Error :-The requested resource does not exist while opening the adobe form

hello Experts,
We are in Portal implementation face with ECC6 EHP4 and Portal EHP1
We have developed adobe  form using HCM forms and processes and done the required configuration in SPRO
When we are trying to open the form from ESS we are getting below error
404 not found
The requested resource does not exist.
Please look into this issue and let us know any thing we are missing
Sincerely
Paresh

is ADS working correctly?
1.  Use transaction SA38 to execute the program FP_TEST_00.
       Detailed information about this test program and about how you
       should then proceed is given in the Adobe Document Services
       Configuration Guide in the Help Portal under:
       http://help.sap.com/saphelp_nw2004s/helpdata/en/37/504b8cbc2848a4
       94facfdc09a359b1/frameset.htm -> Adobe Document Services
       Configuration Guide -> Configuring the Web Service -> Securing
       Access to the Web Service ->Configuration Check -> Configuration
       Check for PDF-Based Forms in ABAP
       -  If the FP_TEST_00 form is displayed in the print preview, the
          ADS configuration is correct.
          -> If you use scenarios with an interactive PDF, proceed with
          point 5. Otherwise, proceed with the test under point 6.
       -  If the system displays an error message instead of a form, the
          configuration of ADS is incorrect.
          -> Carry out the additional tests from point 2 onwards.
2.  Use transaction SA38 to execute the program FP_PDF_TEST_00.
    This enables you to check the RFC connection to ADS  (see the
    reference to the documentation given above).
       -  If the system displays the version number of ADS, the
          configuration of the RFC connection is correct.
read the note 944221
Please paste the whole error? Is any dump in ST22

Similar Messages

  • Web Dynpro image not found: The requested resource does not exist

    Hi everybody,
    I'm experiencing a strange Poltergeist, so I would like to cry out the issue and hope any kind sould could help me
    In my WebDynpro application, I show a JPG picture which is located in the own project, that means in "src/mimes/Components/metromadrid.net.formacion.Cursos". The image appears correctly in my Development environment, but when the activity is moved to the Consolidation System (I'm using JDI), the image doesn't appear. If I try to access it directly, via URL, the messagen shown is "404 Not found: The requested resource does not exist.." (the URL accessed is http://hostname:port/webdynpro/resources/metromadrid.es/formacionapp/Components/metromadrid.net.formacion.Cursos/foto_vacia.jpg)
    The point is that in the same Consolidation environment I have already some applications with images, which are found and loaded without any problem.
    I have checked if the image appears in the corresponding active repository and everything seems alright (I mean I can see the file there).
    Any idea? It would be really appreciated, since my time to solve the problem expires in few days...
    Thank you very much in advance!!
    Isidro Lopez

    Hi Isidro,
    your mime files were most probably not added to your NWDI activities when developing your Web Dynpro DC. This means when adding these mime files to the src/mimes/<comp package>.<Comp name> folder the Web Dynpro Tools have most probably not detected the new mime files. When testing your application on in your local development environment all images appear as they exist on your local file system. As missing mimes do not cause a CBS build failure you won't encounter a designtime error.
    Please check whether the corresponding mimes are listed as   'local only' (house symbol) in your DTR perspective. In case they are listed as 'local only' you must explicitly add them to an activity.
    I have also encountered this missing mime problem before but I have not started any investigation to really determine the reason for it.
    Best regards, Bertram

  • CRM Upgrade from 7.0 to EhP1 Error - The requested resource does not exist

    Hello All,
    We have recently upgrade our pilot system in CRM from CRM 7.0 to Ehp1. The upgrade was successful.
    However, when I login into the WebUI, I get an error message as follows:
    404 Not Found
    The requested resource does not exist
    Details: Go to main page of this application
    I got in touch with the Basis team and tried to activate some services through SICF that were deactivated because of the upgrade. But we still encounter the above error everytime I tried logging into WebUI.
    I kindly request to provide some pointers towards the resolution of the same.
    Thanks and regards,
    VSK.

    Hi,
    please try to activate all SICF services under sap->bc->bsp.
    If needed deactivate them and activate afterwards again to be sure all services are active.
    Good luck
    Kind regards
    Manfred

  • Need urgent help :'The requested resource does not exist error'

    Hi All,
    I am getting 'The requested resource does not exist error' when trying to acess http://machinename:50000/irj
    Even when i access http://machinename:50000, i get the same 'The root directory does not exist' error. I checked in visual admin, there is no other application deployed except my application.
    Any clues? Pls help
    thanks
    bhawna

    HI ,
    Did succeed to solve your problem. I am running into same problem.
    Any help is welcome.
    Thank u very much.

