Error:-They have not been assigned  to VMS role

Hi.
When i enter t Code VELO it shows me error
"They have not been assigned  to VMS role"
this error was not there when there was no configuration.
Reg,
Amol

Hi,
As far as I know, you need to maintain business org details (like org name, positions, business partners etc) in the ppoma_crm tcode. Then have to assign a position to your user ID. This assigns the business role as well.
This link should be helpful:
http://www.sapcrmsecurity.com/SAP%20CRM%20Business%20Role.html
Regards,
Srikishan

Similar Messages

  • Logon is not possible because you have not been assigned to a business role

    I am getting the message u201CLogon is not possible because you have not been assigned to a business role; contact your system administratoru201D when I try to access an incident ticket SMIN I created in SolMan 7.1. I have seen this exact error in lower releases and was able to resolve it by making sure the business partner had a General and an employee configured. Unfortunately on 7.1 I have both but I still canu2019t open the message I created. Same error if I test SICF service /default_host/sap/bc/bsp/sap/ crm_ui_start. I have gone through SOLMAN_SETUP IT Service Management and Generate BP Automatically but no luck so far. Any ideas? Thank you,
    David

    Hi,
    As far as I know, you need to maintain business org details (like org name, positions, business partners etc) in the ppoma_crm tcode. Then have to assign a position to your user ID. This assigns the business role as well.
    This link should be helpful:
    http://www.sapcrmsecurity.com/SAP%20CRM%20Business%20Role.html
    Regards,
    Srikishan

  • Is it possible to see which photos have not been assigned to an album?

    I have a lot of photos on my ipad.  Most of them have been assigned to an appropriate album, but not all.  I would like to see which photos have not been assigned yet so I can make sure nothing's missing from an album.  Is there a way to do this?

    If you still have your receipt, the serial number could be on there.  If you registered your iPhone, call Apple Customer relations.  They should be able to help you.  
    You should also post in the iPhone forum area. 

  • Is there a way to stop iPhoto storing my photo stream photos on the mac hard drive when enabled? They have not been imported to my library. I have no photos saved on my MacBook Air yet 50gb of Hardrive space is taken up by photos.

    Is there a way to stop iPhoto storing my photo stream photos on the mac hard drive when enabled? They have not been imported to my library. Is there a way to stop iPhoto storing my photo stream photos on the mac hard drive when enabled? They have not been imported to my library. I have no photos saved on my MacBook Air yet 50gb of Hardrive space is taken up by photos. When I turn off photo stream on iCloud preferences the memory is freed up. I like to be able to access my icloud photo streams on
    my macbook but it has a small Hardrive and loosing that much space is annoying and it kind of voids the point of photo streams. Is there a way I can stop
    this ?

    Is there a way I can stop
    this ?
    No, Photo Stream is syncing with iCloud. The most recent 1000 photos in iCloud will be buffered on your mac, even if you do not import them to your photo library, if you enable My Photo Stream.
    See this link:   iCloud: Photo Stream FAQ
    iCloud pushes all your photos to the My Photo Stream album on your devices and computers, and manages them efficiently, so you don’t run out of storage space.

  • Logon is not possible because you have not been assigned to a business role; please contact your system administrator

    Hi experts,
    I'm having a problem when our project approaching the end.
    If I assigned the business role in parameter CRM_UI_PROFILE and PFCG role in SU01.
    It works fine,and the user can logon the web ui.
    Now I created a new organization model and position,assigned the business role and user to the position.
       A PFCG role was also assigned to the business role:
    Then I removed all the roles and profiles in user master in SU01.
    The user can not login CRM WEB UI and the system raised "Logon is not possible because you have not been assigned to a business role; please contact your system administrator".
    Can anybody suggest what the problem is? Is there any other settings I should make?
    I suppose that,since the user was assigned to the position the organizational model, the system can determine the user's business role, and through the business role, the corresponding PFCG role can also be determined.
    Am I correct?
    Thanks.
    Jerry

