Error:The grouping element could not be determined for project

Hi,
When I am trying to issue goods for a project,I am getting the following error
"The grouping element could not be determined for project 1., plant 2., and MRP group 3.."
what may be the reason for this reason.
Regards,
Raju

Hi,
You are using Automatic Requirement Grouping in your project and there is some issue with the Material Master,please check the Material Master Views.
Muzamil

Similar Messages

"The Destination Directory Could Not Be Determined For Photo Delluxe 4.0"

I Downloaded Adobes Photoshop from thier Site.
When trying to install pdx401upus.exe,
it will open up the Installation Wizard and then I get the Following "Warning" Message....
"The Destination Directory Could Not Be Determined For Photo Delluxe 4.0"
it just gives me a box to check that says "OK", and then the Wizard Shuts down.
Im running an HP Computer with Windows 7, Tons of HD Space, Ram, Memory ect.
I love using Adobe Photoshop, but since I got this new computer,
my Adobe Photoshop install disc seemed to be too old (Windows 95),
and therefore would not load to my new Computer/Operating System.
Any pointers, Websites, Instructions would be greatly appreciated.
Although I'm not a "Computer Dummy" I know just enough to get me into trouble, so the simpler the instructions....the better.

I am sorry Wwotr but I have not observed a user who has successfully installed and used Photo Deluxe on Windows 7. Since Photo Deluxe we have released 10 versions of Photoshop Elements. I would recommend utilizing the trial of Photoshop Elements 10 and seeing if that will fullfill your needs. You can find more information at http://www.adobe.com/products/photoshop-elements.html.

Error the actual price could not be determined while executing CKMLCP

Hi!
we are facing the problem while executing CMLCP, the error message is "The actual price for 10VN000012/MHR could not be determined" ( error message number CKMLLA102).
Our scenarios is as below:
we have 4 activity types out of which activity type "MHR" are used only for Indirect activity allocaiton tracing factor that means all service costs from service cost centres will be distributed to production cost centres in the ratio of actual quantity confirmed for MHR activity type.
for this activity type we will not have any actual cost distribution, so there will not be any actual cost for this activity type.
So, as actual quantity is confirmed during production process and while executing CMLCP is expecting actual price for the same ( we are executing KSII for actual activity price calculation before costing run). is there any enhancement to avoid this error, because our client don't want to allocate cost to this activity type.
regs,
ramesh

Hi Ramesh,
Message CKMLLA102 is standard system behaviour when the actual
price of an activity is zero because cost center accounting does not
allow actual prices to be zero.
Unfortunately the system can't distinguish an actual activity price
of zero from a not yet calculated activity price, so for activities
with actual price zero the message CKMLLA 102 is sent.
Have you check the SAP note 361379?. It provides you some options to overcome
the issue.
Best regards,
MLM

The Organizational Data could not be determined. Inform system admin

Hello All,
I am able approve PO from EBP, but getting this error 'The Organizational Data could not be determined. Inform system admin' when trying to appove PO from Universal Work List (portal) or when I try to open the work item via Busines Workplace (SAP GUI). Can anybody tell me if there is any config missing? or any suggestions to resolve this issue.
Any kind of help appreciated and rewarded.
Thanks,
Shekar

Hi Chandra,
Please check the Purchasing Organization and Purchasing Group in PO if they are not populated then this error is triggered. Please also check the user settings whether Purchasing organization information is maintained or not.
Regards,
Ravi G

Error :the specified module could not be found --oci.dll : Oracle9i

hi ,
i m trying to connect thru my java code to the oracle on my system ,while creating the DSN it gives the error
"the specified module could not be found" for the file oci.dll.
earlier it was not able to look for the sqresus.dll which i copied to the winnt/system directory , and after this oci error is coming , anyone knowing it please guide
with regards,

Make sure it is the same version of 9i (i.e. 9.0.x or 9.2.x) for both OO4O and ODBC. Also make sure that the ORACE_BASE\ORACLE_HOME\BIN directory is in your search path AND last, check your windows directories and subdirectories for duplicate copies of OCI.DLL (or anywhere else on the PC for that matter). Sometimes MicroSoft will include one and it is usually an OLD one.

The merge process could not allocate memory for an operation; your system may be running low on virtual memory. Restart the Merge Agent.

