Error "The remote connection was disconnected because there are no Remote Desktop License Servers available to provide a license. Please contact the server administrator"
Hi,
I have been using Windows server 2012 at my company and generally take a remote access to this server. However, since last few days, I have been receiving the Error "The remote connection was disconnected because there are no Remote Desktop License
Servers available to provide a license. Please contact the server administrator".
My entire work has come to a halt because of this error as all my applications are running this server and their remote access is needed for my regular requirements.
I had tried one of the solutions proposed at one of these forums especially using gpedit.msc but to no avail.
Regards,
Aditya
Hi Aditya,
Thank you for posting in Windows Server Forum.
Agree with the words of armin, please verify that you have properly installed correctly. Verify RDS Licensing service running on License Server. Verify that the client, the RDS server, and the license server can communicate by ensuring that Domain Name System
(DNS) is configured correctly on each computer. You can run the ping command from each computer to each computer using the IP address, FQDN, and the NetBIOS name. If any of the ping commands fail, verify the DNS configuration on the network.
In addition, you can also try “GracePeriod” registry setting on this path (HKLM\System\CurrentControlSet\Control\Terminal Server\RCM) from
this article.
Hope it helps!
Thanks.
Dharmesh Solanki
Similar Messages
-
We are using Windows Server 2012 Standard installed in VMWare / Virtual machine and to access this we use vSphere client and Remote Desktop Connection / service was already enabled and was working fine with User PCs / laptops remote desktop into the server
2012, until it gave an error message of: Remote session was disconnected because there are no remote desktop license servers available to provide a license. Please contact the server administrator. whilst logging into the server.
We DON'T use Active Directory nor and we don't use domain and not looking to use it any-time soon.
I checked the RD Licensing Diagnoser and it says the grace period has expired and the licensing mode for the remote desktop session host server is not configured. I have checked the Remote Desktop Gateway has been stopped and I tried to start it and it
resumed to stop, here I assume its where the licensing part comes in to re-enabled this.
I have been trying to follow these articles online: http://ryanmangansitblog.com/2013/03/27/deploying-remote-desktop-gateway-rds-2012/ and http://www.concurrency.com/blog/rds8-add-a-licensing-server-2/#Install the overview part that I cannot get into,
because I think we have to be is AD DS for this which we don't. Is there a way around this for non domain / just standalone set-up? Is it a must / requirement we need to be in a domain in order for Remote Desktop Connection to work?
Also, we have a Windows Server 2012 RDS CALs - 10 (software and licence key), will the licence key work for the Windows 2012 Server Standard? We do not want to install the other Server mentioned which comes with CAL / licence key as its time consuming
to reinstall other programs. I have installed Server role service of Remote Desktop Licencing and automatically installed other associated services needed. in the RD Licencing Manager, the Server had a red cross and I "Activate Server"
where I followed: http://www.concurrency.com/blog/rds8-add-a-licensing-server-2/#Install in Install Licences section and I have used the licence key of CAL - 10 mentioned above; it stated I have successfully completed the install licences wizard and displayed:
10 Windows Server 2012 - RDS Per User CAL installed, and in the RD Licensing Manager the server turned into a green tick and added the licence.
I then tested the Remote desktop connection from my PC and the same error message was there and checked the RD Licensing Diagnoser and the same error messages was there. I haven't restart the services of Remote Gateway / the server itself; do I really
need to reboot server?
Any advice / guidance would be very much appreciated and this is a urgent matter.
Thank you for your time.Hotfix Released here:
http://support.microsoft.com/kb/2916846 -
Dears,
I have two windows server 2012 Data Center and I configured (Virtual Desktop Interface)VDI on it's.
All my clients connected on both of servers by used Remote Desktop sessions ,5 months since.
Currently,when the clients is connected on the both of servers they received the following error:
"The remote session was disconnected because there are no remote desktop license servers available to provide license"
Kindly note, I installed windows Licenses Server Data Center on the both of servers.
Regards.Hi,
Please let us know if you have purchased RDS CALs and install it in your RD licensing server.
Also, on RD Session host servers, please make sure that you have specified the license mode and point them to the RD licensing server.
Remote Desktop Services Client Access Licenses (RDS CALs)
http://technet.microsoft.com/en-us/library/cc753650.aspx
RD Licensing Configuration on Windows Server 2012
http://blogs.technet.com/b/askperf/archive/2013/09/20/rd-licensing-configuration-on-windows-server-2012.aspx
Hope this helps.
Jeremy Wu
TechNet Community Support -
Hi,
I am getting this error from windows server : remote session was disconnected because there are no remote desktop licence servers available to provide a licence. Please contact the server administrator.
