Error: "The entry 1111 is missing in table T043S"

Hello All,
While clearing a G\L account the below error was encountered:
"The entry 1111 is missing in table T043S"
1111 is company code,
However when I look at the table T043S, 1111 is there.
Could help me to figure out what might be the other cause of this error?
Thanks in advance!
Jhero

Hello,
In T043S and T043G (OBA3) you need to create two tolerance limits.
one tolerance limit with some name
second tolerance limit without any name (blank)
If you do not create tolerance limit blank then your tolerance is not going to work.
First create tolerance group blank for your company code, then copy that tolerance and give some name for your company code.
Hope it should solve your issue.
Regards,
Ravi

Similar Messages

The entry 1810 is missing in table T043S

hi ,
i am gettign the above eror in f-03 . clear g/l accounts, kindly help.
aslo waht is the diff between f-03 adn f.13 ( automatic clearing ), the compnay code is 1810
please let me know

Hi
Maintain - Tolerances for Groups of G/L Accounts
SPRO>FA>GLActg>Busi.tran>Open item cle>clearing dif>Tolerances for Groups of G/L Accounts
1810 100 100 99 99
VVR

The entry AGX is missing in table T030B

Hi all,
When i create new record in FB70, with SGL Ind Z, there is an error: The entry AGX is missing in table T030B.
How to fix this issue?
Thanks,
Quang,

Hi,
Please maintain values for AGX at transaction code OBXW. You need to maintain posting key for Customer item with special G/L indicator at AGX.
Path for transaction at SPRO:-
Financial Accounting ---> Accounts Receivable and Accounts Payable ---> Business Transactions ---> Outgoing Invoices/Credit Memos ---> Outgoing Invoices/Credit Memos - Enjoy ---> Define Posting Key for Outgoing Invoices/Credit Memos
Regards,
Anand Raichura
Edited by: Anand Raichura on May 14, 2010 11:55 AM

In table T159L the entry 1111 is missing

HI All,
When I tried to do Production Receipt with MB1C, I have got the below error.
in table T159L the entry 1111 is missing. (1111 is my plant)
Pls advice.
Niranjan

Hi Niranjan,
Please check in SPRO>Materials Management>Inventory Management and Physical Inventory>Plant Parameters.
I don't think that the Plant creation is missing in OX10, because message clearly says Plant 1111 does not exist in Table.. so it is clear that Plant is existing in OX10.
Regards,
SAPFICO
Edited by: SAPFICO on Mar 24, 2011 9:21 AM

While Manual BRS " missing in table T043S"---???

Hi All,
While i am doing Manual BRS FF67 following error is coming what is that and how to overcome
"The entry AM01 is missing in table T043S"
AM01 is my Company code here
i already assigned tolerance all the places where it required but still problem is coming
Regards,

Do you have the entry with AM01 in transaction OBA0?
Also check the below thread:-
[Re: Error: "The entry 1111 is missing in table T043S";
There should be and entry with blank tolerance group also.
Regards,
SDNer

The entry T017 is misssing in Table T052,Message No.F5100

Hi Experts,
While Posting Entry useing T-code-F-02 i'm getting below error
The entry T017 is missing in Table T052 and message No . F5100.
What could be the reason?
Kindly give valuable input.
Shriram.

Hi,
Once in production whether that payment termis available or not if it is there ,
Then change message control to warning & proceed.spro-- cross component application --Bankdirectory there you can change
regards,
Santosh kumar
Edited by: santosh kumar on Oct 22, 2009 1:25 PM

FB70_The entry 001 is missing in table TAB_FSKB

Hi,
    I create a company code, when I use FB70, enter company code、customer number、invoice and posting date, then click enter, a warning message will jump:
The entry 001   is missing in table TAB_FSKB
Message no. F5100
    If I change the company code to other one,everything is ok. So I think maybe something is wrong with the data related to company code.

HI
Plz go to OBY6 and check whether your company code is there are not. I dont think it is there. Even if it is there, see whether you have assigned the Chart of a/cs, fiscal year, document types, document no. ranges, field status grp.etc.
Plz assign points, if its helpful.
Regards
Rajaram

Error while creating cust In table T078D, the entry VD01 is missing...

