Error. This extension cannot be installed, since it conflicts with an existing one. To install this extension, please remove the extension 'GuideGuide' which has been installed in", then install again.

When I try to install GuideGuide extension this error message popups " This extension cannot be installed, since it conflicts with an existing one. To install this extension, please remove the extension 'GuideGuide' which has been installed in", then install again."
Photoshop CC

Hi,
Have you ever uninstalled Photoshop CC and installed Photoshop CC 2014, or uninstalled Photoshop CC 2014 then installed Photoshop CC?
If that, please re-install you uninstalled Photoshop, and remove GuideGuide from Extension Manager before uninstall.
Another option is remove extension manager database file, then launch Extension Manager to install it.
C:\ProgramData\Adobe\Extension Manager CC\Configuration\DB\ExMan.db (Windows)
/Library/Application Support/Adobe/Extension Manager CC/Configuration/DB/ExMan.db (MAC)
But please notice that all your previously installed extensions will not be shown in Extension Manager after you removed database file.

Similar Messages

When trying to install an extension in Photoshop CC 2014, I get this error: "This extension cannot be installed, since it conflicts with an existing one. To install this extension, please remove the extension 'GuideGuide' which has been installed in ", th

After installing Photoshop CC 2014 I went in and removed all other versions of Photoshop and it seems like extension manager is still seeing my old extensions and not allowing me to update them for 2014. Any help would be appreciated!

Remove the EM database file as described here:
https://forums.adobe.com/thread/1517855?q=guideguide
It worked for me!

How can I install an extension when it conflicts with an existing one that doesn't appear in the list of extensions?

I'm trying to install Guide Guide for Photoshop CS 2014 using the Adobe Extension Manager CC but when clicking on the 3.1.2-guideguide.zxp I recieve the following error, "This extension cannot be installed, since it conflicts with a existing one. To install this extension, please remove the extension 'GuideGuide' which has been installed in ", then install again." Note that there is some code breaking in there where ", is. When I open Adobe Extension Manager CC there are no extensions listed. None under any of the products to the left. I can't uninstall it if it's not listed.
After reviewing the forums I have gone into my %appdata%\Roaming\Adobe\ folder and removed all folders for previous versions of Adobe Extension Manager.
Any help with this issue would be appreciated. Thank you for your time.

Please delete "C:\ProgramData\Adobe\Extension Manager CC\Configuration\DB\ExMan.db" then retry. Note that "C:\ProgramData" is hidden by default. You can input C:\ProgramData in the address bar of Windows Explorer then press "Enter" key to go into this folder.

Old computer died and I am trying to install Illustrator CS5 on new computer. Last version I had before CS5 was/is Illustrator 10, which has been installed in new computer. CS5 install says I need CS2,3, or 4 before installing 5, but old computer went dir

Old computer died and I am trying to install Illustrator CS5 on new computer.
Last version I had before CS5 was/is Illustrator 10,which has been installed on new computer.
CS5 install says I need CS2,3 or 4 before installing 5, but old computer went directly from 10 to CS5.
How can I repeat this 10 to CS5 install?

It does not seem likely that CS6 was upgraded from version 10. You might want to check your purchase history in your Adobe account to see if there is some missing link in the chain of purchases you made.
You can always try contacting Adobe support thru chat to see if they can find information or otherwise assist you in this matter.
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

Error -1074384569; NI-XNET: (Hex 0xBFF63147) The database information on the real-time system has been created with an older NI-XNET version. This version is no longer supported. To correct this error, re-deploy your database to the real-time system.

