Error "There is no material group assigned to this value.Message BBP_ATTR01

Hi Experts,
We are in SRM 7.0
When assigning a new product category to a Purchasing Group. In the course of the assignment of the product category , the following error popped up: "There is no material group assigned to this value. Message number: BBP_ATTR010.Also,material group is there in R/3 & we have  executed the necessary maintenace in V_BBP_DET_ACCT.
Any pointer will be highly appreciated,
Regards,
Rupesh

Hi
Did you bring the new material group into SRM or not?
can you see new product category in comm_category table?
Muthu

Similar Messages

  • No material group assigned to this value

    Hello, I am trying to add new value to a purchasing organization in extended attributes about product categories.
    When I add new value system throws an error message: "No material group assigned to this value", this material group is created in R/3 backend but not in SRM. How can I transport this value to SRM? Only 3 values not all data about material groups.
    Thanks in advance
    Rosa Rodríguez

    Hello, I have this in the transactions that you mentioned:
    r3ar2
    Request Name: ESN
    Adapter Object: DNL_CUST_PROD1
    RequestType: Request: Objects could be loaded from R/3 backend / CRM DB
    Use One with mark
    Table: T023T
    FieldName: MATKL
    I/E: I Inlusive defined set/array
    Opt: BT
    Low and High: range of material groups that I want to replicate.
    I put in transaction R3ar4 the request name and when I check on transaction r3ar3 this transaction is running and take long time .... I think there is a problem because are only 3 product categories
    What can I do to check if the system failed or something similar?
    Thanks
    Rosa Rodríguez

  • Please select an appropriate pay group assigned to this operating unit

    Hello All ,
    A new pay group is created and assigned to the new supplier site and when an invoice is created against that pay group
    its is populating an error message saying that Please select an appropriate pay group assigned to this operating unit.
    As result I am unable to complete creation of invoice.
    Any inputs Suggested ? Appreciate it !
    Thanks,
    Deepthi.

    Hi,
    Please obtain a FND Debug log on the issue and upload the log to a free hosting site and provide the link here for our reference.
    Meanwhile also raise an SR.
    Please see:
    How to enable and retrieve FND debug log messages (Doc ID 433199.1)
    Thanks &
    Best Regards,

  • Material group assignment to GL

    Hi,
    How to assign a material group to G/L so that the G/L automatically get
    displayed at the time of PO creation
    Sanjeev

    HI Sanjeev,
    The Automatic Account Trigger WRT to Material Group Happens as below.
    OLME(Tcode)>Purchasing>Material Master-->Entry Aids for items With out material Master.
    in the above node we assign Material Group to the valuation classs.
    Since you are Using a Material Group,so the Po shoud always be a Account assigned PO only.
    So account Assignment has Account Modifier Key ,which need ed to be Linked to the valuation class.
    Now the automatic GL comes from the T code OBYC.
    Against the Offsetting Account GBB-(Account Modifier Key Maintained in the account account assignment Category in Account assinermnt P)
    For seeing the same go to OLME(tcode)--> account assignment -->Maintain account assignment.
    get the Account modifier key.
    And maintain the same in OBYC in GBB. with the GL Account.(Debit Entry)
    Using the above the GL can be defaulted
    There are other factors like valution calss,General modifers that can aslo be used for the same as selection parameters.
    Know in this the Other key that can also be used ,which is valuation class as a Factor if you select the same
    For Material Group Valution class commes from
    OLME>Material Master> Entry aids without master..
    Valution Class is maintained as below.
    Valuation Class-- Defined in OMSK.
    and the other Selection is the Valution Modifier.
    it is maintined as below
    Valuation MOdifier--OMWD.
    here the valuation area(plant) and the company code is attached to a Valuation grouping code ,which is other wise called as valuation modifier.
    hope so it helps
    Regards
    Anjanna.

  • Mess. Type ET01: No labeling material group is assigned to material

    Dear Gurus,
    I want to print message type ET01 but when I try the system give me following message: "No labeling material group is assigned to material "
    What do I have to do to make my material group "labeling"?
    Waiting for your comments,
    Warm regards,
    Fuffo

    Hi Fuffo,
    I am getting the same error when I am trying to print my material id labels.
    The error reads:
    No labeling material group is assigned to material &1
    Message no. WJ024
    Is there something missing in the material master ? I have had a good look at the config (a couple of times) and the master data and am not able to make out what is it that I am missing.
    Your input will be very helpful.
    Thank you in advance.
    Regards,
    Pardeep.

