Error to Open the IR and ID

Hi,
I have the problem for to use the IR and ID.
When execute the link apper the following error:
Unable to connect to server xxxx:50004. Cannot open connection on host: xxx.xxx.xxx.xxx and por 50004
who i now if the port or the services is available?
Regards.

Hi Moorthy.
Hi review the blog and execute the telnet to the ports 50000, 50004 and 5008.
The ports 50000 and 50008 response OK but the port 50004 not response.
who i can to review the ports in the server?
Best Regards.

Similar Messages

I bought the Keynote app for my MacBook, but when I open the application and try to install it, I get an error message saying that the application will not work with my MacBook. What gives? And, can I please request a refund? ($19.99 = a week's groceries)

I bought the Keynote app for my MacBook, but when I open the application and try to install it, I get an error message saying that the application will not work with my MacBook. What gives? And, can I please request a refund? ($19.99 = a week's groceries).
Thank you for your help! - I did try looking for all available specs about Keynote on the Apple iTunes website, and found nothing that could help me. HELP!

1
Close all iWork applications
2
Uninstall Keynote; this must be done with an application remover tool to delete the installation properly. Appcleaner is known to work correctly for this purpose, it is free and can be downloaded from here: Appcleaner Download
3
empty the trash
4
shutdown the Mac and restart. After the start up chime, hold down the shift key until the apple logo appears
let the Mac complete the start up procedure completely, it will take longer than usual as the hard drive is being repaired
5
Reinstall Keynote by logging into the Mac App Store using download / install

Cannot load programs they either have error or you open the app and it returns to main menu

Cannot load programs they either have error 606 or you open the app and it closes and goes to main screen

Best to do a soft restart, <Hold down the "off" key on top and the "home" button at the bottom until it resets and you see the apple logo. It usually helps with those issues.

HT1657 I rented a movie on Itunes last night and I watched half of it before falling asleep. Today I tried to open the movie and watch the last half but I cannot find it. It has been less than 24 hours since I rented it. Where can I find the movie?

I rented a movie on Itunes last night and I watched half of it before falling asleep. Today I tried to open the movie and watch the last half but I cannot find it. It has been less than 24 hours since I rented it. Where can I find the movie?

I found my answer in another Thread and it worked... so for anyone who needs it, here it is:
https://discussions.apple.com/message/19134562#19134562
Had the same problem and spoke with Apple Support. They had me reset the System Management Controller:
Shut down the computer. With the computer off, on the left hand side of the keyboard press shift+control+option along with the power button simultaneously and release. Wait 5-10 seconds and restart the computer.
This solved my problem and I was immediately able to purchase, download, and play an HD movie from iTunes w/o any error message.

Error while opening the backup information fom Maxdb

Hello All,
I am getting the below error while opening the backup information from Maxdb.
Backup history file /sapdb/data/wrk/<sid>/dbm.knl corrected in line <xxxx> ; 2012-02-21 07:30:25 can not be convert in to a signed 32 bit integer value
The full line is as below from the dbm.knl file:
4F4337C5014C|LOG_000030571|SAVE WARM|2012-02-21 07:16:03|2012-02-21 07:20:49|2012-02-21 07:20:53|2012-02-21 07:21:04|2605155691|2605244F433A01014E|LOG_000030573|SAVE WARM|2012-02-21 07:26:09|2012-02-21 07:30:24|2012-02-21 07:30:25|2012-02-21 07:30:41|2605326357|2605411689| |<SID>_LOG | 85344| 0| 0| |
I am able to open and check this line in the file dbm.knl ; But, i am not getting why this error is occurring while opening the backup information from Maxdb. I am able to view the backup logs through LC10.
Currently i am getting this error and when i am click on cancel (or ok) getting the blank page. I am not able to view the backup logs form Maxdb.
Please give me some hint to resolve this.
Regards,
Nagendra.

