Error: The Message Broker is not initialized

In first step, I had created a domain with PointBase Pools. I have realized a small process with a Message Broker. Cool, it works.
Second, I had created a domain with Oracle Pool and like the first step, I had realized a small application.
With Oracle Pool, I have just the error message : "<The Message Broker is not initialized>"
Any ideas ? With the wizard, I have tested pools and created WLI tables.
I work with WLI SP4 and Oracle 9i.
Thx for your help !!

I resolved my problem.
In fact, When I have created a new domain with the wizard, I defined two server : one for console and wli and an other for ejb session witch is called by WLI EJB Control.
For a another test, I have created a new domain with a stand alone server.
After that, I add the server, pool and datasource with console admin and it works !! I have not the problem with message brocker.
I think my problem come from the wizard definition of a server who is not use by wli.

Similar Messages

J2ee connection error, "The Message Server did not respond within 60 sec"

Hi,
I am facing the error "The Message Server did not respond within 60 sec. Please check if the message server is running.." when connecting to J2ee through NWDS.
I am able to reach the index page via http://<ip address>:53500/index.html but yet unable to reach through NWDS.
I have tried various combinations of host and port names like:
Message Server Host : <ip address>, <host name>
Message Server Port : 3636, 3936
but still no luck.
I've also cross checked the value of message server port by navigating to http://<IP address>:53500/monitoring/SystemInfo too, it is 3636.
The telnet test (telnet <ip address> <port Number>) draws a blank window.
I know this problem has been posted again and again, but then I am unable to understand what is the solution to this.
Can someone please help me in resolving this issue?
Note: [link 1|Unable to Connect to the J2EE Server from Netweaver Developer Studio; & [link 2|Developer Studio:Exception:The message server did not respond within 60 sec; are already checked.

Hi Robin,
Although I still haven't received any info from my colleagues regarding the central instance..
Just a quick query, if we have NW04 we use 36** and if it is NW04S then we use 39** , is this the only difference for message server port?
If that is the case, as I mentioned earlier, I have tried both, and one gave me N/A(3936) while the other gave me 'message server did not respond' error(3636).
I have the message server host name & port , Enqueue Server Host name & Port and SDM PID and Port details with me..
Can this be anyway useful in establishing a connection?
Waiting for your inputs...
Best Regards,
Vinay

TS1368 I am unable to connect to the itunes store; I get the message 'Itunes could not be connected to the itunes store. An unknown error occured (-3212). Also when I plug my iphone in to the computer it doesn't ever pick it up

I am unable to connect to the itunes store; I get the message 'Itunes could not be connected to the itunes store. An unknown error occured (-3212). Also when I plug my iphone in to the computer it doesn't ever pick it up please help!!

same here no solutions

Why am I getting the message "project could not be prepared because an error occurred. (File already open with write permission)" when trying to share my imovie to media browser?

Why am I getting the message "Project could not be prepared because an error occurred. (File already open with write permission.) when trying to
share to the media browser? I have done this many times before and never got this message. This is very frustrating. Can anyone help me?

Hi
Error -49 opWrErr File already open with write permission
Trash the preference files while application is NOT Running.
Easiest way to find out if this is the problem is by:
• Create a new User-Account
• Log out of Your old one and into this
• Re-try iMovie
If it now works OK - then 99.9% the problem is iMovie pref. file that needs to be trashed.
from Karsten Schlüter
Some users notice on exporting larger projects from within iMovie that this operation is aborted with an 'error -49'
This issue occurs only on MacOs machines using 10.7x
try switching-off the Local Mobile Backup
in Terminal copy/paste
sudo tmutil disablelocal
Re-launch Mac
Yours Bengt W

HT203200 Movie Rental error - i keep getting the message "We could not complete your Itunes store request. an unknown error occured (-42110). There was an error in the Itunes store. Please try again later.... any help?

Movie Rental error - i keep getting the message "We could not complete your Itunes store request. an unknown error occured (-42110). There was an error in the Itunes store. Please try again later.... any help?

Perhaps try the "Error 3001," "-42110," or "5103" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
iTunes: Advanced iTunes Store troubleshooting

Upon sync or backup, I receive the message, "iTunes could not back up the iPhone "iPhone name" because and error occurred. I have deleted my backup file and tried another computer, with no success. Also, the bluetooth function stopped working.

Upon sync or backup, I receive the message, "iTunes could not back up the iPhone "iPhone name" because and error occurred. I have deleted my backup file and tried another computer, with no success. Also, the bluetooth function stopped working.

Hi, EJ13.
I see you are having issues with backing up you iPhone and have tried a couple troubleshooting steps. There are a couple more steps I could recommend in the article below.
iOS: Troubleshooting backup issues in iTunes
http://support.apple.com/kb/ts2529
Regards,
Jason H.

The messages program will not open due to an internal error

The Messages application will not open due to an internal error? I have reinstalled the OS and still have the same problem. Although the messages notifcation still works.

Look at the discussion here.

I keep getting the following error code message: We could not complete your itunes store request. An unknown error occurred (-9808). Help!

I keep getting the following error code message: We could not complete your itunes store request. An unknown error occurred (-9808). Help!

