Error third party app

Trying to download an third party app on my 8900, the company send me a link which I click on then a screen appears asking to set permissions I have tried downloading with this box checked and unchecked. So then I download and get download successful. i then go to my download file click on icon of new app and every time i get this error; Uncaught exception:width/offsets arguments
>> cannot be negative or exceed the text lenghth
I have done this 5 times any help or suggestions please.

Hi and Welcome to the Forums!
It sounds as if the app is not 100% compatible with your model BB. Did you ask the maker of the app if they are certified for your BB?
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

Conflict with Third Party Apps?

I am getting an occasional error saying there is a possible conflict with third party apps and that I need to check the drivers of my MIDI devices to see if they are up to date? Sorry but I did not record the exact wording. Does anyone know what this might mean, and how I need to go about checking drivers? I have a lot of interfaces and not sure how to see what's what. Thanks.

Hi Midlake,
Well, because they are known troublemakers. Search for 'takes' or 'take folder(s)' or 'comp' here on the forum and you'll find many a troubled soul crying out for help - including seasoned pro's, who thought they were beyond tears...
O, they are fine for recording many takes - but thats' all. I'll select the best takes/phrases.
regards, Erik.

ERROR: DW006: Apple Package failed to install successfully. ERROR: Third party payload installer Adobe Acrobat XI Pro Installer.pkg failed with exit code: 1

Hi All, anyone with this problem with Acrobat Pro XI, IM USING MAC, also Yosemite if that helps.
Also Adobe CC, BASICALLY IT just quit and i had to uninstall, re install, and I get this
ERROR: DW006: Apple Package failed to install successfully.
ERROR: Third party payload installer Adobe Acrobat XI Pro Installer.pkg failed with exit code: 1
Anyone with same issues...

Same problem. Creative Cloud subscriber running Mac 10.10.2 on iMac (Retina 5K, 27-inch, Late 2014). All apps work fine EXCEPT for Adobe Acrobat XI. I have tried 100 times and 100 solutions. NOTHING works.

Access to my Office 365 third-party app for external user : "a User account is not registered for the account"

In my third-party web application of Office 365, I want to have access to the contacts, events and emails of all the users from the organizations who installed my app. The thing is I don't want that all these users have to grant me access, I just want one
admin of the org to grant access for my app and then be able to retrieve the data I need for all the users.
To test for one organization, I logged in as the admin and proceed to the Oauth2 authentication to retrieve the access token and in the first request (the GET one to retrieve an authorization code) i add the parameter
prompt=admin_consent.
With this access token, I can access the data (emails, contact, event) of the admin
for instance for the contacts
uri: https://outlook.office365.com/ews/odata/Users(adminemail)/Contacts
but not the data of the other users of this org with this uri
uri: https://outlook.office365.com/ews/odata/Users(useremail)/Contacts
The only thing I can do is retrieve an access token for each user but it supposed that each user has to authorize the access to the app but it's very cumbersome. So, i don't see what enables the parameter prompt=admin_consent and how to use it. Does anybody
know what it does?
And my question is: how can I do to access the data of all the users of one organization when the access has been granted by one admin?
Thank you!

This was answered on StackOverflow by Dushyant Gill. http://stackoverflow.com/questions/25316175/access-to-my-office-365-third-party-app-for-external-user-a-user-account-is-n/25316678#25316678
You are sending the OAuth request to a tenant specific endpoint of Azure AD. Note the {key_provided} part of your Url - that part represents the tenantid or a registered domain name of an Azure AD tenant. Azure AD throws this error is the user signing in
is not a user in that tenant.
Multi-tenant applications like yours have two options:
Perform home realm discovery yourself and send the SSO request to the correct tenant-specific endpoint of Azure AD: when a new Azure AD organization signs-up for your application, record its tenant ID, and registered domain names. On your login page, ask
the user for their email and try to discover what Org they belong to using the suffix the email.
Use the common endpoint of Azure AD. Instead of the {key_provided} part of the URL, use 'common'. In this case Azure AD will determine the user's tenant and sign-in the user. The token that your application will receive will still be from the user's tenant
(iss claim).
2 is more convenient for apps. However #1 has an advantage when the user's Organization has customized their sign-in page with the company logo etc - in the case of #1 the user will directly be taken to the customized and familiar sign-in page.
I recommend a combination of the two: try determining the user's organization and sending them to the tenant specific SSO endpoint. If you're not able to - send them to the common endpoint.