Hi,
Use below procedure
1. Go to /sapdb/SRD/data/wrk
2. cp -rp dbm_knl dbm_knl_OLD
3. vi +<Line in which the corruption occured> dbm.knl
see there must be a corruption in the given line and it will specified with a green color
delete that part and make the format as per the above line
4. save the file
5. execute the procedure again from Database studio or Database Manager
(Note: Make sure that you have taken the backup first of dbm.knl file Because any extra entry may cause another corruption)
(FYI : This file is only log file of successful backups and returns the return-code)
Regards,
Paramvirsinh Jetawat
SAP BASIS Consultant

Getting a heap error while opening the BI Publisher Console login page

Hi,
I have installed BI Publisher 10.1.3.4.2 on OC4J on Windows 7 OS and getting the following error on opening the BI Publisher Login Console.
*2013-04-30 20:44:31.921 NOTIFICATION J2EE JSP-0008 Unable to dispatch JSP Page*
*: Exception:oracle.jsp.provider.JspCompileException: <H3>Errors compiling:C:\Ora*
Home_2\oc4j_bi\j2ee\home\application-deployments\xmlpserver\xmlpserver\persisten
ce\_pages\\_login.java</H3><pre>Could not create the Java virtual machine.
Error occurred during initialization of VM
Could not reserve enough space for object heap
*</pre>*
Thanks !

set the JAVA_HOME environment variable to point to the same location where the JDK for OC4J standalone is located

Error while opening the BO report

Dear Experts,
Am getting following error while opening the reports through Xcelsius.You cannot amke a connection to the BusinessObjects web service ( LO 02010)
Failed to get the document information. (LO 26315)
Some objects are no longer available in the universe .See your BO admin ( Error : WIS 00001)
Actually am the BO administrator , Yesterday I 've changed license key for Xcelsius and BO Enterprise...

Hi ,
You can view the following URl ,which may be helpful for you.
Live office excel error
-Thanks,

Error while opening the file store file "WLS_DIAGNOSTICS000000.DAT".....

I have a WL 9.2.1 running on Sun solaris o/s .....it is failing to start thowing the following exception
<Mar 19, 2009 5:21:17 PM EDT> <Critical> <WebLogicServer> <BEA-000362> <Server failed. Reason:
There are 1 nested errors:
weblogic.diagnostics.lifecycle.DiagnosticComponentLifecycleException: weblogic.store.PersistentStoreException: java.io.IOException: [Store:280021]There was a
n error while opening the file store file "WLS_DIAGNOSTICS000000.DAT"
at weblogic.diagnostics.lifecycle.ArchiveLifecycleImpl.initialize(ArchiveLifecycleImpl.java:44)
at weblogic.diagnostics.lifecycle.DiagnosticFoundationService.start(DiagnosticFoundationService.java:107)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
Caused by: weblogic.store.PersistentStoreException: java.io.IOException: [Store:280021]There was an error while opening the file store file "WLS_DIAGNOSTICS0
00000.DAT"
at weblogic.store.io.file.Heap.open(Heap.java:166)
at weblogic.store.io.file.FileStoreIO.open(FileStoreIO.java:85)
at weblogic.store.internal.PersistentStoreImpl.open(PersistentStoreImpl.java:350)
at weblogic.store.PersistentStoreManager.createFileStore(PersistentStoreManager.java:202)
at weblogic.diagnostics.archive.DiagnosticStoreRepository.getStore(DiagnosticStoreRepository.java:61)
at weblogic.diagnostics.lifecycle.ArchiveLifecycleImpl.initialize(ArchiveLifecycleImpl.java:42)
... 4 more
Caused by: java.io.IOException: [Store:280021]There was an error while opening the file store file "WLS_DIAGNOSTICS000000.DAT"
at weblogic.store.io.file.StoreDir.throwIOException(StoreDir.java:213)
at weblogic.store.io.file.StoreDir.open(StoreDir.java:103)
at weblogic.store.io.file.Heap.open(Heap.java:164)
... 9 more
Caused by: java.io.IOException: Error from fcntl() for file locking, Resource temporarily unavailable, errno=11
at weblogic.store.io.file.direct.DirectIONative.open(Native Method)
at weblogic.store.io.file.direct.DirectFileChannel.<init>(DirectFileChannel.java:51)
at weblogic.store.io.file.direct.DirectIOManager.open(DirectIOManager.java:138)
at weblogic.store.io.file.StoreFile.openInternal(StoreFile.java:112)
at weblogic.store.io.file.StoreFile.open(StoreFile.java:142)
at weblogic.store.io.file.StoreDir.open(StoreDir.java:95)
... 10 more
i went ahead and checkd the file and the privs on the file they look correct -rw-r--r-- ...but when i just restart it ..it starts with no errors the next time......What could be the issue.....please help
Then only reason i could think of is the size of the file is 35MB now...is this the problem....if yes....is there a way to automaticaly rotate this file ....

