Error: The file is either corrupt or using....
I am attempting to open a file I just did work on. I was saving periodically and closed the program properly. Now I am getting the error message:
C:\Users\ritterbenjamin\Documents\Adobe\Audition\5.0\shittests\shittests.sesx
Error: The file is either corrupt or using an unsupported format
Is there a fix to this? I tried opening it up in a word doc and that didnt even work to examine.
Unfortunately its sometimes difficult to recall some small detail which may have impacted.
I don't know how many times I've been asked to fix some PC problem and when you ask the person what happened between the time it was working last and now and invariably the answer is 'nothing'. Of course later you find that they had upgraded their OS, installed a new video card and a heap of cracked software or some other such events.
'Oh I didn't think that made any difference' LOL
I'm not saying this is the case with you but something has occured which is out of the norm otherwise every Audition user would have this problem every time they used Audition and that is certainly not the case.
In my case (this is a few years ago) I went through a period where I would get a crash more often than not - to the point I was hesitant to do too much.
I ended up writing a specific ses/sesx backup utility (http://www.mediasweeper.com.au/sesbackup.htm). Maybe use that before or after each session until confidence returns
The crashes BTW were caused by a rogue video driver and since then the only crash I have had has been due to a dodgy plugin
Bottom line is that any small detail you can offer will only go towards someone working out the cause.
So think of things like - were you accessing the session across a network, was there something different about this session or the files used, a new hard drive, or new software or hardware just installed, etc, etc
Also (and yes I know it is too late now) but any session which requires work spanning a number of days should always be backed up to at least one other location - most of us have been guilty of not doing that at least once
Similar Messages
-
I downloaded mountain lion and then the new office suite (word, ppt, excel) but now when I try to display one of my ppt's it says 'ppt cannot open the file...the file may be corrupt, in use, not a type recognized by ppt etc.." how can I fix it?? HELP
Did you try to open teh fle by double-clicking its icon? If the file was made with an older version of Office, you may get that message. Try opeing PP and, from its "File" menu, see if you can open the ppt. I've foundthat often gets around that message and then yo ucan save the file from the newer version.
If that doesn't work, consider asking in the Microsoft Office: Mac forums here:
Office for Mac forums
PowerPoint is not an Apple product and it seems a lot of people around here avoid Office. -
I am installing creative the cloud Illustrator desktop app on a machine with windows 7 64 bit running in a domain environment. The download starts and takes about runs for a bout 10 minutes and then stops with the error: DF024: Unable to preserve original file at "C:\Program Files\Adobe\Adobe Illustrator CC 2014\Support Files\Contents\Windows\AdobeLinguistic.dll" Error 32 The process cannot access the file because it is being used by another process.(Seq 1352)
I am logged in as a network administrator and there are no other apps except a web browser (Chrome) running. There are no other users logged into the machine.
How can I see what other process is using the needed file so that I can fix it?
ThanksMelissaB34 it looks like you already are reviewing your installation log files but you can find more information at Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html. From the error you have posted it appears that your current User account is either unable to update C:\Program Files\Adobe\Adobe Illustrator CC 2014\Support Files\Contents\Windows\AdobeLinguistic.dll or does not have sufficient file permissions to do so. Since you mentioned you are on a domain please ensure that you are working with your I.T. department and have correct access to this directory.
You may want to also consider logging in under a local administrator account to see if you face the same difficulties. This would help you determine if you are facing a file corruption issue or file permission issue. -
Protected View Error "The file is corrupt and cannot be opened"
All
I have a problem with Protected View in Office 2010 on Windows 7.
Symptom: When downloading a file from the Internet, the file will not open if launched directly from the source location, or saved locally and then opened. This
is impacting both Word and Excel. I haven’t tested other applications. The user gets the error "The file is corrupt and cannot be opened.".
Expected behaviour: Documents should open in Protected View because they are coming from an untrusted zone (Internet Zone).
Troubleshooting Results:
- If I turn off Protected View the error goes away and the documents open without
issue (but not in Protected View obviously)
- If I save the file locally, then copy it to a network drive, the problem goes away (because the zone information is changed?).
- If I save the file directly to a network location, then open it, the problem does not impact me (also doesn’t open in Protected View)
- If I repair Office the problem is NOT fixed
- If I reinstall Office the problem is NOT fixed
The problem doesn't impact all machines, but any new machine I build suffers the problem. All Protected View options are set by group policy and all machines are getting the correct settings.
