Error the service FWSRV of TMG 2010 on Windows server 2008 R2 Enterprise

Please help me about a issue of TMG 2010:
My company installed TMG 2010 on Windows server 2008 R2 Enterprise but it happen error " Due to an unexpected error, the service fwsrv stopped responding to all requests. Stop the service or the corresponding process if it does not respond, and
then start it again. Check for related error messages."
and " The Firewall service stopped because an application filter module C:\Windows\SYSTEM32\ntdll.dll generated an exception code C0000005 in address 0000000077A72F86 when function CompleteAsyncIO was called. To resolve this error, remove recently
installed application filters and restart the service."
I have reinstall but there error also appear again. My company use about 2000 clients access through TMG 2010.
i have try update windows and TMG latest but can not solved this issue.
i hope everyone help me as soon as. thank you so much.

 
HI Luis,
Not sure whether this will fix your issues however give it a try and let us know so that other can also provide suggestion.
Disable
Antivirus
Monitoring Tools / Hardware Diagnostics tools which comes with Server vendor
Try -
http://support.microsoft.com/kb/2649961
http://support.microsoft.com/hotfix/KBHotfix.aspx?kbnum=2649961&kbln=en-us
Ensure you have enough space for Log to be stored

Similar Messages

  • Sql server services give error the remote procedure call failed [0x800706be] in sql server 2008

    sql server services give error the remote procedure call failed [0x800706be] in sql server 2008.
    To resolve this issue, I executed the following mofcomp command in command prompt to re-register the *.mof files:
    mofcomp.exe "C:\Program Files (x86)\Microsoft SQL Server\100\Shared\sqlmgmproviderxpsp2up.mof".
    but it does not work.
    Plz give the exact soln to solve this error.

    sql server services give error the remote procedure call failed [0x800706be] in sql server 2008.
    To resolve this issue, I executed the following mofcomp command in command prompt to re-register the *.mof files:
    mofcomp.exe "C:\Program Files (x86)\Microsoft SQL Server\100\Shared\sqlmgmproviderxpsp2up.mof".
    but it does not work.
    Plz give the exact soln to solve this error.
    So when you tried starting SQL server service it gave the error right  ?  or when you click on SQL server services in SQL server configuration manager(SSCM) you get this error. Can you be more clear.  As far as I read your question it has something
    to do with permission. Close SSCM window and this time  right click on SQL server configuration manager and select run as administrator and check if you can see SQL server services
    Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
    My Technet Articles

  • To install Remote Desktop Services User CAL on Windows Server 2008 R2 Enterprise Edition with SP1

    Dear Sir,
    Presently we have installed Windows Server 2008 R2 Enterprise Edition with SP 1. And now i would like to install Remote Desktop Services User CAL on this server. I have 25 digit product key of Windows Server
    2008 R2 Remote Desktop Services User CAL (20). Downloaded this product key from our MSDN Subscriptions.
    Kindly suggest me how to install (CAL server with product key that i have) and configure remote desktop services on my above existing server also how to point other server with my CAL server.
    Thanks

    Hi,
    1. Install Remote Desktop Session Host and Remote Desktop Licensing Role Services using Server Manager.
    2. Open RD Licensing Manager (licmgr.exe), Activate your server, then install your license
    3. In RD Session Host Configuration (tsconfig.msc), set the Licensing mode to Per User and Specify your RD Licensing server name (itself).  If you want you may configure these two settings via group policy setting instead.  The path of the
    group policy settings is Computer Configuration\ Administrative Templates\ Windows Components\ Remote Desktop Services\ Remote Desktop Session Host\ Licensing
    4. You may point other RDSH servers to your RD Licensing server using RD Session Host Configuration or via group policy as mentioned above.
    5. Optionally you may consider installing other Remote Desktop Role Services such as RD Gateway, RD Web Access, RD Connection Broker, etc.
    -TP

  • Does the lnkfix_vista.zip work for window server 2008 R2 enterprise ?