  • 404 Not Found,   Error: The requested resource does not exist.

    Hi all,
    When I try to access VC with the http://localhost:50400/vc where 04 is the CE1 instance, it returns the following error:
    404 Not Found
      Error: The requested resource does not exist.
    Any clues. Just to add that the CE1 servers are running green and nwa is accessible on same url.
    Regards.

    Hi
    Try with following link (VC should be in Caps) -
    http://localhost:50400/VC/default.jsp
    Also check whether you have proper admin roles assigned to your user id.
    Regards
    Sandeep
    Edited by: Sandeep Patki on Sep 16, 2009 8:47 AM

  • Error:  The requested resource does not exist. (Servlet)

    Hello,
    I created a simple JSP(submit form), that calls a servlet. When I run the JSP, I see the form. On submit, I get error screen:
    404   Not Found
    Error: The requested resource does not exist.
      Troubleshooting Guide https://sdn.sap.com/irj/sdn/wiki?path=/display/jsts/home
    Details: Go to main page of this application!
    The URL shows the path to the servlet (fully qualified name of the servlet class)
    http://<host>:50000/WebClient/<path>.ClientServlet
    Logs don't show anything...
    What am I missing here..,

    The servlet mapping was wrong in web.xml(missed the package.name)

  • 404 Not Found, the requested resource does not exist

    Hi gurus,
    We're faciing an issue where when we submit data back to the SRM shopping cart from the MDM catalog UI, we intermittently get a "404 Not Found, the request resource does not exist" error page.
    Below is the HTTP trace upon item checkout:
    POST     200     text/html; charset=UTF-8     https://server/webdynpro/dispatcher/sap.com/tcmdmsrmcat~uisearch/MDM_SRM_UI_App?sap-wd-cltwndid=0cf753a3797111dfa7c662676002500a&sap-wd-appwndid=0cf753a4797111df966b62676002500a&sap-wd-norefresh=X
    GET     (Cache)     application/x-javascript     https://server/webdynpro/resources/sap.com/tcwddispwda/global/SSR/js/autorelax.js?7.0103.20091012142306
    GET     404     text/html     https://server/webdynpro/resources/sap.com/tcmdmsrmcat~uisearch/Components/com.sap.mdm.srmcat.uisearch.master.Master/ProductForm30703.html
    GET     (Cache)     text/html     https://server/webdynpro/resources/sap.com/tcwddispwda/global/SSR/html/blank.html?7.0103.20091012142306
    GET     (Cache)     application/x-javascript     https://server/webdynpro/resources/sap.com/tcwddispwda/global/SSR/js/autorelax.js
    GET     (Cache)     text/html     https://server/webdynpro/resources/sap.com/tcwddispwda/global/SSR/html/backprevention.html
    GET     (Cache)     text/html     https://server/webdynpro/resources/sap.com/tcwddispwda/global/SSR/html/backdummy.html
    GET     (Cache)     application/x-javascript     https://server/webdynpro/resources/sap.com/tcwddispwda/global/SSR/js/autorelax.js
    The page https://server/webdynpro/resources/sap.com/tcmdmsrmcat~uisearch/Components/com.sap.mdm.srmcat.uisearch.master.Master/ProductForm30703.html is where the 404 error is being generated. And this error is also intermittent, so some time, the page will load with GET 200, but other times, it will show GET 404.
    Does anyone know what this ProductForm#####.html does? The ##### is a numerical value that seems to be incrementing on every catalog submission back to SRM shopping cart.
    MDM build 03.69
    Thanks.

    Sudhanshu appreciate your quick responses and the intermittent error is what's troubling me as well.
    Let me run through the SRM SC scenario for example:
    1. In shopping cart professional > Add Item > SRMMDM Catalog
    2. In the SRM-MDM catalog > Add an item to cart > Checkout
    3. After checkout, is where the intermittent error comes. Sometimes, the ProductForm.html is generated without a problem, and the product data is returned to the SRM SC in line 1.
    4. When we're back in the SRM SC professional > Add Item > SRMMDM Catalog  to punchout to the catalog again.
    5. Again, in the SRM-MDM catalog > Add an item to cart > Checkout
    6. Boom...the ProductForm.html page generates a 404 error.
    The scenario is similar from SUS to MDM, where for example, the first (or second or third) MDM punch out works, then all of a sudden, the 404 error is generated and it's always at the ProductForm.html where the 404 code is given.  I have yet to find a pattern to see what triggers this 404 error. Sometimes the first MDM punchout will generate this 404 error. Sometimes it will work up to 4 or 5 punchouts before the 404 error is generated.
    I'm have our BASIS team do a thorough analysis at the portal level to look for errors and still waiting for SAP's response.
    Another interesting thing is that this ONLY  happens in our dev box. In our QA box, we don't see such a behavior.
    Thanks for your time!

