Error to Move the Database Path to another disk Exchange 2010

Im running Windows Server 2008 with exchange 2010 installed.
My C:
drive is full, I mean move
the mailbox database to drive E: ,
but I get an error:
Summary: 1 item(s). 0 succeeded, 1 failed.
Elapsed time: 00:18:11
Mailbox Database 0219108796
Failed
Error:
Processing data for a remote command failed with the following error message: The WinRM client cannot complete the operation within the time specified. Check if the
machine name is valid and is reachable over the network and firewall exception for Windows Remote Management service is enabled. For more information, see the
about_Remote_Troubleshooting Help topic.
Exchange Management Shell command attempted:
move-DatabasePath -Identity 'Mailbox Database 0219108796' -EdbFilePath 'E:\Microsoft\Exchange Server\V14\Mailbox\Mailbox Database 0219108796\Mailbox Database
0219108796.edb' -LogFolderPath 'E:\Microsoft\Exchange Server\V14\Mailbox\Mailbox Database 0219108796'
Elapsed Time: 00:18:11
how
to solve this problem?
Thanks,

I followed the
recommended way by Microsoft,
http://technet.microsoft.com/en-us/library/dd351168.aspx
the current state of my
C: drive has exceeded 85%.
and I will move the mailbox database
to another new Drive dedicated for database Mailbox
because the mailbox database
has a size of more than 70%.
How to resolve this problem?

Similar Messages

How do I move the /Users folder to another disk

I have a shiny new MacPro, dual proc, with four, one TB hard drives in it, running OS X Server on Mountain Lion. The first disk is the startup drive, the other three are simply empty, partitioned drives.
I am to be the sysadmin for this machine (and a half dozen Macbook Pros) for my organization. I don't want user data to exist on the startup disk on this machine. Right now, the only user that exists is my sysadmin account. I want the three non-startup hard disks to hold the user data. I think that what I want to do is map the /Users folder to one (or all) of the other three hard disks, and get that data off of the startup disk.
How do I change the location of the /Users folder?
Assuming this is possible, or desirable, the next question would be about RAID. I have not created any RAID arrays using disk manager yet (this Mac Pro does not have a RAID card).
Should I first create a concatenated RAID set from the three additional disks? I see no advantage to striped or mirrored sets, I will have a HUGE external drive for TimeMachine, and disk access speed is just fine. But, I think I'd want drives 2, 3, and 4 to act as one big drive. I think the concatenated RAID set is the answer to that.
Thank you,
Jess

How to relocate system and user data to another drive:
http://support.apple.com/kb/HT4337
http://chris.pirillo.com/how-to-move-the-home-folder-in-os-x-and-why/
I would only use TimeMachine as an add'l, not primary, or only method for backups.
How to clone your system:
http://macperformanceguide.com/Mac-HowToClone-backup.html
http://macperformanceguide.com/Mac-HowToClone.html
http://www.macupdate.com/app/mac/7032/carbon-copy-cloner
http://www.macperformanceguide.com/blog/2012/20120711_2-MacPro-internal-clone-ba ckup.html
With drives of 2, 3 or 4TB now why use three and the one time I used Apple's concatenate, no I didn't like the way it made use of drives. So I would either stripe or mirror, and maybe not even using Apple Disk Utility.

Error code: 0x80070035 The network path was not found

"Error code: 0x80070035 The network path was not found" while trying to access another PC running Windows 7 Ultimate I searched and read dozens of similiar posts to try to resolve this issue with no success.
The situation is, I have a router in home with 4 PC's connected. My central PC is running Windows 7 Ultimate. The others are Windows 7 Ultimate again, and 2 running XP Pro. No special Firewalls, just have Windows Firewall enabled on all PC's, and am running KasperskyInternetSecurity2010 on all. (Have disabled these on all PC's and tried to view/connect and it didnt make a difference, same error)
Fact one: not attempting a Homegroup connection at all, just simply wishing to connect in a basic network environment where I can drag and drop files between all PC's in my Home Network or in my house , however its considered. But on the Windows 7 I am unable to view either of the XP's only the other Win7, and when I try to access that one is when I get the "Error code: 0x80070035 The network path was not found".
Furthermore, while troubleshooting the problem I opened a Command Prompt in all computers, then an "ipconfig" to view each ip address. Then began to ping each machine to determin connectivity. Which resulted in partial success. My main Win7 machine (which i am on now) was able to ping successfully to all machines. But all other machines were unable to ping to me (main Win7). with a 100% loss.
So at least I determined this is most likely a helpful fact in resolving this. Going into "services.msc" I made sure that all the obvious services are started and running:
DCHP Client, Homegroup Listener, Homegroup Provider, Link-Layer Topology Discovery Mapper, NetTcp Port SHaring Service, Network Connections, Network List Service, Network Location Awareness, TCP/IP NetBIOS Helper
All strarted and running in Automactic mode.
Not sure what other information I can give at this point, to help assist in fixing this problem. Please dont hesitate to ask for me for more info if needed. Ready and willing to try anything to get this working, except for reinstalling the OS. All my programs work great and do not wish to go through the drama ao reinstalling all my programs and activating them and redoing all my Adobe settings and CAD settings.
Someone please help !

