Error to delete the cube

Hi All,
Iam in ASo using 11.1.1.2v I am not able to delete the cube its saying eror 1054002 :loading application is not permitted i deleted in app folder but in EAS its not delting i tried with maxl also but its not delting this is happne bcoz of
i changed admin password and i re created partition then its not showing anything again reset the password to"passord" then i am not able to see the data in the cube so i want to delete that cube but its giving error

I hope, u have deleted the application from back end.... and not able to delete the same from Console.. Is it ?
I think, u need to refresh the Appliation list or disconnect the Ananltycal server and then connect it again, hope it will disapperar.;;;;;;
Regards
Cnee

Similar Messages

Error While deleting the Profit Center

Hi I am getting the below error while deleting the Profit center. Please help me how to fix this issue...
Profit center Scenario was activated in New GL Accounting
what configurations do i need to change to fix this error? Kindly advise me..
Thanks
Kishore

Dear,
while deleting the profit center we have to requrie follow the steps
1) OBR1 - Reset Transaction data
2)OBR2 - Reset the master data
3)OKKS - Set Controlling Area
4)OKC3 - Delete Transcation Data
5) KL14 - Delete Activity Types
6)OKE5 - Profit center De - Active
7)OKE1 - Profit center Transcation data delete
8)OKE2 - profit center delete
if if you follow above steps easily we can make the delete the profitcenter and we donot have to activate profitcenter
i hope solve you r problem
With regards /G chandu

Error while deleting the agreement

Hi,
I am facing the following error while deleting the agreement.
There was an error deleting agreement.
Error -: AIP-16015: Delete of Internal Delivery Channel Usage failed with error: Cannot delete Internal Delivery Channel Usage which is referenced by Participant Delivery Channel
Error -: AIP-16011: Cannot delete Internal Delivery Channel Usage which is referenced by Participant Delivery Channel
We are getting the same error while deleting the individual TP participants from the agreement.
I don't have any agreements deployed on the B2B.
Can you please let me know the reason for this error?
Regard,
Ravi Shah

Please refer B2B Error:- AIP-16015 and AIP-16016 when deleting a TP Agreement

Error while deleting the Master data

Hi Friends,
i am getting the below error while deleting the data from a master data:-
The system is unable to delete all of the specified master data,because some of it is still in use. (See log:Object RSDMD, sub-object MD_DEL )
Do you want to delete the data records that are no longer in use?
Could you guide how should i proceed to delete the data.
Regards,
Hirdesh

Hi Hirdesh,
If you are using master data in someother data targets u cant delete master data.So first you have to delete the data in data targets where this particual master data object is used, then remove the data in master data object.
Regards
Prasad

"Error: An error occured deleting the import map"

Hello,
When trying to delete imported data, I get the following message :
Error: An error occured deleting the import map
Detail: Data access error
And the imported data aren't deleted.
The loaded file has around 350000 rows for 12 dimensions.
I never succeeded to load it in one time, only in 3 times with 3 files. It was a first issue.
And I want now to delete the import to do it again and I can't, due to the error.
Thanks
Patrick
PS : FDM version 11.1.1.3.01
Log :
** Begin FDM Runtime Error Log Entry [2013-04-03-08:49:22] **
ERROR:
Code............................................. -2147217900
Description...................................... ORA-30036: unable to extend segment by 8 in undo tablespace 'UNDOTBS1'
DELETE FROM tDataSeg3 WHERE ((PartitionKey) = 749) AND (TO_CHAR(PeriodKey,N'YYYYMMDD') Between N'20111231' And N'20111231') AND ((CatKey) = 12)
Procedure........................................ clsDataManipulation.fExecuteDML
Component........................................ upsWDataWindowDM
Version.......................................... 1111
Thread........................................... 4956
IDENTIFICATION:
User............................................. ollivierp
Computer Name.................................... EPM05
App Name......................................... FDM_MCHII
Client App....................................... WebClient
CONNECTION:
Provider......................................... ORAOLEDB.ORACLE
Data Server......................................
Database Name.................................... poh1
Trusted Connect.................................. False
Connect Status.. Connection Open
GLOBALS:
Location......................................... HPMCHII
Location ID...................................... 749
Location Seg..................................... 3
Category......................................... COMPTE
Category ID...................................... 12
Period........................................... Dec - 2011
Period ID........................................ 31/12/2011
POV Local........................................ False
Language......................................... 1033
User Level....................................... 1
All Partitions................................... False
Is Auditor....................................... False
** Begin FDM Runtime Error Log Entry [2013-04-03-08:49:22] **
ERROR:
Code............................................. -2147217900
Description...................................... Data access error.
Procedure........................................ clsImpProcessMgr.fClearData
Component........................................ upsWObjectsDM
Version.......................................... 1111
Thread........................................... 4956
IDENTIFICATION:
User............................................. ollivierp
Computer Name.................................... EPM05
App Name......................................... FDM_MCHII
Client App....................................... WebClient
CONNECTION:
Provider......................................... ORAOLEDB.ORACLE
Data Server......................................
Database Name.................................... poh1
Trusted Connect.................................. False
Connect Status.. Connection Open
GLOBALS:
Location......................................... HPMCHII
Location ID...................................... 749
Location Seg..................................... 3
Category......................................... COMPTE
Category ID...................................... 12
Period........................................... Dec - 2011
Period ID........................................ 31/12/2011
POV Local........................................ False
Language......................................... 1033
User Level....................................... 1
All Partitions................................... False
Is Auditor....................................... False
Edited by: user1104274 on 3 avr. 2013 00:10