    Jerry, yes, you're right.
    Let me point you to pretty good explanation right here: Logon is not possible because you have not been assigned to a business role; please contact your system administrator
    So business role determination is taken in three steps (you can observe them in class CL_CRM_UI_PROFILE_DETERM method LOAD_PROFILES):
    1. From user's parameter  CRM_UI_PROFILE (method LOAD_FROM_USER_PARAMETER);
         If  CRM_UI_PROFILE = * then the user needs to have S_DEVELOP authorization object with OBJTYPE = 'DEBUG' (debug authorization).
    2. If not found on previous step: From organizational management (method LOAD_FROM_ORG_MANAGEMENT)
    3. If not found on previous steps: Based on PFCG roles (method LOAD_FROM_PFCG_ROLE);

  • TS3694 updating ios7 my iphone 4s has gone into restore mode and asking me to plug into itunes, im then getting an 3004 error. i have not been able to use my phone since doing this. can anyone help ?

    updating ios7 my iphone 4s has gone into restore mode and asking me to plug into itunes, im then getting an 3004 error. i have not been able to use my phone since doing this. can anyone help ?

    http://lmgtfy.com/?q=iPhone+error+code+3004

  • Having a hard time transferring photos from MacBook Pro once they have been cropped or colored enhanced to my iPhone or iPad. If they have not been manipulated then they transfer fine. How can I fix this?

    I've been cropping and editing pics in my MacBook Pro but once I try to transfer them to the iPhone or iPad 2 only the photos that have not been manipulated transfer with no problems. How do I solve this problem?

    Option 1:
    Go to your Pictures Folder and find the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed.
    Look there for the iPod Photo Cache.
    Trash it. Start iPhoto and try sync again.
    If that fails:
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Use the option to check and repair library permissions
    Regards
    TD

  • Though my settings are to refresh my podcasts every hour, lately they have not been refreshed at all

    Mac mini 2.3 GHz Intel Core i5 running 10.8.2, 192 GB free
    8 GB memory, using 5 GB
    iTunes 11.4
    Ever since I upgraded (by force) to iTunes 11.4 I have been having quirks (like when I hit the word Podcasts in the Library panel there is always a delay in going to that screen, and I am constantly being barraged with messages asking if I still want to receive certain podcasts because I haven't listened to them in awhile, which is often untrue), but over the holiday weekend I began to notice that many of my podcasts were not refreshing, even tho' I have them set to refresh every hour. I starting looking in the iTunes store and discovered that there were several episodes of several different podcasts which had not been automatically downloaded, so I manually downloaded them. There may be more, as I haven't gone through them all.
    Also, on each of the pages in the iTunes store of each of the podcasts to which I subscribe it has a "subscribe" button, so I wonder why it says "subscribe" when I already am subscribed. I can't remember if in the past it read "Unsubscribe" for podcasts to which I already have a subscription.
    What could be causing this problem? My computer is always on, and this has never happened to me before in all the years I've been subscribing to podcasts.

