ERROR: Timed out (100000): Interrupted Exception

Hello !
I got the error described as _(ERROR: Timed out (100000): Interrupted Exception)_ when starting all services on my virtual machine (RHEL 4). After checking from Metalink, I concluded that the problem is caused by the overload since I have less than 1.5GB of memory allocated to this virtual machine.
I did all the steps as demanded in Metalink, but still unable to find out what can be done in the step described as below:
Implement this new timeout value by modifying the AutoConfig template for opmn.xml
Filename "opmnctl_1013.tmp" located in $FND_TOP/admin/template
Thanks for your contribution.
Regards,
Edited by: user650358 on 15-Feb-2010 11:29

Hello,
I set the local_listener in the spfile and configured it. As suggested in the forums, I changed the SGA_TARGET and PGA_AGGREGATE parameters. In order to effect the changes, I then
recreated the context file because while going through it, I noticed that those default values were unchanged. I recreated the Context file (which is very short compared to the old one and can't run the AutoConfig anew).
I am going through the note 601470.1 and can't get a headway on this issue. This is the error issued while running the AutoConfig on the Database Tier.
Using VersionConflictListGenerator.java version 120.3
All driver files processed.
No version conflict encountered.
===========================================================================
ERROR: Context Value Management Failed.
Terminate.
Regards,

Similar Messages

  • Starting adformsctl.sh errors(ERROR : Timed out( 300000 ): Interrupted

    Executing service control script:
    /ebiz/appl12/inst/apps/CRP3C_belsundev/admin/scripts/adformsctl.sh start
    ^R
    script returned:
    ERROR : Timed out( 300000 ): Interrupted Exception
    You are running adformsctl.sh version 120.12.12000000.3
    Previously it was erroring with below message.I've increased forms timeout value in opmn.xml from 600 to 1800.
    ERROR : Timed out( 300000 ): Interrupted Exception
    Edited by: user7747348 on Dec 6, 2008 5:16 AM

    What is the application release? What is the OS?
    Was this working before? If yes, what changes have been done recently?
    Did you try to run AutoConfig and see if it completes successfully?
    Please review the following notes, and try the solutions suggested there.
    Note: 564536.1 - Release 12 : ADSTRTAL.sh returns error : TIMED OUT( 100000 ): INTERRUPTED EXCEPTION
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=564536.1
    Note: 566142.1 - R12: Stopping OPMN Managed J2EE Processes Results In Timeout
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=566142.1
    Note: 412980.1 - oafm,forms and oacore not starting up after IP adress change
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=412980.1

  • Error--Timed out trying to start process J000.

    Hi all,
    I have a Oracle 9.2 on sun box with 2 node rac. i am getting an erorr in alert log file i.e
    Timed out trying to start process J001.
    Tue Feb 17 13:27:30 2009
    Timed out trying to start process J000.
    Tue Feb 17 13:29:39 2009
    Timed out trying to start process J001.
    Tue Feb 17 13:41:23 2009
    Timed out trying to start process J001.
    Tue Feb 17 13:43:32 2009
    Timed out trying to start process J000.
    Tue Feb 17 13:49:42 2009
    Tue Feb 17 13:49:44 2009
    Trace dumping is performing id=[cdmp_20090217134944]
    Tue Feb 17 13:54:17 2009
    Timed out trying to start process J000.
    Tue Feb 17 13:56:20 2009
    Timed out trying to start process J000.
    Tue Feb 17 13:58:28 2009
    Timed out trying to start process J000.can anybbody suggest me for the same why i am getting this error and what should be the solution....

    JOB     WHAT                                                                                         FAILURES
    1     db_space_hist_proc;                                                                           0
    22     P_S_EC_GENERATION(sysdate);                                                           0
    4     CREATE INDEX DATA3.IDX_PED_PH_CODE
    ON CADATA3.OT_PENDENCY_DETL(PED_COMP_CODE, PED_PH_SYS_ID, PED_PD_CODE, PED_TXN_CODE)
                                                                                                              16
    5     CREATE INDEX DATA3.IDX_PED_PH_CODE
    ON DATA3.OT_PENDENCY_DETL(PED_COMP_CODE, PED_PH_SYS_ID, PED_PD_CODE, PED_TXN_CODE);
                                                                                                                           16
    99     insert_photo_link;                                                                             0could this be the problem here we can see that jo no. 4 and 5 have failed more than 16.......
    Edited by: user00726 on Feb 16, 2009 11:17 PM

  • Unable to download music as I get an error - Timed Out Try later

    Every time I log into Itunes and attempt to download a tune, I get a message saying 'Timed - Out' try later.