Hi,
In addition, I would like to suggest the following:
Enable NetBIOS over TCP/IP:
1.    Go to “Control Panel\Network and Internet\Network Connections”.
2.    Right-Click on the connection and choose Properties.
3.    Click “Internet Protocol (TCP/IP) Version 4” in the list.
4.    Click Properties, and then click Advanced.
5.    On the Advanced TCP/IP settings windows, go to “WINS” tab.
6.    Under NetBIOS setting, click “Enable NetBIOS over TCP/IP”, and then click OK.
Thanks.
Nicholas Li - MSFT

Error while Registering the Database with Catalog..

I m creating recovery catalog in same database, and getting the errors.
1. I have created TOOLS tablespace
2.CREATE USER RMAN2
SQL> CREATE USER rman IDENTIFIED BY cat
2 TEMPORARY TABLESPACE temp
3 DEFAULT TABLESPACE tools
4 QUOTA UNLIMITED ON tools;
CREATE USER rman IDENTIFIED BY cat
ERROR at line 1:
ORA-01920: user name 'RMAN' conflicts with another user or role name
SQL> ed
Wrote file afiedt.buf
1 CREATE USER rman2 IDENTIFIED BY cat
2 TEMPORARY TABLESPACE temp
3 DEFAULT TABLESPACE tools
4* QUOTA UNLIMITED ON tools
SQL> /
User created.
3. GRANT RECOVERY_CATALOG_OWNER
SQL> GRANT RECOVERY_CATALOG_OWNER TO rman2;
Grant succeeded.
4. To create the recovery catalog:
1. Connect to the database that will contain the catalog as the catalog owner.
H:\>rman catalog rman2/cat@rock
Recovery Manager: Release 10.2.0.1.0 - Production on Fri Sep 5 10:45:52 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
connected to recovery catalog database
2. Run the CREATE CATALOG command to create the catalog.
RMAN> CREATE CATALOG;
recovery catalog created
3. Optionally, start SQL*Plus and query the recovery catalog to see which tables were created:
H:\>sqlplus
SQL*Plus: Release 10.2.0.1.0 - Production on Fri Sep 5 11:53:36 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Enter user-name: rman2/cat
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL> select count(*) from cat;
COUNT(*)
91
SQL> ed
Wrote file afiedt.buf
1 select owner, table_name, tablespace_name
2 from dba_tables
3* where table_name='DB'
SQL> /
OWNER TABLE_NAME
TABLESPACE_NAME
RMAN2 DB
TOOLS
RMAN DB
ABAMCO_TEST
Next step is to registering the Database in the Recovery Catalog.
Registering a Database in the Recovery Catalog
H:\>rman TARGET / CATALOG rman2/cat@rock
Recovery Manager: Release 10.2.0.1.0 - Production on Fri Sep 5 11:56:09 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00554: initialization of internal recovery manager package failed
RMAN-04005: error from target database:
ORA-01031: insufficient privileges
I m getting above error while registering the Database with Catalog,
Can anybody help me how can I register the Database with Catalog.????
Waiting for Reply!!!!!!!