Remote desktop Session Host Server Configuration Details:
The RD licensing Diagnoser(WIN-909xxxxxxxxxxx):
Number of license available for clients : 0
Remote Desktop Session Host server version: Windows server 2012 R2
Active Directory Domain : Not applicable
Licensing mode : Not configured
Now, Down I am getting this error as well shown by the system:
RD licensing Diagnoser Information- 2 errors:
Win-909xxxxxxxxxx : licensing mode for the Remode Desktop Session Host Server is not configured.
Win-909xxxxxxxxxx : The grace period for the Remote Desktop Session Host server has Expired, but the RD Session Host server has not been configured with any license servers. connections to the RD Session Host server will be denied
unless a license server is configured for the RD Session Host server.
Now my kestion is :
Do I need to buy a license key of the windows server to not getting this error or it may continue appear even if I purchased the license and not configure RDS and AD.
Do I need to configured only RDS and AD and buy the license key of windows server later because I still have 55 day of trial.
Do I just buy the RDS client access license (L).
Please could you help on this, am new in windows server?Hi,
As the message indicates, the grace period for the Remote Desktop Session Host server has Expired, you need to purchase and install RDS CALs. Also, you need to configure related settings
to continue using Remote Desktop Services. Otherwise, you cannot connect to the server remotely.
References:
Understand the licensing grace period
http://technet.microsoft.com/en-us/library/hh553157(v=ws.10).aspx
Install and issue RDS CALs or TS CALs
http://technet.microsoft.com/en-us/library/hh553159(v=ws.10).aspx
Remote Desktop Services Client Access Licenses (RDS CALs)
http://technet.microsoft.com/en-us/library/cc753650.aspx
Specify the Remote Desktop Licensing Mode on an RD Session Host Server
http://technet.microsoft.com/en-us/library/cc754487.aspx
Specify a License Server for an RD Session Host Server to Use
http://technet.microsoft.com/en-us/library/cc770585.aspx
Meanwhile,
1. AD is not required for RDS. However, it is recommended.
2. As you do not purchase Windows Server and related licenses as well, I suggest you contacting Microsoft sales or partner firstly.
How to buy Windows Server 2012 R2
http://www.microsoft.com/en-us/server-cloud/products/windows-server-2012-r2/buy.aspx
Best Regards.
Jeremy Wu
TechNet Community Support -
I am the Server Administrator and have server 2012 Standard running on a single computer for our small (50 employee) company. It's primary role is to house one software application that manages our data. Our employees need to remotely access this
server to use this software program. For the last 4 months we have successfully done that using Remote Desktop.
Unfortunately our RDS trial period ran out on our Server, and so I have recently installed 21 RDS User CALs on to the server to still be able to access this server remotely. When I installed them, using the Install Wizard, I selected 'User CALs' as that
is what they are. However, when I try to use remote desktop and access the server remotely, I get the message: "remote session was disconnected because there are no remote desktop license servers available to provide a license"
Do I have to install the RDS User CALs as Device CALs instead even though they are USER CALs?? Did I forget to check a box or something? Please help! We are a Non-Profit and really can't afford Microsoft's $260 support fee when I have a feeling
this has got to be an easy solution.Hi,
1. Did you create an RDS deployment or just install the RD Session Host and RD Licensing Role Services on your server?
2. If yes to #1, have you set the licensing mode and licensing server name in Server Manager -- RDS -- Overview -- Tasks -- Edit Deployment Properties -- RD Licensing tab? Did you make your RDSH server part of a collection? The RDSH server must
be part of a collection in order for the deployment settings to apply.
3. If no to #1, then please set the licensing mode/specify the licensing server name via group policy setting. For example, you could use gpedit.msc and configure the following settings:
Computer Configuration\ Administrative Templates\ Windows Components\ Remote Desktop Services\ Remote Desktop Session Host\ Licensing
Use the specified Remote Desktop licensing servers
Set the Remote Desktop licensing mode
Thanks.
-TP -
I recently installed 21 Remote Desktop Services (RDS) User CALs on my Server 2012 standard computer. It was an Open License donation from Microsoft as we are a non-profit. After installing them successfully (I installed them as USER and not DEVICE)
the warning message that my "remote desktop services will expire in 63 days" message no longer appears :) however, I can no longer connect to our server remotely. Our staff needs to access a single data management program on a daily basis and
that program is housed on our server computer.
I know that the solution to this is probably easy (like checking a box or installing a component). Can you please help? Why would we have been able to access the server remotely before the install of RDS User CALs and not after?