    Welcome to the Apple Community.
    I have seen previous versions mentioned in a pop up message before on iCloud.com, but I'm not really sure at all how it would help, as I couldn't get it to do anything.
    The best advice I have at this time is to back up your work on your iOS device by regularly saving it to iTunes, if anything goes wrong you can then either load it into the numbers app again on the device or recover it via iTunes on your computer.
    My syncs are immediate, I never get chance to see if it works in the background, sorry.

  • I have been unable to update my Iphone 4S software to V5.1 - same message - operation timed out - connection interruption.  From various PC's and Laptops!

    I have been struggeling for days to update my Iphone software to V5.1.  On my desktop PC with uninterrupted ADSL I received a message "error in connection" and operation tmed out"  I have used my laptop (with no previous Itunes programs) installed Itunes and connected my Iphone 4S.  I constantly receive the same message?

    if you have ios 5.0 on your device you can update it directly from the iphone.
    go to settings / softwareupdate.
    do a backup on your iphone first.

  • Error timed out: (-1001) during Software Update

    Hello All, I am a relatively new mac user, and I am trying to sort out the one major issue I've been having. I received this computer from a publishing company that was decommissioning them, and I do not know much about it. What I do know is that is sat for a long time, unused and not updated. Here are the specs off hand:
    PowerBook G4
    1 gig of RAM (extra stick of 512 added somewhere along the line)
    40GB HDD, roughly 17GB free
    Running 10.4.9
    My problem is as follows:
    When I go to "Software Update" under the Apple icon, it starts to look for updates, but always times out and gives the the error (-1001). It tells me that there is a network problem and that I have no connectivity. I use the Network Diag tool, but it tells me everything is in order. I know everything is in order because I can access the internet, as I am typing this from the machine in question. I manually updated the OS all the way from 10.4.3, in hopes that it would resolve my updating problem, but it has not.
    Any input or resolutions would be greatly appreciated, and thanks for your time.
    PowerBook G4 Mac OS X (10.4.9)

    Hi kalvinr11, Welcome to Apple's Users Help Users Forums.
    While error -1001 is often 'server down' I just checked SU and it went thru for me. You might try again w fingers crossed.
    How are you connected to the internet, adsl or dial up? Who is your ISP? That info may be helpful when someone more vast, see below, chimes in.

  • Microsoft Exchange Writer State: [9] Failed Last error: Timed out

    Hi,
    We're running Exchange 2010 SP3 UR4
    We're backing up using DELL Compellent Replay Manager.  Works half the time.  Geting "time out" errors on Microsoft Exchange Writer during the rest.
    Event log shows event id 2003 and 2007 for ShadowCopy near the 45 seconds to 1 minute mark.  It really looks like it's too busy to finish the job.
    Error is recoverable.  No action is taken and next snapshot can succeed.
    I watched the server during a snapshot to see if resources are an issue but there was no spike in resources that was obvious to me.
    Dell says its a Microsoft VSS issue but our VSS backups using Netbackup have no problem.  They don't overlap, by the way.
    Can Microsoft VSS be tweaked if I'm getting a timeout error on Microsoft Exchange Writer?
    thanks,
    rudif

    Hello,
    Please post the detailed error information and check if there is any other related warning or error.
    According to your description, the issue seems to be backup software. But I still recommend you run the command "VSSadmin list writers" to check Exchange writer state. If the Exchange writer is not in stable state(such as "Retryable error" state), please
    try to restart information store service to check the result again.
    Please try to refer to the following blog to troubleshoot VSS Backups issue. (Please Note:Based on my known, it also applies to exchange 2010.)
    http://blogs.technet.com/b/exchange/archive/2008/08/25/3406172.aspx
    Cara Chen
    TechNet Community Support

  • I'm trying to update my iPhone with the new update. Using Macbook Pro, Lion software. It keeps saying "connection error timed out". What's my problem?

    Trying to get the update. Appreciate assistance!

    Disable any antivirus and firewall software installed on your computer. They can interfere with the update process.

