Error trying to access portal

I am running 9iAS R2/Portal on a Win2000 box. Both Infrastructure and Portal are running on the same machine.
It worked quite well at first but after 2 days it started showing a "Internal server error" page as a response to any and every request. The EM website is running and it shows both the infrastructure AS and the portal instance fully up and running, but still, it's impossible to even log on to Portal. The only error I see in the (thousands!) log files is something like
"[timestamp] [warn] [client IP]
[osso] Warning: Failed to decrypt OHS_ID cookie value. Bailing..."
Restarting one or both the AS instances - or the server itself - does not do any good.
Any ideas?
TIA
Andrea

Found the answer to this one, I think :
In fact, this is a client-side issue. You have to configure Internet Explorer following this instructions:
Tools -> Internet Options -> General Tab -> Settings -> check "every visit to the page"
Restart IE, then retry to access to your portal.
If it doesn't work :
Tools-> Internet Options -> go to "Security" tab, choose "Local Intranet" or "Internet", depending of the "zone" icon in the bottom-right of the IE window when you navigate on your portal pages.
Go to "Custom Level", scroll down and disable "Allow cookies that are stored on you computer".
Restart IE and retry.
It worked for me. Good luck :)
(found this tip on http://www.cronos-village.com site)
But in my case, the 9iAS test server is considered as on the "Internet" zone, so that I've a lot of problems with cookie handling with "true" sites, like oracle.com/forums :/
If you have some ideas about a generic solution ...

Similar Messages

Error while trying to access portal

Hi All,
I have installed NetWeaver CE 7.1 in my system. But when i tried to access portal with the url
http://<server name>: <port number>/irj/portal
im getting the following error
Error component failed , reason : Error while retrieving service: com.sap.portal.runtime.system.authentication.authentication Original Exception : Error while retrieving service: com.sap.portal.runtime.system.authentication.authentication
Can anyone tell me what could be the reason for this error and how to resolve this?
Please guide me........
Regards,
Padmalatha.K

HI padmalatha kontham,
If there is no any ignore option in the dilog box, just try to close it and try again. If u get that again, check the portnumber and hostname are correct or not.
there won't be any problem other than that.
example
http://<host>:<port>/irj/portal
Thanks
Suresh

Hyper-V encountered an error trying to access an object on computer ...

I'd like to share an issue which occurred during one of my recent configurations as well as the associated solution which worked for me.
While configuring Hyper-V Manager on a non-domain joined Windows 8.1 Enterprise client, to communicate with a non-domain joined Microsoft Hyper-V Server 2012R2, I received the following enjoyable message:
Hyper-V encountered an error trying to access an object on computer '.....' because the object was not found. The object might have been deleted. or you might not have permission to perform the task. Verify that the Virtual Machine Management service
on the computer is running. If the service is running, try to perform the task again by using Run as Administrator.
As it turns out I forgot to change the machine name on the Hyper-V server. It's worth noting that it's also necessary to add an entry in the client machine's HOSTS file which matches the computer name of the Hyper-V server.

Hi ITMAGE,
Thanks for your sharing and support for this forum .
It should be helpful to other people who are facing this issue .
Best Regards,
Elton JI
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Get certificate error trying to access yahoo mail, and there is no exception to bypass the error.

I am getting a certificate error trying to access https://mail.yahoo.com. Unlike most other certificate errors, there is no option for "I understand the risks" to add an exception for the page, just the following:
mail.yahoo.com uses an invalid security certificate. The certificate is not trusted because the issuer certificate is unknown. (Error code: sec_error_unknown_issuer)
I tried setting the proxy to "no proxy" under Advanced settings, as well as clearing all cookies and other cache history. Did not resolve the problem. I cannot access my email.

hello, which security program is running on your computer?

I keep getting a -42408 error trying to access the iTunes store since being in China

I keep getting a -42408 error trying to access the iTunes store since being in China, back now in the UK and the problem has stuck, help!