Try:
iTunes Store: "An unknown error occured (-9808)"

When I try to back up my phone, I get the message "ITunes can not back up IPhone because an error has occured". I have rebooted the phone and comp... ??

Trying to back up my phone before I upgrade the software to the IO7..... When I try to manually back up now to ITunes, I get the message "ITunes can not back up IPhone because an error has occured". I have rebooted the phone and computer. Any advise?

Close iTunes & navigate to:
~/Library/Application Support/MobileSync/Backup/
and delete everything in that Backup folder, but not the folder itself.

Error: The message could not be saved

I have pop up on the screen, or when i shut down, a message that says: Error: The message could not be saved. What is going on and what should i do?

ddragan wrote:
Try this if you are using an imap server:
http://www.inertramblings.com/2006/03/09/mailapp-and-courier-imap-the-message-co uld-not-be-saved/
There are lots of possible explanations if you're using an IMAP server, but I get the error when I'm using POP. Perhaps the new mail.app in Leopard will have sorted it out.
Martin

"ERROR the message could not be saved" message appears

Can anyone explain why a "ERROR the message could not be saved" message appears when I'm writing mail? It pops up for no apparent reason?

This error message appears if you have set the text encoding (Message > Text Encoding) to one that doesn't include a "special character" that is in the message.
Example: select "Western (ISO Latin 1)" for your new message. From the Character Pallet (Edit > "Special Characters...") add (by dragging, the insert button, or whatever) the Euro symbol € to the body of your message. Either wait for Mail to attempt to auto-save your message to drafts or try to do so manually.
Because the Euro symbol has no code point in the Western (ISO Latin 1) encoding, the message can't be saved & you get the not-so-informative error message. Change the encoding to Automatic, "Western (Windows Latin 1)," or any other encoding that includes the Euro symbol & the error won't appear.

My problems started with an error 50 message when trying to download bought films. After un-installing and downloading iTunes, a number of times, I still cannot open iTunes on my PC and keep getting the message "you do not have permission to open"

I have removed all spyware, anti virus software and removed all iTunes programs - as suggested by Apple. I still cannot open iTunes on my PC because of the message "you do not have permission to open this file, folder"
I have changed and checked all permissions to allow this but still get the same message.
iTunes is located on my C drive and I now do not have the neccesary permissions to open it.

Hey Chris-
It has been some time since you posted this message and I see you haven't gotten any replies, but I have the same issue and I was wondering if you figured out how to resolve it. Hopefully you were able to figure it out.

Error: The preference path does not exist

Subject:
Error: The preference path does not exist:
Oracle.Portal.Page(WWC-51000)]
I can not resolve this error.
Have you already experienced this error?
I'm sending more information below.
Regards, Dime
DETAILS:
========
ORACLE Product: iAS 9i EE, v1.0.2
Platform: RedHat Linox 6.2, kernel 2.2.18
HW Platform:
IBM Intellistation 6889, Intel P2 350MHz, 384MB
Problem:
After successful installation of the Application Server and data base creation, the installation of ORACLE Portal 3.0.6 is successful too, but the following message
appears when we try to access the URL http://servername:port/pls/portal30:
Error: The preference path does not exist:
Oracle.Portal.Page (WWC-51000)
About the Attachments:
- init.ora.original (the original init.ora file)
- init.ora.try1 (the file modified as described in the configuration guide)
- init.ora.try2 (according suggestions in the discussion group on
the ORACLE Metal Partners Site)
- install.log (install.log generated with init.ora.try2)
Regards,
Dimitar Indovski,
GORD Systems
ATTACHMENT-1 (init.ora.original)
db_name=DEFAULT
db_files= 80 # SMALL
db_file_multiblock_read_count = 8 # SMALL
db_block_buffers = 100 # SMALL
shared_pool_size = 3500000 # SMALL
log_checkpoint_interval = 10000
processes = 50 # SMALL
parallel_max_servers = 5 # SMALL
log_buffer = 32768 # SMALL
max_dump_file_size = 10240 # limit trace file size to 5 Meg each
global_names = TRUE
control_files = (ora_control1, ora_control2)
ATTACHMENT-2 (init.ora.try1)
db_name=DEFAULT
db_files = 80 # SMALL
db_file_multiblock_read_count = 8 # SMALL
db_block_buffers = 100 # SMALL
shared_pool_size = 3500000 # SMALL
log_checkpoint_interval = 10000
processes = 50 # SMALL
parallel_max_servers = 5 # SMALL
log_buffer = 32768 # SMALL
max_dump_file_size = 10240 # limit trace file size to 5 Meg each
global_names = TRUE
control_files = (ora_control1, ora_control2)
max_enabled_roles = 25
open_cursors = 50
compatible = 8.1.0
java_pool_size = 20
ATTACHMENT-3 (init.ora.try2)
db_name=DEFAULT
db_file_multiblock_read_count = 16
db_block_buffers = 550
shared_pool_size = 31457280
log_checkpoint_interval = 10000
processes = 100
parallel_max_servers = 5
log_buffer = 32768
max_dump_file_size = 10240
global_names = TRUE
control_files = (ora_control1, ora_control2)
open_cursors = 300
large_pool_size = 45000000
java_pool_size = 32768000
db_block_size = 8192
ATTACHMENT-4 (install.log.gz)
-----------------------------