  • Relase strategy characteristic with several material groups

    Dear Experts,
    Actually I'm implementing the MM Module, 6.00 version and I have the following issue:
    I created the release strategy Purchase Order, with these characteristics:
    - Material group
    - Net total purchase order
    - Plant
    The error consists in the Material Group characteristic don't run with several Material Groups. It seems that it could be possible only with one Material Group.
    If you know how I could work the characteristics with several material groups, pleas tell me.
    Thanks in Advance,
    Adriana Corredor
    MM SAP Consultant

    Hello, Adriana,
    it isn't clear what you mean by "characteristic don't run with several Material Groups":
    - is it that you cannot enter multiple values in classification? Then check whether you chosed "Multiple Values" in "Value assignment" subscreen of characteristics maintenance, transaction CT04;
    - is it that your release strategy isn't assigned to PREQ with several items with different MATKL values? It is neccessary to realize that if you use the coverall release of PREQ (which I guess you are using), the values of items has to be "summarized" (for purpose of release strategy assignment) into structure CEBAN "Communication Release Strategy Determination: Requisition"; the release strategy classification are then evaluated against this structure; if there is any field which differs for items, it is passed to structure CEBAN as empty; so either you have to have release strategy with MATKL empty, or you can modify the CEBAN content by enhancement M06B0001 "Changes to communication structure for release of requisitions", or you can prevent creation of PREQ with certain not-allowed combination of MATKL via user-exit or badi;
    Kind Regards
    TomT

  • Org. unit and associated material groups download from Org. structure

    Hi,
    I want to download the material groups and associated material groups(Defined in External attributes) from organisation structure.
    Please suggest how to do it.
    Best regards,
    Sambit

    Hi. There's a point. You said you wanted to download a list so I presumed you wanted all the org units and all the material groups assigned to them.
    If you only want to do it 1 org unit at a time the function will work perfectly.
    I f you do want to see all I have had another thought actually.
    You could run program RHOMATTRIBUTES_REPLACE.
    This allows you to replace 1 attribute with another, but if you do not press the "change" button it works as a good report on attributes.
    If you just put in attibute PRCAT and then Old Value = Logical System of backend and New Value = Logical system of backend and tick substring then execute, it will show you all the org units and all the material groups.
    Just be careful not to press the replace button on the output, that would actually change data.
    Regards,
    Dave.

  • Incorrect material group derivation for Profitability Analysis doucment

    Hi Gurus,
    I found out some of the Profitability Analysis doucment generated with wrong material group assigned. Material group was derived from Product number, in my case it is defined as "table lookup" step type as below.
    Source fields for table lookup:
    MARA-MATNR = COPA-ARTNR
    Assignement of Table fields to target fields:
    MARA-MATKL = COPA-MATKL
    Any idea of why this could be happen? Will it be due to my program error?
    Pls advise asap.
    Thanks & regards,
    LOI

    check KEQ3. maybe it is defined as "not used"

  • Authorisation group and Material group

    Hi Guys,
                  When a user create a PO, The material group assigned to Authorization group, is allowing the user user to create PO, whose role is not assigned to the authorization group.
    I am looking for solution, to restrict user from creating PO, whose role is not assigned to authorization group.
    Is there any user exit available to solve this issue.
    Thanks

    HI,
    In PR and PO transaction, there is no authorization object that check
    the material group.
    Only the following objects are checked in ME21N :
    M_BEST_BSA
    M_BEST_EKG
    M_BEST_EKO
    M_BEST_WRK
    To fulfill your requirement, you could consider the following
    suggestions :
    - in txn ME21n and Me51n , enter the value of the material group under
      personal setting. (in txn ME21n, click on personal setting, select
      default value   > PO item, fill in the corresponding material group
      click on always propose)
    - in the customization of purchasing (spro  > material management   >
      purchasing   > Purchase order   > Define screen layout at document
      level , select field selection akth and akte and aktv, double click
      on basic data, item. for field material group, select display only
      instead of optional!
    With the above setting, the material group will always defaulted for
    users and the screen will be grey off, do not allow user to change it.
    The only setback of this suggestion is you will have to setup personal
    setting for every new user.
    If you want only restricted GroupS to be displayed as defined in a role,
    there is no workaround in the standard design. To achieve this, you
    have to modify the standard coding and add an extra authority check for
    your authorization object (eg; Z_BEST_WGR). The standard program, in
    which the authorization check for the PO position takes place is
    "MM06EF0B_Berechtigungen_Kopf".
    The attached OSS note 20534 will explain in detail, how the
    authorization check works and also provides an example of the necessary
    coding to implement the authorization check for your own authorization
    object:
    EXAMPLE :
      authority-check object 'F_KNA1_BUK'
           id 'BUKRS' field '01'
           id 'ACTVT' field '03'.
      if sy-subrc <> 0.
        message e...   "Nicht berechtigt um ...
      endif.
    BUT please take into account, that ANY changes to the standard coding is
    a modification.
    There´s no user exit available.
    I hope this helps!
    Best Regards,
    Arminda Jack

  • LT41 - No active selection for group assignment

    Hello Guru,
    i need to group transfer requirement by transaction LT41 but when i try to select TR to assign them a group I always get the same error " No active selection for group assignment" and I´m not able to select transfer requirements.
    Maybe is there a customizing not done?
    Anyone can help me?
    thanks in advance
    Boris