  • Phone wont restore. keep getting error timed out mesg. any suggestion?

    ive deleted itunes and restared pc and reinstalled fresh itunes. keep getting eror 3259. any help is appreciated. thanks

    Try this:
    https://discussions.apple.com/thread/3216143?start=0&tstart=0

  • Timed out but services started

    Dear all,
    When am starting the services as below adoacorectl.sh start
    script returned failure.. but when I check the services it is up and running as you can see .. any iea
    Executing service control script:
    /u01/prod/inst/apps/prod/admin/scripts/adoacorectl.sh start
    script returned:
    ERROR : Timed out( 100000 ): Interrupted Exception
    You are running adoacorectl.sh version 120.13
    Starting OPMN managed OACORE OC4J instance ...
    bash-3.00$ sh adoacorectl.sh status apps
    You are running adoacorectl.sh version 120.13
    Checking status of OPMN managed OACORE OC4J instance ...
    Processes in Instance:
    --------------------------------------------------------------+---------
    ias-component | process-type | pid | status
    --------------------------------------------------------------+---------
    OC4JGroup:default_group | OC4J:oafm | 25762 | Alive
    OC4JGroup:default_group | OC4J:forms | 25731 | Alive
    OC4JGroup:default_group | OC4J:oacore | 25702 | Alive
    OC4JGroup:default_group | OC4J:oacore | 25701 | Alive
    HTTP_Server | HTTP_Server | 25647 | Alive
    adoacorectl.sh: exiting with status 0
    adoacorectl.sh: check the logfile /u01/prod/inst/apps/prod/logs/appl/admin/log/adoacorectl.txt for more information ...
    Edited by: 902105 on Dec 16, 2011 1:00 PM

    Please post the details of the application release, database version and OS.
    Please see these docs
    Release 12 : ADSTRTAL.sh returns error : TIMED OUT( 100000 ): INTERRUPTED EXCEPTION [ID 564536.1]
    Starting up AS10g services in an EBusiness Suite Release 12 environment [ID 743518.1]
    Using Latest Java 6.0 Update With Oracle E-Business Suite Release 12 [ID 455492.1]
    R12: Stopping OPMN Managed J2EE Processes Results In Timeout [ID 566142.1]
    Unable to start the Middle-Tier Services after stopping the Instance for Backup [ID 1084306.1]
    Timed Out Error When Running Adstpall.Sh [ID 1316649.1]
    Thanks,
    Hussein

  • TxSetConfig.pl Timed out

    Hi,
    I am working on AIX 6.1 and recently I did a clone an R12 Instance, the database cloning went fine but after doing the application some of the services are unable to start as shown below
    Executing service control script:
    +/ora/oracle/PROD/inst/apps/PREPROD_tester/admin/scripts/adoafmctl.sh start+
    script returned:
    ERROR : Timed out( 100000 ): Interrupted Exception
    You are running adoafmctl.sh version 120.6.12000000.3
    Starting OPMN managed OAFM OC4J instance  ...
    Also whenever I try to execute the autoconfig the following script txSetConfig.pl give a time out error and the autoconfig fails;
    SCRIPT RETURNED:
    Timed out( 300000 ): Interrupted Exception
    TXK Script Name: txkSetConfig.pl
    Please advise.

    Please see these docs.
    Release 12 : ADSTRTAL.sh returns error : TIMED OUT( 100000 ): INTERRUPTED EXCEPTION [ID 564536.1]
    Starting up AS10g services in an EBusiness Suite Release 12 environment [ID 743518.1]
    Oacore Service Hanging at Startup [ID 1298003.1]
    Unable to start the Middle-Tier Services after stopping the Instance for Backup [ID 1084306.1]
    R12: Stopping OPMN Managed J2EE Processes Results In Timeout [ID 566142.1]
    Thanks,
    Hussein

