Error The even-numbered length of the DEC field LC_SRV_DURATION can lead t

Hi Guys,
When I activate or generate Datasource '0CRM_SRV_PROCESS_H' it gives me following warning
'The even-numbered length of the DEC field LC_SRV_DURATION can lead to problems'.
Actually , the field LC_SRV_DURATION is type DEC and lenght 10,
I know this is only waring but still it is not allowing me to activate.
I have seen some threads regardin this , but none of them have solution .
Can you please throw some light on this ?
Thanks
Jimmy

Hi jimmy,
The reason for the error will be clear for you when you check the following link
http://help.sap.com/saphelp_nw2004s/helpdata/en/cf/21f2f2446011d189700000e8322d00/content.htm
And check your table if you put the even number for the decimal field.
With regards
Chandru

Similar Messages

"The even-numbered length of the DEC field I_DFZ_EX can lead to problems"

Hi All,
I am getting the following warning message while activating the PP datasources,
2LIS_04_P_MATNR
2LIS_04_P_ARBPL
Warning Message: "The even-numbered length of the DEC field I_DFZ_EX can lead to problems"
                               "The even-numbered length of the DEC field I_DLZ_EX can lead to problems"
                               "The even-numbered length of the DEC field S_DFZ_EX can lead to problems"
                               "The even-numbered length of the DEC field S_DLZ_EX can lead to problems"
Checked in SDN, but no answer.
Need your expert solution, to resolve.
With Regards,
Sekhar

Thank you Des, for immediate response.
But i have already gone through the Note.
As we are using ghe standard datasources, can you suggest which option should i use to resolve.
Solution
If the field is not manipulated in the customer exit or elsewhere, no
processing is required.
If you change the field, the following possible solutions are available:
1. You can make sure that the number of the characters does not
increase after the manipulation.
2. If you can change the extract structure of the DataSource without
affecting other scenarios (for example, if it was generated in
transaction RSO2), you can increase the length of the DEC field (or
CURR, QUAN) there to the next odd character (in the example above:
from DEC 4 on DEC 5).
3. If neither of these solutions are possible, you can use a customer
append that contains a relevant DEC field (or CURR, QUAN) with the
next highest odd length. This can be used for the result of the
calculations. This means that you do not have to manipulate the
previous field.
With Regards,
Sekhar

Leopard. Did a full restore from Time Machine. Now I can't access my other internal and external drives. I get the following error: The folder "Capture Video" can't be opened because you don't have permission to see its contents.

Leopard. Did a full restore from Time Machine. Now I can't access my other internal and external drives. I get the following error: The folder “Capture Video” can’t be opened because you don’t have permission to see its contents. I have repaired permissions pn the main harddrive. When I try too click on a disk I get the previously stated error. I can't even open up information to see what permission/access there is. It simply will not let me see the content. It shows the content of my main hard drive when I have clicked the other harddrive's name.

Solved:
sudo chflags 0 /Volumes/"FCP Time Machine BU"
sudo chown 0:80 /Volumes/"FCP Time Machine BU"
sudo chmod 775 /Volumes/"FCP Time Machine BU"
sudo chmod -N /Volumes/"FCP Time Machine BU"

[Application Update Error] - The element 'Field' in namespace 'urn:deployment-manifest-schema' cannot contain text.

Hello,
I developed a custom SharePoint 2013 Application (SharePoint hosted) and everything works fine. If I tried to update the application and I ran into the following error:
The element 'Field' in namespace 'urn:deployment-manifest-schema' cannot contain text. List
of possible elements expected: any element in namespace '##any'.
If I redeploy the application (without update, just a new instance) everything works fine. Only the update scenario throws the exception above.
I tried different things to solve that issue:
I recreated the feature
I checked all the custom field definitions, content types and lists inside the app.
I tried different O365 tenants and a SharePoint 2013 On Premise Development Server (Same problem on all systems)
Can anybody give me a tip to solve that problem?
Thanks in advance

Hi,
According to your description, when you try to update your SharePoint Hosted App, an error occurs.
To narrow down the issue, I would suggest you create a simple app without other components in it, deploy it and then update it to see if this error will still occur.
Once you get a workable app without the update issue, then you can add other customizations one after one in this app and perform the update. By doing this, it would
be easier to find out the root cause.
Anyway, you can take a look at the link below about updating app for more information:
http://msdn.microsoft.com/en-us/library/office/dn265910(v=office.15).aspx
Feel free to reply if there any progress.
Thanks
Patrick Liang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support,
contact [email protected]
Patrick Liang
TechNet Community Support

Can't open PDF file from iBook on MAC. error "The application "ACDSee Pro" can't be opened."