Third party apps disappear after updates

I have several third party apps installed, including dropbox, windows office 365 suite, and google drive, among others. When my Macbook Pro updates, those apps are automatically uninstalled. The icons remain on the bar, but when clicked, produce a gray ? indicating that they are no longer installed. This has been happening since I have been using this Mac (approximately 16 months). I am able to reinstall the apps and they function as normal. This has become a very frustrating aspect of using my Macbook.

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx ' ' 879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 2883943871 3873345487 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' ' s/^.+ |\(.+$$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne 'Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|NVDA$|pagin|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 54 12 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

I am getting a installation failed for photoshop, illustrator,and dreamreaver ---- Payload: Microsoft Visual C++ 2012 Redistributable Package (x64) 11.0.61030.0 {3E272A93-C06B-4206-AD02-0EBE02535E20} ----------- ERROR: Third party payload installer vcre

i am getting a installation failed for photoshop, illustrator,and dreamreaver ---- Payload: Microsoft Visual C++ 2012 Redistributable Package (x64) 11.0.61030.0 {3E272A93-C06B-4206-AD02-0EBE02535E20} ----------- ERROR: Third party payload installer vcredist_x64.exe failed with exit code: -2147024546 ERROR: Failed to install Microsoft Visual C++ 2012 Redistributable Package (x64). Please try installing it by double clicking on the executable at "C:\Users\randy\AppData\Local\Temp\{2246675D-5215-4CA7-BE30-569ED38C5D9B}\Photoshop_15_LS 20_win64\Adobe CC 2014\payloads\Microsoft VC 2012 Redist (x64)\vcredist_x64.exe", or download and install the latest Microsoft Visual C++ 2012 Redistributable Package (x64) from Microsoft website - www.microsoft.com

Navigate to Control Panel>Programs>Program and Features.
under Program and Features , locate the option " Microsoft Visual C++ 2012 Redistributable Package (x64)" and right click on it and uninstall .
If prompted , restart and then uninstall .
Once you had uninstalled Microsoft Visual C++ 2012 Redistributable Package (x64) .
Click on on the below link and download new Microsoft Visual C++ 2012 Redistributable Package (x64) ( vcredist (x64).exe file and install the same :
http://download.microsoft.com/download/1/6/B/16B06F60-3B20-4FF2-B699-5E9B7962F9AE/VSU_4/vc redist_x64.exe
Once you had successfully installed Vcredist_x64.exe , Launch Creative Cloud desktop application and try to install CC apps .
Let me know if you need further assistance.

I try to install lightroom 5.6 and receive Exit Code: 7 ERROR: Third party payload installer Adobe_Lightroom_x64.msi failed with exit code: 1603

Exit Code: 7
Please see specific errors below for troubleshooting. For example, ERROR:
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 3 error(s)
----------- Payload: Adobe Photoshop Lightroom 5 5.6.0.0 Adobe_Lightroom_x64.msi_5.6 -----------
ERROR: Schlüssel ist im angegebenen Status nicht gültig.
ERROR: Install MSI payload failed with error: 1603 - Schwerwiegender Fehler bei der Installation.
MSI Error message: Schlüssel ist im angegebenen Status nicht gültig.
ERROR: Third party payload installer Adobe_Lightroom_x64.msi failed with exit code: 1603