  • While reading mail using imap timed out exception thrown

    Properties props =new Properties();
    // Properties props = System.getProperties();
    props.setProperty("mail.imaps.socketFactory.class","javax.net.ssl.SSLSocketFactory");
    props.setProperty("mail.imaps.socketFactory.fallback", "false");
    props.setProperty("mail.imaps.port", "143");
    props.setProperty("mail.imaps.socketFactory.port", "143");
    props.setProperty("mail.imaps.ssl.enable","true");
    props.setProperty("mail.imaps.connectiontimeout", "300000");
    props.setProperty("mail.imaps.timeout", "900000");
    props.setProperty("mail.imaps.connectiontimeout", "300000");
    props.setProperty("mail.imaps.statuscachetimeout", "3000000");
    props.setProperty("mail.imaps.connectionpooltimeout", "3000000");
    Session session = Session.getDefaultInstance(props, null);
    session.setDebug(true);
    store = session.getStore("imaps");
    session.setDebug(true);
    store.connect(popServer, popUser, popPassword);
    // -- Try to get hold of the default folder --
    folder = store.getDefaultFolder();
    if (folder == null) throw new Exception("No default folder");
    // -- ...and its INBOX --
    folder = folder.getFolder("INBOX");
    if (folder == null) throw new Exception(" sdfdfsd");
    // -- Open the folder for read only --
    folder.open(Folder.READ_ONLY);
    // -- Get the message wrappers and process them --
    Message[] msgs = folder.getMessages();
    System.out.println("ava au.com.covermore.EmailReader"
    +" msgs " + msgs.length);
    for (int msgNum = 0; msgNum < msgs.length; msgNum++)
    printMessage(msgs[msgNum]);
    //processMessage(msgs[msgNum]);
    nested exception is:
         java.net.ConnectException: Connection timed out: connect
         at com.sun.mail.imap.IMAPStore.protocolConnect(IMAPStore.java:665)
         at javax.mail.Service.connect(Service.java:295)
         at javax.mail.Service.connect(Service.java:176)
         at MyMail.read111(MyMail.java:139)
         at MyMail.main(MyMail.java:50)
    Caused by: java.net.ConnectException: Connection timed out: connect
         at java.net.PlainSocketImpl.socketConnect(Native Method)
         at java.net.PlainSocketImpl.doConnect(Unknown Source)
         at java.net.PlainSocketImpl.connectToAddress(Unknown Source)
         at java.net.PlainSocketImpl.connect(Unknown Source)
         at java.net.SocksSocketImpl.connect(Unknown Source)
         at java.net.Socket.connect(Unknown Source)
         at com.sun.net.ssl.internal.ssl.SSLSocketImpl.connect(Unknown Source)
         at com.sun.net.ssl.internal.ssl.BaseSSLSocketImpl.connect(Unknown Source)
         at com.sun.mail.util.SocketFetcher.createSocket(SocketFetcher.java:288)
         at com.sun.mail.util.SocketFetcher.getSocket(SocketFetcher.java:205)
         at com.sun.mail.iap.Protocol.<init>(Protocol.java:113)
         at com.sun.mail.imap.protocol.IMAPProtocol.<init>(IMAPProtocol.java:110)
         at com.sun.mail.imap.IMAPStore.protocolConnect(IMAPStore.java:632)
         ... 4 more
    Edited by: 831679 on Jan 27, 2011 2:35 AM

    hi
    i check all those.But my error still exists
    I changed my code as follows
    String host="dsds-excas.bs-ssssmanagement.com";
                   String username="[email protected]";
                   String password="sadsdsd";
                   Properties props=new Properties();                         
                   props.put("mail.imaps.timeout", "120000");               
                   Session session = Session.getInstance(props);
         session.setDebug(true);     
         Store store = session.getStore("imaps");
         store.connect(host, username, password);
         System.out.println("Connected...");
         Folder inbox = store.getDefaultFolder().getFolder("INBOX");
         inbox.open(Folder.READ_ONLY);
         Message[] msg = inbox.getMessages();
         System.out.println(msg);
    =============================================================
    DEBUG: setDebug: JavaMail version 1.4.4
    DEBUG: getProvider() returning javax.mail.Provider[STORE,imaps,com.sun.mail.imap.IMAPSSLStore,Sun Microsystems, Inc]
    DEBUG: mail.imap.fetchsize: 16384
    DEBUG: mail.imap.statuscachetimeout: 1000
    DEBUG: mail.imap.appendbuffersize: -1
    DEBUG: mail.imap.minidletime: 10
    DEBUG: trying to connect to host "dddddddddd.bs-sssssmanagement.com", port 993, isSSL true
    javax.mail.MessagingException: Connection timed out: connect;
    nested exception is:
         java.net.ConnectException: Connection timed out: connect
         at com.sun.mail.imap.IMAPStore.protocolConnect(IMAPStore.java:665)
         at javax.mail.Service.connect(Service.java:295)
         at javax.mail.Service.connect(Service.java:176)
         at BsmMail.main(BsmMail.java:34)
    Caused by: java.net.ConnectException: Connection timed out: connect
         at java.net.PlainSocketImpl.socketConnect(Native Method)
         at java.net.PlainSocketImpl.doConnect(Unknown Source)
         at java.net.PlainSocketImpl.connectToAddress(Unknown Source)
         at java.net.PlainSocketImpl.connect(Unknown Source)
         at java.net.SocksSocketImpl.connect(Unknown Source)
         at java.net.Socket.connect(Unknown Source)
         at com.sun.net.ssl.internal.ssl.SSLSocketImpl.connect(Unknown Source)
         at com.sun.net.ssl.internal.ssl.BaseSSLSocketImpl.connect(Unknown Source)
         at com.sun.mail.util.SocketFetcher.createSocket(SocketFetcher.java:288)
         at com.sun.mail.util.SocketFetcher.getSocket(SocketFetcher.java:231)
         at com.sun.mail.iap.Protocol.<init>(Protocol.java:113)
         at com.sun.mail.imap.protocol.IMAPProtocol.<init>(IMAPProtocol.java:110)
         at com.sun.mail.imap.IMAPStore.protocolConnect(IMAPStore.java:632)
         ... 3 more
    ================================================
    Please help
    Edited by: 831679 on Jan 28, 2011 2:29 AM
    Edited by: 831679 on Jan 28, 2011 2:40 AM

