Error The file just loaded does not appear to be executable.
Hi there,
I have some problems with a Sun Fire T2000. Solaris 10 was installed one year ago. The server went down and now I am trying to connect to recover the dates and make a new installation.
Booting the server, I don't get any message. If I type #. I reach to sc> mode and from there I can get to ok prompt. From either mode, I can't get in the operating system.
From the ok prompt I issued "show-disks" and I booted with the cdrom choosing the option from the output of "show-disks". I got the "The file just loaded does not appear to be executable."
I searched the error and then I booted with "boot cdrom -s" and I got the "ERROR: /virtual-devices@100/console@1: Last Trap: Division by Zero".
Please advice for a new installation.
Thank you.
Hi, and again thanks.
I understood that this server runs on different levels, like with firmware OpenBoot (ok prompt) or System Controll (sc>).
I understood the different setups can be made from ok prompt, like the problem I have now.
I am at the ok prompt. The "printenv" showed me that I was booting from net1, which is wrong because the installation just ended. So I changed to "disk" following your indications. I checked with printenv and indeed the boot sequence was changed to boot disk.
I issued the boot command I after the message "Boot device: disk File and args:" it looks like hanging. I am sure I can get back to sc> prompt but it looks like a loop to me: how do I get into the operating system? I looks I can switch only from ok to sc and backwards. But, after booting I'd like to enter in Solaris OS, not OpenBoot firmware or System Control...
Thank u for the time and listening.
Similar Messages
-
(LDOM) The file just loaded does not appear to be executable.
Sorry if this is not the right forum - it seems to be the closest one for things about LDOMs; plese let me know if I should post somewhere else.
I have installed LDoms_Manager-1_2.zip on a T5220 Server; following the book ("Logical Domains 1.2 Administration Guide") I set up the control domain etc, then a guest domain (cranachan) - so far all appears well. I downloaded the dvd iso of Solaris 10 (sol-10-u7-ga-sparc-dvd.iso) and added it to the guest as described, started the domain and issued "boot vdisk_iso:f -v" - this seemed to work well, but there was an error that turned out to be that I had given the wrong path for the system disk.
So I started over - removed the guest domain and the disk definitions for both guest and control domain, and removed the guest; then recreated everything. This time, when I "boot vdisk_iso:f -v" I get:
The file just loaded does not appear to be executable.
Any idea what may have happened? It makes no sense to me; not unless the iso file has been corrupted, but it doesn't seem to have been modified, and I can mount it as a loop-back fs in linux.I have the same problem with a Netra T1 system. Solaris 10 installed fine and it won't boot. It did have Solaris 8 on the system, but I put in new drives to start my Solaris 10 install.
I tried booting to single user cd-rom (ok boot cdrom -s) and ran this:
# installboot /usr/platform/SUNW,UltraAX-i2/lib/fs/ufs/bookblk /dev/rdsk/c1t0d0s1
(SUNW,UltraAX-i2 was derived from # uname -i)
It didn't help.
I also tried "setenv diag-switch? false" at the okay prompt. It didn't help
Any thoughts? -
The file just loaded does not appear to be executible
Please help!
I have a Ultra 5 with a recently upgraded 30gig seagate IDE drive. I am trying to install Solaris 8 10/01 of which appears to install correctly, but upon reboot I get the above referenced message. I have tried installing with various disk partitioning methods. I have also tried to manually copy the kernel over from the cdrom to the / slice.
Solaris 9 installs ok but I would rather run 8 to be able to run the pc launcher software.
Thank you,
David DeTinneThank you for the quick reply.
It seems the problem was the first software disk. I went back to the download page and downloaded the multiple files vs. the single file.
Booted straight off of the Software disk 1 and now here I am, up and running.
Thanks again! -
Hi i am getting an error like this while installing Live Cycle Server " The file merge_modules\lc11_common_iam_zip does not exist This file is required sucessfullly run the Live Cycle Installer.Can any one help me on resolving this issue it would be of great help..thanks .
I think in your situation it would be worth trying the things listed under the event. It does have to do with FRS and it's easy to do. I've used it to fix journal errors after a server unexpectedly restarts and sysvol stops replicating. I
could see where it could fix your issue, and if it doesn't, you're out 5 minutes. :)
The listed registry key does not exist
Expand HKEY_LOCAL_MACHINE.
Click down the key path:
"System\CurrentControlSet\Services\NtFrs\Parameters"
Double click on the value name
"Enable Journal Wrap Automatic Restore"
-
After choosing my device the "add music" button does not appear. I just downloaded ITunes 11. Any suggestions?
Read the User's Guide and learn how to add content to the device.