  • GCWebservice not found (The requested resource does not exist)

    Dear expert,
    According to the following link, there is a standard web service allowing the update of xml file into portal :
    http://help.sap.com/saphelp_banking60/helpdata/de/45/485c1a5b875b3ee10000000a1553f6/frameset.htm
    The problem is that I get the message "  The requested resource does not exist." when I launch the URL http://<server>:<port>/GCWebservice/Config1?wsdl (where <server> and <port> are the server and port number for my portal).
    Please do you know how to assist on this topic ? do you know how we can access to the GCWebservice and eventually download it to the portal ?
    Thanks and regards

    Hi all ,
    Thanks for the replies .
    Shravan ,
    I pinged my XI and is working . we have already added 
    the IP Address and the host name , but the same error
    is coming .
    Anirban,
    Checked all the necessary services again as suggested
    by  you .
    Andreas ,
    > is to set the abap profile parameter
           LOCALHOSTFULL to the fqhn.
    Can you please let me know where to set the abap
    profile parameter "LOCALHOSTFULL" as suggested by you .
    Thanks
    Shikha

  • Alert Configuration : 404 Not Found The requested resource does not exist

    Hi all ,
      We are facing problem in Alert configuration and
      Alert Inbox . We are on SP14 service patch
      We are getting error as " 404 Not Found The requested 
      resource does not exist "
      We have activated all the necessary services in
      Tcode : SICF as mentioned in the config. guide
      We have executed the program :
      SXMB_ACTIVATE_ICF_SERVICES
      We have referred the SAP note : 750287 and tried to
      set the httpport as per the note but again we are
      getting error as "The page cannot be displayed" .
        We have checked the parameters in Exchange profile
      for httpport as well as for host also .
      Can someone please guide us on this . 
      Thanks 
      Shikha

    Hi all ,
    Thanks for the replies .
    Shravan ,
    I pinged my XI and is working . we have already added 
    the IP Address and the host name , but the same error
    is coming .
    Anirban,
    Checked all the necessary services again as suggested
    by  you .
    Andreas ,
    > is to set the abap profile parameter
           LOCALHOSTFULL to the fqhn.
    Can you please let me know where to set the abap
    profile parameter "LOCALHOSTFULL" as suggested by you .
    Thanks
    Shikha

  • The requested resource does not exist - EAR - Jsp

    Hy!
    Following a tutorial I'm trying to create a small application in the Developer Studio.
    I created a Table, an EJB-Project with an Entity Bean and a Stateless Session Bean, a Web-Project with a JSP-File and an EAR which I deployed. Now the JSP form should be available at http://[server-name]:50000/employee/view.
    But I get:
    404   Not Found - SAP J2EE Engine/6.40
    The requested resource does not exist.
    Details:     Go to main page of this application!
    "main page" is a link which refers to http://localhost:50000/index.html which is the SAP Engine Start Page.
    This is my first experience with sap netweaver. So I don't know where I should start to search for the problem or how to solve it.
    In the web.xml of the WebProject there is the following code for the servlet mapping:
    <servlet>
         <servlet-name>NewEmployee.jsp</servlet-name>
         <jsp-file>/NewEmployee.jsp</jsp-file>
    </servlet>
    <servlet-mapping>
         <servlet-name>NewEmployee.jsp</servlet-name>
         <url-pattern>/view</url-pattern>
    </servlet-mapping>
    This is the code in the application.xml of the ear which should make it possible to access the webproject under .../employee.
    <module>
         <web>
              <web-uri>EmployeeWeb.war</web-uri>
              <context-root>employee</context-root>
         </web>
    </module>
    Best Regards,
    Carina

    Hy!
    I tried several changes and found out, I just had to remove the ' / ' bevor NewEmployee.jsp in the jsp-file - tag.
    <servlet>
         <servlet-name>NewEmployee.jsp</servlet-name>
         <jsp-file>NewEmployee.jsp</jsp-file>
    </servlet>
    Now it works and I'm able to test the jsp. There's a form and after a submit a jndi-lookup is performed.
    Object ref=jndiContext.lookup("java:comp/ev/ejb/EmployeeService");
    It seems the EJB reference in the web.xml:
             <ejb-ref>
              <ejb-ref-name>ejb/EmployeeService</ejb-ref-name>
              <ejb-ref-type>Session</ejb-ref-type>
              <home>com.sap.bsp.EmployeeServicesHome</home>
              <remote>com.sap.bsp.EmployeeServices</remote>
              <ejb-link>EmployeeEjb.jar#EmployeeServicesBean</ejb-link>
         </ejb-ref>
    doesn't work, because I get:
    com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Path to object does not exist at java:comp, the whole lookup name is java:comp/ev/ejb/EmployeeService.
    Looking forward to a hint
    Best regards,
    Carina

