Error:The node does not contain any elements
Hi Experts,
I am getting this error.
The following error text was processed in the system SR6 : The node does not contain any elements. COMPONENTCONTROLLER.1.ROADMAP
The error occurred on the application server server6_SR6_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: RAISEELEMENT_NOT_FOUND of program CL_WDR_CONTEXT_NODE===========CP
Method: IF_WD_CONTEXT_NODE~SET_STATIC_ATTRIBUTES of program CL_WDR_CONTEXT_NODE_VAL=======CP
Method: WDDOINIT of program /1BCWDY/G25NECI0LTPP66VI3KOI==CP
Method: IF_WDR_COMPONENT_DELEGATE~WD_DO_INIT of program /1BCWDY/G25NECI0LTPP66VI3KOI==CP
Method: DO_INIT of program CL_WDR_DELEGATING_COMPONENT===CP
Method: INIT_CONTROLLER of program CL_WDR_CONTROLLER=============CP
Method: INIT_CONTROLLER of program CL_WDR_COMPONENT==============CP
Method: INIT of program CL_WDR_CONTROLLER=============CP
Method: INIT of program CL_WDR_CLIENT_COMPONENT=======CP
Method: INIT of program CL_WDR_CLIENT_APPLICATION=====CP
What is the problem here?
Thank you.
Lalitha.
(Assuming you have created elements for node...)
Definitely it is cardinality problem, please check that... Try to understand below points to avoid such error.
When a node is created in the context of a Web Dynpro component, the cardinality of the node is specified. The cardinality defines how often a node is to be instantiated at runtime u2013 that is, how many elements of this node are available at runtime.
u2022 1u20261 Only one element is instantiated.
u2022 0u20261 At runtime, no more than one element is instantiated, but it is also possible that no element is instantiated.
u2022 1u2026n n elements can be instantiated, but at least one element must be instantiated.
u2022 0u2026n The number of instantiated elements of the context node can vary.
The cardinalities 0..n and 1..n correspond to the declaration of an internal table. The cardinality 1..1 corresponds to the declaration of a structure.
Thanks,
Swanand.
Similar Messages
-
Context node does not contain any elements
Hi Masters,
I create a node dynamically from structure using CL_WD_DEMO_DYN_MODEL->create_nodeinfo_from_struct method. my code as
nd_field_info = nd_field->get_node_info( ).
wd_this->zwd_assist->create_nodeinfo_from_struct( EXPORTING
parent_info = nd_field_info
structure_name = dotablename
is_multiple = abap_true ).
When am set the data to context then it gives the error like node does not contain any elements, but i verified the attributes using nodeinfo then all attributes will be displayed, but when value inserting time it throws error.
Waiting for Your Response...
Advance Thankyou
Regards,
SathyaHi sathya ,
the method you using is absolute , the replacement for the methos is if_wd_context_node_info->add_new_child_node
pls refer the sample code to create a dynamic Node .
DATA: pa0001 TYPE REF TO cl_abap_structdescr,
comp_tab TYPE cl_abap_structdescr=>component_table,
struct_type TYPE REF TO cl_abap_structdescr,
ls_pa0001 ?= cl_abap_typedescr=>describe_by_name('P0001').
comp_tab = p0001->get_components( ).
struct_type = cl_abap_structdescr=>create( comp_tab ).
struct_type = cl_abap_structdescr=>create( comp_tab ).
* now the nodeinfo is created
node_info = wd_context->get_node_info( ).
node_info = node_info->add_new_child_node(
name = 'MY_NODE'
IS_MANDATORY = ABAP_true
IS_MULTIPLE = ABAP_true
STATIC_ELEMENT_RTTI = struct_type
IS_STATIC = ABAP_false
refer DEMODYNAMIC component for dynamic creation of node
regards
Chinnaiya P
Edited by: chinnaiya pandiyan on Dec 15, 2010 2:07 PM -
Dump showing that table does not contain any elements.
Hi All,
I have a table, with lead select.Based on the row selected, corresponding values of the row are filled in the input fields.
