Error "The System cannot find the specified" when installing XI3.1 FP1.3

Error "The System cannot find the specified" happened when installing XI3.1 FP1.3 to client machine, however the installation is OK to server.
After the error, go to Control Panel -> Add or Remove Programs, and observe.
BusinessObjects Enterprise XI 3.1 Client Tools is installed,
but BusinessObjects Enterprise XI 3.1 Client Tools Japanese Language Pack is not.
And Language Pack install log is not written.
The same error happened when installing .net2.0.
The installation for FP1.2 is OK.
Would you tell me what reason probablely this issue is?
Thanks.

Hello Sarah,
I recommend to post this query to the [BusinessObjects Enterprise Administration|BI Platform; forum.
This forum is dedicated to topics related to administration and configuration of BusinessObjects Enterprise, BusinessObjects Edge, and Crystal Reports Server.
It is monitored by qualified technicians and you will get a faster response there.
Also, all BOE Administration queries remain in one place and thus can be easily searched in one place.
Best regards,
Falk

Similar Messages

When i do file, save for web, i get an error that says " the operation could not be completed. The system cannot find the path specified." What can fix this?

when i finish a file and try to "save for web", i get an error box saying The operation cannot be completed. The system cannot find the path Specified.
What can i do or where do i look?

ELEMENTS 12 AND ELEMENTS 13
Upgraded to 13 Thinking might resolve the issue.
Was working fine up until we had "Tech" come in the office and "up grade some stuff"
then all of a sudden i started getting this message, something happened but i don't have a clue what.

Error message when starting: McShield.dll: the system cannot find the file specified - what do I do to solve this?

When I start Firefox, the following message appears before the home page opens:
"COMMONSHELL: McShield.dll
The specified resource language ID cannot be found in the image file.
McShield.dll: The system cannot find the file specified."
I click OK, Firefox opens normally and everything seems to operate as expected, no further problems.

hello, the error message is obviously coming from one of the installed mcafee extensions. please directly contact mcafee technical support - they can likely give you more detailed guidance and are the only ones who can fix bugs or make necessary adjustments in the addon.

"The system cannot find the path specified" error when installing a network printer running Win 7

Some of the end users are having issues when trying to install network printers. We have created a portal where they can locate the printer they want to connect to, click connect, and the printer will download with the correct drivers on their PC's. The
entire company is running Win 7 for their operating system. One end user in particular has had issues installing multiple printers from the portal, when I go to test installing these same printers on my PC, they all install successfully. trying to figure out
why some end users hav issues with installation and others do not. They will get the error, The system cannot find the specified path. Any help would be great

Hi JeffWilko,
What is your current situation?
To receive better analyzation, please provide more details?
1. Could you explain a bit about the sentence ‘installing multiple printers from the portal’ ?
2. Check the event viewer and share us the related error log.
Please take the following steps for troubleshooting:
1. Ping the printers
2. Check if there are network firewall to block the access
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

I am receiving this error message when trying to export pictures: 'Unable to Export": An internal error has occured: Win32 API error 2 ( "The system cannot find the file specified.") when calling ShellExecuteExW from AgWorkspace.shellExecute.// I have a H

I am receiving this error message when trying to export pictures: 'Unable to Export": An internal error has occured: Win32 API error 2 ( "The system cannot find the file specified.") when calling ShellExecuteExW from AgWorkspace.shellExecute.// I have a HP ENVY Phoenix, fully loaded, 1 1/2 years old.

Nevermind I fixed it. Thank you.

Error: "The system cannot find the file specified" when trying to print to PDF w/ Acrobat 9.5

I get an Error: "The system cannot find the file specified" when trying to print to PDF w/ Acrobat 9.5 using Windows 7. This just started happening after upgrading to MS 2013 suite and also installed Adobe Reader at that same time.
I had problems in the past when Reader was installed with Acrobat, so I uninstalled Reader, but the problem still seems to occur.
any help would be appreciated.