  • Http-XI-File:  "The requested resource does not exist"

    i have a http-XI-File scenario, where i m sending a request from the HTTpClient application(i obtained that HTTPClientApplication from SDN itself), when i send the request, i receive a response in the internet explorer as
    "The requested resource does not exist"...
    help me

    Hi,
    Have You Entered Correct Input Parameters in the Client Test Tool ???
    Please Mention the Correct Server Port
    Regards
    Khanna

  • After log off "  The requested resource does not exist. " is coming

    hi,
    When I logoff from the portal (EP6.0 SP 13)i got yes or no options to logoff from the portal. When I click on the yes option I am getting
    404: Not found
      The requested resource does not exist.
      Details:   Go to main page of this application!
    Where i should get the logon page screen. Can any onehelp me.

    Hi,
    In configtool, there are to different place that you can change this parameter.
    If you change from
    cluster_data -> Instance_IDXXXXX
    It doesn't change the global configuration. You should change from
    cluster_data -> Global server configuration
    Where did you changed your parameter ?
    Regards
    Abdul.

  • The requested resource does not exist

    Hello!
    I have a programm, made in Visual Stuio2005(.NET). I installed the PDK for .NET and now i get this failure massage:
    The requested resource does not exist.
    Any ideas?

    Hi Guntram,
    Change link's url to some static url, like www.google.com and see if it works. If yes,
    then the problem caused by wrong url. Anyway, if you want to navigate between iViews
    developed in PDK for .NET I would suggest you to read this documentation:
    <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/go/km/docs/library/dotnet/pdk%20for%20.net/developer's%20Guide%20PDK%202.0%20for%20.NET/index.html">PDK 2.0 for .NET Development Guide</a>:
    1. Tutorials -> Tutorial 8: Implementing Object-Based Navigation
    2. Tutorials -> Tutorial 7:Client-Side Events and How to -> Portal Client-Side Events
    3. How to -> Portal Server-Side Events
    and in <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/developerareas/dotnet?rid=/lw/uuid/95628888-0d01-0010-7d97-f0d771999d0f">pdk 2.5 for .NET Development Guide</a>:
    1. How to -> Using the TabStrip Control ( TabStrip is available in PDK 2.0 too, but without the documentation ).
    Regards,
    Rima.

  • XISOAPAdapter The requested resource does not exist

    Hi all,
    I'm having a problem on a PI 7.1 DEV Server. Until last weekend everything ran OK.  The services were working with SOAPAdapter, but these stoped of working and the response to each request was "404 Not Found - The requested resource does not exist."
    Looking at the system what had happened, I found at the nwa - Configuration Management - Infrastructure - Application Modules that the XISOAPAdapter Web Module and the com.sap.aii.adapter.soap.ejb.jar EJB Module were not listed, both of them from the application sap.com/com.sap.aii.adapter.soap.app. The QAS and PRD PI System are working fine and the modules are listed correctly.
    Any idea of what can be wrong?
    Thank's a lot for your help
    Edited by: Juan Camilo Gonzalez on May 20, 2010 6:36 PM

    Re-deploy the XISOAPAdapter

  • "404 Error - The requested resource does not exist" found in portal for Collaboration room

    Hi Experts,
    I am trying to resolve this issue since a week but not able to solve it, so i need your help.
    The Problem is when i assign a collaboration room to a user, the room is assigned but when the user clicks on the room link it gives the "404 Error - The requested resource doesn't exist". But if a new room is created and give access to the user, the user is able to open the new room through the link and view the documents.
    The Unique thing about the error is, it doesn't occur for every user it happens with few users, since I am the super_admin I am able to view all the rooms without getting such "404 error" even for once.
    I have tried by setting up all the permissions to the room and also assigning Everyone role to the rooms, still the problem persists.
    I am unable to find a solution for this, so need your help.
    Eagerly waiting for your helpful replies.
    Thanks in advance.
    Thanks & Regards,
    Shumana.

    Hi
    Try with following link (VC should be in Caps) -
    http://localhost:50400/VC/default.jsp
    Also check whether you have proper admin roles assigned to your user id.
    Regards
    Sandeep
    Edited by: Sandeep Patki on Sep 16, 2009 8:47 AM

Maybe you are looking for