    All icons on my exchange 2010 server show as .lnk, any icon I click on starts notepad... does the lnkfix_vista.zip work on Windows server 2008 R2 enterprise ?
    thank you.

    This issue because there is no SPN for the Front End pool FQDN. Rather than adding an SPN I just deleted my front end server from the topology builder and added a new one using the FQDN of the actual lync server and it worked fine.
    Also you can refer below link
    http://howexchangeworks.com/2013/07/creating-central-management-store-fails-while-publishing-lync-2013-topology.html
    Please remember, if you see a post that helped you please click (Vote As Helpful" and if it answered your question, please click (Mark As Answer).

  • Exchange 2010 on windows server 2008 r2 (VMware Virtual Machine)

    Hello All,
    I am trying to get an exchange 2010 test environment running.
    This is a virtual deployment on windows server 2008 r2 sp1 and the actual exchange install passes the initial requisite  checks, during the install it however fails on creating a hub transport tole with the following messages in the setup log.
    [ERROR] An error occurred with error code '3221685951' and message 'The remote procedure call failed and did not execute.'.
    [1] The following 1 error(s) occurred during task execution:
    [1] 0.  ErrorRecord: An error occurred with error code '3221685951' and message 'The remote procedure call failed and did not execute.'.
    [1] 0.  ErrorRecord: Microsoft.Exchange.Management.Deployment.ExsetdataException: An error occurred with error code '3221685951' and message 'The remote procedure call failed and did not execute.'.
    [1] [ERROR] The following error was generated when "$error.Clear(); 
    install-ExsetdataAtom -AtomName Server -DomainController $RoleDomainController
    " was run: "An error occurred with error code '3221685951' and message 'The remote procedure call failed and did not execute.'.".
    [1] [ERROR] An error occurred with error code '3221685951' and message 'The remote procedure call failed and did not execute.'.
    [1] [ERROR-REFERENCE] Id=AllADRolesCommon__ExsetdataServer Component=EXCHANGE14:\Current\Release\Shared\Datacenter\Setup
    [1] Setup is stopping now because of one or more critical errors.
    Any of you exchange gurus out there seen this before?
    Any help is much appreciated.
    Regards

    Hi ,
    I tried a Exchange 2007 SP3 install (over Windows 2008 R2 too) with the same error code message: "Error code
    3221685951. Remote procedure call"
    It occurs to me:
    1-The Schema master is in another site.
    2-There are two ISA Servers in between but I shut down the feature "Strict RPC compliance."
    Beyond that, I really don't know what to do.
    Luis Olías Técnico/Admon Sistemas . Sevilla (España - Spain)

  • Getting error while trying to install ADRMS role on Windows Server 2008 R2 SP1.

    Hello,
    I am trying to install ADRMS on Windows Server 2008 R2 SP1 (This machine also has domain controller and Exchange Server 2010 SP3 installed). But I am getting following error:
    Install-ADRMS : The configuration object is read only, because it has been committed by a call to ServerManager.CommitChanges().
    If write access is required, use ServerManager to get a new reference.    at Microsoft.Web.Administration.Configuration.SetDirty()
    Not sure what is causing this error. Any help to solve it would be appreciated.
    Thanks.
    Jigar Mehta

    Hello,
    I am trying to install ADRMS on Windows Server 2008 R2 SP1 (This machine also has domain controller and Exchange Server 2010 SP3 installed). But I am getting following error:
    Install-ADRMS : The configuration object is read only, because it has been committed by a call to ServerManager.CommitChanges().
    If write access is required, use ServerManager to get a new reference.    at Microsoft.Web.Administration.Configuration.SetDirty()
    Not sure what is causing this error. Any help to solve it would be appreciated.
    Thanks.
    Jigar Mehta

  • Problem with Terminal Service Performance Counters in WMI on Windows Server 2008 SP2