    Hi,
    I'm not sure this help you or not but as a prerequisit of this sceanrio you have to make some settings for your WH (allow partial processing / SPRO > LE > WM > Master Data > Define control Parameters for WH No.). Please check the customizing step in SAP help:
    http://help.sap.com/saphelp_47x200/helpdata/en/c6/f841f24afa11d182b90000e829fbfe/frameset.htm
    Please also check whether you follow the proper steps during creation of a group:
    http://help.sap.com/saphelp_47x200/helpdata/en/c6/f841ff4afa11d182b90000e829fbfe/frameset.htm
    Csaba

  • Automatic upload of material group

    Hi
    My Source System - SRM.
    When ever a new material group is created i have to upload the material group manually.
    Very rarely material group is created so its upload is not schdueld in the process chain.
    So is there any way that when ever a shopping cart is created with the new material group the material group gets uplaoded automatically.
    Because of this there is always a risk that a shopping cart is created with new material group which ends up giving error Or is there any other way in which we can avoid error to occur.
    Regards,
    Rohini

    Hi Rohini,
    What I wanted to say is, include the infopackage for uploading material group into your chain before the loads of e.g. material master data or other transactional data where the material group is included. This is just the safest way to go.
    Basically you might need a separate chain where you include infopackages like the material group and include this chain as a subchain to you main chain or just run it before all other chains start.
    Hope it is clearer now!
    regards
    Siggi

  • Runtime Error when creating a new group

    I'm getting a runtime error when creating a new group on a site collection? 
    Thanks in advance

    The most possible reason is if your site collection is reached the maximum site quota limit,then there is chance to get the run time error while creating a new group.
    In this case,you will get the error while creating/updating the group or while adding the new user/uploading any content.
    Also Ensure the group name is not having any special/unsupported characters.
    Feel free to share the error screenshot/entry in the ULS logs.
    Please remember to click 'Mark as Answer' on the answer if it helps you
    Best Regards,
    Pavan Kumar Sapara
    s p kumar

  • Goods-receipt-based invoice verification default for material group

    Hello experts,
    I put by default the option Goods-receipt-based invoice verification when creating a purchase order by tcode ME21N. Now, I would like if possible to only insert the option Goods-receipt-based invoice verification by default for some material group. Is this possible? This behaviour needs to be automatic.
    How can I achieve this behaviour?
    Thanks in advance,
    Best Regards,
    JP
    Edited by: Jeyakanthan A on Nov 20, 2011 11:11 PM

    Dear JP,
    In standard system this is not possible to default this indicator based on Material Group. This can be defaulted from Vendor Master record or Purchasing Info Record or Ticked Manually PO Item Details.
    If you look to enhance you system to do this, I would not advisable you to go with this default option because there can be situation that you order some material without Material Master Record (Like a frame work Order) in that case you will not be able to do GR and there can be conflict.
    You can create Material Group Info. record and default it from there, but again this for scenario where Material Master Record does not exists(Non Stock).
    Hope you find this useful.
    Regards,
    Reetesh

  • Material group in Material master

    Dear All Warm greetings
    How to configure display of materials through material group? For end users
    Example when my user wants to view any material, system should only show the materials which he should as per material group
    Example while create Purchase requisition/Purchase order & display of material from MM04
    I tried by using parameter id in user profile, own data
    WGR & WM1 but doesnu2019t work
    Pleas advice me how can i process, Help he out with some solutions.
    Regards
    Shamulheq
    Edited by: shamulheq on Dec 22, 2009 7:52 AM

    Shamulheq
    I am a little unclear of your requirements.
    SET/GET parameters (from 'user profile own data') generally only work when the field is displayed on a selection screen for a program.  The parameter will then automatically populate the field on the selection screen. 
    As it happens, the two parms WGR and WM1 you mentioned are not used by any programs that I can see.
    MM04 does not contain material group, assigning a set/get parm to your userid wouldn't change much anyway.
    If you are talking about making it easier for your users to select a material, based on materials assigned to a material group, then you could try the F4 help on Material 'L - Material by Material group'  Here, you could enter the MatGrp and then have  displayed a list of the materials that are assigned to that group.  From this list the user could select the appropriate material.
    If you are talking about pre-populating the Material Group field in ME51 (probably other screens as well), try using parameter MKL in your user parameters.  You should log off/log on after changing a SET/GET parameter to see the effect.
    If you are talking about PREVENTING a user from displaying materials outside of a particular MatGrp, then you should consult with your authorization team to see if they can provide a solution.
    Rgds,
    DB49

  • Check a group assigned to which role

    Hi,
    I have a group called as "GroupOne". There are no roles/users assigned to this. Now, how can we check whether any roles has added group "GroupOne" to its Assigned Groups under Identity Management.
    I know its a silly question, but I am not able to figure it out.
    Regards,
    Vaibhav

    Generally  users will be added to a relevant groups and each group will be added to the corresponding roles.  This is a general practice.
    Some times groups will be added to other groups as child groups where they will inherit the roles.
    So when you go to a group and try to check the roles without using the search recusively check box option, it will display diect roles that are assigned to the group.
    IF you check the check box recursivey and search then you will get all direct and indirect roles inherited from othere groups as well.
    Raghu

Maybe you are looking for