    More info:
    I repaired my Disk Permissions twice, and each time I got a ton of corrections regarding iTunes. Here are just some of them (don't know what all the "Dutch" ones are about):
    Permissions differ on “Applications/iTunes.app/Contents/Resources/Dutch.lproj/AACEncoderConfig.nib”; should be drwxr-xr-x ; they are -rwxr-xr-x .
    Repaired “Applications/iTunes.app/Contents/Resources/Dutch.lproj/AACEncoderConfig.nib”
    Permissions differ on “Applications/iTunes.app/Contents/Resources/Dutch.lproj/AskUser.nib”; should be drwxr-xr-x ; they are -rwxr-xr-x .
    Repaired “Applications/iTunes.app/Contents/Resources/Dutch.lproj/AskUser.nib”
    Permissions differ on “Applications/iTunes.app/Contents/Resources/Dutch.lproj/AskUserWide.nib”; should be drwxr-xr-x ; they are -rwxr-xr-x .
    Repaired “Applications/iTunes.app/Contents/Resources/Dutch.lproj/AskUserWide.nib”
    Permissions differ on “Applications/iTunes.app/Contents/Resources/Dutch.lproj/AutofillSettings.nib”; should be drwxr-xr-x ; they are -rwxr-xr-x .
    Repaired “Applications/iTunes.app/Contents/Resources/Dutch.lproj/AutofillSettings.nib”
    Permissions differ on “Applications/iTunes.app/Contents/Resources/Dutch.lproj/BurnSettings.nib”; should be drwxr-xr-x ; they are -rwxr-xr-x .
    Repaired “Applications/iTunes.app/Contents/Resources/Dutch.lproj/BurnSettings.nib”
    Permissions differ on “Applications/iTunes.app/Contents/Resources/Dutch.lproj/CDInfo.nib”; should be drwxr-xr-x ; they are -rwxr-xr-x .
    Repaired “Applications/iTunes.app/Contents/Resources/Dutch.lproj/CDInfo.nib”
    Permissions differ on “Applications/iTunes.app/Contents/Resources/Dutch.lproj/ConvertID3.nib”; should be drwxr-xr-x ; they are -rwxr-xr-x .
    Repaired “Applications/iTunes.app/Contents/Resources/Dutch.lproj/ConvertID3.nib”
    Permissions differ on “Applications/iTunes.app/Contents/Resources/Dutch.lproj/EQPresets.nib”; should be drwxr-xr-x ; they are -rwxr-xr-x .
    Repaired “Applications/iTunes.app/Contents/Resources/Dutch.lproj/EQPresets.nib”
    Permissions differ on “Applications/iTunes.app/Contents/Resources/Dutch.lproj/ErrorReportDialog.nib”; should be drwxr-xr-x ; they are -rwxr-xr-x .
    Repaired “Applications/iTunes.app/Contents/Resources/Dutch.lproj/ErrorReportDialog.nib”
    Permissions differ on “Applications/iTunes.app/Contents/Resources/Dutch.lproj/FormatPopup.nib”; should be drwxr-xr-x ; they are -rwxr-xr-x .
    Repaired “Applications/iTunes.app/Contents/Resources/Dutch.lproj/FormatPopup.nib”
    Permissions differ on “Applications/iTunes.app/Contents/Resources/Dutch.lproj/HomeSharingServerSettin gs.nib”; should be drwxr-xr-x ; they are -rwxr-xr-x .
    Repaired “Applications/iTunes.app/Contents/Resources/Dutch.lproj/HomeSharingServerSettin gs.nib”
    Permissions differ on “Applications/iTunes.app/Contents/Resources/Dutch.lproj/ImportSettings.nib”; should be drwxr-xr-x ; they are -rwxr-xr-x .
    Repaired “Applications/iTunes.app/Contents/Resources/Dutch.lproj/ImportSettings.nib”
    Permissions differ on “Applications/iTunes.app/Contents/Resources/Dutch.lproj/InfoDialogArtworkView.n ib”; should be drwxr-xr-x ; they are -rwxr-xr-x .
    Repaired “Applications/iTunes.app/Contents/Resources/Dutch.lproj/InfoDialogArtworkView.n ib”
    Permissions differ on “Applications/iTunes.app/Contents/Resources/Dutch.lproj/InfoDialogInfoView.nib” ; should be drwxr-xr-x ; they are -rwxr-xr-x .
    Repaired “Applications/iTunes.app/Contents/Resources/Dutch.lproj/InfoDialogInfoView.nib”
    Permissions differ on “Applications/iTunes.app/Contents/Resources/Dutch.lproj/InfoDialogLyricsView.ni b”; should be drwxr-xr-x ; they are -rwxr-xr-x .
    Repaired “Applications/iTunes.app/Contents/Resources/Dutch.lproj/InfoDialogLyricsView.ni b”
    Permissions differ on “Applications/iTunes.app/Contents/Resources/Dutch.lproj/InfoDialogMultipleInfoV iew.nib”; should be drwxr-xr-x ; they are -rwxr-xr-x .
    Repaired “Applications/iTunes.app/Contents/Resources/Dutch.lproj/InfoDialogMultipleInfoV iew.nib”
    Permissions differ on “Applications/iTunes.app/Contents/Resources/Dutch.lproj/InfoDialogMultipleItem. nib”; should be drwxr-xr-x ; they are -rwxr-xr-x .
    Repaired “Applications/iTunes.app/Contents/Resources/Dutch.lproj/InfoDialogMultipleItem. nib”
    Permissions differ on “Applications/iTunes.app/Contents/Resources/Dutch.lproj/InfoDialogMultipleOptio nsView.nib”; should be drwxr-xr-x ; they are -rwxr-xr-x .
    Repaired “Applications/iTunes.app/Contents/Resources/Dutch.lproj/InfoDialogMultipleOptio nsView.nib”
    Permissions differ on “Applications/iTunes.app/Contents/Resources/Dutch.lproj/InfoDialogMultipleSorti ngView.nib”; should be drwxr-xr-x ; they are -rwxr-xr-x .
    Repaired “Applications/iTunes.app/Contents/Resources/Dutch.lproj/InfoDialogMultipleSorti ngView.nib”
    Permissions differ on “Applications/iTunes.app/Contents/Resources/Dutch.lproj/InfoDialogMultipleVideo View.nib”; should be drwxr-xr-x ; they are -rwxr-xr-x .
    Repaired “Applications/iTunes.app/Contents/Resources/Dutch.lproj/InfoDialogMultipleVideo View.nib”
    Permissions differ on “Applications/iTunes.app/Contents/Resources/Dutch.lproj/InfoDialogOptionsView.n ib”; should be drwxr-xr-x ; they are -rwxr-xr-x .
    Repaired “Applications/iTunes.app/Contents/Resources/Dutch.lproj/InfoDialogOptionsView.n ib”