- The setting “Enable Protected View for files originating from the Internet” is enabled
- The setting “Enable Protected View for files located in potentially unsafe locations” is enabled
- The setting “Enable Protected View for Outlook attachments” is enabled
- Enable Data Execution Prevention mode is enabled
Has anyone seen this problem or can anyone offer suggestions of where to start looking for the root cause? There are lots of postings on this around the various Internet forums, but most
just suggest turning off Protected View, that is not a valid solution to my mind, Protected View is there for a very sound reason and it is not something I'm willing to turn off, especially when it is working on some machines as expected.
Thanks.
James.Thanks for coming back, James, and I'm glad you've found the source of your
problem.
As an aside, I had no idea HP made software like that and will take a look
at it - or would if I could. Personally, although I love their hardware, I
wouldn't touch HP software, and the fact that their web page doesn't load
(in IE8) just reinforces my feeling.
Enjoy,
Tony
www.WordArticles.com
"jsc.19" wrote in message news:f9aaa05d-ad62-4f0e-96e1-6bbeb4c7098d...
> Will, thanks for taking the time to post some suggestions. I understand
> Protected View perfectly well and my post is because Protected View is not
> behaving as it should. I think my dot points above show this, still,
> thanks for taking the time to post. I think Tony is more on track with
> his questions around what has changed in my build, and this is the area
> I've focused on over the few days since posting.
>
> I've pulled my build apart and put it back together and found the issue.
> This was tedious to say the least, but turned out worthwhile. A program
> we used called Trim Context Desktop
> (http://h71028.www7.hp.com/enterprise/w1/en/software/information-management-trim.html)
> is part of our SOE. This is a records management tool, but we only use a
> small feature set, and all the Office integration options that can be
> configured during install are turned off, but it turns out that the
> application still impacts Office. If I uninstall the Trim client from our
> SOE, Office Protected View starts working as expected. We knew the full
> Trim suite wasn't ready for Office 2010, but assumed, wrongly, that since
> we didn't use the Office integration features we were OK. All our testing
> was around the application and it works fine, I just didn't connect it to
> the Office issues until systematically eliminating changes from the SOE
> build. Keep a log of your changes!!! It helped me reverse things until I
> found the problem.
>
> Uninstalling Trim also fixes and issue I had in Outlook where the
> previewers wouldn't display Office documents, reporting that the
> previewers were not installed.
>
> We will go to HP to get some support and advice around this before putting
> Trim back in to the SOE.
>
> Anyone - if you have similar problems, can I suggest you look at all your
> Office add-ins and also any applications that may potentially hook in to
> Office.
>
> Cheers all.
>
> James.
>
>
>
Enjoy,
Tony
www.WordArticles.com -
My Adobe Illustrator is CS6 and it corrupts the file if I save it using accents
My Adobe Illustrator is CS6 and it corrupts the file if I save it using accents. How do I fix this?
I mean, if I save a file called "crachá" I'm using an accent on "a" so it showed as "á" but if I do this Illustrator says the following error:
"The file may be read-only, or another user may have it open. Please save the document with a different name or in a different foulder"
and when I try to open it says:
"The file "Crachá.ai" is in an unknown format and cannot be opened."
So, my solution is to create a new file and call it "Cracha", without the accent. But it never happened before. How can I fix this legitimately?
Thanks.As for the resolution problem: upsampling an image doesn't improve its quality, because there's simply not enough information there.
As for the warning you get: it's most likely caused by RGB color mode or by placed RGB content that interacts with other content in the file (e.g. because you applied transparency)
In English it's this one:
As far as I see it there's no alternative to learning the basics of printing, color management and transparency. This is nothing that can be done by some forum posts.
Printing:
http://rufus.deuchler.net/2011/06/adobe-publishes-a-new-creative-suite-555-printing-guide. html
You need to understand what's happening on conversion of RGB to CMYK color space, which will happen when printing to offset presses. When you print on office printers, something else happens and all kinds of color may come out, because these machines sometimes do their own color correction and everything depends on how you set up the machine.
Provided you check the PDF in Acrobat: you need to set up color management there as well. This might lead to the differences (greenish) you're seeing.
Find a good book on color management and read the manual:
Creative Suite * Understanding color management (there's more about the subject)
As for transparency:
http://partners.adobe.com/public/asn/en/print_resource_center/Transparency-DesignGuide.pdf
http://partners.adobe.com/public/asn/en/print_resource_center/TXPGuide.pdf
Before sending files to a print service provider you need to get information on how they need the file. Most providers won't accept PDFs generated with "No color conversion". Or they won't guarantee for the output.