-
When an image is inserted here using clipboard, it appears in the editor, but it does not appear in
when an image is inserted here in forum po editor using clipboard, it appears in the editor, but it does not appear in the post. When the image is inserted from a file, it works
Im not completely sure, why you are pointing out the very same thing I'm pointing out too. If you re-read my original post thoroughly, you will find - at its very end - the sentence "When the image is inserted from a file, it works". Since I'm not aware of the way how to insert the image from a file in a procedure other, then clicking the "camera" icon, I hold such a sentence for more then enough to point out, that the camera icon works fine for me (if you re-read my post thoroughly and pay detailed attention of my expression "using clipboard", then you shall definitely evaluate this expression as covering both ways an image can reach the cliboard, eg. Copying from a graphical editor/processor or dragging&dropping a graphical file).
However more then this, your post does in fact NOT reply to the fact, why the WYSIWYG editor box allows the insertion of an image from clipboard, but then fails to upload it and thus it is not displayed in the post.
For the sake of completness, I must also point out, that your last sentence of your post "And that's what it is there for" does not bring much clarity about that thing - while I fully understand, as one can observe from my "When the image...it works" sentence, the functionality, purpose and propper handling of the "camera" icon, I cannot agree with such a behaviour of the editor, that allows an operation to be done (What You See) that does not affect the outcoming result (Is What You Get).
From the theory of designing (G)UIs one may learn, that in such a case the operation should either fulfill completly (eg. display the clipboard-inserted image in the resulting post) or fail completly in the beginning (when Pasting the image into the text), either silently (just not displaying the image in the editor field) or with an error warning such as "Insertion of images/bitmaps from clipboard is not permitted". For Windows-like environments (such as, but not limited to, Microsoft Explorer, KDE, Gnome, IceWm....) the change of the dragging cursor to display a kind of "No way" or "no entry" pictogram, is also advisable.
For the sake of completness of my reaction I also might percieve your last sentence as a kind of irony or sarcasm, which however I definitely do not find appropriate behaviour, more over I might call it an "arogant rudeness" in case of such a "VIP" member with more then 9000 posts in the time when this post is being written, with a hint of overworking, malicous intends, inattention, ego-centricism or any other personal failure(s) or a combination of them, that you should - in case they are present - definitely pay attention to in your private life.
Moreover, let me please point out, that Im not much pleased about the way this forum works with its users, since I find the bug I have discovered, only a small one (a category B one might say in the A-B-C scheme, eg. a category, that does not directly influence or prohibit the execution of the main business cases, however it may result in discomfort, data loss or operation repetition, such a category would be most possibly a category C in the A-B-C-D scheme). Therefore I must explicitly express my annoyance that you have the guts to handle the post I did like this, when - in my opinion - the post has been written in such a manner that it was merly a polite point out of a small bug, thus it was kept as brief as possible, but fully covering the description of the scenario, alternate scenarios and their outcomes. Moreover, I'm definitely displeased, that you allow yourself to post such a post, that - instead of exploring the matter - throws the whole matter on the head and inside-out, or, one may say, kicks the bucket, and forces the original author, in this case me, for re-accounting for himself, moreover the ambivalency of your post opens such many possibilities to account for, that the time and resources the self-accounting autor has to spent, heavily overweighting the importance, significance and impact of the bug itslef.
So let me please advise you for the next time:
- to explore posts with more thoroughness, evaluating their expressions and sentences much more deeply, rather then just glance through on their surface
- think twice before answering and try to figure out how such answer might be percieved
- try to do less posts, but with higher quality
- try to employ more politeness and correct behaviour
- approach the matter with more humble and curious attitude rather then with a "I-know-everyting-better" standpoint
With regards
Lukas Plachy
Misstypes corrected by rheingold. -
The edit JSP page does not appear...
Hi!
I make a simple JSF application, I would like to show a DB table in a h:dataTable component and edit a given row after click, but the edit JSP page does not appear. I click the on link in the table, but the list is loaded again and not the edit page...:(
(no exception in application server console)
Please help me!