  • Can't group elements , although they have not been locked.

    Hello out there ...
    I am selecting all elements within a slide using the shift key; however, the "group" command remains inactive. I have not not "locked". The master slide in question is "title and bullets - left".
    What am I doing wrong, or not doing ?
    Tks for any help.
    jc

    Thank you Brian.
    I was hoping for a few more replies, but it's a matter of trying things out I guess. I am new at Keynotes, but I am learning. I took a "One to One" lesson in Melbourne, which although expensive, was very profitable. I think it's a fantastic program.
    Tks again
    jc

  • My iTunes is suddenly saying both my iPod & iPhone are synced with another computer, which they have not been.

    I recently lost all of the music from my laptop's hard drive, and therefore from i-Tunes.  I still have all of my music on my iPhone (3GS) (and a smaller version on my iPod Touch (3)), however when I try to sync them iTunes says the devices are synced with another computer & the only options I have is to erase the iPhone/iPod & sync with the very little music that has been able to be recovered back into iTunes, or to transfer the purchases.  I have checked the computer is authorised for my iTunes account, and have transferred the purchases back.  I really don't want to have to reload my CDs on when they are all on other devices.
    Does anyone know why iTunes is suddenly not recognising devices it did previously, and how I get it to recognise them again?  And most importantly, how I can transfer the music on my iPhone/iPod back into the laptop's iTunes?

    The music was accidentally deleted as I was cleaning up my SafeSync account (like a Cloud) & I unwittingly deleted My Documents & My Music from my hard drive as I did so - these are the only files that were affected.  So no catastrophic issue apart from me not knowing what I'm doing.
    And IT guy performed a recovery for me but was only able to retrieve about 10% of my documents and only 45 songs of the 1700 or so I had.  There is no up to date back up of my computer - trust me I've learnt a lesson there.
    Since then iTunes doesn't recognise my devices as being synced to that computer, but there is no other computer for them to be synced to so I don't understand how this happened or how to fix it.  I understand that my devices aren't back ups, but it seems stupid to lose the 1700 songs I have on my iPhone.  I have transferred the purchases, but the majority of them are songs I've loaded from CDs & obviously it would be a very time consuming process to try to reload all of them - obviously something I would like to avoid if possible.

  • I have been having scripting errors that have not been able to be resolved by any of the measures listed on your Help page.

    I've gone through the Help list under "Unresponsive Script Errors": I don't have Webroot SpySweeper; I tried letting the scripts run longer (selecting "Continue") but they keep coming up; my errors come up all the time, not just on certain websites; and I tried disabling add-ons to see if they were causing the problem, but they weren't. I have also completely cleared my cache several times and then updated Java, since I've heard outdated versions of this can cause scripting errors. I finally tried uninstalling and reinstalling Firefox (a clean reinstall, with no preferences saved), but that didn't work, either. Then I downloaded FileHippo and downloaded all other the updates it detected as being needed for my system, including Firefox Beta. Could my low RAM possibly cause my continued problems? Also, are scripting errors related to No Response errors? I am still getting these, too, after performing all except the most complicated remedial actions for them recommended on the Help page. (Both these types of errors started occurring for me at the same time.)