    I'm always getting Errors in the WMI Subsystem. The two classes Win32_PerfFormattedData_TermService_TerminalServices and Win32_PerfRawData_TermService_TerminalServices are not found by WMI.
    According to KB2512451 classes Win32_PerfRawData_TermService_TerminalServices  and Win32_PerfFormattedData_TermService_TerminalServices have been renamed in Windows Server 2008 SP1.
    Unfortunately in the WMI system they are still referenced, which produces Errors as you can see in the following log file.
    Excerpt from the WMIDIAG 2.1 log file:
    26757 15:36:08 (0) ** WMI MONIKER CONNECTIONS: ............................................................................................ OK.
    26758 15:36:08 (0) ** WMI CONNECTIONS: .................................................................................................... OK.
    26759 15:36:08 (1) !! ERROR: WMI GET operation errors reported: ........................................................................... 2 ERROR(S)!
    26760 15:36:08 (0) ** - Root/CIMV2, Win32_PerfFormattedData_TermService_TerminalServices, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    26761 15:36:08 (0) **   MOF Registration: ''
    26762 15:36:08 (0) ** - Root/CIMV2, Win32_PerfRawData_TermService_TerminalServices, 0x80041002 - (WBEM_E_NOT_FOUND) Object cannot be found.
    I'v tried to delete the two classes using wbemtest.exe started as Administrator but I get an error 0x80041024: Provider not capable of the attempted Operation.
    How can I get rid of these two errors in the WMI system?
    Markus

    Hi Markus,
    Did you refer to following KB and check if that HotFix will help you.
    The WMI repository is corrupted on a computer that is running Windows Server 2008 or Windows Vista
    Meanwhile, please check system log file if find some clues.
    By the way, did you install all necessary updates on the server 2008?
    If any update, please feel free to let me know.
    Best regards,
    Justin Gu
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Cannot install Office 2010 on Windows Server 2008 terminal server

    Hello
    I have a Windows 2008 terminal server which has Office 2007 Professional Plus on it. We want to upgrade it to Office 2010 Professional Plus.
    Following steps from Technet, I made sure all users were out of the terminal server, then selected "Install Application on Terminal Server", then ran the setup.exe file for Office 2010.
    The splash screen comes up for Office 2010 but then disappears and the install does not progress, although the setup.exe is still running in Task Manager. The "install Application on Terminal Server" window is still open, waiting for me to click
    Next, Finish or Cancel and nothing else happens.
    I also tried putting the server into install mode from command prompt and rebooting the server and re-attempting but no good.
    How can I go about troubleshooting this issue?
    Many thanks
    Luke Dunster

    Hi Luke,
    Are you  using a volume license version of Office 2010 for Remote Desktop Services/Terminal
    Services? I may be wrong but I think that only this version of Office 2010 will work on a Terminal
    Server. The Retail Version will just not work in this case.
    I had similar problem where I tried to upgrade from Office 2007 to Office 2010 on a Terminal Server (Windows
    2008) but wasn't successful with the upgrade/installation.
    Also take a look at this post: 
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/e09ee781-82c2-4399-85f4-1b90ae690ccb/office-2010-licensing-for-windows-2008-rdsterminal-services-pkc-ok?forum=winserverTS
    Jale01

  • Windows server 2008 R2 Enterprise Service Pack 1 - TCP/IP Registry settings

    I am facing the issue  while making TCP/IP connections. This issue is occuring sometimes and not usual.
    No connection could be made because the target machine actively refused it 127.0.0.1:8056.
    This issue is due to server has full backlog.
    Questions - Where to check the server backlog for TCP/IP requests?
    How to tune the TCP/IP requests? Do we need to add any registry settings? Impact of those settings?
    Any help is really appreciated.

