Error to send a IDOC from ECC to SUS

Hi,
I am trying to connect to SAP SUS System using HTTP adapter using PI 7.0.The scenario is
ECC ->PI->SAP SRM. I have configured HTTP adapter as the receiver with addressing type as HTTP Destination. I have created a RFC destination of type H pointing to SAP SUS on PI. I have encountered the following error after executing the scenario.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="PLAINHTTP_ADAPTER">ATTRIBUTE_SERVER</SAP:Code>
<SAP:P1>500</SAP:P1>
<SAP:P2>Internal Server Error</SAP:P2>
<SAP:P3>Error during parsing of SOAP header</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>HTTP server code 500 reason Internal Server Error explanation Error during parsing of SOAP header</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
I have configured HTTP receiver with Addressing type HTTP Destination and configured the HTTP destination field with RFC destination(Connection Type H) created on PI. Here my source and target structures are same i.e DELVRY03. I have triggered DELVRY03 idoc from ECC and i am expecting same xml to be sent to SAP SUS but stuck up with the above mentioned error.
Someone know how fix this problem?
Tks,
Erik

HI,
As per my understanding to your scenario, You want to send one IDoc from ECC to SAP SUS system using SAP PI.
So i hope you must have configured on all the steps required to Send one IDoc to PI syste, Secondly, are you using any Standard interface in PI to send data to SAP SUS system? If yes, you need to create an HTTP Destination for that system and then you have to create XI Receiver Adapter with that HTTP destination to post incoming message to SAP SUS system.
Your error suggests you are using Plain HTTP adapter to post data to SAP SUS, which is in my understanding is incorrect.
Regards
Aashish Sinha
Edited by: Aashish Sinha on Feb 21, 2011 9:15 AM

Similar Messages

Error while transferring Purchase Order from ECC to SUS

we are working on plan driven procurement and transferring the PO from ECC to SUS, we are getting the error as "No partner found for partner number ECCSUS8".
In ECC the Vendor No is ECCSUS8, trasfered vendor from ECC to SUS. Vendor registration is done based on the mail generated and vendor login is created in the portal and assigned the roles.

Hi
Are you facing this error in PO transmission to SUS (as you mentioned below)? or you are facing this error while sending out the vendors from R/3 to SUS from BD14?
If you are facing this in vendor transmission, you need to remove the tick (flag) "Use self reg component" in SPRO-SRM server-Supplier Self-ServicesMaster DataMake Settings for Business Partners. Then you can transmit the vendors from R/3 succesfully.
If this error is in PO transmission, need to analyse further.
Pls do let me know.
Thanks
Kiran

Problem when sending IDOC from ECC to MII 12.0

Hi all,
   I have followed the document "[How to Send an IDoc from SAP ECC to the SAP MII IDoc Listener|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/50775783-6cb1-2b10-90b0-e6bc2c0b8563]" to configure the scenario to send IDOC from SAP ECC 6.0 to MII 12.0.
   But when sending 53 IDOCs by Tcode POIT to MII, I have problem as below:
   - 53 IDOCS were successfully outbounded (list in WE02).
   - 8 IDOCs were successfully sent to MII IDOC listener (these 8 IDOCs messages exist in list of Message Monitor).
   - 45 IDOCS were error with message in SM58: "Bean IDOC_INBOUND_ASYNCHRONOUS not found on host xxx, ProgId=yyy".
   I'm wonder why some IDOCs were successful while some others were error. If the bean IDOC_INBOUND_ASYNCHRONOUS don't exist in EJB, why some IDOCs successful found this bean?
   I have another wonder: in this scenario document, all IDOC message type (SYNCH, LOIPRO) is configured in outbound parameters of RECEIVER (receiver logical system), why they weren't configured them in outbound parameters of SENDER (sender logical system)?
   If some have the same problem and know how to resolve it, could you please help me?
Thank a lot in advance,
Vinh Vo

