Error : The Project File can not be loaded

Dear all,
We have deleted the copernicus folder from my documents to remove cache.
But now while opening my project i see error message like this
please help!

Hi Horst,
Tried that not working.  Issue is that the file ".myproj" doesnot contain any data.
and one of the ABSL file also contains not data.
and if i try to refresh i get the error message "The solution was not opened correctly , please report incident to AP-RC-BDS-SOL.
This is very frustratating .
I have raised the incident with very high priority yesterday , but still no reply
I think if i check on web ui my solution is working fine so they just need to send me those files again then if i try things will be synced again.

Similar Messages

  • The project file could not be loaded

    a new windows 8.1, VS2013 install ... I use skydrive to sync all my source files to a folder named c:\skydrive. When I try to open a .SIN file from the c:\skydrive folder I get an error in visual studio:
    C:\Skydrive\c#\AutoCoder\AutoCoder.csproj : error  : The project file could not be loaded. The file cannot be accessed by the system.
      C:\Skydrive\c#\AutoCoder\AutoCoder.csproj
    When I right click the .csproj file in windows explorer I do not see a security tab. Not sure if my user is authorized to the file or not.
    How to open a project in VS2013 from my skydrive folder?
    thanks,

    Hi Steve,
    Generally we could open the project from the skydrive folder, I often use it. As you said that it doesn’t work in your VS, I doubt that it would be related to this project.
    Please delete the .suo file in your project folder, and then reopen the project file again (.csproje) again.
    If possible, you could run your VS as the admin, and then open this project.
    If still no help, maybe you could create a new project for it.
    http://stackoverflow.com/questions/11171322/how-can-i-recover-a-corrupt-csproj-file-in-visual-studio-2010
    Or you would contact the developer who created this project.
    Best Regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • The project file could not be loaded. name cannot begin with the '3' character hexadecimal value

    Hi, I get this error when I want to create a custom project (from Autodesk 3ds Max SDK 2014). I really dont understand the error, I dont use any '3' character in my project name

    Hi MegaJuzwa，
    Based on your description, it seems that it is not the VS IDE usage issue, am I right? If so, I'm afriad that it is not the correct forum for this issue.
    >>Autodesk 3ds Max SDK 2014
    It seems that it is the third party tool, if so, sorry for that it is really is out of support range of VS General forum. But I found that it also has his own support site. I suggest you post this issue to this forum:
    http://forums.autodesk.com/t5/3ds-max/ct-p/area-c1
    I also found the simliar thread in above site:
    http://forums.autodesk.com/t5/programming/getting-started-problems/td-p/4265618
    If I have misunderstood this issue, please feel free to let me know.
    Best Regards,
    Jack
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Unable to publish projects with inserted video - error message The Flash video can not be loaded

    I've created a project in Captivate 6 with two slides that have inserted videos in them
    Both the videos were created in Captivate 6 by publishing those projects as mp4 videos
    They play fine in the previews but when publishing I get the error saying the Flash video can not be loaded for both of those slides and in the output files the area for the video is blank.
    I have checked that the videos are not open anywhere else as I saw on a previous post this was the issue but the only place they are in use is in the project I am trying to publish.
    Below are my settings and the error message
    Any suggestions would be greatly appreciated.

    Your screenshot indicates you are publishing to a folder on a network drive.
    Have you:
    Verified whether or not the video file exists at the published folder location? (It should ideally be sitting in the same folder as the SWF that calls it.)
    Verified that the folder location is set up as a trusted location in your Flash Global Security settings?

  • Error - The registration of the service "User Profile Service" has failed. The user profile can not be loaded

    I am running an environment with an Active Directory and Terminal Servers.
    I have searched high and low for resolutions to this error but I cannot find anything related to my situation, let me explain further.
    The fixes I found are related to local users only.
    When I create a new user in the Active Directory I provide the paths to the profile folder in the "Remote Desktop Profile" and "Profile tab"  lets say for example \\ad001\home\%username% and \\ad001\profil\%username% .
    I give rights to the user to read/write the "home" folder which is mapped for folder redirection.  An I know that when the user first logs on it should create a "v2.%username%" folder upon successful logon.  This is when I am
    presented with the error message below:
    "The registration of the service "User Profile Service" has failed. 
    The user profile can not be loaded"
    Does anyone have any experience with this or know a suitable fix.  Again this is for the "Roaming" profile creation no local.
    Many thanks in advance.