Same problem. I have CC installed on Win 7 with all other apps working fine. Tried to install Lightroom 5 and got:
Exit Code: 7
Please see specific errors below for troubleshooting. For example, ERROR:
- 0 fatal error(s), 3 error(s)
----------- Payload: Adobe Photoshop Lightroom 5 5.7.0.0 Adobe_Lightroom_x64.msi_5.7 -----------
ERROR: Error 1935.An error occurred during the installation of assembly component {5C21D397-1DA5-
3749-8C1F-165F21DE9E3E}. HRESULT: 0x80070003.
ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
MSI Error message: Error 1935.An error occurred during the installation of assembly component
{5C21D397-1DA5-3749-8C1F-165F21DE9E3E}. HRESULT: 0x80070003.
ERROR: Third party payload installer Adobe_Lightroom_x64.msi failed with exit code: 1603
I uninstalled all Adobe CC software, ran Adobe CC Cleaner, cleaned my Registry using Piriform CCleaner 5, rebooted and reinstalled CC from scratch. Same problem--everything else installed correctly except Lightroom 5. Also tried uninstalling KB2918614--no joy.
Dayton

Third-Party Apps Crashing After Update

After getting the new update for my 8GB iPod Touch, I discovered my third-party apps no longer worked--they would briefly seem to boot up before crashing to the desktop. I fixed this problem by restoring my iPod, reinstalling everything, resyncing music (which took several hours). But then when I connected my iPod Touch to charge it, it said it wasn't finished restoring it or something. I said to finish; it soon says the restoration failed with a maddeningly vague error message (-34), some of my third-party apps crash again, and all my music is gone. What is going on, and is Apple taking steps to fix this problem with the new OS? Is there any way to revert to OS3?

Here is what I did & my phone now works fine:
Ok. I went back to the apple store. They reloaded the IOS6 software from a computer they knew had a good version of the software and treated the phone as if it was a new phone. We did not back it up from my pervious backups. I then reloaded all the apps from the app store and not my computer. My phone is working great now. It appears I had a corrupted copy of the IOS 6 or a corrupted app that was causing the problem and it syncing just fine without the problem returning.

Many Third Party Apps crash when interacting with Finder

Hi everyone,
I am having a bit of an issue with OS X Mavericks v10.9.4.
Lately, whenever I try to do any 'Finder interactions' (Open, Save, etc) with third-party apps like Google Chrome, Brackets, and Photoshop*, it instantly shuts the program down, showing me a Problem Report, which doesn't really help me out, because I can't really understand it.
*Replicating the error is easy on both Google Chrome and Brackets, but not on Photoshop.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if iTunes crashed, you would enter "iTunes" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
          DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

HR with third party app?

looks like Strava and Runkeeper apps on the watch don't display HR. Is Apple blocking the HR output for third party apps? I want to find a good app to track my runs and other cardio workouts but also want to display HR on the watch.

Hi,
As the error message suggests, it is not supported to add this app into a site template. To work around this issue, it is recommended to remove this app from your
site before saving it as template.
The KB article below would provide more details about this issue:
https://support.microsoft.com/en-us/kb/2885566?wa=wsignin1.0
To install this app to the specific sites you want in a batch, administrators can also use the App Catalog to push apps to specific site collections, managed paths,
and site templates.
More information about this:
http://blogs.msdn.com/b/richard_dizeregas_blog/archive/2013/03/04/sharepoint-2013-app-deployment-through-quot-app-stapling-quot.aspx
https://msdn.microsoft.com/en-us/library/office/fp179896.aspx?f=255&MSPPError=-2147217396
I would also suggest you submit a feedback to the Office Developer Platform if there any expectation about the future version of Office 365 SharePoint Online:
http://officespdev.uservoice.com/
It
is a place for customers provide feedback about Microsoft Office products. What’s more, if a feedback is high voted there by other customers, it will be promising that Microsoft
Product Team will take it into consideration when designing the next version in the future.
Thanks
Patrick Liang
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Support for Third Party Apps when they take your money and don't respond

Does Blackberry App do anything about third party apps that take your money and then don't give you what you paid for or respond? I paid $4.99 for Jeweled game from getempower, it downloaded and worked a bit, then it said I needed to Register. When I clicked Register, nothing happened, it just said "checking registriation" forever. I clicked on the Support Email provided and it returned an error saying "We get too much spam so you can't email us anymore, so please go to our website for support." So I went to the website www.getempower.com, and got to the Support form and filled it out, and it said "you cannot submit form until you choose the app" but when I tried to choose the app it wouldn't let me. I can't see anywhere else on the web page to contact them. So I paid for the game but it won't let me get to it. I looked at the reviews and it looks like several other people have had this same problem. I guess I thought buying something through App World would be trustworthy - App World, do you stand behind the vendors you allow to sell on your site?

