers for your system (for you it's NI-DAQmx Version 7.5 for Windows 2000/NT/XP).
Power down the computer and insert your DAQ board.
When Windows boots you should see the New Device Wizard. Have it search for and install the drivers.
Open Measurement and Automation Explorer (MAX) to test the device (Start > All Programs > National Instruments)
Go to My System > Devices and Interfaces > NI-DAQmx Devices, you should see your DAQ device.
Right-click on your device and click Self-Test. If the device passes it should be ready to use
If that causes an error right-click on the device and Reset Device.
Redo Step 8 and perform a Self-Test of the device
If the Self-Test still does not work, then the board could be
broken. Try to place the board in a different PCI slot, if other
boards are available then try to use a known working board in your
system. If you still have trouble contact Technical Support.
Now your device should be working. You can try to run a Test Panel and look at how your device performs.
You could also right click on Data Neighborhood in MAX and
Create New... DAQmx Task and try to make a more customized measurement.
Finally you can open an example in LabVIEW
Open LabVIEW > Open > Examples (or Help > Find
Examples) > Browse > Hardware Input and Output > DAQmx.
Choose an example that is similar to what type of operation you are
trying to perform.
Typically you will want to start with an example and then
build up from there. If not, then you will want to take a look at
this KB
If you run into any problems, first read thru what the error message is
and where it occurs. If that can't help you isolate the error,
then try searching ni.com for more information. If you can't find
anything there, then check the forums to see if somebody else has had a
similar fate. Finally if you cannot find any more information
contact NI's Technical Support.
Here are a few more resources that might help you with some of the basics:
Introduction to Data Acquisition
Learn 10 Functions in NI-DAQmx and Solve 80% of
Data Acquisition Applications
NI DAQmx FAQ
I hope you are able to get a better bearing of where you need to go from this information.
Regards,
Otis
Training and Certification
Product Support Engineer
National Instruments

Error: The Audio Device app not detected please h

Similar Messages

Maybe you are looking for