Thank you for your time and help in this regard.Hi,
Thank you for your posting in Windows Server Forum.
First of all the user which you want to provide access for remote session must be member of “Remote Desktop User” local group.
In regards to your error it seems that your RDS license server not able to locate the license server properly and licensing mode not configured properly. To resolve this issue you can try to change the Licensing mode or need to call the MS clearing house to
reactivate the license server in a correct mode. You must have all the license paper and all related document on hand and then call clearing house, explain them your issue and they will help you to reactivate it.
Please check beneath article for additional details.
Event ID 26: Your terminal services temporary client license will expire in N days (Only for reference as the link is for server 2003)
RD Licensing Configuration on Windows Server 2012
Hope it helps!
Thanks.
Dharmesh Solanki -
After a Installation from Windows 8.1/windows 7 everything works fine. For example Install updates and Software. If I connect the first time a remotefx card i can use RDP as well. But if i restart the host I get the mentioned error. What can I do. These
Hosts are not in a domain configuration. I tried it too but there was no difference. I didn't discovered any errors in the eventlog, too. Only an actviex error. But same errors occurs with a succsefull rdp session.
Also strange is if i start the vm without a remotefx card it works fine again. Only session with a Remotefx card aren't possible anymore.
Is there a bug or something. I tried it many times with the same error.
Maybe someone can help me.
kind regards
TobiHi Tobi,
Thank you for posting in Windows Server Forum.
For a workaround, please try to perform the two steps.
1. Do NOT enable RDP 8 on the Windows 7 SP1 VM. You should install RDP 8 and update the ICs though.
2. Change the connection setting on the client from "Automatically detect" to "LAN"
Please check again below thread for information.
a. "The remote session was disconnected
because there were network problems during the licensing protocol" after enabling RemoteFX Windows 8 VM
(Please recheck answer by “dgeddes”)
b. "The remote session
was disconnected because there were network problems during the licensing protocol" After Installing RemoteFX
Hope it helps!
Thanks,
Dharmesh -
I get an error when purchasing a TV Show. "Could not purchase... The network connection was lost. There was an error in the Itunes Store." I have not been able to purchase anything for over a week. I'm wondering what I have to do to get this resolved?
Dear Jody..jone5
Good for you that can't update your iphone because I did it and my iphone dosen't work for example I can't download any app like Wecaht or Twitter..
Goodluck
Atousa -
I love iTap Mobile. Paid for the app. Sorry to see them discontinue it, but now I know why. Microsoft bought them out! But even though free, I am getting an error: RPC Error: Your connection was denied because of a Resource Access
Policy (TS_RAP). Please contact your server administrator. (2147965402). I worked with iTap to fix this so I guess they sold Microsoft their older buggy code... Microsoft, please fix!
PS: This is the Android version. Mac and iOS are both okay.
EDIT: After an update a few months ago, iOS is no longer working. Not sure if the problem is related to the Android MSRDP issue.
UPDATE - Relevant posts (need Android RDP software engineer to fix):
Event Viewer Log when using Android client:
The user
"DOMAIN\testuser", on client computer "10.x.x.x", met connection authorization policy requirements and was therefore authorized to access the RD Gateway server. The following authentication method was used: "NTLM". (This
is most likely for logging into RD Web - icons shows up).
The
user "DOMAIN\testuser", on client computer "10.x.x.x", did not meet resource authorization policy requirements and was therefore not authorized to resource"localhost".
The following error occurred: "23002". (This is after clicking on any
of the icons).
I
think the Android MS RDP client is providing the incorrect resource. It shouldn't be "localhost".
It should be the RD Connection Broker's hostname, I believe.
Here's what it should look like (connected using a Windows PC going
through the RD Web portal via Internet Explorer):
The user "DOMAIN\testuser", on client computer "10.x.x.x", met connection
authorization policy requirements and was therefore authorized to access the RD Gateway server. The following authentication method was used: "NTLM".
The user "DOMAIN\testuser", on client computer "10.x.x.x", met resource
authorization policy requirements and was therefore authorized to connect to resource "rdsfarm.domain.com".
The user "DOMAIN\testuser", on client computer "10.x.x.x", connected
to resource "rdsfarm.domain.com".
Stephan,
Do you have any way to contact the software engineer who worked on the Android version of the RDP client? Please
have them read this thread. They need to fix the hard coded "localhost" resource to be a variable (namely whatever the user put in for the server).
This is why the MS RDP app is failing in situations where the FQDN for the RD Gateway and Connection Broker uses
the same host name.