Hi Gurus,
I am new to SAP and have just installed SAP 4.7 on my laptop. While creating customer master, a message displays In table T078D, the entry VD01 is missing, and even for XD01 the same message is displayed. Can you guysplease help me with this?
Thanks
Shiva

Hi,
this looks like some customizing records are missing in your installation.
Table T078D contains the transaction dependant field settings.
This is in relation with customizing transaction OB20
In that table, there should be at least 15 records with the corresponding table key
FD01
FD02
FD03
VD01
VD02
VD03
WR01
WR02
WR03
WR11
WR12
WR13
XD01
XD02
XD03
So, if you don't find why standard customizing records are not part of you installation, you may re-create such records with the above keys.
Please note that all fields that are not part of the key should at least contains '.' character for each digits of each fields.
eg: FAUSA is 40 digits long.
FAUSA = '........................................'
Hope this helps
Regards
Alain

F110 -In table T074U, the entry K is missing

Hi All,
I am trying to process an item with Sp.GL indicator through payment run F110. I am geting following error message in the proposal log
"In table T074U, the entry K is missing". This table gives me all the Sp. GL indicators with the relevant config value. And for the related Sp. GL indicator I have checked that entry K is defined in the table T074U for the relevant Sp. GL indicator.
In the Payment run config (FBZP) - All company codes. the relevant indicator is entered in the field "Special GL indicator to be paid". And I have checked that the relevant alternative recon account for this special indicator is defined correctly and the special indicator is not marked as noted item as well. So, I have no clue
Please let me know what is the solution.
Thanks
Ron

Hi
Configuration for the Sp Gl indicator is correct. And i am able to find out the reason for discussed error. Actually, a substitution was deleting the Sp. Gl indicator from the line item after the posting. So, when F110 was trying to do the payment it sees an item with Sp. GL posting key but was not able to find the Sp. GL indicator which got deleted before by the substituion. So, there was not a way to find the alternative recon account for posting for the payment run.
Thanks
Ranjit

Entry 001 is missing in table tab_fskb

Hi , I get a problem when I use t-code:fb70, the error message is "entry 001 is missing in table tab_fskb" , is tab_fskb a table ? I use se16 to view the table ,but there is no table named tab_fskb. who can give me some solution?
thanks a lot

Dear Victor,
Once you open a particular thread, after that why you don't follow it..?
Forget about awarding points to a helpful suggestion or closing a thread,you don't even reply when anybody starts showing interest in your question.
Yesterday you asked:
What should I pay attention to do a successful client copy ?
I do the remote client copy successfully , I see the message"remote client copy complete" in SCC3. but the developers say they can not do the post.
so , I want to have your advices about how to do a successful copy. what should I pay attention to.
And when I asked for certain information:
Please specify the following things to help us analyze your situation.
1. Your system landscape
2. Your source and target system while doing the remote client copy.
3. Also why you did client copy and more details about the problem that your developer is facing.
Then only we can guide you.
You didnt replied and again opening a new thread today
PS: What you expect from others..?..To share knowledge when you dont even follow your post and least bothered about answering certain doubt of various potential repliers.
Regards,
Ashutosh

MB01 is giving error:No entry for partner function '' in table TPAR

MB01 is giving below error when i am trying to trigger ALE idocs using output type 'ZWE2'
Error:'No entry for partner function '' in table TPAR'.
I am unable to find what could be the above error and how to rectify.
Any help in this regard would be appreciated.
Thanks!

There is a partner function code for which there is no configuration data in TPAR. What is the partner function? Can you find that and verify that it is correct, or correct it to a value that is configured in TPAR?