Hi and Welcome to the Community!
Firstly, as a user-to-user community, no one here can answer your question with any level of authority whatsoever. This site is not a channel for any formal communications with RIM. All support starts with the carriers, authorized resellers, and authorized service centers, all who can escalate cases into RIM at no charge to the end user...and that is the required path for formal support for issues such as yours (including requests for refund, if you choose to go that route). So, your escalation path is not here, in these forums.
But, have you tried removing and resinstalling the app? And/or clearing the AppWorld cache?
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Notes on third-party apps closing (not really crashing) after a restore

Hello,
I'm adding the umpteenth message about a problem that, after happening basically with each single iPhone change since my old iPhone 3G onwards, I would say it's pretty common.
I have solved this problem recently with a third sequence of actions, so I'm posting my brief "history of restores" for the benefit of others. I hope I've tagged this post eloquently enough to make it easy to find.
So, in most (if not all) cases of previous restores I've bumped in the classic issue where after the restore process (which, BTW, involves always a few more sudden phone restarts than expected) only the "native" iPhone apps run normally. All the others appear for an instant and then close. They don't really crash because both in iOS 6 and iOS 7 you can see them as "running" by double-tapping the iPhone front button. Moreover, those with active notifications will actually notify the user regularly. Their UI, though, doesn't go past the splash screen.
The underlying cause, also considering it relates only to apps downloaded via App Store, is presumably some DRM-related information that gets messed up during the restore process.
My personal experience included previously two distinct solutions, and each of those only worked in that occasion, i.e. has been useless in the other cases:
The oldest, and still most documented solution, was just to download, via iPhone, a new app from the app store. After a restart, or maybe even without one, the new app and all the others started working.
The second, less mentioned online but still pretty widespread, was to sign out from the Apple Store on the iPhone, and then sign back in.
This time, where I got a replacement for my iPhone 4s because of the common problem of the Wi-Fi/Bluetooth chip getting "burned" or dislodged, I tried both the solutions above but they didn't work. In the process, I've found other possible solutions that didn't work:
Deauthorizing iTunes on the Mac and then reauthorizing it.
Getting a new app via iTunes and then syncing the iPhone
Sign out/in with iCloud on the iPhone.
I was therefore close to abandoning my 877 apps already configured and organized in folders in the previous backups, and willing to accept the burden of setting up the iPhone as a new phone.
Nevertheless, I still hoped that a "mixed approach" would work and, indeed, it worked.
Here is the sequence that worked in my latest case:
Restore the iPhone as a new phone
Open the App Store on the iPhone and get a new app, not among those already downloaded previously
Open that app and see that it works (actually, after an iPhone replacement steps 1-3 would make sense anyway to check that the phone works properly)
Start a restore from a previous backup
As soon as the apps start syncing again, open the first app already sync'd and check that it works. It should work, that's what happened to me, and so you can wait the whole time required to sync back all the apps.
My experience involves also a falsification of the statement that the problem resides on individual backups. This is false because I've used the same backup, at step 4, that I selected before going through 1-3 and that was not working initially. Moreover, after step 5, I've realized that the old backup I had used was too old because yesterday evening, while I had my iPhone still misbehaving with third-party apps, I took a few pictures that would have gone lost using the old backup. I have then started again from step 4 with a backup from the night after the pics, when I was fiddling to fix my issues. Also the newer backup, clearly done while the apps where "bad", ended with all my apps working again.
Basically, once the "physical" phone runs third-party apps, than any backup would work. The (missing) authorization portion that causes the misbehaviour might be related to the phone IMEI, or some other piece of information that is not included in backups.
Does anyone know a specific thread here or blog post on some website where there is a collection of cases like mine?
I'm not looking forward to seeing what voodoo variation will be required the next time I replace my iPhone...
Hope this helps.
All the best,
Giovanni