Dennis
A general shared_pool_size Q&A is part of the Troubleshooting Guide on OTN: http://technet.oracle.com/products/iportal/htdocs/portal_troubleshooting.htm
The Configuration Assistant determines the shared pool size from the view v$parameter,
which lists information about the initialization parameters (populated from init.ora file). If the shared_pool_size value is more than 15728640 (for a default installation), you pass the minimal requirements set by the Portal Installer. Make sure you actually write out all the digits (i.e. 1000000000) and don't use abbreviations (1000M). Currently, the Configuration Assistant does a numeric check against the values that are set and cannot resolve the abbreviate syntax.
Also try running the sql [select value from v$parameter where name like 'shared_pool_size';] to check if the changes you are making in the init.ora is really getting populated in the v$parameter view. As long as you restart the database once you make the change in init.ora, it should take effect.
null

Error: The report source could not be retrieved from the state object.

I have been trying to create a report in a JSF page. The relevant parts are below:
Inside the JSP page, this is the code:
              <jsp:useBean id="MyBean" class="com.nm.facade.rto.POJOViewerBean" scope="session" />
                <jsp:setProperty name="MyBean" property="reportLocation" value="Report1.rpt" />
               <v:reportPageViewer reportSource="#{MyBean.reportSource}"
                                       displayToolbarPrintButton="true"
                                       printMode="ActiveX"
                                       zoomPercentage="100"
                                       displayToolbarExportButton="true"
                                       displayToolbarRefreshButton="true"
                                       viewerName="My Viewer"
               ></v:reportPageViewer>
In the backing bean, this is the relevant code:
    public Object getReportSource() throws ReportSDKException
        if (propertiesChanged || reportSource == null)
            propertiesChanged = false;
            if (reportLocation == null)
                throw new RuntimeException("The reportLocation property must be set before a report source is retrieved");
            ReportClientDocument rcd = new ReportClientDocument();
            rcd.setReportAppServer(ReportClientDocument.inprocConnectionString);
            rcd.open(reportLocation, 0);
            DatabaseController dbc = rcd.getDatabaseController();
            //Create the POJO collection and populate it with data
            ReportData[] data =
              new ReportData("B.B.", "King", 6, new Date(25, 9, 16)),
                new ReportData("Muddy", "Waters", 7, new Date(15, 4, 4)),
                new ReportData("John Lee", "Hooker", 8, new Date(16, 8, 16)),
                new ReportData("Otis", "Rush", 9, new Date(34, 4, 29)),
                new ReportData("Buddy", "Guy", 10, new Date(36, 7, 30))
            //Create the result set from the collection of POJOs
            POJOResultSetFactory factory = new POJOResultSetFactory(ReportData.class);
            factory.setVerbose(true);
            POJOResultSet results = factory.createResultSet(data);
            ResultSetMetaData metaData = results.getMetaData();
            //Set the resultset as the report datasource
                  //Get the table name from the 'Set Datasource Location' dialog in the Crystal Reports designer
            String reportTable = "getReportDataDataSource";
            dbc.setDataSource(results, reportTable, reportTable);
            IReportSource reportSource = rcd.getReportSource();
            if (reportSource == null)
                throw new RuntimeException("Unable to get a report source.");
        return reportSource;
In the CRConfig.xml, this is what is there:
<?xml version="1.0" encoding="utf-8"?>
<CrystalReportEngine-configuration>
    <reportlocation>../reports</reportlocation>
    <timeout>0</timeout>
    <ExternalFunctionLibraryClassNames>
         <classname></classname>
    </ExternalFunctionLibraryClassNames>
</CrystalReportEngine-configuration>
The report template 'Report1.rpt' is packaged under WEB-INF/reports in the war file.
When I try to generate the report by accessing the JSF page, I am getting an error: "The report source could not be retrieved from the state object. "
I am not sure what is wrong. Can someone help me in resolving this issue?
Edited by: renshai on Jul 9, 2009 3:21 AM

My formatting gets lost and the message looks unintelligible. After some experimentation, I found that if the message exceeds some length, the formatting is removed. Since I couldn't find any way to delete this post, I made another post with the same subject. Please ignore this post and help me to find a solution for the problem posted in the other thread with the same subject. Thanks in advance.

I have an Iphone 5S and used to sync it to my computer in the past without any problem, but now I can't and appears the message "usb device not recognized", and the cable is good and so the USB port. Do you have any idea what's the problem?

I have an Iphone 5S and used to sync it to my computer in the past without any problem, but now I can't, and appears the message "usb device not recognized", and the cable is good and so the USB port. Do you have any idea what's the problem?

Try leaving it plugged in and then restart the computer.
If you are on Windows this link may help but it is a bit old.
http://www.technologynext.org/error-usb-device-not-recognized-how-to-fix/

Error: The Message Broker is not initialized

Similar Messages

Maybe you are looking for