Dear Manoj I can log in at TARGET Database.
H:\>rman
Recovery Manager: Release 10.2.0.1.0 - Production on Fri Sep 5 12:41:59 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
RMAN> connect target sys/rock
connected to target database: ROCK (DBID=3255117147)
RMAN>
============================================================
USING CONNECT STRING as you said.
H:\>rman target "sys/rock@rock as sysdba" catalog rman2/cat@rock
Argument Value Description
target quoted-string connect-string for target database
catalog quoted-string connect-string for recovery catalog
nocatalog none if specified, then no recovery catalog
cmdfile quoted-string name of input command file
log quoted-string name of output message log file
trace quoted-string name of output debugging message log file
append none if specified, log is opened in append mode
debug optional-args activate debugging
msgno none show RMAN-nnnn prefix for all messages
send quoted-string send a command to the media manager
pipe string building block for pipe names
timeout integer number of seconds to wait for pipe input
checksyntax none check the command file for syntax errors
Both single and double quotes (' or ") are accepted for a quoted-string.
Quotes are not required unless the string contains embedded white-space.
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00552: syntax error in command line arguments
RMAN-01009: syntax error: found "as": expecting one of: "append, at, auxiliary, catalog, cmdfile, clone, checksyntax, debug, log, msglog, mask, msgno, nocatalog, pipe, rcvcat, script, slaxdebug, send, target, timeout, trace"
RMAN-01007: at line 0 column 16 file: command line arguments
H:\>rman
It didnt work either.
I have only one database rock, and created recovery catalog in it. I want to register rock database with recovery catalog.

Error Code 0x80070035 - The network path was not found, Windows Server 2008 SP2

I have bee receiving following "error code 0x80070035 - The network path was not found" when trying to open file shares in both directions using Windows Server 2008 Standard SP2 at both ends. The issue is identical to the KB article KB958285, however the hotfix is only valid up to but not including SP2. One of the servers in question has moved several times between 2 subnets seperated by a VPN. I have tried changing settings in and around the local NIC/DNS Suffix and in the network connection sharing centre, but with no luck. Firewalls are turned off at both sites, and pings and AD queries are successful (one server is a DC). DNS is also working correctly at both sites. Any help/suggestions would be appreciated.
Richard

I thought I would add in another scenario, since this link came to the top of my list in the search engine.
We are running 2008 R2 with SP1 (it happened without SP1 as well)
We could not map using UNC (IP, FQDN, or netbios name). We could ping access the other servers via other utils like event viewer and services.msc but just could not map.
In our case it turned out to be a VMWARE issue but we still had to make a regedit change first
You have to go to regedit HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\NetworkProvider\Order\
And add LanmanWorkstation to Providerorder
I found on a Citrix board that citrix has an issue with this as well
If you're running VM here is an additional step you should do as well
When you upgrade VMware Tools installed with HGFS from ESX 3.x to ESX 4.x, the HGFS driver may not get uninstalled properly. In this case, the virtual machine's network Provider Order tab in Network Connections
> Advanced > Advanced Settings displays incorrect information and the virtual machine may lose network connectivity.
To avoid this issue, uninstall VMware Tools 3.x before installing VMware Tools 4.x.
To workaround this issue, if you have already upgraded VMware Tools:
Click Start >
Run, type regedit, and click OK. The Registry Editor window opens.
Navigate to
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\NetworkProvider\Order\.
Delete the reference to
hgfs.
Reboot the virtual machine.
We found that if you strip out the HGFS, you do not have to reboot for the provider order tab to come back
I hope that this saves people a lot of time. I spent days researching this.
This was the solution for me on 2008 R2 DC w/ Exchange. I do not have VMWare installed but do have Hyper-V. Thank you so much!

Rented movie error that movie has been copied to another device

I rented a movie tonight and tried to copy it to my Nano, but receive error that movie has been copied to another device, but this is not possible as i only have my computer and ipod. help!

For borrowed do you mean rented? The exact error message helps others to help you.
Rented movies can only be on one device or computer at a time, expire if not watched within 30 days and once you begin watching expire within 24 hours (US) or 48 hours elsewhere. See HT1657 - iTunes Store: Movie rental frequently asked questions (FAQ). If there has been a problem transferring the content then you might want to use the report a problem links in your account history to contact the iTunes Store support team.
tt2

Error while opening the database.--urgent---pls help...