    These ones may help.
    http://blogs.msdn.com/b/sql_protocols/archive/2006/03/09/546852.aspx
    http://support.microsoft.com/kb/328476
    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

  • Error starting forms and reports manageed servers on windows server 2008

    Everithing was ok during install and configuration steps, put forms and reports, run application, 2 days later, servers stoped and it has been impossible to start them:
    [2013-09-26T12:20:03.199-04:00] [AdminServer] [NOTIFICATION:28]
    [] [oracle.sysman.core.pagemodel.logmgmt.msgs.LogMessagesPageModel] [tid: [ACTIVE].ExecuteThread: '4' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: weblogic] [ecid: 09f1d44aa5c550d0:-67c617bc:1415b0acd1e:-8000-00000000000000c3,0]
    [APP: em] Falta la configuración de registro o no es válida para los destinos: /Farm_FormsReports/FormsReports/WLS_FORMS, /Farm_FormsReports/FormsReports/WLS_REPORTS
    any suggestions?
    weblogic 10.3.4
    forms 11.1.1.4
    windows server 2008 x64
    JDK :java 6u30 x64

    delete all, re-install all... ok

  • "Failed to connect to the service manager" when I try to add nodes to a cluster on Windows Server 2008 R2

    Hello,
    I get the following error message everytime I try to add a node to an existing cluster "Failed to connect to the service manager".
    I'm running Windows Server 2008 R2,
    Any ideas?

    Hi saeedawadx,
    Please run the cluster validation and post the error or warning information, in normal scenario the “Failed to connect to the service manager” issue often caused by the firewall
    or AV soft block the others node connect, please try to disable the firewall and AV soft then try again.
    The following related article will give more helpful tips,
    The case of the server who couldn’t join a cluster – operation returned because the timeout period expired
    http://blogs.technet.com/b/roplatforms/archive/2010/04/28/the-case-of-the-server-who-couldn-t-join-a-cluster-operation-returned-because-the-timeout-period-expired.aspx
    Trouble Connecting to Cluster Nodes? Check WMI!
    http://blogs.msdn.com/b/clustering/archive/2010/11/23/10095621.aspx
    I’m glad to be of help to you!
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Link to download the server 2008 r2 enterprise without service pack

    Hi,
    Please provide the link to download the server 2008 r2 enterprise without service pack
    Thank You!!

    Hi,
    Please check the below download links:
    Windows Server 2008 R2 Enterprise Edition x64 (Full Install) VHD
    http://www.microsoft.com/en-us/download/details.aspx?id=2227
    Windows Server 2008 R2 Enterprise Edition x64 (Core Install) VHD
    http://www.microsoft.com/en-in/download/details.aspx?id=18348
    Windows Server 2008 R2 Evaluation (180 days)
    http://www.microsoft.com/en-in/download/details.aspx?id=11093
    And we could refer to the download center for more information:
    download Center
    http://www.microsoft.com/en-us/download/default.aspx
    Hope this may help
    Best regards
    Michael
    If you have any feedback on our support, please click
    here.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Web Service Client(Console App) not working on Windows Server 2008 R2 Standard Edition

    I am trying to consume an ASMX Web Service in a console app, its working fine in Windows 7,Windows Server 2012 Standard,Windows Server 2008 R2 DataCenter,Windows Server 2008 R2 Enterprise, But its not working in Windows Server 2008 R2 Standard Edition which
    is the deployment server.
    I tried consuming the ASMX web service using Web Reference and Service Reference as well but its not helping. Its throwing up the following error,
    Message:There is an error in XML document (1, 331491).
    Inner Exception : System.Xml.XmlException: '.', hexadecimal value 0x00, is an invalid character. Line 1, position 331491.
    The scenario is that i call the web service and it returns me an XML i am not able to receive the XML on Windows Server 2008 R2 Standard Edition.
    Please provide suggestions on this I need to resolve this ASAP.

    Hi,
    This question is better asked here:
    http://social.msdn.microsoft.com/Forums/en-US/home?forum=asmxandxml
    Experts here are more familiar about it and they can give you more efficient suggestion.
    Thank you.