I encountered this problem on our SQL2012 and I have tried different scenarios (see below) to no avail. I have decided to give up and check if someone here has encountered this and resolved it.
One thing I know, it's not a memory issue. Both servers we're using has lots of memory to spare and we monitor the memory as the replication goes through it's steps.
I hope someone can help me on this. Thanks!
The Error:
The merge process could not allocate memory for an operation; your system may be running low on virtual memory. Restart the Merge Agent.
Our Scenario
We're using SQL Server 2012 SP1. All subscriptions are pull based.
We're using direct Merge Replication (not FTP or web sync)
We already have 10 active replications with larger databases. Only 1 has this issue.
Database size is less than 5 GB
Rebuilding the publisher is not an option.
What have I tried?
There is no memory problem --- we have lots to spare
I have tried re-initialization of the database. Same problem.
I tried deleting the database and reinitializing it. Same problem
New snapshot. Same problem.
I tried changing the subscriber server but still same issue.
MCP, MCSD, MCDBA (ANXA)

Here is the result for the sp_configure on our subscriber. We're doing a pull on the server with the issue.
name
minimum
maximum
config_value
run_value
max server memory (MB)
128
2147483647
2147483647
2147483647
In addition, I made a comparison between the working servers and the one with the issue -- there seems to be a difference in the service pack. Publisher has none but the subscriber is operating on SP1. But still strange as only 1 database is affected.
MCP, MCSD, MCDBA (ANXA)

PY error message - EE's salary group could not be determined for Plan Life

We are running through Payroll errors when there is a Separation action being carried :
u201DEmployeeu2019s salary group could not be determined for plan LIFEu201D.
On IT0168 the costs are u20180u2019
This has to be resolved ASAP. Any inputs/ advise is greatly appreciated.

During the "Separation" action, does the employee change WT on IT0008?
If so, it could be that the Life Plan's Calculation Base does not include that WT (and check the IMG under Payroll > Benefits Integration > Define WageTypes for Benefit Plans)

Can't determine the role of_. The group Adminsitrators could not be found.

WebCenter Content logs:
Warning,
can not determine the role of guest privileges. The group Adminsitrators could not be found. The exception error type 'java.lang.Throwable'. [Details]Content Server has generated a diagnostic warning. The following stack trace can display detailed information.
Another two warnings, the difference is that the guest replaced by admin, sysmanager.

What is the final destination of the download?
Firefox usually initially download the file first to the temp folder whole you enter the destination location and later tries to copy the file and possibly includes the permissions of the file in the temp folder.
It is possible that anti-virus software is corrupting downloaded files or is otherwise interfering with downloading files.
See:
*http://kb.mozillazine.org/Unable_to_save_or_download_files
*browser.download.manager.scanWhenDone

Error "codepage could not be determined for the receiver-system"

Hi,
we use the idoc-adapter to send message from mySAP ERP to PI.
All worked fine.
So, this morning I have changed the datatype of the messageId from "char" to "int" in mySAP ERP in the customizing menue (install param). So, no message received in SAP PI.
When I start transction "we05" in mySAPERP" I get the following error:
"codepage could not be determined for the receiver-system" status 02.
I have changed the datatyp to "char" but the same probleme
Can anybody help me please?
Regards
Stefan

This error shouldn't occur unless there is some modification at the OS level codepages.
Please check the entried in the RFC destination for connecting to the XI system. Unicode settings.
Regards,
Prateek

Error Log: The Billing Type Could Not Be Determined

Hi Experts
I have to produce the credit note sebsequent to the return. But I am getting the "Error Log: 0084001006 0000 The billing type could not be determined". Kindly help me with the solutions
Thanks and Regards
M.Dheerendar Jain

Hi,
Please check copy control VTFL for delivery and billing type
go through the routine 350 (VAT Determination) whteher it is applied in ite category.
if yes, then you have to configure the VAT Invoice type determination.
also maintain the entries in below tables:-
J_1IDCLSDET & J_1IBILDET
Even if the above entries are already maintained then check the supplying and receiving plant entries
for the billing.
To maintain entries in table go to t-code SM30.
and put the above table in the "Table/View" it helps to determine FVAT Invoice types
Invoice types determined based on supplying and receiving plant.
Kinldy check and confirm.
Thanks & Regards,
Rahul Verulkar

Alchemy for xfi - the product state could not be determined (error 6

as the title states I have xfi platinum & installed alchemy for xfi, tried to start it & I get "the product state could not be determined (error 60)" I click any of the links & it takes me to the buy page for the audigy alchemy. I've tried uninstalling & reinstalling multiple times, also uninstalled & reinstalled my xfi drivers. No change. I can enter anything into the entry field on the activation page & It'll advance me to the next page, then when it goes to connect to creative to register. I get another error. "an error occurred while attempting to connect to the internet. (00000)" I dont have anything blocked regarding this program & have tried with my firewall disabled. Please. Help

Well I didnt follow the link, but a kind person did download an update for Windows for me, if i can find link i will post it is from USA, took over 2 hours to install/update but appears to fix this problem, i now have all the bits that windows left out back on pc, so there is a solution out there, i know the site it came from there had been 80,000 downloads in over 2 days.