The root cause appears to be right in the stack trace:
Caused by: java.io.IOException: Error from fcntl() for file locking, Resource temporarily unavailable, errno=11I think this indicates that either the file was either locked (because another instance of WebLogic had it opened), or that the file was unavailable for some reason. WebLogic locks files as a safety precaution to prevent misconfigured setups (multiple domains sharing the same directory and store name) from attempting to share the same file.
I don't think that this message necessarily means there is a file corruption.
As for rotation, the file store automatically adds new files as needed (I think its 1 file for every 2GB of data). The "diagnostics" file store is generated by the optional diagnostics feature, and I think that this feature has options for controlling the amount of stored data.
Tom

Error while opening the database.--urgent---pls help...

Hi,
Got the below error while opening the database.
Database version is :10.1.0.4.0
database is in noarchive log mode.
the database is coming in to no-mount state and mount state quite easily but not able to open the database.
Got the below error while opening the database.
ORA-00600: internal error code, arguments: [4194], [37], [31], [], [], [], [], []
ORA-00600: internal error code, arguments: [4194], [37], [31], [], [], [], [], []
Mon Sep 29 15:32:39 2008
Errors in file /xxx/udump/aaa_ora_18737.trc:
ORA-00600: internal error code, arguments: [4194], [37], [31], [], [], [], [], []
ORA-00600: internal error code, arguments: [4194], [37], [31], [], [], [], [], []
Mon Sep 29 15:32:41 2008
DEBUG: Replaying xcb 0xc0000000350c1c18, pmd 0xc0000000353b21f0 for failed op 8
Doing block recovery for file 2 block 9483
No block recovery was needed.
on Sep 29 15:34:01 2008
Errors in file /xxx/udump/aaa/bdump/aaa_pmon_18723.trc:
ORA-00600: internal error code, arguments: [4194], [37], [31], [], [], [], [], []
Mon Sep 29 15:34:04 2008
Errors in file /xxx/udump/aaa/bdump/aaa_pmon_18723.trc:
ORA-00600: internal error code, arguments: [4194], [37], [31], [], [], [], [], []
PMON: terminating instance due to error 472
Instance terminated by PMON, pid = 18723
Please help me....................

Hi..
This ORA-600 refers to a mismatch has been detected between Redo records and rollback (Undo) records.Is better to lock a call with oracle support.Secondly, apply latest patch on the DB.
I had expereiced the same error, but my DB was in open mode, so i created a new undo tablespace and changed the undo_tablespace parameter and it worked.
Anand

Error Message "Error while Opening the Document"

Hi Friends,
I have a problem while opening the SFP transaction and Clicking on the Layout Tab the SAP System is giving an error message saying "Error while Opening the Document".
I have tried testing on several systems like IDES, ERP, Retail systems. But it is giving me same error. Is this the problem with ADOBE LIVECYCLE DESIGNER?
And when I click on the Performance Assistant it has given me some information:
Error while opening document
Message no. SOFFICEINTEGRATION143
Diagnosis
An error occurred in the desktop application while opening a document.
Friends can you help me in solving this problem.
Thanking yoy in Advance
Pradeep Goli