my code:
**************************************** listmydata.jsp***************************
<h:dataTable
value="#{myBean.myDataList}"
var="myDataItem"
binding="#{myBean.myDataTable}"
>
<h:column>
<f:facet name="header">
<h:outputText value="Ajdi"/>
</f:facet>
<h:commandLink action="#{myBean.editMyData}">
<h:outputText value="#{myDataItem.id}"/>
</h:commandLink>
</h:column>
********************************* MyBean.java *******************************
package bean;
import java.sql.Connection;
import java.sql.SQLException;
import java.util.ArrayList;
import java.util.List;
import javax.faces.component.html.HtmlDataTable;
import javax.faces.context.FacesContext;
import javax.naming.InitialContext;
import javax.naming.NamingException;
import javax.sql.DataSource;
import wrapper.MyData;
public class MyBean {
private List myDataList;
private HtmlDataTable myDataTable;
private MyData myDataItem;
protected Connection Conn;
// *********************** actions ***********************
public String editMyData() {
myDataItem = (MyData)getMyDataTable().getRowData();
return "editmydata";
public String saveMyData() {
try {
updateDataInDB();
catch (SQLException e) {
System.out.println(e);
System.err.println(e);
e.printStackTrace();
catch (NamingException e) {
System.out.println(e);
System.err.println(e);
e.printStackTrace();
return "listmydata";
// *********************** setter ***********************
public void setMyDataList(List myDataList) {
this.myDataList = myDataList;
public void setMyDataTable(HtmlDataTable myDataTable) {
this.myDataTable = myDataTable;
public void setMyDataItem(MyData myDataItem) {
this.myDataItem = myDataItem;
// *********************** getter ***********************
public List getMyDataList() {
if (myDataList == null || FacesContext.getCurrentInstance().getRenderResponse()) {
loadMyDataList();
return myDataList;
public HtmlDataTable getMyDataTable() {
return myDataTable;
public MyData getMyDataItem() {
return myDataItem;
// *********************** others ***********************
public void loadMyDataList() {
try {
getDataFromDB();
catch (NamingException e) {
System.out.println(e);
System.err.println(e);
e.printStackTrace();
catch (SQLException e) {
System.out.println(e);
System.err.println(e);
e.printStackTrace();
void getDataFromDB() throws NamingException, SQLException {
myDataList = new ArrayList();
java.sql.PreparedStatement PreStat = ownGetConnection().prepareStatement("SELECT id, name, value FROM BEA_JSF_SAMPLE");
PreStat.execute();
java.sql.ResultSet Rs = PreStat.getResultSet();
while(Rs.next()) {
MyData OneRecord = new MyData();
OneRecord.setId(Rs.getLong(1));
OneRecord.setName(Rs.getString(2));
OneRecord.setValue(Rs.getString(3));
myDataList.add(OneRecord);
void updateDataInDB() throws SQLException, NamingException {
String sql = new String("UPDATE BEA_JSF_SAMPLE SET name=?,value=? WHERE id=?");
java.sql.PreparedStatement PreStat = ownGetConnection().prepareStatement(sql);
PreStat.setString(1,myDataItem.getName());
PreStat.setString(2,myDataItem.getValue());
PreStat.setLong(3,myDataItem.getId().longValue());
PreStat.execute();
ownGetConnection().commit();
Connection ownGetConnection() throws SQLException, NamingException {
if (Conn == null) {
InitialContext IniCtx = new InitialContext();
DataSource Ds = (DataSource)IniCtx.lookup("JDBCConnectToLocalhost_CRS");
Conn = Ds.getConnection();
return Conn;
******************************* editmydata.jsp *****************************
<%@ page language="java" contentType="text/html;charset=UTF-8"%>
<%@ taglib prefix="f" uri="http://java.sun.com/jsf/core"%>
<%@ taglib prefix="h" uri="http://java.sun.com/jsf/html"%>
<html>
<body>
<f:view>
<h:form>
<h:panelGrid columns="2">
<h:outputText value="Name"/>
<h:inputText id="name" value="#{myBean.myDataItem.name}"/>
<h:outputText value="Value"/>
<h:inputText id="value" value="#{myBean.myDataItem.value}"/>
</h:panelGrid>
<h:commandButton action="#{myBean.saveMyData}" value="Save"/>
</h:form>
</f:view>
</body>
</html>I have put his lines in the faces-config.xml and now it works:
<navigation-rule>
<from-view-id>*</from-view-id>
<navigation-case>
<from-outcome>editmydata</from-outcome>
<to-view-id>editmydata.jsp</to-view-id>
</navigation-case>
</navigation-rule>
<navigation-rule>
<from-view-id>*</from-view-id>
<navigation-case>
<from-outcome>listmydata</from-outcome>
<to-view-id>listmydata.jsp</to-view-id>
</navigation-case>
</navigation-rule>
I don't understand, that I define the next JSP page in the bean java file, which must be shown, but I must define this in the faces-config.xml as well.
for example:
public String editMyData() {
myDataItem = (MyData)getMyDataTable().getRowData();
return "editmydata";
is it right or Do I make a mistake somewhere? -
MBAM - SCCM 2012 Reports - Error: the 'MBAM Policy' view does not exist
Hi
I have installed MBAM with SCCM 2012 integration. A single server install with SQL server 2012. Mostly it has gone smoothly and laptops are being encrypted and pins stored and recoverable. The problem I have is reports are not showing. I get the following
error message.