Can't open PDF file from iBook on MAC. error "The application “ACDSee Pro” can’t be opened."

Hi arewers,
Do you have Adobe Reader installed, by any chance? If so, are you aware if it was the PPC or Intel version which you installed? In any case, for the time being, have a quick look in 'HD/Library/Internet Plug-ins/' using Finder and see if there's an Adobe plugin lying around. If there is, try moving it out of the folder and restarting Safari.
Yang

In my MacBookPro OSX I get error The application "QuickTime Player" can't be opened -600

I get the message when I try to launch quicktime player in my macbook pro OSX
"The application “QuickTime Player” can’t be opened -600"
That did not happen before
OSX is uo to date

I get the message when I try to launch quicktime player in my macbook pro OSX
"The application “QuickTime Player” can’t be opened -600"
PROCESSES ERRORS
Error -600 = No eligible process with specified process serial number
This may explain what the problem is but not how to fix it.

Error : The input field contains prohibited characters (already deleted)

Hi,
While trying to generate depreciation (Tcode AFAB), after select the Time of Print (either spool or immediate printing) this error will be displayed - "The input field contains prohibited characters (already deleted)", no error number displayed and the character ### appear in Time of Print. I m not using any special characters and i was able to generate it before. Also the test run is successful.
Please guide why this error is appear and what is the resolution for it.
Thank you,
Amalina

Hi Amalina,
Please see note 382285 solution part.
Regards Bernhard

The dropdown menu in the banner should be behind the text fields.

Hi Andy,
In our Application we have three Menus...The problem we are facing in that when ever we move the cursor, a drop down list will appear.. which is covering the text fields...
The dropdown menu in the banner should be behind the text fields.
Can u pls help me in this...
anoo..

Hi Anoo,
(You can actually ask questions to everyone, not just me!)
Normally, dropdown menus are supposed to be on top of all other items, so the user can pick an option from the menu. In fact, usually the problem is that select lists in IE appear on top of menus, not the other way around!
What you may have to look in to is adding a z-index value to items. Have a look at: http://msdn.microsoft.com/en-us/library/ms531188(VS.85).aspx
z-indexes determine the order in which items appear when two or more occupy the same space on the page. The higher the number the nearer to the top that item is. You can use negative or positive numbers. So, if item A has a z-index of 1 and item B has a z-index of 2, then item B will appear on top of item A.
A z-index can be set as a style on your menus:
<........ style="z-index:-1".....>Andy

The form field arguments.image did not contain a file.

Hi there,
I'm getting a strange error with a simple file upload and I
can't figure it out for the life of me. It's odd, because old code
I have written before has worked fine in this area, and I really
honestly can't see where I am going wrong.
First the error:
The form field arguments.image did not contain a file.
The error occurred in
C:\ColdFusion8\wwwroot\red_roof_rentals\components\query.cfc: line
37
35 :
36 : 
37 : <cffile action="upload"
accept="image/jpg,image/jpeg,image/gif" filefield="arguments.image"
nameconflict="overwrite"
destination="#getDirectoryFromPath(getBaseTemplatePath())#\properties\">
38 : <cfset variables.image = "#file.ServerFile#" />
39 : <cfset variables.thumb = "thumb_#file.ServerFile#"
/>
I have researched this and found other people have had the
same problem - although please be aware that I do not beleive this
to be an issue with whatever version of CF I am running. I have
still not found an answer.
I have one template with my form called
"admin_create_property.cfm". When the form posts it invokes a CFC
method that uploads the file and inserts stuff into the database.
However, it dies at the file upload part with that bizzarre error.
There are only two files working in this:
admin_create_property.cfm
query.cfc
I will write the code out for these so you can see. Please
see attached code. Please note that I have taken out as much
irrelevant code as possible (html, doctypes etc etc).
Any help with this would be greatly appreciated as I am
absolutley stumped to be quite honest. I've heard people say it
could be any of the following:
1 - Need to use enctype="multipart/form-data" - which I DO
2 - cffile filefield can't contain ## - which it DOESN'T
3 - Inut type must be file - which it clearly is.
Please please help, I feel stupid asking about this but I
need you guys more than ever!
Kind regards and thanks in advance,
Mikey.