What you see on your monitor won't necessarily match the printed result unless your system is correctly calibrated and color management set up. And even then there might be differences.
Can't you contact this former colleague, pay him an amount of money and let him teach you the tools of the trade? -
Outlook 2010 error - The file is corrupt and cannot be opened
Hi experts
Im getting the error - "The file is corrupt and cannot be opened", when opening office attachments in outlook 2010.
I’ve tried disabling the protected view options in office which hasn’t fixed the issue, the only suggestion I have seen which I’m sure would work is to delete
the user profile and recreate. This seems a bit over kill to me, does anyone know what files I need to remove to fix the issue.
ThanksHi,
You can try using the Fix it tool in the following KB article to fix the issue:
http://support.microsoft.com/en-us/kb/2387587
Hope this helps.
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
When i am trying to delete the Virtual Machine folder/directory i get the below error. Virtual machine is turned off
V:\>rmdir ME-EXCAS01 /s
ME-EXCAS01, Are you sure (Y/N)? y
ME-EXCAS01\ME-EXCAS01\Virtual Machines\1B1FD14E-B3F0-4232-9F96-2A871E879CD6.xml
- The process cannot access the file because it is being used by another process
How to delete the whole folder ?
ThanksAlso, if your VM has snapshots and you delete it, you must wait for the snapshots to finish merging - the VHD files will be locked until then.
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat. -
[HTML]SignTool Error: The file is being used by another process.
Hello,
I receive this error from building a JavaScript app on a build server:
SignTool Error: The file is being used by another process.
This reproduced when building on local machine, and goes away after building again. However, our company uses gated builds so the first failure will stop an entire 2.1 hour build and I can't ship the product.
The instruction to launch SignTool is located in external files so I can't disable it, run it twice, or run it in a while loop until succeeds, ignoring failures. I have to get it to work right the first time. I looked on MSDN, and there are other people
who had this problem and never solved it.
https://social.msdn.microsoft.com/Forums/vstudio/en-US/5871d64c-e178-4f5c-85cd-a603fe56d6c7/signtask-signtool-error-the-file-is-being-used-by-another-process?forum=msbuild
http://www.codeproject.com/Questions/275454/Can-anyone-help-me-with-Signtool-Setup-Deployment
http://qualapps.blogspot.in/2006/12/code-signing.html
The only clue I have is our solution having build configurations that aren't called "Debug" and "Release", which have been cloned from Debug/Release and have WinRT apps building. If the build script for WinRT depends on anything being
called "Debug" and "Release" it wouldn't work correctly.
In any case, there is no documentation for SignTool that mentions this error - how do I fix it?Hi TripleRectified,
>> If the build script for WinRT depends on anything being called "Debug" and "Release" it wouldn't work correctly
What's you version of Visual Studio, on my side, in the Visual Studio 2013 Update 4, I created a new configuration(Copy Settings from "Debug") to build a WINJS project, but I can't see the exception you mentioned.
>>This reproduced when building on local machine, and goes away after building again
Does it happen on all local machines? We need to exclude environment facts first, for example: Tool, OS etc.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Hi,
I have installed Solaris studio and wanted to use the memory analyzer from there. I am trying it on a sample program, but it returns the above error and does not instrument the executable. Could you please help me tracing where am I going wrong.
# which cc
/opt/SolarisStudio12.3-solaris-sparc-bin/solarisstudio12.3/bin/cc
# /opt/SolarisStudio12.3-solaris-sparc-bin/solarisstudio12.3/bin/cc -V
cc: Sun C 5.12 SunOS_sparc 2011/11/16
# cc -g -O2 test.c
# file a.out
a.out: ELF 32-bit MSB executable SPARC32PLUS Version 1, V8+ Required, dynamically linked, not stripped
# ldd ./a.out
libc.so.1 => /usr/lib/libc.so.1
libm.so.2 => /usr/lib/libm.so.2
/platform/SUNW,Sun-Blade-1500/lib/libc_psr.so.1
# /SolarisStudio12.3-solaris-sparc-bin/solarisstudio12.3/bin/discover -w - ./a.out
discover: error: The file /a.out was linked by an older link step. Please use the latest compiler to do the link.
Regards,
Vikkalok. Thanks for the info.
Could you check if a small test works on your system ?