"Error: the 'MBAM Policy' view does not exist"
Any ideas why this is? I get the same error message with all 4 reports.Hi Slycy,
There is another thread that seems to be a similar issue
here that may help you. The last post in particular has a number of steps that you can use to speed up creation of the views:
Just for future reference, there are quite a few things that have to happen before the view is created. This is merely how CM works.
Make MBAM MOF changes
Select TPM spec version in hardware inventory
Install MBAM CM Integration feature
Perform a machine policy refresh cycle on a client to get the MOF changes that need to be inventoried
Perform hardware inventory
Update MBAM Supported Computers collection membership. The machine should appear if it meets the criteria
Run another machine policy refresh on the client so that the Configuration Baseline will come down
Make sure that the MBAM agent has woken up once
Evaluate the Configuration Baseline
The MBAM views should be created now.
You don't have to do this for every machine, but this is the process to speed it up. If you let CM do it, it could take over a week before the view is created the first time, depending on when Hardware inventory runs, etc.
Hope this helps,
David -
The file may be corrupt. The file header checksum does not match the computed checksum.
I just put Vista Home Premium on a computer I was going to give to my son. Upon adding some hardware I kept getting the above screen. "The file may be corrupt. The file header checksum does not match the computed checksum.' When I booted in safe mode and slow boot, it hung on crcdisk.sys. I removed everything except the keyboard hhd dvd and fdd and it still does the same thing. I tried to reinstall Vista but it keeps hanging. From reading a lot of other threads this seems to be a big problem. I doubt if the product should have been marketed. But.... If anyone can help me get it booted I would like to try XP instead. I tried to install XP on the same drive and it hungs there too.
Hi ballen6721,
Thank you for the post.
This issue can occur if the newly installed hardware device is incompatible with the system.
Based on the current situation, I suggest trying the following steps to troubleshoot the issue:
Method 1 Device Clean Boot
============================================
Please unplug all unnecessary devices such as sound card, printer, network card and TV card.
Method 2: Startup Repair from the Windows Recovery Environment (WinRE)
============================================
1. Insert the Windows Vista installation disc into the disc drive, and then start the computer.
2. Press a key when the message indicating "Press any key to boot from CD or DVD …". appears.
3. Select a language, a time and currency, and a keyboard or input method, and then click Next.
4. Click Repair your computer.
5. In the System Recovery Options dialog box, choose the drive of your Windows installation and click Next.
6. At the System Recovery Options Dialog Box, click on Repair your computer.
7. Click the operating system that you want to repair, and then click Next.
8. In the System Recovery Options dialog box, click Startup Repair.
Method 3: Use the Windows Recovery Environment (WinRE) to run System Restore ============================================
1. Insert the Windows Vista installation disc into the disc drive, and then start the computer.
2. Press a key when the message indicating "Press any key to boot from CD or DVD …". appears.
3. Select a language, a time and currency, and a keyboard or input method, and then click Next.
4. Click Repair your computer.
5. In the System Recovery Options dialog box, choose the drive of your Windows installation and click Next
6. At the System Recovery Options Dialog Box, click on System Restore.
7. Follow the System Restore Wizard instruction and choose the appropriate restore point.
8. Click Finish to restore the system.
Note: If you computer is an OEM one, the method to enter WinRE can be different, you may contact your OEM to consult how to enter WinRE.
Can we start the computer now?
If the issue persists, please help confirm the following points:
1. What hardware changes have you made recently?
2. Can we enter Safe Mode now?
I look forward to hearing from you.
Best regards,
Tim Quan
Microsoft Online Community Support -
Ihave a movie stuck in itunes for 3 weeks taking up 7 gigs of memory.I deleted it from the videos app but still remains on the ipad.I also tried deleteing it from itunes on the pc but it does not appear there.Dont want to reboot the ipad if possible .Thanks
That list includes all the apps that you installed to your device directly from iTunes on the computer, or which were purchased on the iOS device and subsequently transferred to iTunes on the computer.
If you right click on any item in that list and choose "Show in Windows Explorer" it will open your iTunes application installer directory on your computer, which should be:
C:\Users\User\Music\iTunes\iTunes Media\Mobile Applications
In there are all your saved application installers (*.ipa files). You need to delete those actual installer bundles and then make sure to NOT allow the "transfer purchased content" when you sync or backup in iTunes (as that will just put them back on your hard drive).