Hi Vinh,
Please read the following document:
[IDOC Listener|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/bpx-community/manufacturing/how%20to%20send%20an%20idoc%20from%20sap%20ecc%20to%20the%20sap%20mii%20idoc%20listener.pdf]
If you explicitly defined a Prog ID in NW, then you have done an extra step and are confusing NW with the real destination.
In basic terms, you set up an RFC destination (with an assigned ProgID) in ERP, then configure MII to point to it.
I suggest that you follow the document completely and do nothing else to set up a new listener.
If you are not using ECC 6.0, you may find the paths are different, but the transactions codes are generally the same. However, you may want to check with some of the older installation instructions regarding specific modifications. Look in the Wiki for MII under Connectivity.
Good luck,
Mike

Vendor Master Replication Error from ECC to SUS : Error in ALE Service

Dear Experts,
We are implementing MM SUS (SRM 5.0). As a part of this we need to replicate vendors from ECC to SUS system via XI. We have created a Reduced Message Type Z_CREMAS_SUSMM and had set up the partner profile in WE20 with SUS logical system as destination and specifing the Message Type, and port of the XI system
We executed the transaction BD14 for replication, it is resulting in error 29 : Error in ALE Service : Entry in Outbound table not found.
Please provide inputs to overcome this problem
Thank you,
Regards,
Ravi

Hi,
Check
Re: Idoc Error Status "Entry in outbound table not found "
Looks like some issue with the partner profile set up for the sender or receiver of the EDI message in WE20.
Set up them again and When these have been set up try reprocessing your IDocs from BD87

Unable to import IDoc from ECC to PI 7.1(ESR)

Hi,
I am creating an IDoc to File scenario in PI7.1 . I am trying to import the MATMAS IDoc from ECC to PI 7.1.So under the SWCV -> Imported Objects - > Wizard to import IDod/RFC opens -> I enter the ECC system login details -> But when I expand the IDoc node here,I find no IDoc from ECC ,moreover it throws me an error " component should be attached to some frame or dialog"
Can you please suggest me as what is going wrong.
Thanks,
Venu

Hi all,
I am using PI 7.3
When I Import object and passing parameter like application server, system number, uid and password.
I got this error
Unable to establish connection to R/3 system servertm_TM9_06 (system=00, client=001)
Troubleshooting information:
Is the target system online?
Check the connection data; server name and group fields are case-sensitive
Tips for administrators (see configuration guide for details):
Does the user have sufficient authorization in the target system?
Is the target system configured correctly in etc/services?
See error logs for details
Please help me.

Settings required to send ROEMPROACT2 XML from ECC to SNC

Hi All,
Can anyone explain the config that will be required on ECC / PI / SNC to send ROEMPROACT2 XML from ECC side and recevie the PAN XML successfully on the SNC side.
I already went through this link : Using ROEMPROACT2 but couldnt understand.
Also what transaction to use to check if the XML has been sent out successfully from the ECC system (Like we use WE05 for the Idocs)
Thanks,
Bharath

Hi Bharath,
In ECC you need to maintained the PI logical system in transaction SXMB_ADMIN.
In PI you need to mapped XML mapping <ECCLogical_system>|ProductActivtyNotification_Out|<SNC_Logical_System>
In SNC you need to maintain ProductActivityNotification_In XML configuration(By default this setting will be there) if it is not maintained then:
Go to SPRO>Supply Network Collaboration>Basic Settings>Processing Inbound and Outbound Messages>Process Types for Inbound Messages-->Assign Inbound XML Messages to Default Process Types
XML Message=ProductActivityNotification_Inbound
Process type=Supplier Collaboration.
Go to transaction code SXMB_MONI or SXI_MONITOR to check XML message in ECC.
Regards,
Nikhil

Urgent: Sending order05 IDOC from R/3 to ICH (SAP SCM) through SAP XI

Hi All
I have requirement where I have to send Order05 IDOC from SAP R/3 (ECC 6) to ICH (SAP SCM 5) through SAP XI (PI 7).
I came to know that there is one standard scenario in SAP SCM Basis content in integration repository.
I never done any XI development, please guide me with the useful links or whole step by step process. I will be very thankful for your inputs.
Please reply asap.
Regards,
Amol

Hi !
Check this note:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bc_xi/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d383336323030%7d
Regards,
Matias.

