Error The following product(s) could not be activated
Can somebody help me, I received this error while I'm trying to activate the said product.
NI Product Activation
Step 2: Review Your Confirmation
Error The following product(s) could not be activated
National Instruments is unable to provide activation codes for the following items in your request. Possible causes could include: serial number was not found; serial number was found, but does not match feature/version; serial number is found, but is not yet active.
Serial Number Product Version
xxxxxxxxx Vision Acquisition 8.6
Serial number is not found, is found but does not match feature/version, or is found but not yet active
Time to talk to NI.
Sometimes corporate firewalls can cause problems with activations.
Similar Messages
-
I am trying to deploy a project in TestStand 3.5 and I am using LabVIEW 8.2. When I build my project, I always get the following error message "Error: The following file(s) could not be copied:". Then it lists about 20 VI's that it is apparently unable to copy. The VI's listed appear to be randomly chosen from the 8 LabVIEW libraries I included in my TestStand workspace file. What are the possible reasons that TestStand is unable to copy these VI's?
As a side note, I have successfully mass compiled all the VI's without any errors.Hello Casey,
I have created a new workspace from scratch with some simple VI's that demonstrate the issue. Please look at the attached folder that includes the code and a text file of the build status log. This log looks a little different from my original, but it still has the same error. This code was generated in TestStand 3.5 and LabVIEW 8.2.1.
It appears to give this error on (some) files that have a decimal point in the filename. This error started occurring when I upgraded from LabVIEW 7.1 to 8.2.
Thank you.
Attachments:
Test 1.zip 47 KB -
Some Items for the following product(s) could not be installed successfully
I had photoshop cs5.1..uninstalled it using adobe uninstaller tool.
When I'm trying to install my creative suite at the end this is what shows.
Still able to use the new products but I don't understand what these errors and warnings mean. Thx.
Exit Code: 6
Please see specific errors and warnings below for troubleshooting. For example, ERROR: DF015, DW063 ... WARNING: DS012 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 3 error(s), 15 warning(s)
----------- Payload: {0C4E7429-E920-4125-980E-029A87AE0A4D} AdobeColorCommonSetCMYK CS6 4.0.0.0 -----------
WARNING: DS012: LocalizeFile: Localized string not found for locale 'en_GB' try fetching for en_US(Seq 21)
WARNING: DS012: LocalizeFile: Localized string not found for locale 'en_GB' try fetching for en_US(Seq 22)
----------- Payload: {C7B1C1B3-368D-4C32-A818-83F1554EB398} AdobeColorCommonSetRGB CS6 4.0.0.0 -----------
WARNING: DS012: LocalizeFile: Localized string not found for locale 'en_GB' try fetching for en_US(Seq 11)
WARNING: DS012: LocalizeFile: Localized string not found for locale 'en_GB' try fetching for en_US(Seq 12)
----------- Payload: {36682D68-3834-487E-BA49-DFA4AB0A2E32} Adobe CSXS Infrastructure CS6 3.0.0.0 -----------
ERROR: DF015: Unable to delete symlink "/Library/Application Support/Adobe/CS6ServiceManager/CS6ServiceManager.app/Contents/Frameworks/adobe_caps.fram ework/Resources"(Seq 10)
ERROR: DW063: Command ARKDeleteSymlinkCommand failed.(Seq 10)
----------- Payload: {48623899-C152-457D-9B30-1F957332AC2F} AdobeColorPhotoshop CS6 4.0.0.0 -----------
WARNING: DS012: LocalizeFile: Localized string not found for locale 'en_GB' try fetching for en_US(Seq 3)
----------- Payload: {78E38D75-4D92-4F6E-B631-17A436BED680} AdobeColorVideoProfilesCS CS6 4.0.0.0 -----------
WARNING: DS012: LocalizeFile: Localized string not found for locale 'en_GB' try fetching for en_US(Seq 5)
----------- Payload: {9124DF4E-617D-486B-A970-8FA632244F24} Adobe Photoshop CS6 Core 13.0.0.0 -----------
WARNING: DS012: LocalizeFile: Localized string not found for locale 'en_GB' try fetching for en_US(Seq 2259)
WARNING: DS012: LocalizeFile: Localized string not found for locale 'en_GB' try fetching for en_US(Seq 2260)
WARNING: DS012: LocalizeFile: Localized string not found for locale 'en_GB' try fetching for en_US(Seq 2261)
WARNING: DS012: LocalizeFile: Localized string not found for locale 'en_GB' try fetching for en_US(Seq 2262)
WARNING: DS012: LocalizeFile: Localized string not found for locale 'en_GB' try fetching for en_US(Seq 2263)
WARNING: DS012: LocalizeFile: Localized string not found for locale 'en_GB' try fetching for en_US(Seq 2264)
WARNING: DS012: LocalizeFile: Localized string not found for locale 'en_GB' try fetching for en_US(Seq 2265)
WARNING: DS012: LocalizeFile: Localized string not found for locale 'en_GB' try fetching for en_US(Seq 2266)
WARNING: DS012: LocalizeFile: Localized string not found for locale 'en_GB' try fetching for en_US(Seq 2267)
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe CSXS Infrastructure CS6: Install failedIm having the same issue and the thing is that I even installed 2 times clean and keeps the same problem.