Read this post: 10.8.5 Broke Camera Usage For 3rd Party Apps Like Skype
Another: isight not recognized in Skype after 10.8.5 upgrade
Don't panic. Skype simply needs to update its app.

Did latest iPhone update and now non of my third party apps work. They open then close immediately. I tried to restore but can't as my iphone wont sync with itunes now and I will loose my apps. Also my largest app "Sat Nav" has gone. Help ??

Hi All
I have run into problems with my iPhone 4. I hadn't done an update for a while so decided to get my itunes and iphone 4 up to date. I downloaded all the latest versions. However now non of my third party apps work and my largest one has vanished. I try and open them and they flash up and then close again. I thought the easiest thing to do was to restore so I tried to syn my apps onto itunes so I wouldn't loose them. However it won't let me sync the apps onto iTunes. It ill allow me to syn the old version when I just started but since then I have bought a dozen other apps. Can anyone help. thanks

Well this won't work for me...
I had all of my apps and music stored in iTunes, I updated to the newest 9.2 iTunes and did a 4.0 update to my iPhone 3G all the while not noticing that EVERYTHING IN iTUNES was GONE. When I got done updating my iPhone it was late so i went to bed... Next day came back to sync everything and thats when I saw it was all gone...
http://support.apple.com/kb/HT1451
did what the link said and NOW I have all my 6K+ MUSIC back but not ONE APP. The App's are completely gone from when you nav. to the location the link says... There isn't a mobile sync folder there...
NOT SURE WHAT TO DO NEXT... Very Frustrated and MAD. I don't want to redownload all my apps manually. TO many to do it that way.

I purchased my iMac using the same (and only) Apple ID I use to purchase apps. Third-party apps update fine, but the apps that came with my iMac (iPhoto, iMovie, etc) bring up a message saying I have to log in with the account I used to purchase them.

I used my only Apple ID to purchase my iMac (Intel-based one). I've never been able to update core apps that came with it. I can update third party apps I've bought (like Coda), but when I try to update Garage Band, iPhoto, iMovie and so on, a popup message appears saying "You have updates available for other accounts" and "Log in with the account you used to purchase this app in order to update it", or similar (see screenshot above).
The OS seems to get its updates fine - it's just the core apps from the App Store.
I've only ever had one Apple ID, so I have no idea what to do. I went to ask the Genius bar at my local Apple store, and they couldn't help, and insisted that I must have purchased the iMac using a different account, but I definitely didn't. There are a few posts on non-Apple forums of this happening to other people, so it must be a rare bug.
I'm a little concerned it may affect my ability to update from Lion to Mountian Lion. Can anyone help?
Dan

Have you done a Disk Repair and a Disk Permissions Repair?
If that doesn't resolve the problem I would suggest calling customer support about this issue as it is most likely on their (Apple's) end that the problem exists.

Formatting music from windows to a mac using third party app

i used a third party app so that i could download music from a pc onto my os x formatted ipod. initially it worked when i moved the music into my itunes library on my mac, but for some reason now a lot of the tracks won't play and my computer freezes if i press play on any track that originally was downloaded onto a pc. is there a way to identify where the songs came from and then delete then from the library without going through each one a seeing if it will play and then having to force quit itunes because it freezes?

From what I know, windows will not recognize the complicated data of a mac formatted device; hence not recognizing it. Macs can recognize a windows formated ipod though, so if you decide to reformat it on windows, then you can use it on both computers. If you dont though, looks like you are out of luck, sorry.
Hope I helped.

Error third party app

Similar Messages

Maybe you are looking for