  • Whenever i try to update my ipod touch to ios5 it finishes its deal and then it says error and that it timed out and to check my connection

    whenever i try to update my ipod touch to iOS 5 it downloads and then it say error timed out and to check my connection it is making me really mad and i'm tempted to take it back

    i made sure my itunes was up to date

  • Runtime error : Time out

    Hi experts...
    I am trying to execute one program in production.. its giving me runtime error timed out....
    I am giving you line on which it is showing runtime error...
    Please check it n suggest me how can we optimize this code to avoid the same error...
    SELECT afko~aufnr afko~aufpl afko~rueck afpo~matnr
      INTO   CORRESPONDING FIELDS OF TABLE it_temp_orders
      FROM   afko
      INNER  JOIN afpo ON
             afpo~aufnr = afko~aufnr
      WHERE  afko~aufnr  IN  s_aufnr
      AND    afko~dispo  IN  s_dispo
      AND    afpo~matnr  IN  s_matnr
      AND    afpo~dwerk  IN  s_werks
      AND    afpo~dauat  IN  s_auart.
      SORT it_temp_orders BY aufnr aufpl matnr rueck.
    Regards

    Hi,
    break this into two select queries......
    use the below code to do the same....
    data : begin of fs_afko
                  aufnr type afko-aufnr,
                  aufpl type afko-aufpl,
                  reuck type afko-reuck,
            end of fs_afko.
    data : Begin of fs_afpo,
                aufnr type afpo-aufnr,
               matnr type afpo-matnr,
            End of fs_afpo.
    data : t_afko type table of fs_afko,
             t_afpo type table of fs_afpo.
    SELECT aufnr aufpl rueck
      INTO   TABLE t_afko
      FROM   afko
      WHERE  afko~aufnr  IN  s_aufnr
      AND    afko~dispo  IN  s_dispo.
    SELECT afpo~matnr
      INTO   TABLE t_afpo
      FROM   afpo
      FOR ALL ENTRIES IN t_afko
      WHERE  aufnr  =  t_afko-aufnr
      AND    afpo~matnr  IN  s_matnr
      AND    afpo~dwerk  IN  s_werks
      AND    afpo~dauat  IN  s_auart.
    loop at t_afko into fs_afko.
      loop at t_afpo into fs_afpo where aufnr = fs_afko-aufnr.
        move-corresponding fs_afko to fs_temp_orders.
        move-corresponding fs_afpo to fs_temp_orders.
        append fs_temp_orders to it_temp_orders
      endloop.
    endloop.
    Regards,
    Siddarth

