Error: The logical component X is still being used

Hi,
In Transaction SMSY, i want to delete a Logical Component. So, pre-condition is to check whether it is mapped to any Projects/Solutions. By right-clicking - Where used list , i have seen that it is mapped to a Project. So, in transaction SOLAR_PROJECT_ADMIN under tab System Landscape, i tried to delete the Logical Component but receiving the error message - The logical component X is still being used.
Please help.
Many Thanks,
Mohan.

Hello Mohan,
You can also solve this by using the "Replace Logical Component" button in the system landscape within SOLAR_PROJECT_ADMIN.
Thus you can replace all the occurances of the Z_ logical component by e.g. an existing standard SAP logical component.
Afterwards you will be able to delete your Z_ logical component in SMSY (or in LMDB from 7.1 SP9 on).
Best regards,
Peter

Similar Messages

HT4203 I have turned off the Data use on the I-phone 4s but am told by AT&T that data is still being used for applications. How is this possible. Can someone help me understand this. Thanks.

I have turned off the Data use on the I-phone 4s but am told by AT&T that data is still being used for applications. How is this possible. Can someone help me understand this.

I assume you are including the STIX font as part of your epub files?
Perhaps the folks who do this blog might be able to help -- they have done some work with font embedding:
http://www.pigsgourdsandwikis.com/2011/04/embedding-fonts-in-epub-ipad-iphone-an d.html

HT1391 Can a stolen Iphone be traced by using the serial number to see if it is still being used. I have had the handset locked but have been told it can be over ridden.

Can a stolen Iphone be traced by using the serial number to see if it is still being used. I have had the handset locked but have been told it can be over ridden.

No.
Contact yoru carrier. They may be able to blacklist it.

TS3772 On my iphone 5 i have two iTunes ID, one is no longer in use, but keeps asking for a password which I no longer have, whilst the other is still being used. How do I delete the old ID?

On my iphone 5 i have two iTunes ID, one is no longer in use, but keeps asking for a password which I no longer have, whilst the other is still being used. How do I delete the old ID?

Hello steveod2
The main thing to do is to sign out all services on your iPhone, like iCloud, iTunes & App Store, iMessage and FaceTIme. Check out the article below for more information.
iOS 7: If you're asked for the password to your previous Apple ID when signing out of iCloud
http://support.apple.com/kb/ts5223
Regards,
-Norm G.

Theft of phone and skype account still being used!...

Hi.
My wifes phone was stolen on th 19th of April during a camping trip.
We reported the theft to the police.
I have gone onto skype today, and the account is still being used.
My wife said the only two places skype is installed is on her stolen phone and on her laptop, which isn't on at the moment as she is at work!!
So whoever stole the phone is using the skype account right now!!!
I need to find out the IP addresses that have been logged against the user [Redacted for privacy] since the 19th of April.
I have tried to email support, but the contact form keeps giving an error, so please someone respond as soon as possible so I can relay info to the police please!!
Kind regards,
Glenn.

Hi, Glenn, and welcome to the Community,
These two commands, when entered into a chat window, may prove helpful:
/remotelogout
Sign out all other instances except the current one. This will also stop push notifications on all other instances.
/showplaces
Lists other instances where this Skype name is currently signed in.
Important: Always make sure you are using the latest version of Skype. Some of these commands may not be supported in older versions.
Here is a link to the original FAQ article:
https://support.skype.com/en/faq/FA10042/what-are-chat-commands-and-roles?
If your wife still has access to her account, she should consider signing on to her account details and removing any saved payment methods on file.
Skype does not release IP addresses except upon request from law enforcement agencies, who can file to receive this information via official channels.
Regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

DVD Burn problem. "Device error - the target device isn't suitable for use"