Hello
I have a VeriStand-Project (VSP) created with my Laptop-Host (LTH) which works with my PXI, while
deploying it from my LTH. Then I have installed the whole NI enviroment for PXI and VeriStand use on a
industrial PC (iPC). I have tried to deploy my VSP from the iPC to the PXI but the following error
message arose on my iPC:
The VeriStand Gateway encountered an error while deploying the System Definition file.
Details: Error -1074384569 occurred at Project Window.lvlibroject Window.vi >> Project
Window.lvlib:Command Loop.vi >> NI_VS Workspace ExecutionAPI.lvlib:NI VeriStand - Connect to System.vi
Possible reason(s):
NI-XNET: (Hex 0xBFF63147) The database information on the real-time system has been created with an
older NI-XNET version. This version is no longer supported. To correct this error, re-deploy your
database to the real-time system. ========================= NI VeriStand: NI VeriStand
Engine.lvlib:VeriStand Engine Wrapper (RT).vi >> NI VeriStand Engine.lvlib:VeriStand Engine.vi >> NI
VeriStand Engine.lvlib:VeriStand Engine State Machine.vi >> NI VeriStand Engine.lvlib:Initialize
Inline Custom Devices.vi >> Custom Devices Storage.lvlib:Initialize Device (HW Interface).vi
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * • Unloading System
Definition file... • Connection with target Controller has been lost.
The software versions of the NI products (MAX/My System/Software) between my LTH and the iPC are
almost the same. The only differences are:
1. LabView Run-Time 2009 SP1 (64-bit); is installed on LTH but missing on iPC. The iPC has a 32-bit system.
2. LabView Run-Time 2012 f3; is installed on LTH but missing on iPC.
3. NI-DAQmx ADE Support 9.3.5; something strage on the LTH, because normally I am using NI-DAQmx 9.5.5 and all other DAQmx products on my LTH are 9.5.5. That means NI-DAQmx Device Driver 9.5.5 and NI-DAQmx Configuration 9.5.5.. On the iPC side all three products are 9.5.5.. That means NI-DAQmx ADE Support 9.5.5, NI-DAQmx Device Driver 9.5.5 and NI-DAQmx Configuration 9.5.5..
4. Traditional NI-DAQ 7.4.4; The iPC has this SW installed. On the LTH this SW is missing.
In order to fix this problem I have formatted my PXI and I have installed the following SW from the iPC:
1. LabVIEW Real-Time 11.0.1
2. NI-488.2 RT 3.0.0
3. NI_CAN 2.7.3
Unfortunately the above stated problem still arose.
What can I do to fix this problem?
I found a hint on http://www.labviewforum.de/Thread-XNET-CAN-die-ersten-Gehversuche.
There it is written to deploy the dbc file againt.
If this is a good hint, so how do I deploy a dbc file?
I would feel very pleased if somebody could help me! :-)
Best regards
Lukas Nowak

Hi Lukas,
I think the problem is caused by differenet drivers for the CAN communication.
NI provides two driver for CAN: NI-CAN and NI-XNET.
NI-CAN is the outdated driver which is not longer used by new hardware. NI replaced the NI-CAN driver with NI-XNET some years ago, which supports CAN, LIN and the FLEXRAY communication protocol.
You wrote:
In order to fix this problem I have formatted my PXI and I have installed the following SW from the iPC:
3. NI_CAN 2.7.3
NI CAN is the outdated driver. I think that you should try to install NI-XNET instead of NI-CAN on your PXI-System, to get rid of the error message.
Regards, stephan

MAC Adobe Illustrator CS3 cannot be installed because it conflicts with Adobe Illustrator CS3

Model Name:iMac / Processor Name:Intel Core 2 Duo / Memory:4 GB
When I installed Illustrator CS3 at the first time, I didn't complete it and closed it. While I installed it again, it said "Adobe Illustrator CS3 cannot be installed because it conflicts with Adobe Illustrator CS3". I was be stopped on this step, so I deleted the Illustrator CS3 from Applications/Utilities/Adobe Installers without clicking it to uninstall. And I deleted other Illustrator CS3 files. After that, I tried to reinstall Illustrator CS3 again, but it kept to say "Adobe Illustrator CS3 cannot be installed because it conflicts with Adobe Illustrator CS3".
I cannot find any Illustrator in my MAC. What is wrong? How can I install Illustrator again? Should I format the computer and install all the applications again?