The weird thing is that the first time that I installed it it did a good installation. But now this is happening everytime. The thing is that I loosed a HDD and I had it runing already and now II cannoty install it succesfully.
HELP....!!!!
I have 4gb RAM
64 BIT W7
intel core 2 Duo CPU @ 2.80GHz
ATI RADEON HD 5700 SERIES 1GB
ASUS P5QL PRO
Exit Code: 6
Please see specific errors and warnings below for troubleshooting. For example, ERROR: DS003, DW050 ... WARNING: DF029, DW064 ...
-------------------------------------- Summary --------------------------------------
- 1 fatal error(s), 10 error(s), 4 warning(s)
WARNING: DW064: Memory requirements not met for {3D46121C-A0E6-4259-B7E0-5127C218A096} Adobe SpeedGrade CS6 6.0.0.0
----------- Payload: {9E0AF030-AC6B-11E0-8837-00215AEA26C9} Microsoft Visual C++ 2010 Redistributable Package (x86) 10.0.40219.1 -----------
ERROR: Failed to install Microsoft Visual C++ 2010 Redistributable Package (x86). Please try installing it by double clicking on the executable at "E:\Downloads02\S\ADOBE ****\CS6 Master Collection\Adobe CS6\payloads\Microsoft VC 2010 Redist (x86)\vcredist_x86.exe", or download and install the latest Microsoft Visual C++ 2010 Redistributable Package (x86) from Microsoft website - www.microsoft.com
----------- Payload: {CFA46C39-C539-4BE9-9364-495003C714AD} Adobe SwitchBoard 2.0 2.0.0.0 -----------
WARNING: DF029: ARKServiceControl::StartService: Service not started/stopped SwitchBoard. Current State: 0 Exit Code: 0 Service Specific Exit Code: 0(Seq 1)
----------- Payload: {F2F2F788-A17F-4CEC-A03C-DFB778E9D901} Adobe Media Encoder CS6 X64 6.0.0.0 -----------
FATAL: DS003: Cannot extract 'E:\Downloads02\S\ADOBE ****\CS6 Master Collection\Adobe CS6\payloads\AMECore6All_x64\Assets1_1.zip' to 'C:\Program Files (x86)\Common Files\Adobe\Installers\adobeTemp\{F2F2F788-A17F-4CEC-A03C-DFB778E9D901}'. Error: Error 0
----------- Payload: {AC76BA86-1033-F400-7760-000000000005} Acrobat Professional 10.0.0.0 -----------
ERROR: Error 1310.Error writing to file: C:\Config.Msi\46ea7.rbf. Verify that you have access to that directory.
ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
MSI Error message: Error 1310.Error writing to file: C:\Config.Msi\46ea7.rbf. Verify that you have access to that directory.