Danny...
access the iTunes store since being in China, back now in the UK
In case you aren't aware your credit or debit card biling information must be associated with the same country where you reside.
The Complete Guide to Using the iTunes Store | iLounge Article

Hyper-V encountered an error trying to access an object on computer 'localhost' .....- When try to install new Virtual machin in win8, 64 bit

am using windows 8, 64 bit system inside VMWARE in Ubuntu 14.04 . I have intel core i3 processor.
I want to install WIndows-7 inside windows 8 as a virtual machine. SO I tried to use "HYPER V MANAGER" with elevated privilege. wHEN I TRY , NEW->VM Machine->'after some steps'-> when I press Finish I get following error,
[Window Title]
New Virtual Machine Wizard
[Main Instruction]
Hyper-V encountered an error while configuring the network on Windows7_32bit.
[Content]
Hyper-V encountered an error trying to access an object on computer 'localhost' because the object was not found. The object might have been deleted, or you might not have permission to perform the task. Verify that the Virtual Machine Management service on the computer is running. If the service is running, try to perform the task again by using Run as Administrator.
[Close]
my understand is: "we can use Hyper v, instead of Virtual box or as VMware player". I think in windows 8, hyper v server is not installed. does that is the problem? Why do we use it ?
Actually I wanna configure Kernel Debugging over Virtualized COM port. So what can I do next ? please help me...
Note: Virtual Machine Management service is running.

Hi mrCracker,
>>am using windows 8, 64 bit system inside VMWARE in Ubuntu 14.04 .
If I understand correctly , it is nested installation .
Windows Hyper-v is bare-metal hypervisor .
Please try to install win8 on real hardware then enable hyper-v to install VM .
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Why do i get this error trying to access Hokuyo URG LiDAR on myRIO?

Hi,
I am trying to use a Hokuyo URG -04LX-UG01 LiDAR on a myRIO. I read that i should try to communicate with the device in MAX but then i got the error shown in the picture. I've tried this https://decibel.ni.com/content/docs/DOC-35698 but it wont work, and read this http://forums.ni.com/t5/LabVIEW/myRIO-VISA-Error-1073807192/td-p/2747056 but since i can see the usb in MAX i don't think i have the same problem. Can someone help me understand?
BR
Anna
Attachments:
max_lidar.png ‏172 KB

Hi Ragge,
Are you sure no other running process is trying to access the same device (COM port) as the lidar?
Could you please try resetting the MAX database: http://digital.ni.com/public.nsf/allkb/2C7480E856987FFF862573AE005AB0D9
If you plug the LiDAR into your computer instead, is it then accessible in MAX?
Best regards,
Robert Piehl-Fridqvist
Applications Engineer
National Instruments Sweden

Error message while accessing portal's desktop in wlp10, thanks

Dear All,
I created a portal based on WLP10.
I use the Weblogic Portal Administration Console for setting up the
navigation on different roles.
After I added a portal called "portal", and a desktop called,
"portalDesktop", I got an error message when I accessed to view the desktop.
The message is:
Resource /portal/mydesktop could not be resolved for locale null.
Please let me know if I overlook any configuration part.
Thanks,
It often seems that I have only typical and common things to say, in which case I join my voice or my vote to that of others. -- Jacques Derrida

yeah, i felt weird too.
I tried to connect
http://localhost:7001/WARportal/appmanager/portal/portal
but still the same error msg pops up again and again
"Resource /portal/portal could not be resolved for locale null."
And the thing is, when I first time deployed the portal desktop, it works fine. But when I've done some changes on the portal code, and published it, I found the changes are not working for the desktop accessed through appmanager, but works fine with if you launch it in workshop.
So, I delete the previous node, and resetting and deploying it again, then the error make me stucked there.
I was wondering, is it possible clean the portal and desktop information in any xml file or file folder.
Please advice, thanks
It often seems that I have only typical and common things to say, in which case I join my voice or my vote to that of others. -- Jacques Derrida

Error trying to connect Portal 7.03 with SAP R/3

Hi everyone,
We're trying to connect the SAP Portal 7.03 with any SAP R/3 transaction.
We're connecting with the option: System Management - Support - SAP Application - SAP Transaction and we select any transaction, but we're getting the next error:
Content pass of application integrator failed.
Component name: u2018com.sap.portal.appintegrator.sap.transactionu2019,
Top layer: u2018Transaction/DragAndRelateLlayeru2019,
Producer ID (FPN): 'null',
System Alias: u2018SAP_QASu2019
Application URL u2018:///sap (ZT00T1NPU3VJN2p1VHNHUWs2NHIyUIFnLS1ZRypKSTNxQ3ZqeG pWWU1Zc0s3TGhRLS0=) /bc/gui/sap/its/webguiu2019 is not valid! please check the protocol and host entries for system 'SAP_QAS'.
Does anybody knows why we're getting this?
We appreciate your help!
Edited by: vemontoya on Feb 6, 2012 5:48 PM