One caveat to removing those, is that if you ever wish to keep a specific release of a particular app, and the developer replaces the iTunes/App store version with something else, your sole source for your older version will be your own stored copy of it. So for example, when PDF expert released their iOS 7 update, and charged everyone full price for it, if you wished to keep using the previous version on your own devices, then you needed to keep a copy of the installer on your own computer as that older version is no longer available in the store front. -
The music search on the I tunes store does not appear after the latest upgrade to my I phone 4
The music search feature on the I Tunes store does not appear. Unable to search since the latest upgrade.
If you're sure where your library is run this script iTunesXMLPath. The library folder is the folder that file is in. Your media folder is recorded under Edit > Preferences > Advanced and is usually a subfolder of the library folder.
I recommend you backup your library with the method in this user tip.
tt2 -
The phone company was here working on something while I was gone. They sat down at my computer (iMac) and since then HDR toning doesn't work. Get the code: Error 48: File or folder does not exist. Line: 11 -> $.evalFile(g_StacScriptFolderPatch + "StackSupport.jsx"); How can this be fixed?
Go to //Applications/Adobe Photoshop [Version]/Presets/ Scripts/Stack Scripts Only/ and see if StackSupport.jsx is there. If it is not, uninstall and reinstall Photoshop to have it added back in. If it is there, first try recreating the Photoshop Preferences (hold down Command+Option+Shift while launching Photoshop).
-
HDR Toning Error 48: File or Folder Does Not Exist
After migrating to a new computer HDR Toning is no longer available.
I get a pop-up: Error 48: File or Folder Does Not Exist
Line 11 -> $. evalFile(g_StackScriptFolderPath + "StackSupport.jsx");
What's the fix for this, if anyone knows?
Thanks.Go to //Applications/Adobe Photoshop [Version]/Presets/ Scripts/Stack Scripts Only/ and see if StackSupport.jsx is there. If it is not, uninstall and reinstall Photoshop to have it added back in. If it is there, first try recreating the Photoshop Preferences (hold down Command+Option+Shift while launching Photoshop).
-
Ruler Tool- Error 48: File or folder does not exist
I am trying to use the new RULER TOOL in CS5 (64-bit mode) running 10.6.4 and I get the following error:
Error 48: File or folder does not exist.
Line: 31
-> $.evalFile( g_StackScriptFolderPath + "Geometry.jsx");
Any ideas?i'm getting the exact error using Windows XP with CS5.5
error 48: file or folder does not exist
line: 31
-> $.evalFile(g_StackScriptFolderPath + "Geometry.jsx");
HELP!!!
someone
hello ... anyone out there?
how do we get support for this error?
e -
I am running IE 11 on Windows 7 Home Premium 64 Bit Service Pack 1. When I attempt to install Flash Player, it goes through all of the steps, tells me the player is installed, and welcomes me. I cannot open the player and it does not appear in the Start Menu, Task Manager, System Tray, or anywhere else. When I try to open a file, the site tells me Flash player is not installed. I have even downloaded it to a separate folder and ran the install with IE shut down completely. And Shockwave in ENABLED but in 32 bit .I have been trying to get this to work for about 3 weeks now. HELP!!!
Flash Player is a browser add-on, not an executable program.
If you need to open a local SWF file you will need the standalone player (Projector) from http://www.adobe.com/support/flashplayer/downloads.html
Note that the download is the player, not an installer, so you will need to make the file association manually.
Maybe you are looking for
-
What`s wrong with my controlfile multiplexing setup?
Originally, my database was using the default controlfile multiplexing setup and it was working perfectly fine. But then, start today, it doesn`t work any more. when i try to mount the database, it always throw below errors. ORA-00205: error in ident
-
Problem in File Receiver comm channel
Hi, I can't see anything in the Recevier communication channel in the RWB > Component Monitoring>Comm. channel monitoring-->Comm. channels. I do have selected my comm channel.Its showing the message as "Comm. channel is configured correctly and start
-
How to remove a message from a thread...
I would much rather have it, that mail.app could figure out how to thread my messages correctly, but for some reason, when the subject is the same, it always thinks it is the same thread (I have a zillion mails with the subject "meeting"!) Is there a
-
Different Ports for Sender and Receiver?
For testing a tool it would be nice to run RTPSender and Receiver on the same computer. But here?s the problem. I run VideoTransmit and AVReceive2 (both from the Sun code samples) with the following parameters. VideoTransmit should send to IP A and t
-
Want to ADD PARAMETERS to Report
hi guys iam new to discover tool rite know my task is to assign parameters (date) to the existing report pls put some light on this thank you Gurus in advance