Hi,
Got the below error while opening the database.
Database version is :10.1.0.4.0
database is in noarchive log mode.
the database is coming in to no-mount state and mount state quite easily but not able to open the database.
Got the below error while opening the database.
ORA-00600: internal error code, arguments: [4194], [37], [31], [], [], [], [], []
ORA-00600: internal error code, arguments: [4194], [37], [31], [], [], [], [], []
Mon Sep 29 15:32:39 2008
Errors in file /xxx/udump/aaa_ora_18737.trc:
ORA-00600: internal error code, arguments: [4194], [37], [31], [], [], [], [], []
ORA-00600: internal error code, arguments: [4194], [37], [31], [], [], [], [], []
Mon Sep 29 15:32:41 2008
DEBUG: Replaying xcb 0xc0000000350c1c18, pmd 0xc0000000353b21f0 for failed op 8
Doing block recovery for file 2 block 9483
No block recovery was needed.
on Sep 29 15:34:01 2008
Errors in file /xxx/udump/aaa/bdump/aaa_pmon_18723.trc:
ORA-00600: internal error code, arguments: [4194], [37], [31], [], [], [], [], []
Mon Sep 29 15:34:04 2008
Errors in file /xxx/udump/aaa/bdump/aaa_pmon_18723.trc:
ORA-00600: internal error code, arguments: [4194], [37], [31], [], [], [], [], []
PMON: terminating instance due to error 472
Instance terminated by PMON, pid = 18723
Please help me....................

Hi..
This ORA-600 refers to a mismatch has been detected between Redo records and rollback (Undo) records.Is better to lock a call with oracle support.Secondly, apply latest patch on the DB.
I had expereiced the same error, but my DB was in open mode, so i created a new undo tablespace and changed the undo_tablespace parameter and it worked.
Anand

Error while starting the Database

Hi,
I am getting the following error while starting the Database instance.
ORA-03113: end-of-file on communication channel.
How to fix this issue? i tried some of the options mentioned in docs in metalink. But still i am not able to fix.
Anypointers on this is appreciated.
Thanks & Regards,
Srikanth

Can you paste lines from alertlog file..

A database error occured. The database error text is: ORA-29275: partial multibyte character . (WIS 10901)

Hi,
My Webi report is geeting failed with the error
"A database error occured. The database error text is: ORA-29275: partial multibyte character . (WIS 10901)"
may i know the root cause of the above error and how to resolve it. I am using BO 3.1.
Its very important to provide the report. Please help urgently.
Thanks in advance.
Abid

Hi Abid,
Please see SAP Note 1556127.
Symptom
A database error occurs after refreshing a web intelligence report in java report panel or web intelligence in interactive mode
The database error text is: ORA 29275 with partial multibyte character (WIS 10901)
Environment
windows 2003 Server
Cause
Environment variables are not set with value UTF-8:LC_ALL,LANG, and NLS_LANG
Resolution
Set following system environment variables: LC_ALL,LANG, and NLS_LANG with value UTF-8. For example, LC_ALL=EN_US.UTF-8

Error when uninstalling App-V RDS client: Product: Microsoft Application Virtualization (App-V) Client for Remote Desktop Services 5.0 Service Pack 2 x64 -- Error 1324. The folder path 'C:' contains an invalid character

Issue: experienced when attempting to uninstall the App-V 5.0 SP2 RDS client.
Event Log: Product: Microsoft Application Virtualization (App-V) Client for Remote Desktop Services 5.0 Service Pack 2 x64 -- Error 1324. The folder
path 'C:' contains an invalid character
Symptoms (when in this current state):
Unable to uninstall the SP2 client
You can upgrade the client (via hotfix) and uninstall the hotfix, but you will not be able to remove the SP2 client
AppvVfs filter driver will not create an instance, therefore applications will not be able to read into existing streamed VFS content, or trigger sparse files to stream content. (you can still stream the content via other means, like the UI or powershell)
Because of the AppvVfs filter driver not instantiating, applications that depend on licences that exist in VFS will not be able to be read causing certain applications to react as if the license does not exist or is an incorrect format

Resolution:
Check for the existence of a hidden folder named %appdata% in the C:\Program Files\Microsoft Application Virtualization\Client folder. (You will need to un-check the folder options box in windows explorer for "Hide
protected operating system files" to see it)
If the hidden %appdata% folder exists, delete it.
Proceed to uninstall the App-V client
After a clean uninstall and removal of remnants of the client, reinstall the client again and apply the latest hotfix available (Hotfix 2 for SP2 at a minimum).