Again, this is not a configuration problem on our end as it works as intended with the native Windows RDP client
as well as the Mac and iOS version of the mobile RDP client (all based on iTap Mobile's RDP app).
This is a problem specific to the Android RDP app.
PS: No matter how hard I try, the WYSIWYG editor is not very WYSIWYG at all, and so everything here looks messed up even though it looked right when I posted it (it is deleting new blank lines I'm inserting to make it spaced out and easier to read). See
below to read the post in context.Thanks for the bumps, everyone. I haven't check this thread in a while because I basically gave up on Microsoft's ability to respond. Unlike paid apps, there's no number to call or ticket to open when an app like this malfunctions.
Just to give you an update, iOS users started having issues connecting a few months ago. I don't remember what version started this. I'm not sure if it's the same problem.
Also, the newest version now gives a slightly different error message: RpcOverHttpEndpointException: 2, Your connection was denied because of a Resource Access Policy (TS_RAP). Please contact your server administrator.
For Android users, I am starting to recommend Xtralogic Remote Desktop Client. It's a paid app, but it works great. I don't know of any alternative for iOS.
MSRDP for Mac OSX (was also an iTap application) continues to work throughout the many updates.
We need a software engineer from MS to read my first post. All the information that will point to a fix is there. I strongly believe someone hardcoded the string "localhost" instead of using a variable to point to the FQDN of the rdsfarm
name.
Here's that info again (copied/pasted). It doesn't take an engineer to understand the issue. If you know how to decipher Event Logs, you can see where the problem is.
Event
Viewer Log when using Android client:
The
user "DOMAIN\testuser", on client computer "10.x.x.x", met connection authorization policy requirements and was therefore authorized to access the RD Gateway server. The following authentication method was used: "NTLM". (This
is most likely for logging into RD Web - icons shows up).
The
user "DOMAIN\testuser", on client computer "10.x.x.x", did not meet resource authorization policy requirements and was therefore not authorized to resource"localhost".
The following error occurred: "23002". (This
is after clicking on any of the icons).
I
think the Android MS RDP client is providing the incorrect resource. It shouldn't be "localhost".
It should be the RD Connection Broker's hostname, I believe.
Here's
what it should look like (connected using a Windows PC going through the RD Web portal via Internet Explorer):
The user "DOMAIN\testuser", on client computer "10.x.x.x",
met connection authorization policy requirements and was therefore authorized to access the RD Gateway server. The following authentication method was used: "NTLM".
The user "DOMAIN\testuser", on client computer "10.x.x.x",
met resource authorization policy requirements and was therefore authorized to connect to resource "rdsfarm.domain.com".
The user "DOMAIN\testuser", on client computer "10.x.x.x",
connected to resource "rdsfarm.domain.com". -
Hello All,
Good day. May I ask if anyone experienced this error when trying to access remoteapps in Azure? We are using IaaS and set-up RDS using Windows 2012 R2 but we are getting an error below.
"Your connection was denied because of a Network Access Policy (TS_NAP). Please contact your server administrator.
Various roles and services (Broker, Session Host, RD Gateway and Web Access are installed on each VMs).
Please advise.
Thanks,
GlennHi Glen;
Looks like the set up was not done correctly. Please follow the guidelines given on this
blog by Keith Mayer.
Regards;
Prasant -
Hello,
I am facing a problem from last some days..
When I am trying to open/create/update workflows from Designer 2010, then designer giving me an error "Unable to load workflow actions from the server. Please contact your server administrator".
I researched on internet for this error and found some possible reason like
Login user Permission issue
Error in custom actions
So that I checked for permission for login user, but it has administrator rights. and I tried to open workflow by removing custom activity code, but still exist.
also if I tried to create/update workflow for another site on same server then it works without any problem.
Can anybody please help me?
Many thanks,
Nitin
N i T i NHi NiTiN4u,
Thanks for your post.
First, here are some troubleshoot workflow error form Microsoft site:
http://office.microsoft.com/en-gb/sharepoint-designer-help/troubleshoot-workflow-errors-HA010237912.aspx#BM20
Second, have you tried to close the site and open it again in SharePoint Designer 2010?
Third, try to restart your IIS and share the results.
SharePoint 2010 -
Get message "loaded with errors on the target and was closed" but there are no errors in the vi.
Hi,
Attached image shows the error message which i receive when I try to run my vi. "vi loaded with errors on the target and was closed"
The vi has no errors as far as I can see and hasn't changed since I ran it a few days ago and it functioned fine. other vi's in the project run without any issue.