How to send an iDoc from XI to flat file

hi,
I have send an IDoc from R/3 to XI.The iDoc is being received by XI.Now,I need to send this iDoc to Flat file.
For this,What i need to do?
can any body help me step by step in this regard..........
Thanx in advance..
Sridhar Raju Mahali

Hi Sridhar,
Hope you are clear with the XI portion.
Now for sending the data from IDOC to XI follow these steps...
1.create an RFC destination pointing to <i>XI server</i> in the Business System where IDOC is present, using transaction sm59
2.create a tRFC port in the same Business System using transaction we21
3.create a logical system name using transaction bd54
4.then create a partner profile using transaction we20
5.Now log on to the Business System where IDOC is created.
6.go to we19..execute the idoc and give standard outbound processing on
7.on the values given click and give the sender and recipeint port and partner name and type..
Hope this will help you...
Regards
Suraj

Vendor replication from ECC to SUS

Hi Gurus,
We are replicating vendors from ECC to SUS.
The XML message is failing in the SUS side.
The error is
Error during proxy processing An exception with the type CX_BBPX1_STD_MESSAGE_FAULT occurred, but was neither handled locally, nor declared in a RAISING clause Application
Please find below SXMB_MONI trace
<FAULT_TEXT>Error in XI interface: Exception occurredE:BBP_BUPA_SUPPLIER:089 -Unable to determine logical system of sender; check your data Program:
It seems similar issue has been resolved in the below thread but there is no mention of solution.
ABAP Inbound Proxy Error !
Please help in resolving the issue.
With Regards,
Malay

Hi Malay,
Kindly check if you have defined the logical system of SUS system under T-code SALE in your SUS client.
Regards,
Nikhil

Replicating GR from ECC to SUS

Hi
We are on SRM6.0 with MM-SUS classic scenario, in standrad MM-SUS scenario when ASN is created in SUS respective inbound delivery is created in ECC and GR if created agaisnt this inbound delviery GR is replicated to SUS.
If user doesn't want to do GR agaisnt inbound dleivery but against PO will the GR be replicated to ECC, if not replicated can this configurable or is it an enhacnement that is required.
with regards
Manjunath

Hello Manju,
You can use RPODDELVERY for replication of GR from ECC to SUS.
You can find more details
Re: What reports are used to send PO, Conf and Inv from MM to SUS?
Hope this helps.
Thanks
Ashutosh

Invoice and Credit Memo from ECC to SUS

Hi Gurus
Is it possible to replicate Invoice or a credit Memo from ECC to SUS if the PO was delvired to vendor through SUS.
with Regards
Manjunath

HI ,
part1 :
ERS Invoice from ECC is transfered to SUS system for display purpose to Vendor in MM-SUS scenario. IDOC "GSVERF01" is used for this purpose.
part 2 : Invoices can be created in SUS system by vendor against ASN ( Advanced Shipping Notification or purchase Order . The invoice is transfered to ECC system through XI. Message Interface for the same is "InvoiceRequest_Out" .
For reference please check
http://help.sap.com/saphelp_srm70/helpdata/en/74/344c430fab4d0bbc30996d56cc293a/frameset.htm
Regards,
Kalandi

How to pass PO customer fields from ECC to SUS ?