The quota on the tablespace 'UNDOTBS1' needs to be extended to allow for the tablespace to grow. Right now it has met it's maximum quota.

Attribute change run fails - "Error when deleting the data record /B05/X.."

Hello,
I get the error message "Error when deleting the data record /B05/X.." on doing the change run.
I have already done RSRV on this objects and found no errors, but still the activation fails.
please give your suggestions ASAP to fix the issue as it is on production system.
Thanks.

Attribute change run could fails due to 2 reasons-
(1) attribute xchange run is already runnnig for any toher object(monitor lock) (check by thi prog-RSDDS_CHANGERUN_MONITOR)
(2) data is loading deleting from the object on which attribut changerun is running.(go in a manage tab and check)
check this two conditions and rerun the attribute changrun again from program - RSDDS_AGGREGATES_MAINTAIN and give the master data name in the selection.
Hope it helps you.

HT5731 After following the instructions to clear a -50 error and deleted the .tmp file, I am now getting a -150 error. What next?

After folling the instructions to clear a -50 error and deleted the .tmp file, I now am getting a -120 error. I can't find instructions to clear this...What next?

Hello jimlcoff,
I found a couple of articles with steps you can take when you are not able to connect to the iTunes Store. I recommend reviewing the following articles:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Thank you for using Apple Support Communities.
Best,
Sheila M.

Error while transporting the cube

Hi all,
While I was transporting my cube from Development box to Acceptance box, following error occured.
   Execution of programs after import (XPRA)
   Transport request   : GCDK905220
   System              : NCA
   tp path             : /usr/sap/NCA/DVEBMGS01/exe/tp
   Version and release: 372.04.10 700
   Post-import methods for change/transport request: GCDK905220
      on the application server: bdhp4684
   Post-import method RS_AFTER_IMPORT started for CUBE L, date and time: 20080802045222
   Program terminated (job: RDDEXECL, no.: 04522200)
      See job log
   Execution of programs after import (XPRA)
   End date and time : 20080802045237
   Ended with return code: ===> 12 <===
Actually transport failed but the cube was present in the Acceptance box in inactive state
Please help me for the same.
With thanks and regards
Mukul Singhal

Hi Mukul,
This is an RC=12 issue.Contact the basis team or raise ticket basis team stating that your specified transport request is got terminated.Basis team will resolve the issue and then you can Import the transport into your acceptance system.
I hope it will help you.
Regards
Suresh B.G.

Error while deleting the confirmation- Reason has to be entered for 102

Hi,
When i try to delete the confirmation for Goods, an error -"A reason has to be entered for movement type 102" is occuring. I have maintained the reason for rejection in the document tab at the line item level while deleting the confirmation.The reason for movement field is mandatory in R/3 system for movement type 102. I have maintained this reason for rejection that has maintained in the R/3 system in the SRM config and able to select that during deletion of confirmation, but still i am getting this error. Please suggest.
Regards
GGL

sorry for the very late reply..
Note 1345896 - Error due to reason for movement when deleting the GR in EBP
When we try to delete a goods confirmation with the Reason for Rejection text in SRM, we get the error "A reason has to be entered for movement type 102" (M7 325) thrown from the backend R/3 system.
Other terms
M7 325, RREJ, Reason for Rejection, MOVE_REAS, c_subtype_ca, LBBP_CFF60, FORM mapping_gr_for_backend.
Reason and Prerequisites
This is caused by a program error
it helps aothers too

Error while deleting the Data Source

Hi gurus,
I am getting an error while deleting a Data Source - "Source system XXXXX not found RSAR205".
but that source system no more available.
Is there any way to delete the Data Source.
Thanks in advance.
CK.