You could use this test :
% cat a.c
#include <stdio.h>
#include <stdlib.h>
int main()
int *x = (int*)malloc(100);
printf("x[0]=%d\n", x[0]);
return 0;
% cc a.c -g -xannotate
% discover -w - -o a.out.disc a.out
% ./a.out.disc
ERROR 1 (UMR): accessing uninitialized data "*x" at address 0x8090008 (4 bytes) on the heap at:
main() + 0xc2 <a.c:8>
5: {
6: int *x = (int*)malloc(100);
7:
8:=> printf("x[0]=%d\n", x[0]);
9:
10: return 0;
11: }
_start() + 0x71
was allocated at (100 bytes):
main() + 0x5e <a.c:6>
3:
4: int main()
5: {
6:=> int *x = (int*)malloc(100);
7:
8: printf("x[0]=%d\n", x[0]);
9:
_start() + 0x71
x[0]=0
***************** Discover Memory Report *****************
1 allocation at 1 location left on the heap with a total size of 100 bytes
LEAK 1: 1 allocation with total size of 100 bytes
main() + 0x5e <a.c:6>
3:
4: int main()
5: {
6:=> int *x = (int*)malloc(100);
7:
8: printf("x[0]=%d\n", x[0]);
9:
_start() + 0x71
DISCOVER SUMMARY:
unique errors : 1 (1 total)
unique warnings : 0 (0 total) -
I can't get 10.7.5 to download. Have gone through "Software Update" several times and each time error messg suggests perhaps the file has been corrupted when downloading. Current OS=10.7.4 Thoughts?
Try downloading from here. http://support.apple.com/kb/DL1583
Message was edited by: hpr3 -
Move-item: The process cannot access the file because it is being used by another process.
Hey,
I have a powershell script where I first use Get-childitem to receive a number of files.
Then I do some stuff with it and try to move the file afterwards.
Unfortunately if I am using a lot of files I receive very often the error:
The process cannot access the file because it is being used by another process.
Even -Force parameter does not help further.
Based on my look around it is not used by another process.
I think it is still 'in use' by powershell from script commands previously.
Is there any way to 'see' if the file is still in use currently and wait for this to end?
Or can I 'close' the current usage of the file?
Thank you :)Hey,
Thank you.
I build the following function.
But either the $return = $true I receive "The process cannot access the file because it is being used by another process." when I try to move-item... :(
Function Wait-FileUnlock($FilePath){
Write-Host " "
$FileInfo = New-Object System.IO.FileInfo $($FilePath)
DO{
try{
$fileStream = $fileInfo.Open([System.IO.FileMode]::Open, [System.IO.FileAccess]::Read, [System.IO.FileShare]::Read)
$return = $true
catch{
Start-Sleep -Milliseconds 5
Write-Host "." -NoNewline
$return = $false
While($return -ne $true)
$Error
return $return
Another functions is:
Function Wait-FileUnlock($FilePath){
Write-Host " "
DO{
$Error.Clear()
Rename-Item $FilePath $FilePath -ErrorAction SilentlyContinue | Out-Null
Start-Sleep -Milliseconds 5
Write-Host "." -NoNewline
While($Error.Count -ne 0)
This one waits .. but it seems not to end waiting at any time :( -
The file might be corrupted, truncated, or in an unexpected format.
I am currently having issues with the application Preview on my iMac. I have to look at thousands of pictures of documents, and use preview to view these photos of documents that are in a .jpeg format. Most of the time I open about 10,000 to 15,000 images with preview. I then hop through these images looking at the information. Until recently when I updated my OS to Mountain Lion. With my older operating sytem I could open thousands of photos in preview and have no problems viewing them. Now I can't view all the photos at once without getting an error message. The current error message that I receive is "The file might be corrupted, truncated, or in an unexpected format." I can open these files individually if I wish, but I cannot look at all of them in a group. I have not had this issue with any of the previous versions of Mac OS. Several other people in my office have the same issue, and are depending on me to get this resolved. Please help me be a hero.
Regards,
EugeneBack up all data. Quit Preview if it's running.
Hold down the option key and select Go ▹ Library from the Finder menu bar. From the Library folder, delete the following items, if they exist:
Caches/com.apple.Preview
Containers/com.apple.Preview
Preferences/com.apple.Preview.LSSharedFileList.plist
Preferences/com.apple.Preview.SandboxedPersistentURLs.LSSharedFileList.plist
Saved Application State/com.apple.Preview.savedState
Launch the application and test. -
[Solved] Error : The file or folder path /Probl?me 1 does not exist
Hello,
I encountered this error
The file or folder <path>/Probl?me 2 does not exist
while I was trying to open a directory already extracted from a zip file containing directories with special characters. In this case, it is a "è" that was misinterpreted as a "?".