----------- Payload: {CA7C485C-7A89-11E1-B2C8-CD54B377BC52} Adobe Fireworks CS6 12.0.0.0 -----------
WARNING: DF012: File/Folder does not exist at E:\Downloads02\S\ADOBE ****\CS6 Master Collection\Adobe CS6\payloads\AdobeFireworks12-mul\OEM(Seq 2141)
----------- Payload: {05E1E278-7A8D-11E1-A0B9-FC0245DB7244} Adobe Fireworks CS6_AdobeFireworks12en_USLanguagePack 12.0.0.0 -----------
WARNING: DF012: File/Folder does not exist at E:\Downloads02\S\ADOBE ****\CS6 Master Collection\Adobe CS6\payloads\AdobeFireworks12en_USLanguagePack\OEM(Seq 76)
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe Premiere Pro CS6: Failed due to Language Pack installation failure
ERROR: DW050: - Microsoft Visual C++ 2010 Redistributable Package (x86): Install failed
ERROR: DW050: - Acrobat Professional: Install failed
ERROR: DW050: - AmericanEnglishSpeechAnalysisModels: Install failed
ERROR: DW050: - Adobe Premiere Pro CS6 Support: Install failed
ERROR: DW050: - Adobe Premiere Pro CS6_AdobePremierePro6.0en_USLanguagePack: Install failed
ERROR: DW050: - Adobe Media Encoder CS6 X64: Install failed
System Requirements -
I have the CS6 Master collection, several of the programs wouldn't open for a time but that was mostly solved by reinstalling them with the installer. The lone holdout was Premiere Pro. Not only has it resisted every solution I have gleened from reading these forums but it has survived a complete wipe and reinstall. I used the cleaner and everything. I'm at a loss of what to do. My error log is below. Every other program in the suite works except premiere. I even tried to simply use a premiere pro installer seperately from my master collection. Even worse results now it won't install at all as opposed to before where it installed and wouldn't open.
Solution please! I need premiere badly for a job.
Many thanks in advance to anyone who finds time to help me out!
Exit Code: 6
Please see specific errors and warnings below for troubleshooting. For example, ERROR: DF015, DW063 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 10 error(s), 0 warning(s)
----------- Payload: {CC006FD6-00EF-46FC-ACA0-7A28EFF44D20} Adobe Media Encoder CS6 6.0.0.0 -----------
ERROR: DF015: Unable to delete symlink "/Applications/Adobe Media Encoder CS6/Adobe Media Encoder CS6.app/Contents/Frameworks/amtlib.framework/Resources"(Seq 844)
ERROR: DW063: Command ARKDeleteSymlinkCommand failed.(Seq 844)
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Dynamic Link Media Server: Install failed
ERROR: DW050: - Adobe CSXS Infrastructure CS6: Install failed
ERROR: DW050: - Adobe Premiere Pro CS6: Failed due to Language Pack installation failure
ERROR: DW050: - AmericanEnglishSpeechAnalysisModels: Install failed
ERROR: DW050: - Adobe Media Encoder CS6: Install failed
ERROR: DW050: - Adobe Premiere Pro CS6 Support: Install failed
ERROR: DW050: - Adobe Premiere Pro CS6_AdobePremierePro6.0en_USLanguagePack: Install failed
ERROR: DW050: - Adobe CSXS Extensions CS6: Install failedErrors "Exit Code: 6," "Exit Code: 7"
Mylenium -
I foolishly installed a "better" version of the Azure tools foe VS2010 and now I get various error messages, including the one in the title of this post.
The error comes up when I simply create a new Cloud Web Role project.
When I compile I get these two:
WebRole.cs(5,30): error CS0234: The type or namespace name 'Diagnostics' does not exist in the namespace 'Microsoft.WindowsAzure' (are you missing an assembly reference?)
I "fixed" that one by removing the line which the wizard helpfully put in for me.
But this one?
------ Build started: Project: Eu_Label, Configuration: Debug Any CPU ------
C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v10.0\Windows Azure Tools\2.1\Microsoft.WindowsAzure.targets(1012,5): error : WAT080 : Failed to locate the Windows Azure SDK. Please make sure the Windows Azure SDK v2.1 is installed.
Done building project "Test.ccproj" -- FAILED.
But I've just installed the SDK!
http://www.ransen.com Cad and Graphics softwareI've tried both, the first link does not have anything for Azure VS2010 tools, as far as I can see. I may have missed something.
The second link does not refer to VS2010, and anyway links backt o you first link, as far as I can see.
http://www.ransen.com Cad and Graphics software
Hi Owen,
You could click the
Previous Versions in first link. And then you could select the matched version to your VS from the download (http://www.windowsazure.com/en-us/downloads/archive-net-downloads/
) page.