I don't get what you mean as this is what I am doing.
<cfinvokeargument name="image" value="#form.image#" />
This takes the value of the image file field and passes it to
the CFC as an argument.
Am I doing something wrong with this? Sorry for my
stupidness!
Thanks for you help, further assistance would be greatly
appreciated.
EDIT: Interestingly enough, if I just use the tag on my
"admin_create_property.cfm" page instead of using the CFC method
like this...
<cffile action="upload"
accept="image/jpg,image/jpeg,image/gif" filefield="form.image"
nameconflict="overwrite"
destination="#getDirectoryFromPath(getBaseTemplatePath())#\properties\">
It seems to upload the image just fine. Why then would this
not work if all I am doing is simply passing to the CFC the value
of the "form.image" as an argument so that the file upload can
happen in my CFC instead of in the calling template??!
It's really bizzarre.
Mikey.

The picklist field //BTCATEGORYFIRST/CAT01 has no valuehelp descriptor

Hello everyone,
We are freshly starting our development system for CRM7 Service.
I have configured Categorization Schemas for service request and I have the following dump :The picklist field //BTCATEGORYFIRST/CAT01 has no valuehelp descriptor.
I have read some OSS Notes about the error "The picklist field //BTCATEGORYFIRST/CAT05 has no valuehelp descriptor" but it cannot be applied to our system as category 01 exists in our service request view.
Furthermore, when creating service request in a standard business role (servicepro), the dump does not occurs.
It only occurs on our specific business role that we have copied from the servicepro.
Would anyone has a solution for this error?
Best regards,
Anaïs

Dear Samantak Chatterjee, Arjun Pawar,
I did look at the notes given, they are either not valid for our release or did not change the dump after implementing the steps.
We have created enhancements for the views and here are the details:
Composant name: SRQM_INCIDENT_H
Page: INCIDENTHEADEREF
Component usage: CRM_SRQMIncidentH
Object type: CRM_SRQM_INCIDENT
See below the screenshot of technics details for the process type view and then for the search view.
I am not sure the problem comes from Categorization as, for some other process type, we do not have any schemas linked but the dump still occurs.
I am going to log an OSS call and will provide with their information.
Best regards,
Anaïs

The application "COMSOL Installer" can't be opened.

Hi I'm trying to install comsol 5.0 from my university licence but when I try to run the Comsol installer it comes with this error "The application “COMSOL Installer” can’t be opened." do anyone know what to do im running yosemite if that could have anything to do with it

from console I get these messages don't know if that helps to spot the problem
16/03/15 15:58:32,562 com.apple.xpc.launchd[1]: (com.apple.xpc.launchd.oneshot.0x1000000a.ComsolLauncher[1202]) Could not find and/or execute program specified by service: 13: Permission denied: /Users/Rasmus/Downloads/COMSOL50_dvd/COMSOL Installer.app/Contents/MacOS/ComsolLauncher
16/03/15 15:58:32,562 Finder[208]: spawn_via_launchd() failed, errno=111 label=[0x0-0xdd0dd].com.comsol.comsol path=/Users/Rasmus/Downloads/COMSOL50_dvd/COMSOL Installer.app/Contents/MacOS/ComsolLauncher flags=1 : LaunchApplicationClient.cp #963 LaunchApplicationWithSpawnViaLaunchD() q=com.apple.root.default-qos
16/03/15 15:58:32,562 Finder[208]: spawn_via_launchd() failed, errno=111 label=[0x0-0xdd0dd].com.comsol.comsol path=/Users/Rasmus/Downloads/COMSOL50_dvd/COMSOL Installer.app/Contents/MacOS/ComsolLauncher flags=1

How to get the values from the input field of a table

Hello Friends
I am having table having one column as InputField and rest are the textview fields
I input the data and click the button that will add them to a node.
But what is happening is it is adding the current value to all the fields replacing other filelds.
Like suppose I am having 3 rows
In column I input 10
In column 2 input 20
In column 3 input 30
Now it is setting the value 30 to all the 3 fields.
Can any one tell me the code to set 10, 20 and 30 as different value in a node as entered by me.
Thanks

Hi
i am your scernario as follows
Context
TN_node (value node of cardinality 0:N)
             val1 (value attribute under value node)
             val2 (value attribute under value node)
i have binded Tn_node to table and val1 is textview and val2 is inputfield
public void wdDoInit()
    //@@begin wdDoInit()
    for(int i=0;i<5;i++)
    IPrivateTestView.ITN_nodeElement ele=wdContext.nodeTN_node().createTN_nodeElement();
    wdContext.nodeTN_node().addElement(ele);
    ele.setVa1("val"+i);
    //@@end
i have a button go in which printing all the values
public void onActionGo(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent )
    //@@begin onActionGo(ServerEvent)
    for(int j=0;j<wdContext.nodeTN_node().size();j++)
    //IPrivateTestView.ITN_nodeElement
    IPrivateTestView.ITN_nodeElement ele=wdContext.nodeTN_node().getTN_nodeElementAt(j);
wdComponentAPI.getMessageManager().reportSuccess("-----"+ele.getVa1());
wdComponentAPI.getMessageManager().reportSuccess("-----"+ele.getVa2());
Hope this helps,
If your problem is not solved please post your code like this
Thanks and Regards,
Arun