Pradeep,
Maybe Live Cycle Designer has not been uninstalled correctly from your system. So goto the following lcaotions and remove the Designer folder if you find them:-
C:\Program Files\Adobe
C:\Documents and Settings\<your-username>\Application Data\Adobe\
Alternatively try installing Live Cycle Designer on some other machine in your network and see if you encounter the same error.
Similar thread for reference : Error - Adobe Live Cycle designer
Chintan

Getting error while opening the workbook

Hi,
I am getting one error while opening the workbook.
Error: The Dependency "Join condition" is not found in EUL.
Basically, the workbook was working fine. But we droped some joins and recreated new joins. After this change, our worknbooks starts giving this error.
Please advice.
Where i can get the dependency information in EUL?
Thanks, rajesh

This has to be one of the most 'pain in the butt' errors you can get (well ... 0000 - normal successful completion is another).
Although I've seen this one for years, these days I'm finding many more examples that are happening to me with this (simply the environment I'm in) and in many cases, requires rebuilding the workbook again. For example, sometimes I put in the join that I think it's having a problem with, but the existing workbook simply won't run. Recreating the workbook exactly the same gets it to work properly. Maybe it's a 4.x thing (version I'm on these days) ... but just a warning that you may well have to rebuild.
Russ

"The server is unavailable this is offline copy of the server workbook" error while opening the sharepoint library file

Hi Techys,
can you give me the suugestions for below error in sharepoint 2010.
Error: "The server is unavailable this is offline copy of the server workbook" error while opening the sharepoint library file.
User having the contribute permission.
as a admin i can open the document without any error.
user wants to open the document via online and VPN connection.
while the user seeing the document info the below error is indicationg .
Offline Copy, Work book is readonly Mode.
The server is unavailable this is offline copy of the server workbook" error while opening the sharepoint library file which was upto date.
Many Thanks,
Madhu

Make sure that the user is able to access workstream from the site collection through VPN. If the user is able to access already, try to download the file locally and see if the data is getting loaded and upload again.
--Cheers

Error When Opening the Transactions/Transactions Window

Hi All,
in Oracle E-Business Suite R12 Version
Error When Opening the Transactions/Transactions Window
ORA-06502: PL/SQL: numeric or value error
ORA-06512: at "APPS.AR_MO_GLOBAL_CACHE", line 55
ORA-06512: at "APPS.ARP_STANDARD", line 2912
ORA-06512: at "APPS.ARP_GLOBAL", line 282
FRM-40735: PRE-FORM trigger raised unhandled exception ORA-06502
Can any body help about the error
Thanks in advance.

Did you go through the below notes:
Note:125204.1, Note:153207.1 and Note:191306.1.

There was an error in opening the doeument.. The file cannot be found

Hi,
A user from our application (IE based) is having an error in opening a pdf document. He's getting the following message:
There was an error in opening the doeument. The file cannot be found.
The error is ecnountered when the link of the document is accessed.
But I was able to open the same document and view it withouth encountering any issue. Also, the issue is not consistent.
Would you know what could have caused the error? can you suggest any things to get rid of the erro?
Joy

What, exactly, were you trying to do when you got it, and how?

PDF file to be attached in mail .Showing error in opening the Document .

Hi ABAP Gurus ,
Good Morning !
I converted a smartform to PDF and sended to function SO_NEW_DOCUMENT_ATT_SEND_API1 to send a mail external...
So, when I tried to open the file attachment, I can't open this file. and I watch a message : 'There was a error in opening the document . The file is damaged and could not be repaired '.
In one of the earlier threds on www. sdn.sap.com i found a solustion which says to use class CL_BCS but I don't know how to use this class or rather use classes in ABAP Programs .
I would be thankful if I am provided the sample code or some help regarding this issue .
I think if somebody provides a solution on how to use function SO_NEW_DOCUMENT_ATT_SEND_API1 that would make me Relieved .
Regards,
D Singh

Thanks Mr. Shehryar Shabbir & Mr. Vijay .
SDN is not allowing to send email id .Plz share the code in SDN.COM .
Regards ,
D Singh

Error to Open the IR and ID

Similar Messages

Maybe you are looking for