Error - The site does not contain a default keywords termstore

Getting the "The site does not contain a default keywords termstore" error in mysites (SharePoint 2010). The "This service application is
the default storage location for Keywords." box is already checked. Which from my Googling, is normally the fix.
Any ideas on what else i can try?

Hi,
According to your post, my understanding is that you get an error in SharePoint 2010 My site.
Do you have more than one managed metadata service applications set as the default for the same web application?
If you have more than one managed metadata service applications, you can try to uncheck the “This service application is the default storage location for keywords” option for other managed metadata service applications.
If you have only one managed metadata service applications, you can try to delete this managed metadata service application and create a new one to test if it works.
For more information, you can refer to:
http://donalconlon.wordpress.com/2010/06/30/managed-metadata-setting-the-default-termstore/
http://technet.microsoft.com/en-us/library/gg750250(v=office.14).aspx
http://technet.microsoft.com/en-us/library/ee530391(v=office.14).aspx
Best Regards,
Yumi Fu

Similar Messages

  • Mysite Error - The site does not contain a default keywords termstore

    I know this error has to do with the Managed Metadata Service. I recently had to delete my User Profile Service and Search Service, and then recreate new ones. Do I need to connect them to the existing Managed Metadata Service somehow?
    I get this error when trying to change certain user profile columns in Mysites.

    Go to the list of shared services in Central admin, highlight the Managed Metadata Service Proxy and select the properties button from the Ribbon.  You'll see four checkboxes.  Make sure the one labeled  'This service application is the default
    storage location for Keywords' is checked.  Depending on the order of installation of services or if the Managed Metadata service is deleted and recreated this sometimes doesn't happen.
    http://social.technet.microsoft.com/Forums/en-US/3cba2f1a-c1c7-4aed-b46e-6247f6a14e88/after-setting-everything-up-successfully-error-the-site-does-not-contain-a-default-keywords?forum=sharepointadminlegacy
    http://technet.microsoft.com/en-us/library/gg750250%28v=office.14%29.aspx
    http://donalconlon.wordpress.com/2010/06/30/managed-metadata-setting-the-default-termstore/
    http://www.deliveron.com/blog/post/Define-the-default-Term-store-for-New-keywords-in-SharePoint-2010.aspx

  • Uploading AIR for IOS thru Application Loader I get the following error - The package does not contain an Info.plist.

    I'm publishing an .fla in AIR for IOS.
    I'm in CC 2014 so first I need to know which AIR should I publish in?
    newest is AIR 14.0.0.178 for IOS
    IOS deployment type is App Store
    publishes with no error.
    I see the following files included .swf and app.xml
    I convert the .ipa to a zip file
    Upload that thru the Application Loader I get the following error
    The package does not contain an Info.plist.
    Where is the infoplist for this and do I convert the .ipa and the info to a zip file?
    I converted the .ipa to a .zip and the intoplist file is NOT THERE  how do I generate this?
    Any help here?

    Ok this is becoming very very frustrating as I have been at this for hours now. So the only way to explain this is to write what I did step by step as I have to be doing something wrong, just to recap:
    I was publishing from Flash CC 2014 using AIR 14.0 and getting Digital Certificate is not valid message.
    Was instructed to download new AIR 17 , I did this installed into Flash and used to publish.
    I used my previous p12, app ID and distribution certificates all generated properly.
    The file worked ONCE but I got an app ID error ( I understood I used the wrong app ID)
    I changed it to the right app ID and the very next time and after 10 attempts I got the same error  Digital Certificate is not valid
    SO I then downloaded AIR 16.0
    RE DID ALL MY CERTIFICATES AND P12'S
    went to publish and I STILL GET THE SAME MESSAGE   Digital Certificate is not valid

  • Error: The folder does not contain a valid Flex Builder Project.