Hi,
Unfortunately the status - "System waiting for something" is very vague. There could be a lot of things that you might have to look into.
1. Are you able to log into the ECC system? If yes, you may want to activate the webgui related services. If you are running it for the first time, you might have to run the program - SIAC_PUBLISH_ALL_INTERNAL
2. you may also want to look at the user with which you log in - does the user have authorization to run the transaction.
3. Check your system object properties if all the system properties - client, port etc. are specified correctly.
In short, there could be a lot of possibilities of what the problem could be, although the real problem may be really small. If you can post something more specific, I will be able to help you.
Hope this helps
Prathamesh

Trying to access Portal Hot contributions

I click on one of the hot contributions. The screen comes back with a login screen. I login, and then get a blank white screen with done at the bottom. When I refresh the screen, I get the following error: ORA-20001: The session cookie is corrupt - unable to obtain session information. Please close your browser and reconnect.
ORA-06512: at "OPSTUDIO.WPG_SESSION", line 112
ORA-06512: at line 9

Found the answer to this one, I think :
In fact, this is a client-side issue. You have to configure Internet Explorer following this instructions:
Tools -> Internet Options -> General Tab -> Settings -> check "every visit to the page"
Restart IE, then retry to access to your portal.
If it doesn't work :
Tools-> Internet Options -> go to "Security" tab, choose "Local Intranet" or "Internet", depending of the "zone" icon in the bottom-right of the IE window when you navigate on your portal pages.
Go to "Custom Level", scroll down and disable "Allow cookies that are stored on you computer".
Restart IE and retry.
It worked for me. Good luck :)
(found this tip on http://www.cronos-village.com site)
But in my case, the 9iAS test server is considered as on the "Internet" zone, so that I've a lot of problems with cookie handling with "true" sites, like oracle.com/forums :/
If you have some ideas about a generic solution ...

Error trying to access Site Settings on sub-sites after migration from WSS 3.0 to Foundation 2010

I have migrated a WSS 3.0 database over to SP Foundation 2010. I can browse all the sites just fine. I can successfully get to Site Actions, Site Settings on the main site(parent). However, when I try to access Site Actions, Site Settings
from any of the subsites, I get the error below. It has been years since we setup the old WSS 3.0 site. I cannot remember what modifications may have been made that could help determine what is causing this. Thanks
Error
File Not Found.
Troubleshoot issues with Microsoft SharePoint Foundation.
Correlation ID: 5096e4a9-5dc2-4fc0-b9bd-c8f758f8ed23
Date and Time: 9/5/2014 2:22:35 PM
In other words
this one works >> http://poly-2008-svr1/_layouts/settings.aspx
this one doesn't work >> http://poly-2008-svr1/11392/_layouts/settings.aspx

Hi Poly,
I recommend to check if the Alternate Access Mapping is correct for the web application where the site exists in Central Administration.
To narrow the issue scope, I recommend to create a new subsite to see if the issue still occurs.
Please also check the ULS log to get the detailed error message.
For SharePoint 2010, by default, ULS log is at C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS.
You can check the ULS log by the methods here:
http://blogs.msdn.com/b/opal/archive/2009/12/22/uls-viewer-for-sharepoint-2010-troubleshooting.aspx
http://msdn.microsoft.com/en-us/library/gg193966(v=office.14).aspx
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