How can i assign value to the certain field in dynmic table ?

i have created a dynmic table .now i want to assign value to the certain field,how can i do that?
for eg,
<dyn_table> contains fields of name age ,now i want assign 'jack' to this internal talbe's field name ,

Hi,
try this:
FIELD-SYMBOLS: <GT_ITAB>      TYPE TABLE,
               <GS_ITAB>,
               <FS>, <FS1>.
DATA: GT_DATA   TYPE REF TO DATA.
DATA: GS_DATA   TYPE REF TO DATA.
START-OF-SELECTION.
CREATE DATA GT_DATA TYPE TABLE OF PA0002.
ASSIGN GT_DATA->*   TO <GT_ITAB>.
CREATE DATA GS_DATA    LIKE LINE OF <GT_ITAB>.
ASSIGN GS_DATA->*      TO <GS_ITAB>.
ASSIGN COMPONENT 'NACHN' OF STRUCTURE <GS_ITAB> TO <FS>.
<FS> = 'Smith'.
ASSIGN COMPONENT 'VORNA' OF STRUCTURE <GS_ITAB> TO <FS>.
<FS> = 'Paul'.
APPEND <GS_ITAB> TO <GT_ITAB>.
ASSIGN COMPONENT 'NACHN' OF STRUCTURE <GS_ITAB> TO <FS>.
<FS> = 'Jones'.
ASSIGN COMPONENT 'VORNA' OF STRUCTURE <GS_ITAB> TO <FS>.
<FS> = 'Martin'.
APPEND <GS_ITAB> TO <GT_ITAB>.
LOOP AT <GT_ITAB> INTO <GS_ITAB>.
    ASSIGN COMPONENT 'NACHN' OF STRUCTURE <GS_ITAB> TO <FS>.
    ASSIGN COMPONENT 'VORNA' OF STRUCTURE <GS_ITAB> TO <FS1>.
    WRITE: / <FS>, <FS1>.
ENDLOOP.
Regards, Dieter

How to get the extended field of an Extented Standard BO in Std Byd reports

Hi ,
Requirement :
Reflecting an extented field in of an extented BO in all the reports using this BO, or datasource based of this BO.
Explanation :
Suppose I have extented "customer" BO in my solution. the extention field is named as 'customer-ext1 ' having datatype 'text' (say).
Now I need to show this extented field 'customer-ext1' in all the Std Byd reports using / based on the customer BO.
Is this possible thru Byd Studio ( vers 3.0 / 2.6 ) ?
Can anyone help me out on this ?
I have found a statement from some where that -
" A key user can add an extension field to a data source that is based on the same business context as the extension field. This field can be then added to any reports based on the data source. This needs only key user adaptation."
I did not get the higlighted text in the above statement , can anyone help me figure this out ?

See as a test purpose,
I have extended "CustomerInvoice BO " with element "Extension1 " with datatype as test;
Now The solution's Key User is enabled.
I guess the Key user is my technical ID right , with which I enabled the Key user of my solution ? or is the Id which had created the solution ?
Post this, when I loggin to the system from web browzer, then go to adapt mode, a yellow bar strip named "Adaption Mode " appears..
Now what to do ?
Where shall i go and add the extended fields ?
can u pls expond the procedure... )
Thanks
Milin

Grey out the Time field in date assignment block

Hi All,
In my project we need to create a date profile in which i need a date rule to get today date and the time should be greyed out. i tried all day event but not working out for Zdate type. I tried different date types but Time field is not greyed out ( changing time to 00:00 is possible but client needs time to be empty)
With regards,
Selvam T

Hi Selvam,
as far I understand you want to define a certain date type as read only. There are several different ways to achieve your requirement:
date profile customizing: you can set the date as read only
I did not get your requirement of the time field, you can however play around with the following display customizing:
use BAdI CRM_APPOINTMENT_BADI to influence the appointment set
enhance the UI component, using the I-getter you can change a field to read only on UI level
I hope this helps.
best regards,
Johannes

Error The even-numbered length of the DEC field LC_SRV_DURATION can lead t

Similar Messages

Maybe you are looking for