    HI All,
    My first Post here. I am new to Flex Hardly 10 days old. I
    want to open the flexstore project in flex builder 3 and could not
    able to do so.
    What I did: file->import->.... got the error msg as
    "The folder does not contain a valid Flex Builder Project".
    also tried file->import->general->..... same error
    msg.
    I need your Help guys
    I downloaded the sample project from
    http://examples.adobe.com/flex2/inproduct/sdk/flexstore/srcview/index.html
    Thanks in Advance
    SAS
    Text

    "shakeb66" <[email protected]> wrote in
    message
    news:gknbn8$av9$[email protected]..
    > HI All,
    > My first Post here. I am new to Flex Hardly 10 days old.
    I want to open
    > the
    > flexstore project in flex builder 3 and could not able
    to do so.
    > What I did: file->import->.... got the error msg
    as "The folder does not
    > contain a valid Flex Builder Project".
    > also tried file->import->general->..... same
    error msg.
    > I need your Help guys
    > I downloaded the sample project from
    >
    >
    http://examples.adobe.com/flex2/inproduct/sdk/flexstore/srcview/index.html
    Try creating a new Flex project and dragging the files from
    the zip into the
    src folder. You may find that you need to rearrange things a
    bit, depending
    on how they set up the project, but this should get you
    started.
    HTH;
    Amy

  • Error:The node does not contain any elements

    Hi Experts,
    I am getting this error.
      The following error text was processed in the system SR6 :  The node does not contain any elements. COMPONENTCONTROLLER.1.ROADMAP
    The error occurred on the application server server6_SR6_00 and in the work process 0 .
    The termination type was: RABAX_STATE
    The ABAP call stack was:
          Method: RAISEELEMENT_NOT_FOUND of program CL_WDR_CONTEXT_NODE===========CP
          Method: IF_WD_CONTEXT_NODE~SET_STATIC_ATTRIBUTES of program CL_WDR_CONTEXT_NODE_VAL=======CP
          Method: WDDOINIT of program /1BCWDY/G25NECI0LTPP66VI3KOI==CP
          Method: IF_WDR_COMPONENT_DELEGATE~WD_DO_INIT of program /1BCWDY/G25NECI0LTPP66VI3KOI==CP
          Method: DO_INIT of program CL_WDR_DELEGATING_COMPONENT===CP
          Method: INIT_CONTROLLER of program CL_WDR_CONTROLLER=============CP
          Method: INIT_CONTROLLER of program CL_WDR_COMPONENT==============CP
          Method: INIT of program CL_WDR_CONTROLLER=============CP
          Method: INIT of program CL_WDR_CLIENT_COMPONENT=======CP
          Method: INIT of program CL_WDR_CLIENT_APPLICATION=====CP
    What is the problem here?
    Thank you.
    Lalitha.

    (Assuming you have created elements for node...)
    Definitely it is cardinality problem, please check that... Try to understand below points to avoid such error.
    When a node is created in the context of a Web Dynpro component, the cardinality of the node is specified. The cardinality defines how often a node is to be instantiated at runtime u2013 that is, how many elements of this node are available at runtime.
    u2022        1u20261          Only one element is instantiated.
    u2022        0u20261          At runtime, no more than one element is instantiated, but it is also possible that no element is instantiated.
    u2022        1u2026n          n elements can be instantiated, but at least one element must be instantiated.
    u2022        0u2026n          The number of instantiated elements of the context node can vary.
    The cardinalities 0..n and 1..n correspond to the declaration of an internal table. The cardinality 1..1 corresponds to the declaration of a structure.
    Thanks,
    Swanand.

  • BI Publisher Word Template The report does not contain any data fields.

    I have OBIEE BI Publisher report (10.3.4) working fine using BIP but using MS Word 2003 I want to create new template and want to add charts etc.
    Step 1. In MS Word I successfully login Oracle BI Publisher as Administrator
    2. Oracle BI Publisher -> Open (I open the report)
    3. Go to Insert -> Table Wizard
    I get this error:
    The report does not contain any data fields. Please make sure that the reports generates data with the default settings or provide a valid XML file.
    Please help

    Hi
    How do I load XML data? Also why XML data load is required? Do I have to export XML data from BIP View screen and load from the same file from the word?
    Please clarify
    Thanks

  • "The stylesheet does not contain a document element" error

    Hi,
    I'm using Hyperion Financial Management 11.1.1.3
    I successfully created intercompany transactions but when I select the "auto match" to perform the matching process, the running task page ensure that the process is completed successfully. However, when I press "log" I found the following error:
    Error Number:-2147467259
    Error Description:The stylesheet does not contain a document element. The stylesheet may be empty, or it may not be a well-formed XML document.
    Error Source:msxml6.dll
    Page On which Error Occurred:/hfm/Administration/ShowRunningTaskLog.asp
    My environment is win server 2003 on a VM and EPM 11.1.1.3
    Thank you and best regards,
    Ahmed.