I searched the forums and on google, the solutions proposed do not work for me. Although, I have to deal with these files written in french, I would like to have my locale in english (US), with a system wide support for special characters.
Attempt 1: Adding the option : iocharset=utf8 into the fstab, like this :
fstab :
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
none /dev/pts devpts defaults 0 0
none /dev/shm tmpfs defaults 0 0
/dev/cdrom /media/cd auto ro,user,noauto,unhide 0 0
/dev/dvd /media/dvd auto ro,user,noauto,unhide 0 0
/dev/fd0 /media/fl auto user,noauto 0 0
/dev/disk/by-uuid/24ba75ac-e52d-40eb-a599-83b394b500b2 /boot ext2 defaults 0 2
/dev/disk/by-uuid/c797f409-00bc-479a-b4d6-ab49943f644b / ext4 defaults 0 1
/dev/disk/by-uuid/668427a8-5f51-42bd-a316-fc7984bf5f4f /var ext4 defaults 0 2
/dev/sda7 swap swap defaults 0 0
/dev/disk/by-uuid/417cd1b7-8f06-414b-84d5-e8714d9646ab /home ext4 defaults 0 2
/dev/disk/by-uuid/ef9aa00e-0515-4d7b-aa23-8096e787250d /usr ext4 defaults 0 2
/dev/disk/by-uuid/17d401b7-2fc7-4d9f-8e17-657d86926d2e /tmp ext4 defaults,iocharset=utf8 0 0 <<<<<<<<<<<<<<
/dev/disk/by-uuid/71e543b6-e06c-4b0e-b1e3-3b491ff1fefe /var/cache/pacman/repos ext4 defaults 0 2
#/dev/sda12 /mnt/archive ext4 defaults 0 2
#.host:/ /mnt/hgfs vmhgfs defaults 0 0
This solution does not work, because after adding iocharset=utf8, in front or after a "defaults", after a reboot, while mounting the filesystem, there is the following error message:
Mounting Locale Filesystem :
mount: wrong fs type, bad option, bad superblock on /dev/sdb1,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
$ dmesg | tail
phy0: Selected rate control algorithm 'iwl-agn-rs'
EXT4-fs (sda5): re-mounted. Opts: (null)
EXT4-fs (sda5): re-mounted. Opts: (null)
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda10): Unrecognized mount option "iocharset=utf8" or missing value <<<<<<<<<<<<<<
EXT4-fs (sda11): mounted filesystem with ordered data mode. Opts: (null)
Adding 2104476k swap on /dev/sda7. Priority:-1 extents:1 across:2104476k
tg3 0000:07:00.0: irq 44 for MSI/MSI-X
Attempt 2: Changing all the locale features in KDE and in /etc/rc.conf as well.
$ vim /etc/rc.conf
LOCALE="fr_CA.utf8"
HARDWARECLOCK=""
TIMEZONE="America/Montreal"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
It is complicated to remove these directories. I had to use the inum to get precisely these directories before removing them.
$ ls -il
total 8
1577566 drwxr-xr-x 2 [username] [username] 4096 28 jan 07:09 Probl?me 1
1577573 drwxr-xr-x 2 [username] [username] 4096 28 jan 07:09 Probl?me 2
$ find . -inum 1577566 -exec rm -i {} \;
rm: impossible de supprimer « ./Probl\212me 1 »: est un dossier
Note that the hypothetical character 'è' is represented has a '\212', a 'È' if seen as a extended ASCII character.
These directories cannot be deleted this way :
$ rm -r Problème\ 1
rm: cannot remove `Problème 1': No such file or directory
or
$ rm -r ProblÈme\ 1
rm: cannot remove `ProblÈme 1': No such file or directory
What should I do to be make the operating system recognize those special character, and interpret them correctly ?