Hi,
That source system deleted.
Using RSDS also same error.
Thanks,
CK
Edited by: CK on Oct 3, 2008 11:37 AM

Error while deleting the Products from TOP N List

Hi ,
I have been using FM "CRM_PRP_PROD_I_UPDATE_DU" to delete products from the TOP N List but while executing i am getting an error "Error upon posting object 'PRP_PROD_I' / table CRMM_PRP_PROD_I'". Kindly let me know where am i going wrong.
Thanks & Regards,
Shwetha.

Hi......
I think in the ODS setting Unique Data Records checkbox is ticked........if so.........The DataStore object can be used for loading unique data records...........If the loaded request does contain data that is already in the DataStore object, activation of the request will lead to an error.
Find the request in SE16>>RSICCONT table .........and try to delete there....it may work........
Check this.....
u2022 Note 1007717 -Deleting from Data Store object: Termination w/o log
u2022 Note 998704 - Deleting req from DataStore obj: Status at end of processing
u2022 Note 1037507 - System Termination when you delete from DataStore objects
Regards,
Debjani.....

Error while deleting the data from DSO

Hi Experts
I am getting the ABAP Dumps when I am trying to delete the data from the DSO Objects in my Systems.
"    An entry was to be entered into the table
     "\FUNCTION=RSAR_ODS_GET\DATA=L_TH_ISOSMAP" (which should have
    had a unique table key (UNIQUE KEY)).
    However, there already existed a line with an identical key.
The insert-operation could have ocurred as a result of an INSERT- or
    MOVE command, or in conjunction with a SELECT ... INTO.
The statement "INSERT INITIAL LINE ..." cannot be used to insert several
     initial lines into a table with a unique key.     "
I have tried with multiple DSO's and Have the same issue. Please need your suggestions.
Regards,
Mahesh

Hi......
I think in the ODS setting Unique Data Records checkbox is ticked........if so.........The DataStore object can be used for loading unique data records...........If the loaded request does contain data that is already in the DataStore object, activation of the request will lead to an error.
Find the request in SE16>>RSICCONT table .........and try to delete there....it may work........
Check this.....
u2022 Note 1007717 -Deleting from Data Store object: Termination w/o log
u2022 Note 998704 - Deleting req from DataStore obj: Status at end of processing
u2022 Note 1037507 - System Termination when you delete from DataStore objects
Regards,
Debjani.....

Fact table with datetime measure showing #value error while browsing the cube

Hi All,
I have a cube with a fact table having datetime measure.
when I browse the cube, I am able to see the data for all measures except for the measure with the datetime as datatype.
Thanks in advance.

Hi jarugulalaks,
Actually this forum is to discuss:
Visual Studio WPF/SL Designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System, and Visual Studio Editor.
To make this issue clearly, would you mind letting us know more information about this issue? Whether it is the VS IDE issue? Which language are you using? Which kind of app are you developing? Maybe you could share us a screen shot about it.
But like this case posted by you here:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/bc2d30b8-a60d-4f0f-a273-b7cf0f5aaed5/value-error-for-datetime-measure-in-ssas?forum=visualstudiogeneral#bc2d30b8-a60d-4f0f-a273-b7cf0f5aaed5
If it is the SSAS issue, please post this issue to the SSAS forum for dedicated support.
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Java.sql.SqlRecoverableException error while querying the cube

Hi
I get the following error when I try to query the cube from a Java program
java.sql.SqlRecoverableException: no more data to read from the socket.
This error occurs sometimes and sometimes it does not occur.
We observed that if many people simultaneously try to query the cube the error crops up.
Is this a bug or is there a solution or a method to deal with this sort of situation

That sounds like the connection to the database is not there, or was dropped. Check that you are not maxed out on the number of processes.

Oracle Express Error while building the cube

When we try to build the Express cube using Relation Access manager's Hybrid Maintenance, We encountered the following error raised by the exception manager.
"SYSTEM ERROR RSALOC02"
We are using ODBC drivers for connecting and fetching data from oracle RDBMS. When we checked the Log file of the cube, junk characters were printed at the end of the Log.
signal errorname errortext
2 FCH.D3 FCH.D4 FCH.D5 FCH.D6>-
8 THEN-
' ' _sqlerrm)
p
2 hkT2 ! _W2p ) 1 @ H H>8 @U-0 r

It could be the version of ODBC you are using, or some invalid characters in the data you are trying to fetch. Since this issue is very specific you would be better to open a TAR on metalink. Thanks.

Error to delete the cube

Similar Messages

Maybe you are looking for