Hello everyone,
I initially had a lot of problems with PE8. However the nVidia driver update solved most of them.
Just thought it was important to report success as well as failure!
However one problem remains. I get the following error at the 96% mark while burning. "Device error - the target device isn't suitable for use". It is always at the 96% mark and the program is "compiling [something]" when this happens.
Having searched this site I notice that user rgferg posted a similar problem 13 days ago but was redirected to repost in a different place, but never did.
I have tried to burn a 1hr clip 4 times and every time I have selected the slower burn speed (8MB/s) as has been suggested. It seems that inferior media is a culprit, so I have bought some [quality] Verbatim DVD-R media to try in my Phillips SATA optical drive. I am sceptical this will work, but open minded nonetheless. I will give it a whirl when my computer has stopped capturing the VHS I am working on.
Each time the burn failed the disk was automatically ejected and the burn process had actually started and progressed perhaps ~40% or so.
This indicates to me that it is a drive sharing issue, rather than a media issue. Somewhere on this forum it suggests that I go through a 20+ step process and delete/disable every piece of software that can compete with Premiere among other things. IF I do this what do I burn with outside of Adobe? Do I have to get imgburn or whatever it was called? What if I like Nero? Nero 6 has worked great for me for 3 years.
So given I am willing to uninstall my old optical drive burning software, who out there can recommened commercial software that for them creates a painless Adobe burning experience with no errors or conflicts? Perhaps there is another solution that I did not see on this forum?
I am running Windows XP SP3. I have the latest nVidia drivers for my SLI GeForce 7600 GS cards. I have 3 monitors. RAID 0 SATA, 2GB RAM, Athlon X2 5400.
Justin.

OK been working through the list of 20 things Adobe recommends to fix DVD burn error. No luck yet:
system meets minimum requirements
Project size does not exceed disk capacity
successfully burned project to DVD folder -thus skip to step 8.
8. Using new blank media for burning
9. Try different media and DVD burners. Bought Verbatim DVD-R. Don't have another DVD burner. Adobe's supported burner list is VERY short, so of course mine is not on it.
10. Uninstalled Nero 6. Did NOT uninstall Acronis True Image workstation or Lightscribe. These do not access the drive unless I say so!
11. Have not yet disabled startup items and services. This will take a lot of work and will leave to last. Deactivated Spybot thus far.....
12. Disabled IMAPI CD burning COM
13. DMA if available already set. Haven't set this in BIOS yet. I already think it is, but will check next boot.
14. Updated DVD firmware
15. Already updated nVidia drivers
16. Don't have any other DVD drives to disconnect.
17. MPEG workaround. Will resort to if required.
18. Disable Autoplay? XP only has "prompt me each time to choose an action". I have set this for ALL file types.
19. Have NOT refreshed the DVD drivers in the registry. This step involves uninstalling PE8. Will leave this as last resort.
20. Visit forums to see if other have the same problem. Hi guys
So still working through some of the items above.
Can anyone direct me to advice on how to write the encoded files sent to the hard drive, or the VOB files that PE8 failed to burn to a disk? Will the former work with DVD menus?
What a process.
Stay tuned.
Justin.

Runtime error 429, activeX component cant create object while using netbet pro on windows 7 & 8.1 HELP!!!

runtime error 429, activeX component cant create object while using netbet pro
does anyone know what I could do to fix this problem??? netbet pro was't available for a while then it's back but has yet to run

What's netbet pro?
I'd recommend asking questions about third party applications in the vendor's forum, not a Microsoft forum meant for admin scripting.
EDIT: Ah, some gambling website...
Don't retire TechNet! -
(Don't give up yet - 12,950+ strong and growing)