That link has backslashes (%5C) that need to be changed to forward slashes:
*http://supportdocs.sonybiz.net/indexes/pi/LFS/May_2004/00035186.pdf

Error message "The system cannot find the file specified." when reinstalling C3180 drivers

Hello,
I experienced scanning problems with my C3180 and the error message indicated several solutions, including to reinstall the driver.
I worked my way through the list of fixes to this option. I uninstalled the drivers, downloaded
File name:
AIO_CDA_NonNet_Full_Win_WW_130_140.exe [1/1, 290.27M]
from www.hp.com/support and attempted to install.
Just after the accept licensing screen, the system begins a screen with four steps, the first of which is Checking System. Shortly after starting this, I receive the error message "The system cannot find the file specified.". The file name may be in the message header, but I cannot determine it due to the path length. It is off the displayed screen. (see screen image capture)
Closing the pop-up error message or clicking OK terminates the installation.
I am re-installing on a Dell Latitude E6510, running Windows 7 Professional, Service Pack 1, 64 bit. The printer was connected via USB, but I have disconnected for this stage of the install.
I appreciate any assistance/advice you can offer.
Kelly

Hi justkelly,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
Sorry to hear that you are getting errors when attempting to install the printer to your computer.
I have a link that I would like you to click on. In the steps on the link, please do step 1 and step 2 seeing that you are using Windows 7.
Installation issues.
Please let me know if this resolved your issue. I will be more than happy to offer more assistance if the link does not resolve your issue.
Thanks for your time.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

"The system cannot find the path specified." error message when trying to start instaling a software

hi
when i trying to install a software for example CAD Viewer software, my windows show this message : The system cannot find the path specified
i use the windows 7

Zohre
What version of the CAD software are you trying to install? Is it compatible with win 7? Older installations (on older OS) installed to a different default location that win 7 does not have.
Wanikiya and Dyami--Team Zigzag

„The system cannot find the file specified. (Exception from HRESULT: 0x80070002)" - Error when trying to create an new controlled GPO

Hello,
we were planning to Upgrade from AGPM 4.0 to AGPM 4.0 SP2. The new AGPM should be placed on a new server. Additionally we created a new service account as the password of the old service account has been lost. We granted the new service account Full Rights
in "Domain Delegeation" and "Product Delegation", then stopped the AGPM Service on the old server.
On the new server AGPM was installed using the new service account, then the service was stopped and the archive was copied rom the old to the new server. The customer could edit policies, but not deploy them. Because of this, we changed back to the old
server, but copied the folders that were changed on the new server to keep them up to date.
Now creating a controlled Group Policy from a template causes the error
„The system cannot find the file specified. (Exception from HRESULT: 0x80070002). We tried several templates and even created new ones but the problem persists.
The following things do work:
- editing a controlled policy
- renaming a controlled policy
- check in/check out of a policy
- set a uncontrolled policy to controlled (needs to grant the serviceaccount Full rights to the policy before)
- deletion of a controlled policy
- creating a template from a policy
Thank you in advance for your help.

0x80070002 usually means that the source could not be found or located. Make sue that the FQDN path to your templates is the correct one as well as your DNS is
properly configured.
sharing some manuals @: http://1drv.ms/1kk6u6j

When I open a pdf link I am getting an error "The system cannot find the file specified. " The same link is opened in other browsers.

I used to open the link" http://supportdocs.sonybiz.net/indexes/pi%5CLFS%5CMay_2004%5C00035186.pdf" in firefox earlier. Now I use version 5.0. Recently I noticed that such links in pdf are not opening with firefox and getting an error that "The system cannot find the file specified. " But the same is opened in other browsers. I do not know whether it is a settings problem or limitation of firefox.
It is very much helpful if someone can help me in resolving this issue.

That link has backslashes (%5C) that need to be changed to forward slashes:
*http://supportdocs.sonybiz.net/indexes/pi/LFS/May_2004/00035186.pdf

Error when running Get-DatabaseAvailabilityGroupNetwork "The system cannot find the file specified."