Please try it. Any questions, please let me know free.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Sync Failure - The following recurring event could not be synced
Hello from Olympic London,
My 9900 T-mobile (software 7.1.0 bundle 1149) and Desktop (7.1.0.32) are giving me hassle. When trying to sync Outlook I get Synchronisation Error - The following recurring event could not be synced: 01/01/1900 - HGT Band Practice. Remove the event and sync again. In the settings, I asked it to sync only future events. I OK'd the message but it recurs each time.I have deleted the recurring event from both BB and PC.
Sorry if this is an FAQ. I have searched for it.
Please be nice to the newbie!
EdwardI have the same problem on my Torch 9810 using AT&T. Not only has the event been deleted from both Outlook and the device, but it is also from March, more than the 3 months old most events are kept, and Outlook is also set to only sync future events. No future dates are now syncing at all. Someone please help!
-
am trying to sync my ipad with my computer and keep getting the following message: iTunes could not check for an update to the carrier settings in your ipad. an unknown error occurs (1631). what do I do??
The search bar can be very valuable...........
In using it, I found out other's have had this issue and it likely means you have a 3G iPad? If you do, go into settings and turn off cellular data, then try to update again and you should be OK........ -
When trying to sign in to the iTunes store I get the following message, "We could not complete your iTunes Store request. An unknown error occurred (5002). There was an error in the iTunes store. Please try again later." How do you resolve this? Has been going on for days now.
I started getting this message a couple of days ago.
Started a thread of my own before I saw your post. https://discussions.apple.com/thread/4660828 -
Has anyone a solution to two update having the following popup-"We could not complete your request". There was an error in the App store. Please try again later. I've tried over 4 days without any change.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting. -
I am trying to purchase mountain lion but I get the following message:
"We could not complete your purchase. The product distribution file could not be verified. It may bedamaged or was not signed." Any help?Installing the appropriate combo update may help...
If you are running v10..7 Lion, install the OS X Lion Update 10.7.4 (Client Combo)
For 10.6 Snow Leopard > Mac OS X 10.6.8 Update Combo
Then restart your Mac. Try the App Store.
If that doesn't help, try the following..
Quit the App Store if it's open.
Open the Finder. From the Finder menu bar top of your screen click Go > Go to Folder
Type this exactly as you see it here:
/Library/Preferences/SystemConfiguration
Click Go
Move the NetworkInterfaces.plist file from the SystemConfiguration folder to the Trash.
Relaunch the App Store and try downloading Mountain Lion.
You may also need to disable anti virus software and turn off the Firewall in System Preferences > Security (or Security & Privacy) > Firewall -
Error Message: The following disk images could not be opened
When downloading the free trial for CS6 for Mac, I get an Error message stating that "the following disk images could not be opened: Photoshop_13_LS16.dr invalid checksum.
Please help!!!Is there any messages within the Adobe Download Assistant? This error can happen if you try mounting the DMG before the download is complete.
-
When restoring and updating my iPhone I am getting the following message " iTunes could not update to the carrier settings for your iPhone.an unknown error occurred (1630).can anyone please with a knowledge tell me what I should do please. Thank you
The search bar can be very valuable...........
In using it, I found out other's have had this issue and it likely means you have a 3G iPad? If you do, go into settings and turn off cellular data, then try to update again and you should be OK........ -
When I quit Photoshop CS6, the following message appears:
" Could not save Preferences because the file is locked, you do not have necessary access permissions, or another program is using the file. Use the ‘Get Info’ command in the Finder to ensure the file is unlocked and you have permission to access the file. If the problem persists, save the document to a different file or duplicate it in the Finder."
If I try to change the Workspace in PS6 from Essentials to any other Workspace, the following messsage appears:
"Could not apply the workspace because the file is locked, you do not have necessary access permissions, or another program is using the file. Use the ‘Get Info’ command in the Finder to ensure the file is unlocked and you have permission to access the file. If the problem persists, save the document to a different file or duplicate it in the Finder."