  • Timed out waiting for ccmexec service to be fully operational

    We are deploying Windows 7 in an SCCM 2007 R3 SP2 environment.  Some of the clients we target fail the task sequence with the error, "Timed out waiting for ccmexec service to be fully operational".  Below is the relevant part of the SMSTS.LOG
    file:
    Succeeded loading resource DLL 'C:\Windows\system32\CCM\1033\TSRES.DLL' 
    Failed to create an instance of COM progress UI object. Error code 0x80040154 
    Timed out waiting for ccmexec service to be fully operational 
    0, HRESULT=80004005 (e:\nts_sms_fre\sms\framework\tscore\utils.cpp,4192) 
    Failed to wait for Ccmexec service to be fully operational (0x80004005) 
    I have seen several posts with this error that say to create the "ConfigMgr Remote Control Users" group. 
    Here is an example.  We have created this group locally AND on the domain, but we still see this failure on about 10% of clients that we target.  Any other ideas what might be creating this issue?
    Thanks,
    FP

    After a restart in the task sequence (not the same restart every time) the ccmexec process doesn´t seem to want to start again. The problem is intermittent and does not occure on every installation, though quite frequently. 
    In the smsts.log you get "waiting for the ccmexec process to start" and "Waiting for CcmExec service to be fully operational", eventually it times out and the installation fails. If we start a command prompt and start the service manually
    the installation continues though. 
    The strange thing is, this only seems to happen on a specific computer model. We have tried updating BIOS and drivers to the latest version, but no success.
    Last lines of smsts.log
    Failed to find property 'AutoApplyDeployment' in 'CCM_ApplicationManagementClientConfig' class defintion. Error 0x80041002. Default value will be used for this property
    TSManager 2014-09-15 09:53:19
    2244 (0x08C4)
    Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace
    TSManager 2014-09-15 09:53:19
    2244 (0x08C4)
    End TS policy compilation TSManager
    2014-09-15 09:53:19 2244 (0x08C4)
    Get Install Directory for SMS Client TSManager
    2014-09-15 09:53:19 2244 (0x08C4)
    Updating settings in \\.\root\ccm\policy\machine\actualconfig
    TSManager 2014-09-15 09:53:19
    2244 (0x08C4)
    RequestedConfig policy instance(s) : 437 TSManager
    2014-09-15 09:53:19 2244 (0x08C4)
    Locked \\.\ROOT\ccm\policy\machine\RequestedConfig for source SMS:Client:Default:{8864FB91-94EE-4F16-A144-0D82A232049D} successfully
    TSManager 2014-09-15 09:53:19
    2244 (0x08C4)
    Namespace: \\.\ROOT\ccm\policy\machine\RequestedConfig, Query: SELECT PolicyID FROM CCM_Policy_Policy5 WHERE (PolicySource = "SMS:Client:Default:{8864FB91-94EE-4F16-A144-0D82A232049D}") AND (PolicyState = "Active") AND (PolicyType = "Machine")
    TSManager 2014-09-15 09:53:19
    2244 (0x08C4)
    There is no ccm_policy_policy instance, skipping addition to realinst map
    TSManager 2014-09-15 09:53:19
    2244 (0x08C4)
    Unlocked \\.\ROOT\ccm\policy\machine\RequestedConfig for source SMS:Client:Default:{8864FB91-94EE-4F16-A144-0D82A232049D} successfully
    TSManager 2014-09-15 09:53:19
    2244 (0x08C4)
    RequestedConfig policy instance(s) : 0 TSManager
    2014-09-15 09:53:19 2244 (0x08C4)
    Locked \\.\ROOT\ccm\policy\machine\RequestedConfig for source SMS:GAV successfully
    TSManager 2014-09-15 09:53:19
    2244 (0x08C4)