On the Adobe site probably under support do a search for Adobe CS 3 Clean Up Script.
Before running the script read the instructions al the instructions first, do not assume you understand from reading the first sentence. There are some files that are not so obvious that are necessary for activation and they are probably still around but they can only be removed by the script.
Next time you will have to read the instructions.
The only other ways around this is the do an archival reinstall of your system or if that does not work a complete reinstall of your system. Running the script is the easier and better way to do this but you must read the instructions completely first.

Cannot install, Photoshop CS3 conflicts with Photoshop CS3

Here's the correct sequence to uninstall the CS3 beta and install the final, shipping version of CS3:
1. DEACTIVATE the Photoshop CS3 beta;
2. Run the Adobe Uninstaller currently residing in your ./ Applications / Utilities /Adobe folder to uninstall the Photoshop CS3 beta;
3. Run the 'CS3Clean' script that has been posted to remove the bits and pieces that the uninstaller misses.
NOTE that you cannot just drag the CS3 beta folder to the Trash like you normally do with other Mac applications.
To install CS3:
1. Repair Permissions.
2. Install CS3 according to the instructions.
3. Repair Permissions AGAIN.
4. Activate the software.
here is the link to the clean script:
http://www.adobe.com/support/contact/cs3clean.html

*"HOW DO I RECTIFY THIS?! im pulling my hair out."*
Sorry, dude. No sympathy. You're committing software piracy and telling the whole world about it. Not smart. If you want to run Photoshop, then buy your own copy.
For help with (un)installing Photoshop for when you get your legit copy, I suggest you post your question on Adobe's discussion forums, as it's their product, not Apple's.

My 5th gen. ipod died and they replaced it with a new one, but I'm having problems getting the music. An error message says that its not authorized on this computer. The ipod is synced but it wont let me add what music I want.

My 5th gen ipod died and apple replaced it with a new one. I synced it up to the itunes that I already have on my computer but an error message keeps coming up telling me that its not authorized on this computer. What do I do?

About iTunes Store authorization and deauthorization
iPod: Troubleshooting songs and audiobooks that won't play
iPod does not play content purchased from the iTunes Store

When I try to sync my ipad using itunes I get the following message. This iPad cannot be synced. You do not have enough access privileges for this operation. Any ideas how this can be resolved?

When I try to sync my ipad using itunes I get the following message. This iPad cannot be synced. You do not have enough access privileges for this operation. Any ideas how this can be resolved?

See if the user tip helps: https://discussions.apple.com/docs/DOC-6562

I have a new MacBook Pro with OS10.8.2 and cannot get Contacts to print a list of addresses with pictures showing. There is a check box selecting "picture" which has been checked - but no picture. This worked fine on OS10.7.5. Problem??

I have a new MacBook Pro with OS10.8.2 and cannot get Contacts to print a list of addresses with pictures showing. There is a check box selecting "picture" which has been checked - but no picture. This worked fine on OS10.7.5. Problem??

First, back up all data immediately, as your boot drive might be failing.
There are a few other possible causes of generalized slow performance that you can rule out easily.
Reset the System Management Controller.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Check your keychains in Keychain Access for excessively duplicated items.
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

TS3322 While trying to sync my iPhone, I get this message "This iPhone cannot be synced. You do not have enough access privileges for this operation." Why don't I have this access privilege? How do I fix this?

While trying to sync my iPhone, I get this message "This iPhone cannot be synced. You do not have enough access privileges for this operation." Why don't I have this access privilege? How do I fix this?

See if the user tip helps: https://discussions.apple.com/docs/DOC-6562

Ever since I got the "new & improved" Firefox, I have had all kinds of problems the latest of which has left me without toolbars. How can I get back to the previous version?

# Question
Ever since I got the "new & improved" Firefox, I have had all kinds of problems the latest of which has left me without toolbars. How can I get back to the previous version? edit
IS THIS A GAME?
WHAT DETAILS DO YOU NEED?
THE COMPUTER HAS WORKED FINE
WITH THE OLD MOZILLA FIREFOX
FOR YEARS.
NO CHANGES HERE IN ANYTHING ELSE.