APO Bapi - ERROR - No entry found in transportation indicator table for fol

Hi
Experts .. need help on a APO bapi
Iam being doing BAPI for transportation lane to add new material through the bapi BAPI_TRLSRVAPS_SAVEMULTI
iam passing the following to BAPI
    Logical system
    model
and in tables .
    TRANSPORT_LANE
    TRANSPORT_LANEX
    PROD_PROCUREMENT
    PROD_PROCUREMENTX
    LOCATION_FROM    = '1010'.
    LOCTYPE_LOC_FROM = '1001'.
    LOCATION_TO =   '1101'.
    LOCTYPE_LOC_TO = '1001'.
the above data is common for passing all the four bapi tables and in
addition iam passing
prod-valfr = Converted value by passing to FM - IB_CONVERT_INTO_TIMESTAMP.
prod-valto = Converted value by passing to FM - IB_CONVERT_INTO_TIMESTAMP.
prod-product = material number.
AFter excuteing bapi iam getting an error
No entry found in transportation indicator table for following objects
the above error occured when passed the given data to bapi table - PROD_PROCUREMENT
if we pass the data to   PROD_PROCUREMENT and   PROD_PROCUREMENTX
then there is no error in table return of bapi but the data is not uploaded in transportation lane.
I will really appreciate if some guide me where iam wrong or some other solution for this .
Regards .
Thanks .

Hi,
I am writing bdc code for uploading changing inspection plan data using qp02 . I saw your post in sdn .I think you have solution .can you tell the solution .
Regards
Nandan.

Windows Server 2012 VSS error "The system writer is missing"

Hello All,
I have a HP server that I have just installed Server 2012 standard, SQL Server 2012 and Sharepoint 2013.
When I try to take bare metal backup I get the error: "The system writer is missing", I have tried the backup as the local admin and domain admin.
The backup will only work if I decide to back up C:, once I select "Bare Metal" or "System State" the backup fails.
I have tried this solution: http://technet.microsoft.com/en-us/library/cc734021.aspx but have not had any luck yet.
When I run the command "vssadmin list writers" I can not see "System Writer" listed.
How can I add/turn on the System Writer?

Hi,
The system writer fails due to the fact that the trusted installer & system accounts are missing permissions to files in the directory %windir%\winsxs\filemaps\.
To resolve this issue, please run the following commands from an administrative elevated Command Window:
CD c:\windows\system32
Takeown /f %windir%\winsxs\filemaps\* /a
icacls %windir%\winsxs\filemaps\*.* /grant "NT AUTHORITY\SYSTEM:(RX)"
icacls %windir%\winsxs\filemaps\*.* /grant "NT Service\trustedinstaller:(F)"
icacls %windir%\winsxs\filemaps\*.* /grant "BUILTIN\Users:(RX)"
For more information, please also refer to the following links:
Discussion Forum FAQ: VSS System Writer is missing.
http://social.technet.microsoft.com/Forums/en-US/winserverfiles/thread/0b1eb10a-d666-4f5e-b657-c93b1d754a7f
Failure during Windows Server 2008 System State Backup & System Writer Missing
http://blogs.technet.com/b/chrad/archive/2009/11/18/failure-during-windows-server-2008-system-state-backup-system-writer-missing.aspx
Regards,
Arthur Li
TechNet Community Support

Error "The entry is missing in T009" during PO creation

Hello expert,
I have created one new plant. Also assign with Company code and Purchasing Organization. Now when i am going to create Purchase Order, error message is showing "The entry is missing in T009"
Pls give resoluation asap.
Regards,
Nilesh

Hi Nilesh
See this error is coming because of youir fiscal year variant. There are many errors you can get apart from T009...like T009B,C.
You please consult your FI resource for this. You have to maintain Fiscal variant. As you have indicated that you maintained it..please cross check with FI resource. T.codes are OB27& OB37

Roxio Media error "the certificate file is missing or has been corrupted."

Hi, ive had my blackberry since earlier this year. I am now getting an error message when i try to open up media manager. I am getting an error which states: "the certificate file is missing or has been corrupted." can someone help me figure this one out???? Thanks

Hi and welcome to the forums!
See if this helps!
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01035760&lc=en&cc=us&dlc=&product=3435326
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Error: "The entry 1111 is missing in table T043S"

Similar Messages

Maybe you are looking for