    Namespace: \\.\ROOT\ccm\policy\machine\RequestedConfig, Query: SELECT PolicyID FROM CCM_Policy_Policy5 WHERE (PolicySource = "SMS:GAV") AND (PolicyState = "Active") AND (PolicyType = "Machine")
    TSManager 2014-09-15 09:53:19
    2244 (0x08C4)
    There is no ccm_policy_policy instance, skipping addition to realinst map
    TSManager 2014-09-15 09:53:19
    2244 (0x08C4)
    Unlocked \\.\ROOT\ccm\policy\machine\RequestedConfig for source SMS:GAV successfully
    TSManager 2014-09-15 09:53:19
    2244 (0x08C4)
    RequestedConfig policy instance(s) : 0 TSManager
    2014-09-15 09:53:19 2244 (0x08C4)
    Locked \\.\ROOT\ccm\policy\machine\RequestedConfig for source CcmPortal successfully
    TSManager 2014-09-15 09:53:19
    2244 (0x08C4)
    Namespace: \\.\ROOT\ccm\policy\machine\RequestedConfig, Query: SELECT PolicyID FROM CCM_Policy_Policy5 WHERE (PolicySource = "CcmPortal") AND (PolicyState = "Active") AND (PolicyType = "Machine")
    TSManager 2014-09-15 09:53:19
    2244 (0x08C4)
    There is no ccm_policy_policy instance, skipping addition to realinst map
    TSManager 2014-09-15 09:53:19
    2244 (0x08C4)
    Unlocked \\.\ROOT\ccm\policy\machine\RequestedConfig for source CcmPortal successfully
    TSManager 2014-09-15 09:53:19
    2244 (0x08C4)
    RequestedConfig policy instance(s) : 0 TSManager
    2014-09-15 09:53:19 2244 (0x08C4)
    Locked \\.\ROOT\ccm\policy\machine\RequestedConfig for source Local successfully
    TSManager 2014-09-15 09:53:19
    2244 (0x08C4)
    RequestedConfig policy instance(s) : 9 TSManager
    2014-09-15 09:53:19 2244 (0x08C4)
    Unlocked \\.\ROOT\ccm\policy\machine\RequestedConfig for source Local successfully
    TSManager 2014-09-15 09:53:19
    2244 (0x08C4)
    RequestedConfig policy instance(s) : 34 TSManager
    2014-09-15 09:53:19 2244 (0x08C4)
    Locked \\.\ROOT\ccm\policy\machine\RequestedConfig for source CcmTaskSequence successfully
    TSManager 2014-09-15 09:53:19
    2244 (0x08C4)
    Namespace: \\.\ROOT\ccm\policy\machine\RequestedConfig, Query: SELECT PolicyID FROM CCM_Policy_Policy5 WHERE (PolicySource = "CcmTaskSequence") AND (PolicyState = "Active") AND (PolicyType = "Machine")
    TSManager 2014-09-15 09:53:19
    2244 (0x08C4)
    There is no ccm_policy_policy instance, skipping addition to realinst map
    TSManager 2014-09-15 09:53:19
    2244 (0x08C4)
    Unlocked \\.\ROOT\ccm\policy\machine\RequestedConfig for source CcmTaskSequence successfully
    TSManager 2014-09-15 09:53:19
    2244 (0x08C4)
    Total RequestedConfig policy instance(s) : 480
    TSManager 2014-09-15 09:53:19
    2244 (0x08C4)
    New/Changed ActualConfig policy instance(s) : 0
    TSManager 2014-09-15 09:53:19
    2244 (0x08C4)
    Policy evaluation initiated TSManager
    2014-09-15 09:53:19 2244 (0x08C4)
    Waiting for policy to be compiled in 'root\ccm\policy\machine' namespace
    TSManager 2014-09-15 09:53:19
    2244 (0x08C4)
    Query = 'CCM_SystemHealthClientConfig.SiteSettingsKey="1"'
    TSManager 2014-09-15 09:53:19
    2244 (0x08C4)
    Verified policy for instance path 'CCM_SystemHealthClientConfig.SiteSettingsKey="1"' compiled in 'root\ccm\policy\machine' namespace
    TSManager 2014-09-15 09:53:19
    2244 (0x08C4)
    Query = 'CCM_SoftwareUpdatesClientConfig.SiteSettingsKey="1"'
    TSManager 2014-09-15 09:53:19
    2244 (0x08C4)
    Verified policy for instance path 'CCM_SoftwareUpdatesClientConfig.SiteSettingsKey="1"' compiled in 'root\ccm\policy\machine' namespace
    TSManager 2014-09-15 09:53:19
    2244 (0x08C4)
    Query = 'CCM_SoftwareDistributionClientConfig.SiteSettingsKey="1"'
    TSManager 2014-09-15 09:53:19
    2244 (0x08C4)