Exchange 2013 CU7 on Windows 2012.
I have a 3 server DAG (newly created) and the EAC lists each server with Is Operational = Yes.
When I run Get-DatabaseAvailabilityGroupNetwork on any of the 3 servers I get:
[PS] C:\>Get-DatabaseAvailabilityGroupNetwork
Could not load file or assembly 'Microsoft.Exchange.Data, Version=14.0.0.0, Culture=neutral,
PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.
    + CategoryInfo          : NotSpecified: (:) [Get-DatabaseAvailabilityGroupNetwork], FileNotFoundException
    + FullyQualifiedErrorId : [Server=<servernameremoved>,RequestId=11e182c9-cb4a-4f48-b985-dc4be7ef97ef,TimeStamp=2/23/20
   15 10:00:53 PM] [FailureCategory=Cmdlet-FileNotFoundException] 586ECE82,Microsoft.Exchange.Management.SystemConfig
urationTasks.GetDatabaseAvailabilityGroupNetwork
    + PSComputerName        : <servername FQDN removed>
Any suggestions?

Try to run below command and see what it shows.
Get-DatabaseAvailabilityGroupNetwork -server node1.domain.com
BR/Deepak

Error message on my development workstation: The system cannot find the file specified.

Post Author: cseverin
CA Forum: Crystal Reports
Hi,
I am currently developing an ASP.NET website using Visual Studio.NET 2005. I am using the .NET 2.0 framework, VB.NET as my programming language and I connect successfully to a SQL Server 2005 database. I can select, insert, update and delete data from the database elsewhere in my project, so I know basic connectivity isn't an issue. The problem seems to be with Crystal Reports.
I created a folder called 'Reports' in my project and added a Crystal Report file (OpenFiles.rpt) to it. I designed the report and initally used a hard-coded SQL query as its datasource so I could quickly get the database fields onto the report and preview them. All worked fine.
To make the report accessible to the rest of the website, I created an .xsd dataset file containing the three tables (and their corresponding tableadapters) that the report requires and then redeveloped the report using the dataset as the datasource for the report. After doing this, the preview no longer worked.
Next, I added a page to the website and dragged a Crystal Report Viewer Control onto it. In the code behind the page I wrote:
Option Strict On
Imports System.Data
Imports CrystalDecisions.CrystalReports.Engine
Imports CrystalDecisions.Shared
Partial Class Reports
     Inherits System.Web.UI.Page
     Private objOpenFilesreport As OpenFilesReport
     Private rptOpenFiles As ReportDocument
     Private strLastErrorMessage As String = Nothing
     Private errLastException As Exception = Nothing
     Dim strFileKey As String
     Dim strJurisdictionCode As String
     Dim strStaffId As String
     Dim strReportId As String
     Private Sub ConfigureCrystalReports()
          Dim reportPath As String = Server.MapPath("OpenFiles.rpt")
          Dim rptopenfiles As New ReportDocument
          rptOpenFiles.Load(reportPath) <== I checked this during execution and the value correctly points to the OpenFiles.rpt file in the Reports     folder of my project
          Dim ConnectionInfo As ConnectionInfo = New ConnectionInfo()
          ConnectionInfo.DatabaseName = my database
          ConnectionInfo.UserID = login id of user
          ConnectionInfo.Password = user's password
          SetDBLogonForReport(ConnectionInfo, rptopenfiles)
          CrystalReportViewer1.ReportSource = rptopenfiles
     End Sub
     Protected Sub Page_Init(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Init
         ConfigureCrystalReports()
     End Sub
     Private Sub SetDBLogonForReport(ByVal ConnectionInfo As ConnectionInfo, ByVal myReportDocument As ReportDocument)
          Dim myTables As Tables = myReportDocument.Database.Tables
          For Each myTable As CrystalDecisions.CrystalReports.Engine.Table In myTables
               Dim myTableLogonInfo As TableLogOnInfo = myTable.LogOnInfo
               myTableLogonInfo.ConnectionInfo = ConnectionInfo
               myTable.ApplyLogOnInfo(myTableLogonInfo)
          Next
     End Sub
End Class
I added a hyperlink to one of the existing pages on the website to navigate to this page with the report viewer on it. When I run the website in Visual Studio and click on the hyperlink I get the following:
Server Error in '/MyTest' Application.
The system cannot find the file specified.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Runtime.InteropServices.COMException: The system cannot find the file specified.Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
[COMException (0x80004005): The system cannot find the file specified.
]
   CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options) +0
   CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options) +126
   CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() +442
[Exception: Load report failed.]
   CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() +513
   CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob) +1378
   CrystalDecisions.CrystalReports.Engine.ReportDocument.EnsureLoadReport() +149
   CrystalDecisions.CrystalReports.Engine.ReportDocument.get_DataDefinition() +85
   CrystalDecisions.CrystalReports.Engine.ReportDocument.get_ParameterFields() +158
   CrystalDecisions.Web.CrystalReportSource.BindControlParameter(Parameter parameter) +130
   CrystalDecisions.Web.CrystalReportSource.DataBindParameters() +191
   CrystalDecisions.Web.CrystalReportSource.EnsureParameters(Boolean forceDataBind) +90
   CrystalDecisions.Web.CrystalReportSource.LoadCompleteEventHandler(Object sender, EventArgs e) +47
   System.Web.UI.Page.OnLoadComplete(EventArgs e) +96
   System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +4086
Version Information: Microsoft .NET Framework Version:2.0.50727.832; ASP.NET Version:2.0.50727.832
Any ideas, anyone?
Also, assuming I can get past this error, I will need to figure out how to fill the tables in the .xsd dataset file. I have written a class for the dataset that includes functions that populate the tables in the dataset from the database by executing SQL queries. But how do I call these functions at the time the report is run?
This is my first Crystal report written in .NET and I've been struggling with it for days now. Any help would be most appreciated!
Thanks very much!
Chris Severin