Cast error trying to access tree binding

JDeveloper version 11.1.2.1.0
java.util.ArrayList cannot be cast to oracle.jbo.uicli.binding.JUCtrlHierBinding
Hi All
I'm using code from ADF Code Corner (http://www.oracle.com/technetwork/developer-tools/adf/learnmore/78-man-expanding-trees-treetables-354775.pdf) to try and programmatically set the tree node disclosure level when the page is initially rendered. The tree's DisclosedRowKeys property is set to #{viewScope.FieldPickerHandler.newDisclosedTreeKeys}. The code for the handler method that's causing the problem is below. First you can see that I have commented out Frank's original code on lines 5, 6 & 8 because for some reason this did not find the tree component (always returned null). So instead I have set the tree component's Binding property to #{viewScope.FieldPickerHandler.jsfTree} to make the component instance available in the handler and this seems to work. However when the code hits line 16 I get the class cast exception at the head of this post.
One significant variation from the Code Corner example is that my tree is based on a POJO model that is populated programmatically from a VO (as posted by Lucas Jellema http://technology.amis.nl/blog/2116/much-faster-adf-faces-tree-using-a-pojo-as-cache-based-on-read-only-view-object-showing-proper-leaf-nodes-again) hence my root node set, and each node's child set, is declared as "List<FieldPickerNode> nodes = new ArrayList<FieldPickerNode>();".
Does the way the POJO tree is constructed make it incompatible with the Code Corner node expansion approach? Can anyone suggest how I can modify my handler bean code to work with the POJO tree?
Thanks
Adrian
PS The tree's Value property is set to #{viewScope.FieldPickerHandler.treemodel} where treemodel is a managed property of the bean - I guess this mean my tree is not ADF-bound?
1 public RowKeySetImpl getNewDisclosedTreeKeys() {
2 if (newDisclosedTreeKeys == null) {
3 newDisclosedTreeKeys = new RowKeySetImpl();
4
5// FacesContext fctx = FacesContext.getCurrentInstance();
6// UIViewRoot root = fctx.getViewRoot();
7 //lookup thetree component by its component ID
8// RichTree tree = (RichTree)root.findComponent("t1");
9 //if tree is found ....
10 if (jsfTree != null) {
11 //get the collection model to access the ADF binding layer for
12 //the tree binding used. Note that for this sample the bindings
13 //used by the tree is different from the binding used for the tree
14 //table
15 CollectionModel model = (CollectionModel)jsfTree.getValue();
16 JUCtrlHierBinding treeBinding = (JUCtrlHierBinding)model.getWrappedData();
Edited by: blackadr on 03-Nov-2011 17:56

Hello Frank et al
Still struggling valiantly to create a POJO tree that uses the ADF binding layer. Rather than referencing the treemodel directly from the component I have now added a method to my model class that returns the set of root nodes as an ArrayList:
public List<FieldPickerNode> getRootNodes() {
if (treemodel == null) {
treemodel = initializeTreeModel();
return rootNodes;
and my FieldPickerNode class also now has a method to return its children as an ArrayList. The model class is managed in view scope. So I drag the rootNodes collection from the Data Controls panel into my panel collection and get the option to create it as an ADF tree. Great. I add the method to get the children as an accessor and the bindings end up looking like this:
<iterator Binds="root" RangeSize="25" DataControl="FieldPickerModel" id="FieldPickerModelIterator"/>
<accessorIterator MasterBinding="FieldPickerModelIterator" Binds="rootNodes" RangeSize="25"
DataControl="FieldPickerModel" BeanClass="view.picker.FieldPickerNode" id="rootNodesIterator"/>
<tree IterBinding="rootNodesIterator" id="rootNodes">
<nodeDefinition DefName="view.picker.FieldPickerNode" Name="rootNodes0">
<AttrNames>
<Item Value="nodeID"/>
</AttrNames>
<Accessors>
<Item Value="children"/>
</Accessors>
</nodeDefinition>
</tree>
The tree component looks like this:
<af:tree value="#{bindings.rootNodes.treeModel}" var="node"
selectionListener="#{bindings.rootNodes.treeModel.makeCurrent}"
rowSelection="single" id="t1">
<f:facet name="nodeStamp">
<af:outputText value="#{node}" id="ot1"/>
</f:facet>
</af:tree>
To my untrained eye this all seems to look ok but when I run the page I get two null pointer errors in the browser and a couple thousand lines of repeated stack in the log viewer. In the early stages of the log there's a message "<BeanHandler> <getStructure> Failed to build StructureDefinition for : view.picker.FieldPickerModel" which I feel can't be good but is in the depths of the framework so difficult for me to debug (am in the process of requesting the ADF source). I've shown the message below with a few lines of context either side.
Can you think of any other lines of enquiry I can follow to progress this? For example are there other attributes or methods that I need to add to my tree model classes in order to support the ADF binding?
For background, the reason I started pursuing the POJO tree in the first place was because for large hierarchies the VO driven tree is unacceptably slow given that it fires SQL for each individual node disclosure. Linking the tree model directly to the component demonstrates just how quick the POJO approach is but I would like to have it go through the ADF bindings so I have more scope to customise the tree behaviour.
Any pointers or help you (or anyone) can give would be very much appreciated.
Adrian
<ADFLogger> <end> Refreshing binding container
<DCExecutableBinding> <refreshIfNeeded> [40] DCExecutableBinding.refreshIfNeeded(338) Invoke refresh for :rootNodesIterator
<DCIteratorBinding> <refresh> [41] DCIteratorBinding.refresh(4438) Executing and syncing on IteratorBinding.refresh from :rootNodesIterator
<ADFLogger> <begin> Instantiate Data Control
<BeanHandler> <getStructure> Failed to build StructureDefinition for : view.picker.FieldPickerModel
<MOMParserMDS> <parse> [42] MOMParserMDS.parse(226) No XML file /view/picker/picker.xml for metaobject view.picker.picker
<MOMParserMDS> <parse> [43] MOMParserMDS.parse(228) MDS error (MetadataNotFoundException): MDS-00013: no metadata found for metadata object "/view/picker/picker.xml"
<DefinitionManager> <loadParent> [44] DefinitionManager.loadParent(1508) Cannot Load parent Package : view.picker.picker
<DefinitionManager> <loadParent> [45] DefinitionManager.loadParent(1509) Business Object Browsing may be unavailable