Any guidance to find the issue would be greatly appreciated!
Thanks,
Conor
Attachments:
Labview error.JPG 43 KBSome tips:
1. Try to recompile the VI which is "loaded broken" (ctrl+click on Run arrow). Deploy.
2. Try to recompile this VI and its dependencies (ctrl+shift+click on Run arrow). Deploy.
3. Try to recompile top-level VI and its dependencies. Deploy.
4. Change something in "loaded broken" VI (add some code, like reversing array back and forth, just to make LV recompile it). Deploy.
5. Close the project. Restart RIO. Open project. Deploy.
6. Close LabVIEW. Restart computer. Restart RIO. Open project. Deploy.
7. Take another computer. Deploy from it.
8. Close project. Clear compiled object cache (menu Tools -> Advanced -> Clear compiled object cache...). Open project. Wait until LV will open/recompile it. Deploy.
9. Do as 7, but in the meantime reformat RIO from MAX. Open project. Deploy.
10. Contact NI Support. Send them your project. Make them Deploy it.
The fun starts when you have project which deploys for 30 minutes... Usually I skip straight to step 8 then, and usually it helps. -
Hey,
I just tried redeeming my software online. I went through the whole process, got the password, and proceeded to get the software to download. But soon after, the wifi connection was disconnected, and when I tried to connect the ethernet cable, the entire software had disappeared from my launchpad. When I tried to restart the download, it kept saying that the password had already been used before, and that it could only be used once per computer. What do I do now?You shouldn't have to re-enter the code, Lion should be on your purchases list so you can re-download it. In the App Store, click Purchases... do you see ML there?
-
The network connection was lost on iTunes store
I´ve been trying to download some music but the itunes store reports a problem saying the network connection was lost. There was an error in the itunes store. please try again later.
Also I can´t sign in with my user and password.
What´s happening??
Thank youYou profile indicates you are running v10.6.7
If that is the case, updating your system software may help. Click your Apple menu icon top left corner of your screen. From the drop down menu click Software Update...
If your software is already up to date, try troubleshooting the connection.
Expand: Troubleshooting on a Mac here > Can't connect to the iTunes Store -
ITunes Store Error Message: "network connection was reset"
I've been having trouble connecting to the iTunes Store since Dec. 25, 2006. The last time I was able to connect to the site was Jan. 2, 2007!
The error message that I have been receiving is: "iTunes could not connect to the iTunes Store. The network connection was reset."
Here are the troubleshooting issues that I have already performed.
1) Ensured that my internet connection was active.
2) Checked to make sure Windows XP Service Pack Updates were compatible. No problems with the firewall detected.
3) Have the latest version (7.02.16) of iTunes.
4) iPod software is up to date.
5) Ran iTunes diagnostics which states:
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was unsuccessful.
The network connection was reset.
Connection attempt to iTunes Store was unsuccessful.
The network connection was reset.
Secure connection attempt to iTunes Store was successful.
Does anyone have this problem? Can anyone recommend a solution that worked for them?
Sony Windows XPPS: I also went into Internet Explorer...
Selected Tools, selected Internet options, then selected Advanced Tab
Then I looked for the security section and made sure that SSL 2.0 was selected.
I was still unable to access iTunes Store.
Maybe you are looking for
-
How to Configure an Cisco 5505 for PPTP VPN connectivity
I currently have a Cisco ASA 5505(ASA Version 8.2(1), and ASDM gui version 6.2) and a Windows 2008 R2 server with one NIC card. Currently the router is connected to the interent sucessfully using the 'outside' interface(devices connected to the 'insi
-
Report output getting truncated in email attachment
Hello Gurus, My requirement is to send a report output as an email attachment. I have done the coding for this but have a small problem. In the attachment the report is getting truncated after certain length. Can you advise wats the problem ? Regards
-
After effect CC - impossible de travailler avec Mocha AE
impossible de travailler avec mocha, une fois ouvert Mocha réponse fichier non trouvé. J'ai essayé avec des fichiers TIF TGA ou MOV aucun n'est reconnu par mocha AE CC
-
Problem dispalying arabic data !!
Hi there.. am having problem dispalying the arabic data coming from an html form in my JSP page; for exapmle, when i try to display the user arabic name from the request using: String name = request.getParameter("a_name"); the page displays: "???????
-
What should have in equal tnsnames,ora and listener.ora?
Hi forum members again I'm very new in oracle, and I'm trying to create a sucessfull net service name, using oracle net configuration assitant, but when I try to test it I got this error, .***"""ORA-12514: TNS:listener does not currently know of serv