Last edited by ramboman (2011-01-29 21:45:50)I found a working solution, but better solution are also welcome
I had to have fr_CA not only in utf8 but also in iso88591. I had to modify the /etc/rc.conf this way :
LOCALE="fr_CA" <<<<<<<<<<<<<<
HARDWARECLOCK=""
TIMEZONE="America/Montreal"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
To preserve the english US language system wide, I had to add the following line in the /etc/profile :
# Allow french special character while in en_US
export LANG=en_US
The character misinterpreted by a "?" is now seen :
as a "è" in dolphin
as a "?" in the console
It is now possible to access the folders. -
I can't install or uninstall iTunes on my laptop. I've followed all the steps on Apple Support as well as Microsoft support. I get the error "The feature you are trying to use is on a network resource that is unavailable. Pick an alternate path to a folder containing the installation package 'iTunes.msi". This has been going on for a couple of weeks now and I'm very frustrated. From what I can see, I'm not the only one with this problem, but I have yet to see anyone post a solution that works. Microsoft wants to charge me $99 to troubleshoot it for me and Apple will charge $20. I think both are ridiculous as this is obviously not "operator error".
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
OneNote recordings "We're sorry, we can't open the file because it is in use by another program."
Constantly, OneNote breaks and screws up my recordings that are synced with my lectures. It is such a fragile process and very frustrating. As soon as I'm done recording, I press stop. When I test the recording, it says, "We're sorry, we can't open
the file because it is in use by another program." I just recorded and then stopped it. If i close and reopen OneNote, it says, "oneNote is cleaning up from the last time it was open." And the recording still says it's in use by another program.
I've even restarted the laptop and it still won't open. The only way i could salvage the file is if I copy and paste it into another folder, and then it will open through windows media player, but all the live syncing with my notes are gone. Where are these
files stored? If I could save the sound and find the file/format that holds the syncing data again, I could work around this. They are no where to be found on my computer. Other forums give locations, but my folders are empty. Some other recordings work and
sync nicely, but I have still lost many recordings to this error. However, if I play a file and then close it without stopping playback, that file, too, will now be unusable. It will be stuck as "We're sorry, we can't open..." no matter what i do
and again i have to copy/paste it into a new folder and then move it back. I had the same problem on my last laptop. I record in Windows Media Audio 10 Professional at 192 kbs, 48 kHz, and stereo CBR. I need the high quality because the lecturer is too quiet.
It seems to happen when I record long lectures, 45 min+. Shorter recordings tend to work fine.
Please help, this would make note taking so much easier.A bit of a confusion on my part;
Now we have created these REPORTS using Basic Crystal Report 10.5, which comes bundled with Visual Studio 2008 and .Net Framework 3.0. Now on our machines, we have never experienced any issues.
Going by the above, you should have references to CR assemblies of version 10.5.3700 only. No other references.
Now, looking at this paragraph:
BUT on the DEV server (web server) which has .net Framework 3.0 and in its GAC its has CRYSTAL DLLs version 11.5 (required to create an Object of ReportClass and its related functions) ; sometimes we get the following error while exporting crystal report to pdf:
I wonder what runtime was deployed to the server. E.g.; if you are using CR 10.5, your assemblies will be 10.5.3700 and you should be deploying the following runtime (depending on 32 bit / 64 bit, etc.):
CRRedist2008_ia64.msi
https://smpdl.sap-ag.de/~sapidp/012002523100006255262008E/CRRedist2008_ia64.zip
CRRedist2008_x64.msi
https://smpdl.sap-ag.de/~sapidp/012002523100006255272008E/CRRedist2008_x64.zip
CRRedist2008_x86.msi
https://smpdl.sap-ag.de/~sapidp/012002523100009351342008E/CRBasicVS2008_redist_x86.zip
One way to check on what is actually loading is to use the [Modules|https://smpdl.sap-ag.de/~sapidp/012002523100006252802008E/modules.zip] utility.
- Ludek
Maybe you are looking for
-
What can I do to get my pictures back if my iPhoto doesn't want to open anymore?
My iPhotos says I have to restart or shutdown my computer in order for it to reopen but when I do so it just keeps saying the same thing and now I have lost all my photos. What can I do to get them back?
-
My 4S crashed when wanted to install 8.1.3
My 4S crashed when wanted to install 8.1.3, and now I can't restore or update from iTunes 'Cos it says: "there was a problem downloading the software for the iphone. The network connection was reset.".... and also I get "error 3253". I'm on windows 8
-
How do I get refund on some of apple app that I have downloaded and didn't liked it.
How do I get refund on some of apple apps that I have downloaded and didn't need it?
-
I am experiencing problems with my WhatsApp/Email/Facebook/Facetime in terms of automatic "push notifications". Previous to this update, you had to activate push notifications from the settings tab, which was simple. However, this facility has now b
-
i can't view photo's on tv(samsung). I connected the mini diplay port adapter to hdmi # 4 on tv and only thing i get is system preference display