hello, the error message is obviously coming from one of the installed mcafee extensions. please directly contact mcafee technical support - they can likely give you more detailed guidance and are the only ones who can fix bugs or make necessary adjustments in the addon.

Receiving error message 'Could not load file or assembly 'System.ServiceModel.Activation, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.'

I started getting this error message for the first time today. When I look in the event log I see it every time anyone tries to sync to a mobile device to the exchange server. I've also had this problem trying to connect using
Outlook. I believe it is an IIS issue but I'm not absolutely sure so I'm posting this in the Exchange forum as well.
The event viewer has the following information...
3008
A configuration error has occurred.
5/1/2014 10:41:08 PM
5/2/2014 5:41:08 AM
7539d8a38c8b47869eda3f1749aba08d
1
1
0
/LM/W3SVC/1/ROOT/Microsoft-Server-ActiveSync-75-130434828686436855
Full
/Microsoft-Server-ActiveSync
C:\Program Files\Microsoft\Exchange Server\V14\ClientAccess\sync\
SERVER
16284
w3wp.exe
NT AUTHORITY\SYSTEM
ConfigurationErrorsException
Could not load file or assembly 'System.ServiceModel.Activation, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. The system cannot find the file specified.
https://remote.testserver.com:443/Microsoft-Server-ActiveSync/default.eas?User=user.name&DeviceId=ApplC39GQ5xxxxxx&DeviceType=iPhone&Cmd=Ping
/Microsoft-Server-ActiveSync/default.eas
174.224.130.31
False
NT AUTHORITY\SYSTEM
24
NT AUTHORITY\SYSTEM
False
at System.Web.Configuration.ConfigUtil.GetType(String typeName, String propertyName, ConfigurationElement configElement, XmlNode node, Boolean checkAptcaBit, Boolean ignoreCase) at System.Web.Configuration.Common.ModulesEntry..ctor(String name, String typeName, String propertyName, ConfigurationElement configElement) at System.Web.HttpApplication.BuildIntegratedModuleCollection(List`1 moduleList) at System.Web.HttpApplication.GetModuleCollection(IntPtr appContext) at System.Web.HttpApplication.RegisterEventSubscriptionsWithIIS(IntPtr appContext, HttpContext context, MethodInfo[] handlers) at System.Web.HttpApplication.InitSpecial(HttpApplicationState state, MethodInfo[] handlers, IntPtr appContext, HttpContext context) at System.Web.HttpApplicationFactory.GetSpecialApplicationInstance(IntPtr appContext, HttpContext context) at System.Web.Hosting.PipelineRuntime.InitializeApplication(IntPtr appContext)
I have tried most, if not all, of the different post's suggestions to no avail.
The steps I have taken are as follows...
1. Repaired .Net 4 (Both the client and extended)
2. Uninstalled and reinstalled .Net Framework 4.0.
3. Verified that the dll exists.
4. Checked the applicationHost.config file. It contains the follow statement...
<add name="ServiceModel-4.0" type="System.ServiceModel.Activation.ServiceHttpModule, System.ServiceModel.Activation, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" preCondition="managedHandler,runtimeVersionv2.0"
/>
5. Changed the following line in web.config to include the runtimeVersion...
<add name="ServiceModel" type="System.ServiceModel.Activation.HttpModule, System.ServiceModel.Activation, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" preCondition="managedHandler,runtimeVersionv2.0" />
6. Executed aspnet_regiis.exe -iru from the ...\Framework64\v4.0.30319 directory.
7. Went to inetpub\history to use an applicationHost.config file from yesterday but it only has history from 9PM tonight. It probably had what I needed before I started changing it tonight.
I still receive the same error message.
Like I said everything was working yesterday. In fact I didn't hear or see any issue until after 1PM today.
Any help would be very appreciated!