    Verified policy for instance path 'CCM_SoftwareDistributionClientConfig.SiteSettingsKey="1"' compiled in 'root\ccm\policy\machine' namespace
    TSManager 2014-09-15 09:53:19
    2244 (0x08C4)
    Query = 'CCM_NetworkAccessAccount.SiteSettingsKey="1"'
    TSManager 2014-09-15 09:53:19
    2244 (0x08C4)
    Verified policy for instance path 'CCM_NetworkAccessAccount.SiteSettingsKey="1"' compiled in 'root\ccm\policy\machine' namespace
    TSManager 2014-09-15 09:53:19
    2244 (0x08C4)
    Query = 'CCM_RebootSettings.SiteSettingsKey="1"'
    TSManager 2014-09-15 09:53:19
    2244 (0x08C4)
    Verified policy for instance path 'CCM_RebootSettings.SiteSettingsKey="1"' compiled in 'root\ccm\policy\machine' namespace
    TSManager 2014-09-15 09:53:19
    2244 (0x08C4)
    Query = 'CCM_ApplicationManagementClientConfig.SiteSettingsKey="1"'
    TSManager 2014-09-15 09:53:19
    2244 (0x08C4)
    Verified policy for instance path 'CCM_ApplicationManagementClientConfig.SiteSettingsKey="1"' compiled in 'root\ccm\policy\machine' namespace
    TSManager 2014-09-15 09:53:19
    2244 (0x08C4)
    Policy verification done TSManager
    2014-09-15 09:53:19 2244 (0x08C4)
    Config policies compiled successfully TSManager
    2014-09-15 09:53:19 2244 (0x08C4)
    _SMSTSReturnToGINA variable set to true TSManager
    2014-09-15 09:53:19 2244 (0x08C4)
    Waiting for CcmExec service to be fully operational
    TSManager 2014-09-15 09:53:19
    2244 (0x08C4)
    Succeeded loading resource DLL 'C:\Windows\CCM\1033\TSRES.DLL'
    TSManager 2014-09-15 09:53:20
    2244 (0x08C4)
    Launching command shell. OSDSetupHook
    2014-09-15 09:54:28 2212 (0x08A4)
    Windows station: WinSta0 OSDSetupHook
    2014-09-15 09:54:28 2212 (0x08A4)
    Desk"Apple-tab-span" style="white-space:pre;"> OSDSetupHook
    2014-09-15 09:54:28 2212 (0x08A4)
    executing command: C:\Windows\system32\cmd.exe /k
    OSDSetupHook 2014-09-15 09:54:28
    2212 (0x08A4)
    executed command: C:\Windows\system32\cmd.exe /k
    OSDSetupHook 2014-09-15 09:54:28
    2212 (0x08A4)
    Also some errors in the ccmexec.log, if they have anything to do with it:
    Messaging::Initialize(), HRESULT=80080005 (e:\nts_sccm_release\sms\framework\messaging\ccmexec\init.cpp,951)
    CcmExec 2014-09-15 09:54:04
    2380 (0x094C)
    Error initializing messaging subsystem (0x80080005).
    CcmExec 2014-09-15 09:54:04
    2380 (0x094C)
    Released system busy flag after ccmexec initialization.
    CcmExec 2014-09-15 09:54:04
    2380 (0x094C)
    Phase 1 initialization failed (0x80080005).
    CcmExec 2014-09-15 09:54:04
    2380 (0x094C)
    *** System is now free to go to sleep CcmExec
    2014-09-15 09:54:04 2376 (0x0948)
    Init_Phase1(), HRESULT=80080005 (e:\nts_sccm_release\sms\framework\messaging\ccmexec\entrypoint.cpp,2528)
    CcmExec 2014-09-15 09:54:04
    2380 (0x094C)
    Phase 1 initialization failed (0x80080005).
    CcmExec 2014-09-15 09:54:04
    2380 (0x094C)
    pTask->Execute(pService, pState, ulFlags), HRESULT=80080005 (e:\nts_sccm_release\sms\framework\ccmtask\taskexec.cpp,108)
    CcmExec 2014-09-15 09:54:04
    2380 (0x094C)
    ExecuteTask() failed with HR = 0x80080005 CcmExec
    2014-09-15 09:54:04 2380 (0x094C)
    SERVICE_CONTROL_POWEREVENT(Event=PBT_POWERSETTINGCHANGE)
    CCMEXEC 2014-09-15 09:55:48
    1900 (0x076C)
    SystemTaskProcessor::QueueEvent(PowerChanged, 0)
    CCMEXEC 2014-09-15 09:55:48
    1900 (0x076C)
    SystemTaskProcessor::QueueEvent(PowerChangedEx, 0)
    CCMEXEC 2014-09-15 09:55:48
    1900 (0x076C)
    //Fredrik

Maybe you are looking for