Device Error-The Target Device Isn't Suitable For Use

I read this in another forum after I experience this problem. Hope it helps some of you. I encountered the problem when I was exporting my finished movie. I had added a few effects like transitions and menu makers as well as stop markers to my timeline. When I went to Share, Create Disc and was exporting to a folder on my drive so I can preview the movie before I actually burn it to a Disc. During encoding well after 50% it stopped and said "DEVICE ERROR-THE TARGET DEVICE ISN'T SUITABLE FOR USE". I tried a few things that were normal when trying to export.
1. Restarting.
2. Created a new folder.
3. A different drive.
4. A DVD-RW.
Nothing was working, so I turned to Adobe forums and others like it. I found that Stop Markers can cause problems as well as some menu markers. It advised to delete the markers and try exporting again. Sure enough it worked, it exported with no problem. But I didn't like that after watching to video and reaching the end it would go to the next chapter without going back to the menu like most DVD videos do after playing. So I restarted Premiere and added all my Stop Markers to the timeline and began to export the movie and it worked just fine. I'm guessing that it just needed to be deleted and added again later after doing a restart so the computer has a fresh cache. Restarting computer works well after 1 hour of editing.

Erwin - thank you for the tip. I have had the same problem and tried several builds as you have taking aroound 2.5
hours per build. Removing the Stop marker has enabled me to write to a directory, Still have an error with regard to the menu not automatically shoiwng. However, as I write, burning direct to a DVD to remove any copying problems..
Again, many thanks for your help.
Tony

Is code still being used

We have a large database, with many stored procedures, packages, functions and views that have built up over such a long time that we no longer know which code is still being used.
Is there any way of finding out if a procedure/package/view/function has recently been executed.
The only way I could think of was to take away the privileges and see who shouts... but that's probably not the best idea.

Find objects, that don't have other objects dependant on themDepending on how the database is used, this may or may not prove anything. Procedures that are called from SQL*Plus sessions or DBMS_JOBS wouldn't show up. Searching the text of your front-end application may be a chore as well.
A similar caveat apllies to trawling the cache. You'd want to make sure you didn't drop procedures that are run once a month or once a quarter or once a year.
In the absence of adequate documentation the only sound approach is to keep everything. Punishing your users - by removing their rights - for the incompetence of the support team is so wrong.
Why do you want to get id of somne procedures? They are not like tables, they don't take up much space. Procedures that are not run don't have reported bugs, so they don't generate much additional work. The only issue I can see is when you have to do global work e.g. upgrading the database or applying some generic fix. That is additional work, I agree, but that's the price you have to pay for not having properly documented applications.
We all do this (or rather don't do this) and we all end up having to do work we suspect is unnecessary but can't prove that's the case. Do we learn? Heck, no.
Good luck, APC

Have been unable to empty trash for the last 24hours, says it is being used by another task, how do I clear it. Thanks for any help.

Have been unable to empty trash for the last 24hours, says it is being used by another task, how do I clear it. Thanks for any help.

Generally when you get the resource in use error logging out or rebooting will take care of it. When a file just absolutely refuses to delete try restarting in Safe Mode (hold the left shift key after the computer restarts) and then empty the trash.

Is there a way to LIST OUT all of the active images that are currently being used on a page in Dreamweaver?

Is there a way to LIST OUT all of the active images that are currently being used on a page in Dreamweaver? Or do I have to click each one and write down the image name by hand?
Thanks!
LJ

Alternatively use a browser:
Use the Firefox Web Developer Toolbar
https://addons.mozilla.org/en-US/firefox/addon/60
Images > View Image Information
or the List All Images Add On for Firefox
https://addons.mozilla.org/en-US/firefox/addon/3688
or the Web Developer tools in IE8 (or earlier), F12 > Image > View Image Report

Error while burning dvd in pre 8.0 "device error-the target device isn't suitable for use."