    Hi,
    Thank you for posting in Windows Server Forum.
    Did you receive for any one user or for all users?
    Have you tried to solve the issue by fixing the user account profile?
    For that you can adjust the registry setting “ProfileImagePath” with
    particular SID of that user under below mention path.
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList
    Also if this can’t resolve the issue you can try to delete the SID of that user or renaming the old and and then check the result again by creating new profile for that users.
    More information.
    You receive a "The User Profile Service failed the logon” error message
    http://support.microsoft.com/kb/947215
    Hope it helps!
    Thanks.
    Dharmesh Solanki

  • When Syncing, got error msg "iphone4 can not be synced as the required file can not be found", When Syncing, got error msg "iphone4 can not be synced as the required file can not be found"

    i've upgraded to IOS5 and also my iMac to latest iTunes.
    i now found Itunes frequently issued a error during syncing "iphone4 can not be synced as the required file can not be found".   i have connected the iphone4 to my iMac using USB (i.e., wired).   but without doing any thing further, i go to iTunes and just hit the button to "SYNC" the iphone4 again, it will work.
    so, why am i getting that error usually first time around when i connect the iphone?

    Hi folks. Am REALLY struggling here and hoping for some help. I too am constantly getting the 'iPhone can not be synced' message since upgrading to a new MacBook and trying to sync my iPhone 3GS. Have tried updating to latest iPhone software and hasn't helped. Have tried all the stuff mentioned above (dumping that file etc) and no luck. When I go to my sync page for photos, even if i un-tick the sync photos option altogether, this error keeps appearing. Very odd and very frustrating. Can't sync - seems to stall at last step of the process every time.
    I'm guessing it is photo related as the pics on my iPhone are now all lowres and blurry, and it is asking for sync to iTunes to get high res images onto the phone.
    Also have problem going the 'other way'! WHen I go to iPhoto on Mac and try to download new photos taken on iPhone.. I keep getting the message 'The following file could not be imported. The file is an unrecognized format."
    help please
    Nick

  • I am having problems with the installation of Adobe Acrobat. I received an Error 103 the setup file can not be located. Can someone help

    I am trying to install Adobe Acrobat after I purchased the monthly membership. I did receive help but the after the installation is complete I receive error 103 which states that the setup file can not be located.

    Hi uniquenader,
    Did you encounter any errors during installation? Which OS are you using?
    Did you have any previous versions of Acrobat / Reader installed?
    Please use the Acrobat Cleaner tool ( Download Adobe Reader and Acrobat Cleaner Tool - Adobe Labs ) to remove the software completely,
    Re-download, reinstall and check.
    Regards,
    Rave

  • I can't share my Final Cut X project : the process does not start. it seems that the project files is not found by the application. why ?

    I crate a project on Final Cut pro X. A 52 mn movie, that works really good on the time line. But I can't export it on DVD or IPad or other devices. The process is engaed but without effective effect. After one hour no result. It seems that the "project" files is not physically recognise by Final Cut export routine. Is anybody had such a bad surprise ?

    Tell everyone what type of video (format) you shot in the camera, what are your project settings and exactly what settings are you choosing when you use Share.

  • Captivate 6 Video Issue: "The flash video can not be loaded. The input may not be proper"

    I've already published this particular project with multiple videos embedded with no problems in Captivate 6. I had to change one video and went to re-publish the project. Upon completing the publish, I receive an error message on EACH slide that has embedded video:
    "The Flash Video Can Not Be Loaded. The Input May Not Be Proper"
    There wasn't any issues with the project until changing the one video that needed to swapped out. I also tried publishing this in Captivate 8 to the same results.
    Specs:
    Windows 7 Pro
    Captivate Version 6.1.1.240
    Intel Core i5 25-20 CPU @ 2.5 Ghz
    4 GB RAM
    32-Bit Operating System
    If anyone knows why this issue has presented itself and how we can get around it, much would be appreciated!
    Thanks,
    Jon

    Hi there,
    Thanks for reaching Adobe Community. Please accept my apologies for the inconvenience.
    I am a little confused here. Are you getting this error while inserting a FLV video through Insert option or inserting a video through Video > Insert Slide Video or inserting a new slide?
    Re-linking means reinserting the video file. If you have already tried reinserting the video file, then have you tried inserting a different video?
    Also what operating system you have on your system?
    Thanks!
    Shekhar

  • HT201413 I am receiving a message saying the iPod "TRACER's iPod" can not be synched. The required file can not be found. I ran the iTunes program repair and restarted both the computer and the iPod. Any suggestions on what else to try?