    Hi taku,
    Yes I've solved my issue.
    Firstly, make sure that the entities and accounts used in the Intercompany Transaction are allowed for ICP in the metadata file by setting the attribute "IsICP=Y" to yes.
    Then, after you press the "Match" button, wait until the process finished and don't open the log. Just close the running task page, after the status showed that it is completed, and open the "process IC transactions" page again you will find the square sign becomes green which means that the transactions are matched.
    I followed the following example on Oracle by Example [http://www.oracle.com/technetwork/middleware/financial-management/tutorials/mictrans-094190.html?ssSourceSiteId=otncn]
    It's about "Managing Intercompany Transactions in Financial Management".
    I wish you can solve your issue soon.
    Best wishes,
    Ahmed.

  • Xslt error: the expression does not evaluate to a node-set

    hi guys - i'm really down because i cannot find / understand my xsl error and i have to finish my work very very soon
    the error message (by using xalan to create from the xml file my html output) is the following:
    xslt error: the expression does not evaluate to a node-set
    and the code fragement is:
    <xsl:template name="getNext">
    <xsl:param name="currentKnoten" />
    <xsl:for-each select="$currentKnoten"> //error is in this line
    </xsl:for-each>
    </xsl:template>please... help me....

    ok thanks!!! this saved me some time ;-)
    now i go back to the origin problem... my main idea is the following xsl code... may u can see here the problem with the node site.. but i think u need the xml file or?
    however this is my relevant xsl code:
    <xsl:template match="DATA">
              <xsl:element name="process">
                   <xsl:attribute name="name">
                        <xsl:value-of select="@name" />
                   </xsl:attribute>
                   <xsl:apply-templates select="INSTANCE"/>
              </xsl:element>
         </xsl:template>
    <xsl:template match="INSTANCE[@class='Data']">
              <xsl:element name="node">
                   <xsl:attribute name="name">
                        <xsl:value-of select="@name" />
                   </xsl:attribute>
                   <xsl:attribute name="class">
                        <xsl:value-of select="@class" />
                   </xsl:attribute>
                   <xsl:call-template name="copyAttributes" />
                   <xsl:variable name="nextNodes">
                        <xsl:value-of select="key('keyGetData', key('keyFrom', @name)/../TO/@instance)" />
                   </xsl:variable>
                   <xsl:call-template name="getNext">
                        <xsl:with-param name="currentNode" select="$nextNodes" />
                   </xsl:call-template>
              </xsl:element>
    </xsl:template>     
    <xsl:template name="getNext">
              <xsl:param name="currentNode"/>
              <xsl:for-each select="$currentNode">
                   <xsl:element name="node">
                        <xsl:attribute name="name"><xsl:value-of select="@name"/></xsl:attribute>
                        <xsl:attribute name="class"><xsl:value-of select="@class"/></xsl:attribute>
                        <xsl:variable name="nextNodes">
                             <xsl:value-of select="key('keyGetData', key('keyFrom', @name)/../TO/@instance)"/>
                        </xsl:variable>
                        <xsl:call-template name="copyAttributes"/>
                        <xsl:call-template name="getNext">
                             <xsl:with-param name="currentNode" select="$nextNodes"/>
                        </xsl:call-template>
                   </xsl:element>
              </xsl:for-each>
         </xsl:template>
         <xsl:template name="copyAttributes">
              <xsl:for-each select="descendant::*">
                   <xsl:copy>
                        <xsl:copy-of select="@*|node()"/>
                   </xsl:copy>
              </xsl:for-each>
         </xsl:template>
         <xsl:template match="@*|node()">
              <xsl:apply-templates/>
         </xsl:template>

  • The extention does not contain valid signature...".

    Hi
    I made .ZPX file. But during unpacking it shows an alert "The extention does not contain valid signature...". What can be reason and how to fix it?