Hi,
Please confirm whether users can access their mailboxes from Outlook Web Access or not. We can do the following changes to have a try:
1. In IIS > Application Pools, change the .NET Framework Version to v2.0 and restart IIS service.
2. If it doesn’t work, explore the Default Web site.
3. Renamed the web.config file to web.config.old
4. Reset IIS using iisreset command to have a try.
Thanks,
Winnie Liang
TechNet Community Support

"The system cannot find the path specified" error

Hi, Thanks for taking the time and reading.
I had to update an old report that was made in CrystalReports. I copied the rpt files and pasted them into a csharp solution in VS 2010.
The report structure is of a Main report and 6 subreports. I have to run this Main report many times and feed it a different integer as a parameter.
I can preview the report in report viewer perfectly. When i try to export the main report into a pdf format
i get an exception. I have tried a few different formats and it spews the same error.
Oddly enough the export sometimes works if the report i am previewing has the "Save data in the report" check box checked. My guess is that this is cached. Also when i run just the subreports through my application, it works.
Things i have tried:
I installed: CRRuntime_64bit_13_0_13
I installed: CRforVS_13_0_13
Took a look at the Procmon and i could not find an access denied error
Event Viewer has no detail.
Changed Registry values of ConnectionDirectoryPath and ReportDirectoryPath to "c:\"
Code:
if (!Directory.Exists(filePath))
Directory.CreateDirectory(filePath);
string fileName = filePath + string.Format(GlobalVaraiables.FILE_SAVE_NAME, i);
cryRpt.SetParameterValue(GlobalVaraiables.FUND_DATA_KEY_PARAMETER, i.ToString());
cryRpt.ExportToDisk(CrystalDecisions.Shared.ExportFormatType.PortableDocFormat, fileName);
Error message:
System.Runtime.InteropServices.COMException (0x80004005): The system cannot find the path specified.
    at CrystalDecisions.ReportAppServer.Controllers.ReportSourceClass.Export(ExportOptions pExportOptions, RequestContext pRequestContext)
    at CrystalDecisions.ReportSource.EromReportSourceBase.ExportToStream(ExportRequestContext reqContext)
    at CrystalDecisions.CrystalReports.Engine.FormatEngine.ExportToStream(ExportRequestContext reqContext)
    at CrystalDecisions.CrystalReports.Engine.FormatEngine.Export(ExportRequestContext reqContext)
    at CrystalDecisions.CrystalReports.Engine.ReportDocument.ExportToDisk(ExportFormatType formatType, String fileName)
    at FundDataPDFSaver.SaveReport.GenerateReports(List`1 l) in C:\Users\user.name.here\Documents\Visual Studio 2010\Projects\FundDataToPDF\FundDataPDFSaver\SaveReport.cs:line 74
System Details:
Windows 7 Enterprise N 64 bit
ServicePack 1
IDE:
Visual studio 2010 .Net framework 4
Application is set to run as "Any CPU"
CrystalReports :
dll's: C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86\dotnet\CrystalDecisions.CrystalReports.Engine.dll
    C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86\dotnet\CrystalDecisions.ReportSource.dll
    C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86\dotnet\CrystalDecisions.Shared.dll
Thanks for your help