Error trying to access photos on mySql server.

I have a hosting account on godaddy with a with a domain named charliegooddog.org. I have a simple photo gallery that uses PHP to access photos using a MySQL database. The app works fine on my machine. I created a MySQL database with the same table as on my machine. I uploaded my photo gallery to the domain on godaddy and updated the file that's used to pass on the hostname, database, username, and password info.
When I bring up the photo gallery I get this error:
[RPC Fault faultString="Security error accessing url" faultCode="Channel.Security.Error" faultDetail="Destination: DefaultHTTP"]
    at mx.rpc::AbstractInvoker/http://www.adobe.com/2006/flex/mx/internal::faultHandler()[C:\autobuild\3.2.0\frameworks\p rojects\rpc\src\mx\rpc\AbstractInvoker.as:220]
    at mx.rpc::Responder/fault()[C:\autobuild\3.2.0\frameworks\projects\rpc\src\mx\rpc\Responder .as:53]
    at mx.rpc::AsyncRequest/fault()[C:\autobuild\3.2.0\frameworks\projects\rpc\src\mx\rpc\AsyncR equest.as:103]
    at DirectHTTPMessageResponder/securityErrorHandler()[C:\autobuild\3.2.0\frameworks\projects\ rpc\src\mx\messaging\channels\DirectHTTPChannel.as:389]
    at flash.events::EventDispatcher/dispatchEventFunction()
    at flash.events::EventDispatcher/dispatchEvent()
    at flash.net::URLLoader/redirectEvent()
Any ideas?

Hi,
Flash player is surrounded with sand box security and will not allow untrusted/unknown domains in to tyour application.
This is not an error or bad side of flex applications, its for your app security..
Solution: You can either use a crossdomain.xml file in your application.
In crossdomain.xml specify the following
<allowdomain>your domain</allowdomain>
OR
you can also use the following syntax in your mxml code..
security.allowdomain(http://photosdomain");
thats it..

Error trying to access to WorkFlowManager

Hello,
I'm novice in WorkFlow issues but I've achieved to install WorkFlow Builder (2.6) in my computer extract from CDs of Oracle DataBase 9i.
The problems arrieved when I try to connect to the WorkFlow Manager through Internet Explorer. As I showed in other topics I connect to the url http://<ip>:7778/servlets/em/oam/wfm/wfmLogin$tns_address=<ip>
Then I get a welcome page to Oracle WorkFlow Manager with a login. But when I try to access using owf_mgr user and his password, I obtain an error:
I/O Exception: SO Exception was generated
Could someone help me?
Thanks,
Danny

Hello,
Looks as if there is a database connection issue. The host port sid values may not be correct, hence the errors.
Try this:
1. Remove the tns_admin=... from the URL and launch the web page
2. The workflow manager login console appears with username, password and connection information
3. Provide the workflow manager schema username and password. In the connect string information provide the database details in the <host>:<port>:<sid> format.
Hopefully this should work.
Cheers,
Raja

Help! Rec'd error trying to access itunes store...

I rec'd the following error and need help on resolving-
when I clicked on itunes store, the following error appeared:
external protocol request
An external application must be launched to handle itms: links
itms://ax.phobos.apple.edgesuite.net/webobjects/mzstore.woa/wa/viewtop? id=37&popld=4&ign-mscacho=1

FYI.. This is not related to Leopard, because I have not upgraded yet, and I have Itunes 7.5
thanks

Error trying to access portal

Similar Messages

Maybe you are looking for