I am trying to burn a dvd in premiere elements 8.0 but after 96% iam getting this error :
"device error-the target device isn't suitable for use."
I have tried all of these steps according to this link :http://kb2.adobe.com/cps/515/cpsid_51553.html.
System configration :
win vista 32 bit .
Processor :Amd athlon 64 dual core 2.60 ghz .
Ram :3 gb
Graphic card :nvidia geforce 6150 se .
Camcoder model number :JVC gz-hm320.
Format :.mts
Frame size :1920/1080
Frame rate :29.97.
Please look into this problem .
Regards
Manoj Khati

This is a user to user forum, not Adobe support... YOU look into things, based on advice other users are able to give
Things and Software to AVOID when authoring/burning a DVD
Read all links/sub-links to create a "best" burned disc
Start --> http://forums.adobe.com/thread/608660?tstart=0
#2 has WHY Explained http://forums.adobe.com/thread/607390
Plus a Microsoft note http://support.microsoft.com/kb/314060
And another note http://support.microsoft.com/kb/982116

File Error: The Specified file is open and in use by this or another app...

I have imported a string of pictures and dragged them into the FCP timeline. I render them and it renders a certain percentage then it stops and says "File Error: The Specified file is open and in use by this or another application."
After reading this, I quit out of FCP, restarted my computer, opened FCP, nothing other program, tried to render again and same thing happened. It renders part of it then the error message pops up, then I can render again and it will do another percent then it will pop again and so on.
Suggestions, or does anyone know why this happened? Thank you very much for your time.
A

okay - don't know where you've got your scratch disc set but hopefully it's to another drive other than your boot.
The same drive where your render files should be located, ie some drive other than your boot drive.
Can you copy the jpegs over to that drive into a folder.
Delete them from your tl, delete them from your proj. Save your project. Close fcp.
If they're on your boot drive - delete them.
Reopen fcp and Reimport them from the new location.
Sorry for all the steps - but we have no idea how you have configured fcp or your level of experience. Trying to cover all the bases ...

FILE ERROR: The Specified file is open and in use...

FILE ERROR: The Specified file is open and in use by this or another application.
I get this error when I import a .MOV created by Live Type. All applications, except FCP, are closed. I can reboot the computer and get the same thing. It happens when I try and "render all". Thanks.

It's probably either spotlight looking at the files, or some anti-virus program thinking your render is a virus.

Device error -the target device isn't suitable for use. Solution found!?

Hello everyone,
I have received the following error many times on my machine for different projects when trying to burn to disk and folders:
Device error -the target device isn't suitable for use.
I have multiple hard drives with ~60GB, 40GB and 12GB. I have tried to burn 4.7GB discs and folders and 8.5GB folders.
I have previously tried nearly ALL 20 troubleshooting items recommended by Adobe and have even changed to Verbatim media. None of these solved the problem.
What did solve the problem, EVERY SINGLE TIME, was freeing up hard drive space or reducing the length of the project.
You may look at the available hard drive space and THINK that you have enough. But you don't.
Perhaps the remainder of this thread could be used to discuss the disk space requirements for projects. I can't seem to crack the formula. I just keep deleting/archiving files until the project works. I have ordered some new big HDD's to be rid of this error forever.
Justin.

While it is certainly possible that diskspace is one factor in getting the dreaded "target device isn't suitable message" (usually after lenghthy processing), it does not appear to be the only one.
I got the message trying to burn a 3 minute video to a dvd on two seperate computers one running xp pro with 150Gb of spare disk space and one running W7 HP with 50Gb of spare space. Tryng to burn to a folder gave the same error.
To me, this pointed to something in the app, or the project, so firstly I deleted the disk menu...burn completed ok. Re-instated a menu (different one)....burn failed. Removed one scene marker and the stop marker......burn completed ok. Re-instated stop marker......burn failed
Am I missing something on the purpose of the stop marker?
There was nothing obviously wrong with the project, although I will admit that I am new to PRE but am not a complete novice to video editing.
The encoding process of the menu's (both passes) went ok, and it wasn't until it got to the "encoding media" phase that the error message appeared.
It would certainly seem that more illuminating error reporting would be beneficial in this case, but it would also seem to be worth trying changes to the menus or markers to see if that fixes the error message.

Error: The logical component X is still being used

Similar Messages

Maybe you are looking for