I filter the table and only those rows are displayed which has status "waiting". Now the problem is when there is only one row with status "waiting", and process it, its status changes to "done", as a result of which there is no row in the table, and i get following error:
Adapter error in INPUT_FIELD "IF_STATUS" of view "ZPWB.DISTRIBUTE_VIEW": Context binding for property VALUE cannot be resolved: The DISTRIBUTE_VIEW.1.PD_ITEMS_TAB node does not contain any elements
Can you please help out:)I have now the same problem.
somebody found out what the solution is for that issue?
if i have an empty context i get a dump due to the context binding. what is the work around? -
BI Publisher Word Template The report does not contain any data fields.
I have OBIEE BI Publisher report (10.3.4) working fine using BIP but using MS Word 2003 I want to create new template and want to add charts etc.
Step 1. In MS Word I successfully login Oracle BI Publisher as Administrator
2. Oracle BI Publisher -> Open (I open the report)
3. Go to Insert -> Table Wizard
I get this error:
The report does not contain any data fields. Please make sure that the reports generates data with the default settings or provide a valid XML file.
Please helpHi
How do I load XML data? Also why XML data load is required? Do I have to export XML data from BIP View screen and load from the same file from the word?
Please clarify
Thanks -
Update structure does not contain any elements error
Dear Friends in am a newbie in WDA. My Function Module has the following decalarations.
TABLES
*" U_P9006 STRUCTURE P9006
*" IT_P9006 STRUCTURE P9006
IT_P9006 is used to fill all the values in the Table, if the user wants to create a new entry in the table then he will click on the new button and U_9006 will be used to hold the new value and save in the database.
when i binded U_9006-EmployeeNumber to a Input box to accept values and tested the application dumps giving the error
"Adapter error in INPUT_FIELD "TC_1_EMPLOYEE_CODE" of view "ZHOLIDAY.MAINVIEW": Context binding of property STATE cannot be resolved: Node COMPONENTCONTROLLER.1.ZESS_EDU.1.CHANGING_1.1.U_P9006 does not contain any elements "
i have 3 basic questions please help me.
1. Currently the cardinality of the Node U_9006 is 0..n and Selection 0..1 , i reffered few sdn threads where it says change the cardinality to 0..n and issue will resolve , my issue is cardinality is already 0...n and even if i try to change it at the context tab it is not changing.
2. if map the INPUT BOX a String attribute ctx_employee rather than mapping it to the U_P9006-EmployeeNumber the page does not dumps , but how do i assign this ctx_employee value to the u_9006-employeenumber in the coding?
3. any sample of SAVE code so that on those lines i write SAVE coding and try to update the record.
Regards,
JackJack,
Bind_table , bind_element methods are used to insert records into NODE, not into database table.
As you said you want to insert records into custom infotype, you need to use function modules to create .
For infotype tables we use below function module to insert records
HR_INFOTYPE_OPERATION
DATA return1 TYPE bapireturn1.
DATA: wa_9006 TYPE p9006.
NOW PASS ALL THE VALUES OF WA_9006.
WA_9006-PERNR = LV_EMPID.
wa_9006-begda = " provide start date'
wa_9006-endda = ' provide end date
wa_9006-aedtm = sy-datum.
wa_9006-uname = sy-uname. ///LY PASS ALL THE VALUES OF P9006 TABLE( CHECK SE11 FOR FIELDS )
THEN CALL BELOW FUNCTION MODULE.
CALL FUNCTION 'HR_INFOTYPE_OPERATION'
EXPORTING
infty = '9006'
number = wa_9006-pernr
* subtype = wa_9006-subty
* OBJECTID =
* LOCKINDICATOR =
validityend = wa_9006-endda
validitybegin = wa_9006-begda
* RECORDNUMBER =
record = wa_9006
operation = 'INS'
* TCLAS = 'A'
* DIALOG_MODE = '0'
* NOCOMMIT =
* VIEW_IDENTIFIER =
* SECONDARY_RECORD =
IMPORTING
return = return1
* KEY =
Hope this will be useful
Regards
Srinivas
Edited by: sanasrinivas on Feb 13, 2012 12:28 PM -
I'm publishing an .fla in AIR for IOS.