Click the Firefox button, go to Add-ons, then Plugins and disable the following: 
* Fun Web Products Plugin 
* My Web Search 
Both of these are adware/spyware and cause performance issues in Firefox.
Next, click the Extensions menu link (above Plugins where you are) and remove the "Ask Toolbar".
If the problem persists, please do the following: 
#Click '''Help '''| '''Restart with Add-ons disabled'''. 
#In the next menu which appears, checkmark: "'''Reset toolbars and Controls'''". 
#Finally, click the button called "'''Make changes and restart'''".
Just in case you weren't aware of it, you can right click the Back or Forward buttons to get a list of sites visited. If you'd like to see the return of the arrow on the Back button, install this add-on: https://addons.mozilla.org/en-US/firefox/addon/backforward-dropmarker/
Last but not least, some of your plugins are seriously out of date which exposes your system to exploits. Please visit the [http://www.mozilla.com/en-US/plugincheck/ Plugins Check] page and update where necessary.
See: http://www.adobe.com/support/security/bulletins/apsb11-08.html

The desktop on which I had Lightroom and PhotoshopCC installed failed and I no longer have access to it. How do I deactivate the software on those machines so that I can reinstall it on my new Mac?

Question: The desktop on which I had Lightroom and PhotoshopCC installed failed and I no longer have access to it. How do I deactivate the software on those machines so that I can reinstall it on my new Mac?

Absolutely - but I had no idea there were two versions. When I got my new laptop I just went to the Adobe site to download and install LR5. It never asked if I had a license; it just directed me to install CC to start a trial which I thought I could license after downloading. Several sessions and many hours of looking through the forums and Google for an answer I never ran across anything that made this distinction. I still haven't found a path from www.adobe.com that would get me to the standalone download page (it's probably there, wasn't obvious to me) and looking at the download page it doesn't make any CC/standalone distinction.
There are many places I could have gotten a hint - for instance the license could be tagged "stand alone edition", the CC-version could recognize the stand-alone key and either accept it or produce a more meaningful error message, or the download site or the CC app could ask if I had previously purchased a key, etc.
It was my error to assume this was a deactivation problem, but it looked the same as a previous deactivation problem with Photoshop.
In any event, thank you for your help.

The list of extensions for InDesign now have a yellow triangle warning symbol in front of a good many of the extensions and when moused over i get one of two messages: "Extensions may not function properly because it does not meet the dependency conditio

The list of extensions for InDesign now have a yellow triangle warning symbol in front of a good many of the extensions and when moused over i get one of two messages:
"Extensions may not function properly because it does not meet the dependency condition."
OR
Extension Status is not consistent with extension set configuration."
The reason I opened the Extension Manager in the first place was to check to see if I had installed a third party extension. And I was presented with these warning symbols. I haven't added anything, I haven't done anything that would cause this.
Does anyone know how to fix this???
I am running OSX 10.9.5; Indesign CS6 version 8.0.2 And Adobe Extension Manager version 6.0.8.28.
Thanks in advance!
Nina

Many InDesign pre-installed extensions (Those extensions you have immediately after InDesign installation) define dependency rules in their mxi files. Dependency means that one extension works well only if one or more other extensions are installed and enabled. If this condition is not met, the yellow triangle warning will be shown.
You can select an extension with warning, click "Advanced" tag page in the lower right panel. You will see "This extension has dependency on: <extension name> ...". Check whether every extensions listed here are available and enabled. If not, enable them. Repeat these steps for all the extensions which have warning.

SCOM reports "A significant portion of the database buffer cache has been written out to the system paging file. This may result in severe performance degradation"