  • "Network Error - 53" while trying to mount NFS share in Windows Server 2008 client

    CentOS | Windows 2008
    I've got a CentOS 5.5 server running nfsd. On the Windows side, I'm running Windows Server 2008 R2 Enterprise. I have the "Files Services" server role enabled and both Client for NFS and Server for NFS are on.
    I'm able to successfully connect/mount to the CentOS NFS share from other linux systems but am experiencing errors connecting to it from Windows. When I try to connect, I get the following:
    C:\Users\fooadmin>mount -o anon 10.10.10.10:/share/ z:
    Network Error - 53
    Type 'NET HELPMSG 53' for more information.
    (IP and share name have been changed to protect the innocent :-) )
    Additional information:
    I've verified low-level network connectivity between the Windows client and the NFS server with telnet (to the NFS on TCP/2049) so I know the port is open. I've further confirmed that inbound and outbound firewall ports are present and enabled.
    I came across a
    Microsoft tech note that suggested changing the "Provider Order" so "NFS Network" is above other items like Microsoft Windows Network. I changed this and restarted the NFS client - no luck.
    I've confirmed that the share folder on the NFS server is readable/writable by all (777)
    I've tried other variations of the mount command like: mount 10.10.10.10:/share/ z: and
    mount 10.10.10.10:/share z: and mount -o anon mtype=hard \\10.10.10.10:/share * No luck.
    As per the command output, I tried typing NET HELPMSG 53 but that doesn't tell me much. Just "The network path was not found".
    I'm lost on how to proceed with troubleshooting. Any ideas?

    There are usully two aspect that come to mind:
    1. Syntax of mount command
    2. Mismatch of NFS versions
    Third reason is here
    http://blogs.technet.com/b/sfu/archive/2011/11/21/getting-network-error-53-network-path-not-found-quot.aspx
    Rgds
    Milos

  • Installing forms 11gr2 services on windows server 2008 r2 64 bit

    hello,
    I successfully installed on windows 7 64 bit my developer forms & reports 11gR2 with weblogic 10.3.5 , jdk 1.6.0_+.
    Now i want to install in it in windows server 2008 R2 64bit, to deploy the application i created as a test.
    Question.
    1. Can I used the same installation set up , step, procedure as the development mode by only changing the installation mode to production mode in windows 2008R2?
    1.1 Do I need to create domain first after install the weblogic or it is like the development mode that the FRM_installation will create its classic domain?
    2. Can I used it without the fusion middleware?
    3. It is compatible version for forms 11gr2 for Oracle Fusion Middleware 11g Release 1 (11.1.1.6.0) ? << doubted not compatible.
    4. It is valid if i only install weblogic server 10.3.5 without the fusion middleware? Am I or other clients can able to access it?
    5. It is will be a AS server even if without the repository creation?
    Note : i only need the forms&report server services to run our application on windows server 2008 R2 64 bit and compile respectedly.
    I ve done it with OAS 10g before but different procedures now since forms 11gr2 is using now weblogic server.
    Thank you very much.

    ... i want to install in it ... , to deploy the application i created as a test If you chose the "Development" install option during the installation of 11.1.2 you would have everything you needed to run your form. The only significant difference between the Dev and Deploy installation is the that in the Dev install type the Forms and Reports Servlets are deployed into the Admin server Managed server rather than creating a unique one for each. For local testing purposes, this should be sufficient for most cases. If on the other hand you need a full installation (Deployment), I would recommend that you choose this option, but be sure to also include the Builders. The Builders are available for both install types. I would not recommend attempting to have both install types installed together although it likely can be done. Having both installed would likely create confusion and difficulty during troubleshooting.
    Important point. If you choose the Deployment option and include the Builders during that installation, you do not need to start everything in order to run a form. All that is needed is WLS_FORMS. All other processes can be stopped if system resources is a concern. For an actual production deployment, it is recommended that you route end-user requests through HTTP Server, but this is not required unless you plan to use SSO or other feature that is managed through HTTP Server.

Maybe you are looking for