SQL error occurred in the database when acces

Dear All,
I am getting following error message while doing file to file scenario.
source side messages are pickedup and entering into the Queues .receiver side i cant able to see any souce messages.
SYSFAIL Message is showing in the Queues when i was double click that message its giving following message.
SQL error occurred in the database when acces
a table.
Plz, help me in this regard.
Thanks,
Mahesh

Hi Mahesh,
Did you get a chance to check the IPC log directories
Also usually for a sysfail message you can check the smw01
You will see a bdoc with status F05. What does it say there?
or
Is it "Scheduled for outbound processing" or "recorded for outbound processing".
I guess the message has not been processed, so the next step is to go to transaction SMQ2, and check for info as to why it is not processed.
If you see a queue status of SYSFAIL, first try resetting it to "Ready" again. If it still fails then, delete that particular LUW. And if you still have some more messages in the queue just click the unlock queue button.
Reward points if this helps
Regards
Pragathi.

Move the DataBase ORACLE 9i to other server

I have a DataBase ORACLE 9i in a Power 6 with operation system RedHat Linux 4 PPC64 and datafiles, redologs, etc.. in /ext3.
My database lun's are into external storage like a EMC or IBM.
I need to move the DataBase ORACLE 9i to other server itanium IA 64 RedHat Linux 4 with /ext3 running DataBase ORACLE 9i.
I intend to remap these lun's and mount this /ext3 to this node.
1- This is possible?
2- The DataBase ORACLE 9i will start in the itanium IA 64 server?
Edited by: E.Vargas on Feb 12, 2010 8:10 AM

Read about 'Transportable tablespace' and about 'cross platform transport' topics from oracle 10g and oracle 11g documentation. In 9i it's not possible.
Related dynamic performance views in 10g/11g are,
v$TRANSPORTABLE_PLATFORM, V$DB_TRANSPORTABLE_PLATFORM, V$DBFILE

Error in initializing the database engine

Hi everyone,
We are currently facing a problem while trying to login the MDM repository. Earlier we got the WinSock error after that we were not able to login to the repository, afterwards we try to remount tyhe server but it showing the following error "ERROR IN INITIALIZING THE DATABASE ENGINE". If anyone has any clues/relative answers please help, its very urgent. We think this is due to the some problem in the database, we are currently using Oracle 10g.
Full Points will be given to helpful answers.

Hi Tejas,
We are also in a similar spot now.
Can you pls guide us how you solved your problem. Hope we can use your expertise here.
Thanks,
Abdul

A database error occured. The database error text is: ORA-00932: inconsiste

Hi Experts,
In WebI XI 3.1, i am getting this error when i run webi report against a derived table "A database error occured. The database error text is: ORA-00932: inconsistent datatypes: expected NUMBER got DATE ". The derived table is designed in such a way that it populates only last week data, however, the result populates data for last week and current week. For the current week, it shows date range from feb19 to feb25, so the data is not correct. how can i get rid of current week.

Hello, the error means that it is pulling a field with DATE type instead of a number, you should convert the date to a number at universe or document level.

EMC Does Not Show All Databases Copies Information on DAG - Exchange 2010 SP2

Hi guys,
Really need your help here, suddenly my customer complain that they cant see any information on database copies on their Active Copy DAG Exchange server, for another DAG members, the database copies information is visible. After do some readings, I found
this related to Exchange 2010 SP1 known issue.
http://workinghardinit.wordpress.com/2010/09/13/emc-does-not-show-all-database-copies-after-upgrade-to-exchange-2010-sp1-still-investigating/
But, for my environment, there is Exchange 2010 SP2. I have no idea on this issue since there is no error log thrown out from the event viewer. I already try to restart the server itself and the Microsoft Information services but no luck.

Hi,
Based on the description, your customers could see passive database copy information, but they couldn’t view the detail information such as state: Healthy in EMC.
When did this issue begin?
Please restart the AD topology service to check result.
Since we have the information correctly on Exchange shell, please try to clear EMC cache and then open console to check if you can see database copy in EMC.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Belinda Ma
TechNet Community Support

Error to Move the Database Path to another disk Exchange 2010

Similar Messages

Maybe you are looking for