Withholding tax -number could not be determined for numbering group ID0017

While positing the FB60 transaction with withholding tax for country Indonesia, the below error is coming:
A number could not be determined for numbering group ID0017
Message no. 7Q630
"The system could not determine a certificate number for the numbering
group.
Withholding tax types exist that are relevant to numbering. The system
cannot determine a certificate number because the Customizing settings
are incomplete.
Sysem Response
Payment cannot be made.
Procedure
Check the number ranges in the numbering group."
Already seen the wothholding tax number range and it is coorec. Please advise how to resolve.

Dear,
Please check whether you have assigned the number range to the number group in the below setting
Spro
Financial Account Global Setting> Withholding Tax> Extended Withholding Tax> Posting> India> Remittance Challan> Assign Number Range to Number Groups

IDoc type could not be determined for the IDoc

I am trying to Post the payment run through the transaction F110.
In the payment run log i get the following message:
"IDoc type could not be determined for the IDoc"
But in fact the IDoc is generated and it is displayed in We05.
I have configured the Message type PAYEXT-PEXR2002 and EUPEXR-IDCREF01 both for the partner.
Has anybody Idea about why this error is coming and how i can resolve this?
This is important because in Payment run log, they need to know the IDoc number generated for that run, else it may become difficult for user to identify which IDoc was created for a particular payment run.
Would appreciate if anyone can please help on the same.
Thanks & Regards,
Narayanan

Hi,
If you are paying the payment through F110, if the payment exceeds the limit what you are spefied in available amounts in FI12 screen. First Please check this screen.
still if you are having any problem
Check in the below path:
IMG- Financial Accounting (New) - Accounts Receivable and Accounts Payable - Business Transactions - Release for Payment - 1. Create Workflow Variant for Release for Payment
2. Assign Release Approval Procedure for Release for Payment
3. Define Users with Authorization to Payment Release
Thanks
Chandra

IDoc type could not be determined for the IDoc in F110

Dear All,
The below mentioned error is encountered by us in F110.We have check all the setiing and not able to find the solution for this error.
Now our heads has gone for a toss....can anyone kindly suggest what and where we have missed out.
The system is not creating the IDOC file.....
IDoc type could not be determined for the IDoc
Message no. B1090
Diagnosis
The IDoc passed to the ALE layer could not be processed. The specifications passed in the control record were not correct.
The basic IDoc type (field EDIDC-IDOCTP on the outbound side or EDI_DC-IDOCTYP on the inbound side)has not been specified for this IDoc.
The attempt to read the basic IDoc type from table EDIDO also failed. No table entry was found for IDoc type from field DOCTYP.
Procedure
Possible error sources:
- The calling program did not provide values for the fields specified above correctly. Make a note of the transaction in which this error occurred and consult your ALE administrator.
- The IDoc type is not known in your system and must be maintained.
Kindly do the needful.
Regards

If you want to create IDocs from the proposal run, outbound parameters (we20) with the 'Test' flag are required in addition.
see OSS note 504230 : Message EUPEXR forms the logical unit around the individual payment messages (PAYEXT IDocs). The E1IDRD1 segments contain the IDoc numbers of the payment messages in field DOCNUM. Segment E1IDRS1 contains check sums (total of all amounts, account numbers, bank numbers, number of payment messages). This information is provided for the EDI subsystem. Set up EUPEXR In Transaction WE20 for the partner profile for the house bank, create the outbound parameters for message type EUPEXR with IDoc type IDCREF01. If you want to create IDocs from the proposal run, outbound parameters with the 'Test' flag are required in addition.

Trying to update creative cloud, comes error: The installation program could not access the important files / directories. Try to run the installer again. (Error code: 43), please contact customer support. The same error comes updating Muse. Mac 10.9.5. W

Trying to update creative cloud, comes error: The installation program could not access the important files / directories. Try to run the installer again. (Error code: 43), please contact customer support. The same error comes updating Muse. Mac 10.9.5. What shall I do?

Alauda_positos I would recommend reviewing your installation log files to determine the exact directory which the installer is unable to access. You can find details on how to locate and interpret your installation log files at Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html. You are welcome to post any specific errors discovered to this discussion.
For information on how to adjust file permissions please see Error "Exit 6" or "Exit 7" | Install log | Read, write, system file errors | CS5, CS5.5 - http://helpx.adobe.com/creative-suite/kb/error-exit-6-exit-7.html.

Error:The grouping element could not be determined for project

Similar Messages

Maybe you are looking for