I'm in CC 2014 so first I need to know which AIR should I publish in?
newest is AIR 14.0.0.178 for IOS
IOS deployment type is App Store
publishes with no error.
I see the following files included .swf and app.xml
I convert the .ipa to a zip file
Upload that thru the Application Loader I get the following error
The package does not contain an Info.plist.
Where is the infoplist for this and do I convert the .ipa and the info to a zip file?
I converted the .ipa to a .zip and the intoplist file is NOT THERE how do I generate this?
Any help here?Ok this is becoming very very frustrating as I have been at this for hours now. So the only way to explain this is to write what I did step by step as I have to be doing something wrong, just to recap:
I was publishing from Flash CC 2014 using AIR 14.0 and getting Digital Certificate is not valid message.
Was instructed to download new AIR 17 , I did this installed into Flash and used to publish.
I used my previous p12, app ID and distribution certificates all generated properly.
The file worked ONCE but I got an app ID error ( I understood I used the wrong app ID)
I changed it to the right app ID and the very next time and after 10 attempts I got the same error Digital Certificate is not valid
SO I then downloaded AIR 16.0
RE DID ALL MY CERTIFICATES AND P12'S
went to publish and I STILL GET THE SAME MESSAGE Digital Certificate is not valid -
Mysite Error - The site does not contain a default keywords termstore
I know this error has to do with the Managed Metadata Service. I recently had to delete my User Profile Service and Search Service, and then recreate new ones. Do I need to connect them to the existing Managed Metadata Service somehow?
I get this error when trying to change certain user profile columns in Mysites.Go to the list of shared services in Central admin, highlight the Managed Metadata Service Proxy and select the properties button from the Ribbon. You'll see four checkboxes. Make sure the one labeled 'This service application is the default
storage location for Keywords' is checked. Depending on the order of installation of services or if the Managed Metadata service is deleted and recreated this sometimes doesn't happen.
http://social.technet.microsoft.com/Forums/en-US/3cba2f1a-c1c7-4aed-b46e-6247f6a14e88/after-setting-everything-up-successfully-error-the-site-does-not-contain-a-default-keywords?forum=sharepointadminlegacy
http://technet.microsoft.com/en-us/library/gg750250%28v=office.14%29.aspx
http://donalconlon.wordpress.com/2010/06/30/managed-metadata-setting-the-default-termstore/
http://www.deliveron.com/blog/post/Define-the-default-Term-store-for-New-keywords-in-SharePoint-2010.aspx -
Managed System Configuration ! The table does not contain any data !
Hi,
In Sol Man Setup , Managed System Configuration, in phase 6 - Create Logical Componets -
There is no Product Version and Product Instance Available.
The message is : " The table does not contain any data "
How can correct this problem ?
ThanksHi,
while creating new Logical Component via SMSY , you need to specify Product first.
e.g. if you managed system is ERP 6.0 , select Product as SAP ERP
once you select Product , it automatically fetches information for product Version and Main Instance depending upon Product field input.
Please check and let us know if issue still persits.
Thanks,
Rupali -
Report painter execution error - GR657 - set does not contain any entries
Hello,
During our execution of report we are getting the below error:
Set 0102PCBT1IPROVDIV in set 0002$ZA13#######ROW0236 does not contain any entries
Message no. GR657
Diagnosis
You cannot use empty sets to define reports. The single-dimension set contains a basic set that does not contain any values.
Procedure
Use a set that contains at least one value, or enter values for the set defined.
This has been discussed in a similar Thread in May 2010 by puri & Praveen Jagdeesan,
However I am unable to trace the set & how to delete the blank values.
0002$ZA13#######ROW0236 or ROW0236 in the system.
Set 1IPROVDIV is exisitng in system.
Also when we go to KAH3 - Cost element hierarchy & see in the where used list we are not able to see the set being used in the report whereas the system from where we have exported the report we can see that this set is being used in the report.