This was discussed here, with no resolution
http://social.technet.microsoft.com/Forums/en-US/exchange2010/thread/bb073c59-b88f-471b-a209-d7b5d9e5aa28?prof=required
I have the same issue. This is a single-purpose physical mailbox server with 320 users and 72GB of RAM. That should be plenty. I've checked and there are no manual settings for the database cache. There are no other problems with
the server, nothing reported in the logs, except for the aforementioned error (see below).
The server is sluggish. A reboot will clear up the problem temporarily. The only processes using any significant amount of memory are store.exe (using 53GB), regsvc (using 5) and W3 and Monitoringhost.exe using 1 GB each. Does anyone have
any ideas on this?
Warning ESE Event ID 906.
Information Store (1497076) A significant portion of the database buffer cache has been written out to the system paging file. This may result in severe performance degradation. See help link for complete details of possible causes. Resident cache
has fallen by 213107 buffers (or 11%) in the last 207168 seconds. Current Total Percent Resident: 79% (1574197 of 1969409 buffers)

Brian,
We had this event log entry as well which SCOM picked up on, and 10 seconds before it the Forefront Protection 2010 for Exchange updated all of its engines.
We are running Exchange 2010 SP2 RU3 with no file system antivirus (the boxes are restricted and have UAC turned on as mitigations). We are running the servers primarily as Hub Transport servers with 16GB of RAM, but they do have the mailbox role installed
for the sole purpose of serving as our public folder servers.
So we theroized the STORE process was just grabbing a ton of RAM, and occasionally it was told to dump the memory so the other processes could grab some - thus generating the alert. Up until last night we thought nothing of it, but ~25 seconds after the
cache flush to paging file, we got the following alert:
Log Name:      Application
Source:        MSExchangeTransport
Date:          8/2/2012 2:08:14 AM
Event ID:      17012
Task Category: Storage
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      HTS1.company.com
Description:
Transport Mail Database: The database could not allocate memory. Please close some applications to make sure you have enough memory for Exchange Server. The exception is Microsoft.Exchange.Isam.IsamOutOfMemoryException: Out of Memory (-1011)
   at Microsoft.Exchange.Isam.JetInterop.CallW(Int32 errFn)
   at Microsoft.Exchange.Isam.JetInterop.MJetOpenDatabase(MJET_SESID sesid, String file, String connect, MJET_GRBIT grbit, MJET_WRN& wrn)
   at Microsoft.Exchange.Isam.JetInterop.MJetOpenDatabase(MJET_SESID sesid, String file, MJET_GRBIT grbit)
   at Microsoft.Exchange.Isam.JetInterop.MJetOpenDatabase(MJET_SESID sesid, String file)
   at Microsoft.Exchange.Isam.Interop.MJetOpenDatabase(MJET_SESID sesid, String file)
   at Microsoft.Exchange.Transport.Storage.DataConnection..ctor(MJET_INSTANCE instance, DataSource source).
Followed by:
Log Name:      Application
Source:        MSExchangeTransport
Date:          8/2/2012 2:08:15 AM
Event ID:      17106
Task Category: Storage
Level:         Information
Keywords:      Classic
User:          N/A
Computer:      HTS1.company.com
Description:
Transport Mail Database: MSExchangeTransport has detected a critical storage error, updated the registry key (SOFTWARE\Microsoft\ExchangeServer\v14\Transport\QueueDatabase) and as a result, will attempt self-healing after process restart.
Log Name:      Application
Source:        MSExchangeTransport
Date:          8/2/2012 2:13:50 AM
Event ID:      17102
Task Category: Storage
Level:         Warning
Keywords:      Classic
User:          N/A
Computer:      HTS1.company.com
Description:
Transport Mail Database: MSExchangeTransport has detected a critical storage error and has taken an automated recovery action. This recovery action will not be repeated until the target folders are renamed or deleted. Directory path:E:\EXCHSRVR\TransportRoles\Data\Queue
is moved to directory path:E:\EXCHSRVR\TransportRoles\Data\Queue\Queue.old.
So it seems as if the Forefront Protection 2010 for Exchange inadvertently trigger the cache flush which didn't appear to happen quick or thuroughly enough for the transport service to do what it needed to do, so it freaked out and performed the subsequent
actions.
Do you have any ideas on how to prevent this 906 warning, which cascaded into a transport service outage?
Thanks!

Error. This extension cannot be installed, since it conflicts with an existing one. To install this extension, please remove the extension 'GuideGuide' which has been installed in", then install again.

Similar Messages

Maybe you are looking for