I have checked the Sharing and Permissions section of the "Get Info" panel accessed from the Finder and I have set Read and Write Privileges for my user account for Photoshop CS6. System and Admin are also set to Read and Write.
I have a MacBook Pro with OS X Version 10.9.5 and have all available updates for Photoshop CS6, Lightroom 5 and Bridge CS6.
I tried uninstalling the program and downloading it again and reinstalling, but nothing changed.
Can you help?
Thanks,
cjpnmYou may get better help in Photoshop General Discussion
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll
If FINDER means Mac, read below (and try to give more information when asking a question)
Mac 10.9.3 workaround https://forums.adobe.com/thread/1489922
Enable Mac Root User https://forums.adobe.com/thread/1156604
-more Root User http://forums.adobe.com/thread/879931
-and more root user http://forums.adobe.com/thread/940869?tstart=0 -
Error: The e-mail server could not be reached when the system was trying to
Dear All,
I've configured the Mail Transport in Portal successfully with SMTP as MS Exchange Server and Third-party Mailing servers. But due to some licensing issues a new MS Exchange mail server have been setup replacing the existing ones.
And when i configure the Mail Transport in the system i get the below message on the eMail Window:
"Error: The e-mail server could not be reached when the system was trying to send the message!
javax.mail.MessaginException: 530 5.7.1 Client ws not authenticated
I've configured (all the steps) the same way as i used to before and restarted the server as well! Please let me know the issue to be resolved, the telnet to the mailserver is also successful. I've try'd searching SDN, didn't find the exact solution... any notes on this?
Thanks,
MSHi,
It will depend on your infrastructure, I am not sure and have limited knowledge on netowrks, but in my current landscape both the system were in same domain, but still i had to maintain proxy configuration.
Since it giving authentication error, it feel it could be proxy error.
Please refer below links which talks about same error :
http://java.sun.com/products/javamail/FAQ.html#smtpauth
Or else i think it is issue with port.
Regards,
Jigar Oza
Edited by: jigar oza on Jul 6, 2010 12:43 PM -
The following Nuget packages could not be installed in project~
When i create a new azure cloud service project in VS, the VS
process fails with dialog message. See this error,
Windows Azure Tools for Microsoft Visual Studio
The following NuGet packages could not be installed in project
WebRole:
Microsoft.WindowsAzure.Caching (version ?.2.0.0?: Value cannot
be null.
Parameter name: path1
WindowsAzure.Storage (version ?.1.0.0?: Value cannot be null.
Parameter name: path1
I wanted to upload image, but the forum give me a tip:
Body text cannot contain images or links until we are able to verify your account.
So I have to paste the error in post.
I installed the azure SDK2.2 and VS2013. Can you tell me how to set the Path and how to solve issue?
Thanks!
Regards,Hi,
I have faced a similar issue.
It seems the installation was broken.
Solution would be to uninstall both VS 2013 and Azure SDK.
And then re-install them.
Note: Some times azure SDK web platform installer gives errors after installing some components. on that case you might need to run the web platform installer again to install remaining components.
If you found this post useful, Please "Mark as Answer"
and "Vote as Helpful".
Best Regards, Tuan Khalib
Maybe you are looking for
-
Access 2010 field reports in SharePoint 2013 Cloud
I had this error in sharepoint 2010 but I was able to fix it with a system state module in IIS but in the cloud office 365 (sharepoint 2013) they will not fix this, is there any way to work around this Sorry, something went wrong Access Services 2010
-
Http server code 503 reason Service Unavailable explanation Service Unavail
Hi all I am trying to send data to a HTTP SITE. I am getting the following error. Could somebody guide me how to solve this. <?xml version="1.0" encoding="UTF-8" standalone="yes" ?> - <!-- Call Adapter --> - <SAP:Error xmlns:SAP="http://sap.com/xi
-
I have a large application (project) that has been deployed. I have a new application but want to be able to pull the old app into the new one. Im hoping i could just use some sort of includeProject and pass it a few variables. Is this possible? Than
-
Does anyone know how to move them to your home screen on the Z10
-
Where will new items in managed library go ?
I am meaning to ask this , supposed if i have ten photos in a project under ABC , i export three of them , delete them from aperture library , do some processing on them , and then drag them back to aperture . Will aperture store them inside the same