    I am receiving a message saying the iPod "TRACER's iPod" can not be synched. The required file can not be found. I ran the iTunes program repair and restarted both the computer and the iPod. but still receive the same message. Any suggestions on what else to try?

    That can sometimes be caused by a damaged ipod photo cache.
    If you remove the current ipod photo cache, does that get you past the error?
    For instructions on where to find it, see the following document:
    iTunes: Understanding the iPod Photo Cache folder

  • The project file is not bound to source control, but the solution contains source control binding information for it.

    This may be more of a SQL Server Management Studio question, but I couldn't find a SSMS forum...
    I've got a database solution that contains several projects.  They're just to keep track of changes to stored procedures, triggers, views, etc in a few databases I maintain.  There is a problem with two of the projects though.  No matter what I do, I can't seem to get them bound to source control right.  When I open the solution, I get:
    The project file is not bound to source control, but the solution contains source control binding information for it.
    With two options, use solution binding and remove solution binding.  If I keep the solution binding, everything works fine.  But it's really annoying to have to deal with every time I open the solution.  If I remove the solution binding, the projects are now unbound again.  If I try to fix them (using the change source control or Add Selected Projects to Source Control options under the File->source control menu), I just end up in the same situation.  I've even tried deleting the projects and re-creating them from scratch, then re-adding them to VSS.  If I open the solution files in a text editor I can see the SCC tags in every project, but these two.  Since I can't manually add the tags, and Management Studio itself only seems to want to bind them the wrong way, I'm getting really frustrated.
    Can anyone point me toward a way to bind these so they work like the rest?

    However, that does not appear to be the ONLY cause of the problem.  I am a single user and only using TFS2010 and SSMS2008R2.  My issue is that I wanted a solution file for each project so that they could managed independently, and a super-solution
    file that contained all projects, so that I could perform system-wide searches and cross-checks.
    I solved the problem by:
    1. Choosing the option to use solution binding, then
    2. Adding another project to the solution.  This forced the re-write of the solution file.
    3. Adding another script to the project.  This forced the re-write of the project file.
    4. Checking in all changes.
    5. Deleting the new script and the extra project,
    6 Checking in all changes.
    This appears to have solved the problem.

  • How can I relocate songs from my Itunes? Itunes tells me that the original files can not be found! can someone help?

    How can I relocate songs from my Itunes? Itunes tells me that the original files can not be found! can someone help?

    punzete wrote:
    I can't do it that way. I erase these songs from the iTunes Library, but when I sycronize the iPhone, all these songs are copied again to the Library. Isn't there any way to stop that? Everything I buy on iTunes Store through my iPhone cannot be erased from the iPhone?
    WHY can't you do it the way 100 million people do it?

  • When I try to import pictures from media card to iPhoto, I'm getting the error 'The following file could not be imported. The file is in an unrecognized format.'  The file is a jpeg and I've never had this problem before.

    When I try to import pictures from media card to iPhoto, I'm getting the error 'The following file could not be imported. The file is in an unrecognized format.'  The file is a jpeg and I've never had this problem before.

    What version of iPhoto?
    What colour profile is the shot?
    As a Test:
    Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
    Import a few pics into this new, blank library. Is the Problem repeated there?

  • The audio file can not be changed! - help

    I really need help. I just installed Logic Express 8, and I tried to import a song in order to edit it (as a lead in music bed for a podcast). Every song I import in says I am unable to edit it - "The audio file can not be changed! Volume or file is locked."
    How do I unlock the file/volume in order to edit t? This is the only reason why I purchased Logic and if I cannot do this I spent a lot of money for no reason. Please help.

    OK, basics first..
    if the audio was 'bought' from itunes or some other download, it could have some kind of 'digital rights management' (DRM) on it. So you won't be able to edit anything, it's protected. Nothing you can do there.
    Also make sure it isn't already open in another application that might be 'holding on' to it.
    However, it could be something simple to do with protections on the file itself.
    Locate the music file you imported on your harddisk click on it once so it is highlighted, now press cmd-i, or select file menu and 'get info'.
    There are some settings here where one can 'lock' a file. There is a check box under the 'general' section that needs to be unchecked, there is also a 'permissions' section at the bottom of the 'info' window of the file.
    Make sure you have read and write permissions.

  • How do i get a radio station number from  down load the station tomy ipod, how do i get a radio station number from itunes it only plays on the computer i can not down load the station tomy ipod

    How do i get a radio station number from itunes it only plays on the computer i can not down load the station number as it does not show one to my ipod

    Which iPod? 
    iPod Manuals
    iPod Models

Maybe you are looking for