Please could you help in resolving the same.Hello Murali,
Thanks for the reponse. But set 0002$ZA13#######ROW0236 is not available in system.
Please could you guide me on the same.
Thanks & Regards
Shreenath -
Error - The site does not contain a default keywords termstore
Getting the "The site does not contain a default keywords termstore" error in mysites (SharePoint 2010). The "This service application is
the default storage location for Keywords." box is already checked. Which from my Googling, is normally the fix.
Any ideas on what else i can try?Hi,
According to your post, my understanding is that you get an error in SharePoint 2010 My site.
Do you have more than one managed metadata service applications set as the default for the same web application?
If you have more than one managed metadata service applications, you can try to uncheck the “This service application is the default storage location for keywords” option for other managed metadata service applications.
If you have only one managed metadata service applications, you can try to delete this managed metadata service application and create a new one to test if it works.
For more information, you can refer to:
http://donalconlon.wordpress.com/2010/06/30/managed-metadata-setting-the-default-termstore/
http://technet.microsoft.com/en-us/library/gg750250(v=office.14).aspx
http://technet.microsoft.com/en-us/library/ee530391(v=office.14).aspx
Best Regards,
Yumi Fu -
Error: The folder does not contain a valid Flex Builder Project.
HI All,
My first Post here. I am new to Flex Hardly 10 days old. I
want to open the flexstore project in flex builder 3 and could not
able to do so.
What I did: file->import->.... got the error msg as
"The folder does not contain a valid Flex Builder Project".
also tried file->import->general->..... same error
msg.
I need your Help guys
I downloaded the sample project from
http://examples.adobe.com/flex2/inproduct/sdk/flexstore/srcview/index.html
Thanks in Advance
SAS
Text"shakeb66" <[email protected]> wrote in
message
news:gknbn8$av9$[email protected]..
> HI All,
> My first Post here. I am new to Flex Hardly 10 days old.
I want to open
> the
> flexstore project in flex builder 3 and could not able
to do so.
> What I did: file->import->.... got the error msg
as "The folder does not
> contain a valid Flex Builder Project".
> also tried file->import->general->..... same
error msg.
> I need your Help guys
> I downloaded the sample project from
>
>
http://examples.adobe.com/flex2/inproduct/sdk/flexstore/srcview/index.html
Try creating a new Flex project and dragging the files from
the zip into the
src folder. You may find that you need to rearrange things a
bit, depending
on how they set up the project, but this should get you
started.
HTH;
Amy -
Workbook does not contain any input-ready variables
Hello Experts,
We have one workbook which is not reacting when click on REFRESH or SHOW VARIABLE.
If clicked on VARIABLE screen it is throwing error "The workbook does not contain any input-ready variables" (screenshot attached)
Points I have checked are as below
1. If I create a new workbook by executing the respective query and refresh then it is working.
2. The file is in xls format and I have checked the USE XLS format under Global setting.
3. My Excel version is 2010. SAP version is SAPKW70105. BEx 7.X, support package 8.
4. It is not authorization issue otherwise the issue would have happened for the new workbook I created for testing.
5. Also I tested with user ID with SAP ALL access.
is there any way to repair the workbook so that it respond to Variable and refresh options ?
Thanks,
Gopi RWork book might be corrupted : As other said need to create / Recover Old work book
Refer Below Doc process For recovering a corrupted workbook :
How to recover a corrupt workbook. -
J1IEX post than made error like does not contain any selectable items
Respected Sir,
We have purchase the Goods From SEZ unit and it wil be treated as import made.
We doing the following activities
1. Prepared the Import P.O.
2. released the same P.O.
3. Doing the MIRO for Custome Vendor
4. Capture the J1iex
than we fins the below mention ERROR & Diagnoses and ERROR
Document 4400000016 does not contain any selectable items
Message no. M7064
Diagnosis
The document or document item entered cannot be adopted.