    Hi Maxim3,
    It is difficult to tell what is wrong with your ZXP without inspecting what's inside it, but here are a few things which could cause this kind of error in Extension Manager
    Adding files to the ZXP after it has already been signed
    Adding a whole folder to a ZXP, rather than the contents of a folder (since Extension Manager won't find your MXI in the root level of your ZXP)
    Adding files which contain double-byte characters (e.g. Traditional Chinese)
    The command should have looked something like this:
    java -jar ucf.jar -package  -storetype PKCS12 -keystore cert.p12 -storepass password outputfile.zxp -C "/inputfolder" .
    [note the dot (.) at the end of the command]
    Probably the easiest way to package a ZXP is using Adobe Exchange Packager:
    https://www.adobeexchange.com/api/Packager.exe
    https://www.adobeexchange.com/api/Packager.dmg
    ...as you can use this to create self-signed certificates, and it guides you through the process of packaging and signing.
    Fraser

  • "the repository does not contain all the required definitions"

    Hello,
    At customer's site, I experiment a problem with Powerdesigner Viewer version 16.5.3.2 (4343) to view content of the repository created by Powerdesigner 16.5.3.2 (4343).
    I got the message "The repository does not contain all the required definitions. It cannot be used with this version of the Viewer.".
    Is there someone having an idea of the solution ?
    Kr,
    Thierry de Spirlet

    Hello,
    This article may help you configure the Viewer properly.
    See KBA 1877837 (https://support.wdf.sap.corp/sap/support/notes/1877837)
    I hope this helps,
    Arnaud

  • I am trying to open a service request and the site does not work.

    I am trying to open a service request and the site does not work with ANY browser. I get the page https://getsupport.apple.com/GetParts.action which says "Send in for service. We just need a little more information." The continue button does not work. I've seen this problem before trying to file support requests. It's as if Apple simply does not want you to create requests.

    I just went through several screens and had no problems.  Try clearing your browser's cache and/or history.

  • WDS "The file does not contain a valid install image"

    I have WDS installed on a Windows Server 2008 R2 SP1 machine.  I can quite happily import Windows 7 Install images from the Windows 7 installation DVD, but if I try to import from the Windows Server 2008 R2 SP1 installation DVD, at sources\install.wim, I
    get:
    "The file does not contain a valid install image"
    If I run WDSUTIL from the command line I get:
    "An install image could not be found in the image file".
    I believe that the DVD is fine as I can install machines from it and mount the sources\install.wim file using DISM.
    Anyone any idea what's wrong?
    Note that the problem is not with my own images, it's with the image as supplied on media direct from Microsoft.

    Which download link did you use to get your SP1 media? From this link:
    http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=5842 ?

  • Error: The user does not exist or is not unique - when setting permission programmatically

    Hi,
    I am custom Sequential workflow in which I am breaking the permission and setting permission to list item.
    I have used the below code for setting Permission:
    SPRoleDefinition oSPRoleDefinition = oSPWeb.RoleDefinitions["RoleName"];
    //Grant permission to Manager
    SPRoleAssignment oSPRoleAssignmentManager = new SPRoleAssignment(strManagerLanID, strManagerEmail, "", "");
    oSPRoleAssignmentManager.RoleDefinitionBindings.Add(oSPRoleDefinition);
    CurrentListItem.RoleAssignments.Add(oSPRoleAssignmentManager);
    I am getting the error as :
    Error: The user does not exist or is not unique.
    How to fix this?
    Thanks

    I think you misunderstood the solution proposed by frederic, what he is suggesting is that the error doesn't come from your code but from the user account
    have you tried with another account ? (maybe the one you are using to log to your environment)
    With this information, it will help us to know if the problem comes from your code or from the user account
    Best regards, Christopher.
    Blog |
    Mail
    Please remember to click "Mark As Answer" if a post solves your problem or
    "Vote As Helpful" if it was useful.
    Why mark as answer?

  • Managed System Configuration ! The table does not contain any data !

    Hi,
    In Sol Man Setup , Managed System Configuration, in phase 6 - Create Logical Componets -
    There is no Product Version and Product Instance Available.
    The message is :  " The table does not contain any data "
    How can correct this problem ?
    Thanks

    Hi,
    while creating new Logical Component via SMSY , you need to specify Product first.
    e.g. if you managed system is ERP 6.0 , select Product as SAP ERP
    once you select Product , it automatically fetches information for product Version and Main Instance depending upon Product field input.
    Please check and let us know if issue still persits.
    Thanks,
    Rupali

  • HT4463 I bought the OS Moutain Lion three weeks ago, but I can't download it. The site does not responde. Could somebody help me?

    I bought the OS Moutain Lion three weeks ago, but I can't download it. The site does not responde. Could somebody help me?

    Turn off the Firewall in System Preferences > Security & Privacy > Firewall
    Disable anti virus software.
    Make sure your Mac meets Mountain Lion requirements > Apple - Upgrade your Mac to OS X Mountain Lion.

Maybe you are looking for