Hi Gurus,
We defined a customer PO field at ECC side and want to pass it to SUS and diaplay it in SUS PO, my question is, how to pass PO customer fields from ECC to SUS?
Please advise.
Thanks and best regards
jack

Hi jackytam ,
/people/yeusheng.teo/blog/2008/01/05/ordering-unit-vs-order-pricing-unit-in-srm-sus
you make get some pointers
regards,
Neelima

Unable to send an idoc from SAP R/3 to XI

Hi,
We are trying to send Z_CREMAS_SUSMM.CREMAS03 idoc from R/3 system to XI using IDOC adapter.
We have done the following steps.
On SAP R/3 system:
1.created a RFc Destination which points to the XI system using transaction SM59
2.created a port in which we have selected this RFC Destination using tansaction WE21
3.logical system for R/3 with transacion BD54
4.In WE20 transaction,we have configured the PartnerProfile by adding the IDOC message type to the outbound Parameters of XI Logical system.
On XI Sytem:
1.Created RFC destination
2.Created a Port
3.Loaded metadata
While trying to Post IDOc from SAP R/3,it is throwing an error"External segment name E2LFA1M001 cannot be interpreted"
and "Basic type CREMAS03 does not exist" on XI side.
Can anyone please provide a solution to this?

HI Jagruthi,
Have you loaded the metadata into the XI system by using IDX2?
If it is done then try to delete once and do once again.
And also delete the IDoc from IR and reimport the IDoc and activate it once again.
Regards
Goli Sridhar

Error in sender sap idoc side

Hi Experts,
            1, When the sender post idoc to PI it shows the following
              error in sender sap system.
               Error:No service for system SAPQ01 client 118 in integration directory
            2, Is it possible to post the idoc to PI With out activating the integ directory Object in PI(Integ.repoistery activated).
            3, If possible, where can i see the idoc datas in PI before activation.
Thanks

Hi Raja,
You send IDocs from system ABC to XI. In the control record of the IDoc,the SNDPOR field contains the value "SAPABC". The client of the sending system is determined by the MANDT field of the control record. The system ID and client are then used to determine a service without party of the
type (business-system/business-service):
Business system
-> Activities in the System Landscape Directory (SLD)(Create technical
system):
Create a technical system for system ABC in the SLD, and create the client for this. Do not forget to assign an "ALE logical system" (for example, "ABCCLNT123") to this technical system.
SLD (Business system):
You can now explicitly assign a business system to this client. For more details, refer to the SLD documentation.
Activities in system ABC (self-registration in the SLD):
Alternatively, you can register the system in the SLD in system ABC with Transaction RZ70. You will find detailed information about the SLD registration of systems on the SAP Service Marketplace for the
"Exchange Infrastructure" in the document "Exchange_Installation_Guide.pdf".
In system ABC, you can check your configuration with Transaction SLDCHECK.
Activities in Integration Directory (import business system from SLD):
You will find the business systems under Services Without Party in the Integration Services. In the Service menu, you will find the system identifiers, the client, and the corresponding ALE logical
system under "Objects"->"Adapter-specific identifiers". Use the Import/Update button to copy the data from the SLD, to create business systems, or to update their identifiers.
Business service
-> Activities in the Integration Builder directory:
You want to create a service without party that is not part of your system infrastructure and is therefore not maintained in the SLD. In the Integration Builder directory, you will find the "Business-Services" under Services Without Party. In the Service menu, you will find the system identifiers, the client, and the corresponding ALE logical system under "Objects"->"Adapter-specific
identifiers".
Activate the change list in Integration Directory.
In system ABC, you can restart the incorrect entry from Transaction SM58 .
Regds,
Pinangshuk.

Triggering idoc from ECC to XI

I have a idoc-xi-jms scenario where
I have a matrial master, and whenever I change sth in it idoc got to be triggered from ECC with change pointer logic.
I have changed 2 materials and when I ran the RBDMIDOC Program manually, surprisingly some 20000 idocs are triggered.
Can somebody advise me how can I avoid this typical problem if I want to send only changed materials ( i.e only 2 idocs) ??
Thanks
kumar

the change pointer program ususally accumlates all the changes ad then sends them out....
chk the tables CDHDR and CDPOS for changes usually before you trigger the RBDMIDOC program.
Also you can create use the enhancement spot to create a custom code which deletes the changes caused by other criteria than wht you are looking for.
Hope this helps!!
Cheers!!
Sidharth

Error to send a IDOC from ECC to SUS

Similar Messages

Maybe you are looking for