Possible reasons for this are:
u2022 The document items have already been processed
(Suggest zero lines indicator set?).
u2022 the document items have been deleted or are blocked.
u2022 the document items have been created for a different plant.
u2022 (for reservations only) movements are not yet allowed for the reservation items.
u2022 (for reservations only) the document items are retrograde components of the order. These are posted using the order confirmations.
u2022 A confirmation must exist for the document items.
u2022 The document items must be released first.
u2022 The document is an R/2 document.
Procedure
Make sure your entries are correct.
u2022 If the system has already processed the total quantity, you can set the Suggest zero lines indicator. The system will suggest the quantity zero for the items that have already been processed.
u2022 If you have entered a particular item, cancel the item. If you do not enter an item, the system searches all of the open items in the document.
u2022 If the document is a purchase order, production order or a reservation, you can
Kindly doneedfull above mention error
Thanks & Regards
Bipin ShahHI,
Please check whether all the vendor and excise details have been maintained in J1id. i.e Excise rate maintainance.
Hope this helps.
Regards,
Prasanna
Award pls if helpful -
Spool file does not contain any text when PDF is printed
When we print some PDF files via Adobe Reader, the printjob does not contain any text.
In Adobe Reader I can select the text but when you print it, it prints it as images (polygons records in EMF) instead of text (e.g. EMR_TEXTOUT).
Two questions:
How can we make sure that Adobe Reader always prints text?
On what is the decision based in Adobe Reader to print the PDF document as an image or as text?Well we are looking for this information, otherwise we would not have asked this question. I really hope to get in contact with a Adobe Reader printing specialist who could give us these answers.
There must be something that decides to print as image or with text.
E.g. Adobe Reader 9 often prints text compared where Adobe Reader XI doesn't print the text for the same PDF. -
"The stylesheet does not contain a document element" error
Hi,
I'm using Hyperion Financial Management 11.1.1.3
I successfully created intercompany transactions but when I select the "auto match" to perform the matching process, the running task page ensure that the process is completed successfully. However, when I press "log" I found the following error:
Error Number:-2147467259
Error Description:The stylesheet does not contain a document element. The stylesheet may be empty, or it may not be a well-formed XML document.
Error Source:msxml6.dll
Page On which Error Occurred:/hfm/Administration/ShowRunningTaskLog.asp
My environment is win server 2003 on a VM and EPM 11.1.1.3
Thank you and best regards,
Ahmed.Hi taku,
Yes I've solved my issue.
Firstly, make sure that the entities and accounts used in the Intercompany Transaction are allowed for ICP in the metadata file by setting the attribute "IsICP=Y" to yes.
Then, after you press the "Match" button, wait until the process finished and don't open the log. Just close the running task page, after the status showed that it is completed, and open the "process IC transactions" page again you will find the square sign becomes green which means that the transactions are matched.
I followed the following example on Oracle by Example [http://www.oracle.com/technetwork/middleware/financial-management/tutorials/mictrans-094190.html?ssSourceSiteId=otncn]
It's about "Managing Intercompany Transactions in Financial Management".
I wish you can solve your issue soon.
Best wishes,
Ahmed.
Maybe you are looking for
-
HT3924 Target Display mode screen direction
Can anyone advise on how to change the direction of screen link whilst in Target Display mode? My lap top sits to the right of my iMac due to the length of Thunderbolt. Screen link goes from right of laptop to left of iMac, would like to swap to left
-
I recently had my account expire, and need to utilize the trial to finish a project. Even though my account says 'free trial' the applications will not open. How do I get the APP to recognize that I'm in trial and not expired?
-
I have tried several ways to stop receiving the "Daily Manager" and it keeps coming. I am not able to end it through the eprint method. Help!!
-
Hi guys I just got my .Mac acount and now it's time to make a website on iWeb!!! I can do most of the things but I am really stuck about how to type in persian in iweb!!! I have had search and that's what I found: http://docs.info.apple.com/article.h
-
Anyone else having issues with iMac built-in microphone?
My mom's brand new 24" iMac (running the latest version of Leopard) keeps having issues with the built-in microphone going dead. It can be resurrected with a restart and PRAM reset (command-option-P-R), but it is kind of annoying to have to do this e