    The error often has the name of the extension in it in some manner, '''supply the message wording''' then at least we'd have an idea of what you see. Plus we really don't know what you did look at, or what you actually tried of what you did look at.
    For instance "AVG Free" shows something like tavgp in the message, if I recall correctly, so they aren't always real obvious unless you've seen it before.
    But if you really went through some of help pages you would have tried in Safe Mode, gone through the diagnostics, and almost certainly gone through all your extensions turning half off then have of those on or have of those just turned off back on again and repeat -- not fun but it doesn't take a real long time, but I'd rather try other ways first, because I have a lot of extensions and many are already turned off because of Firefox changes for the worse, certainly not because I don't need them.

  • Can I send reminders to fill out the form if they have not been completed?

    There is not a great response rate so I would like to remind people to fill out the form rather than sending it again.

    Formscentral has no ability to send reminders so you would have to do this via email assuming you know who all has tried to fill out your form.
    Andrew

  • Whenever I try to open iPhoto, a message comes up saying that 148 photos have been found in the iPhoto Library that have not been imported. It asks me if I want to import them and I say NO but then it places them in a recovered photo folder. I keep deleti

    Whenever I try to open iPhoto, a message comes up saying that 148 photos have been found in the iPhoto Library that have not been imported. It asks me if I want to import them and I say NO but then it places them in a recovered photo folder. I keep deleting the empty recovered photo files but it just keeps asking me every time I go to open iPhoto! I'd love to just get rid of the "found" photos (I can't open them anyway!)
    How do I get rid of them so that I can just open iPhoto straight up without this?
    Linda

    Open your iPhoto Library package with the Finder.
    Click to view full size
    look for a folder titled Import or Importing and move it to the Desktop. Launch iPhoto to see if the message goes away.  If there is no message  check the contents of the Import folder to see if you want to keep any of those image files (usually they have not been imported into iPhoto). If you want to keep them then drag the folder into the open iPhoto window to import.
    OT

  • Error while Creating new Position-Data fields have not been filled (no. 5A135)

    Dear Consultants,
    My client using SAP HCM form 2008, now they want to create new positions to the existing system,
    To create new positions I am using T Code : PP03, while creating I am getting error "Date Fields have not been filled- Error Message No - 5A135", I want to create the positions valid from 01.04.2014. please do needful why this error is coming
    Regards,
    Naresh

    Hi,
    It is mandatory to give the org unit to which the position is being associated with.
    Give the org unit and try saving it.
    Thanks,
    Sriram

  • Error while MIRO posting: Unique co code has not been assigned to co number

    Hi all
    I am getting the following error while posting MIRO-
    "A unique co code has not been assigned to co no". I think this might have to do something with CO no range. Is it so. Does any1 have any idea what this could be because of?
    Thxs in advance
    Hrishi

    Hi Vishnu
    Thxs for ur immediate reply. But cross co conttrolling is not active in my case. The error diagnosis reads as follows-
    Doc breakdown is active in ur system. In certain cases, a co code is derieved frm the Co ID no and this must lead to the assignment of a unique co code.
    A unique co code could not be assigned to Co no.
    Message No GLT0001

Maybe you are looking for

  • Openchrome and 3D accel

    Hi, I have an old laptop with a via KM400 graphics chipset, and I wonder if I can had 3D acceleration with openchrome driver ? I have tried both xf86-video-openchrome and xf86-video-openchrome-git with Arch lts kernel, and I still have the following

  • Problem working on member formulas in ASO cube

    Hi I was asked to convert a planning application BSO cubes into a single ASO cube.I have managed to convert one BSO Cube into ASO through EAS console and added the members in the other BSO cube throgh rulesfile. Now i have to write the member formula

  • BOXI r2 - SSO in Active Directory multi domain

    Hi all, I have a customer with XI r2 on windows and infoview deployed on Tomcat. Security is (OK until yesterday) sedWinAD with SSO via Vintela. Yesterday they have add a new domain in krbc5.ini and new domain's users cannot login. Tomcat trace repor

  • Change name of IntermediateCA

    I changed the host name of my server and would now like to change the name of my IntermediateCA which is still showing the old host name. Is this possible? I would like to associate the new IntermediateCA with Profile Manager to sign configuration pr

  • How to transfer videos to PC

    I would like to transfer my camera roll's videos from my iPhone 5s to my Windows PC without using cables. I have set up iTunes Wi-Fi sync. Is it possible to offload videos via iTunes Wi-Fi sync? Is there any other method?