I don't see where you're ever setting the logons for the tables in the report and subreports. The reports with saved data are working because they already have data in them. The reports without saved data are not working because they don't know how to connect to the database.
See the Database section here Crystal Reports for .NET SDK Samples - Business Intelligence (BusinessObjects) - SCN Wiki for more information about how to set the logons.
-Dell

Error [0x80070003] The system cannot find the path specified

We have Windows 2012 Server hosting 2 VMs - Domain Controller & RDS. We have been doing Windows Server Backup incremental and have an ongoing issue with scheduled backups each night. The backup shows completed with warnings and generates
2 log files.
The first log files shows:
Backup of volume \\?\Volume{5d46f853-5db2-11e2-93e7-806e6f6e6963}\ succeeded.
Backup of volume C: succeeded.
Backup of volume F: succeeded.
Application backup
Writer Id: {66841CD4-6DED-4F4B-8F17-FD23F8DDC3DE}
Component: ACBCD71E-A8CA-4672-B951-52C1BE8444BE
Caption : Backup Using Child Partition Snapshot\FMLRDS1
Logical Path:
Writer Id: {66841CD4-6DED-4F4B-8F17-FD23F8DDC3DE}
Component: Host Component
Caption : Host Component
Logical Path:
The 2nd log file more often than not shows:
Backup of volume E: has failed. Backup failed as shadow copy on source volume got deleted. This might caused by high write activity on the volume. Please retry the backup. If the issue persists consider increasing shadow copy storage using 'VSSADMIN Resize
ShadowStorage' command.
Error in backup of E:\ during enumerate: Error [0x80070003] The system cannot find the path specified.
Application backup
Writer Id: {66841CD4-6DED-4F4B-8F17-FD23F8DDC3DE}
Component: 2B4A9541-C88B-442E-9A7A-6D8A27342C11
Caption : Backup Using Child Partition Snapshot\FMLDC1
Logical Path:
Error : 8078010D
Error Message : Enumeration of the files failed.
Detailed Error : 80070003
Detailed Error Message : (null)
We had been getting a successful backup once or twice a week which showed completed (with no mentioned of warnings) but now it regularly shows completed with warnings as noted above.
We did a manual full backup of the DC to a different external drive a few days ago and that completed without warnings and the backup shows: E: Completed 63.38 Full - VSS Copy Backup Successful, 8/27/13 3:35 PM - 4:43 PM. Data Transferred 63.38
On a side note, we can view the logs in the windows/logs/windowsserverbackup directory but when we attempt to view the details of a log file through the Local Backup Console for any log which shows completed with errors, we get a "MMC has detected an
error in the snapin and will unload and then it shows Object referenced not set to instance of an object." The manual backup noted above that was successful is able to be viewed through the Local Backup Console without this error.
Any idea as to why this is failing during the scheduled backups? This hosts a database that we need to have regular successful backups.

Hi,
First please follow the steps below to re-register dll files. Detailed information could be found here: http://support.microsoft.com/kb/940032:
1. Click Start, click Run, type cmd, and then click OK.
2. Type the following commands at a command prompt. Press ENTER after you type each command.
3. cd /d %windir%\system32
4. Net stop vss
5. Net stop swprv
6. regsvr32 ole32.dll
7. regsvr32 oleaut32.dll
8. regsvr32 vss_ps.dll
9. vssvc /register
10. regsvr32 /i swprv.dll
11. regsvr32 /i eventcls.dll
12. regsvr32 es.dll
13. regsvr32 stdprov.dll
14. regsvr32 vssui.dll
15. regsvr32 msxml.dll
16. regsvr32 msxml3.dll
17. regsvr32 msxml4.dll
Please let us know if any command failed to be performed with an error.
If issue still exists, have a try with the step it provided "VSSADMIN Resize ShadowStorage" to enlarge the shadow storage.
Also you could test to delete all old Shadow Copies by acccessing <Drive> Properties --> Shaodow Copies --> Delete Now. This will remove all your backup information so if it is not acceptable, just skip this step.
TechNet Subscriber Support in forum |If you have any feedback on our support, please contact [email protected]

Error "The System cannot find the specified" when installing XI3.1 FP1.3

Similar Messages

Maybe you are looking for