Error trying to access Site Settings on sub-sites after migration from WSS 3.0 to Foundation 2010

I have migrated a WSS 3.0 database over to SP Foundation 2010. I can browse all the sites just fine. I can successfully get to Site Actions, Site Settings on the main site(parent). However, when I try to access Site Actions, Site Settings
from any of the subsites, I get the error below. It has been years since we setup the old WSS 3.0 site. I cannot remember what modifications may have been made that could help determine what is causing this. Thanks
Error
File Not Found.
Troubleshoot issues with Microsoft SharePoint Foundation.
Correlation ID: 5096e4a9-5dc2-4fc0-b9bd-c8f758f8ed23
Date and Time: 9/5/2014 2:22:35 PM
In other words
this one works >> http://poly-2008-svr1/_layouts/settings.aspx
this one doesn't work >> http://poly-2008-svr1/11392/_layouts/settings.aspx

Hi Poly,
I recommend to check if the Alternate Access Mapping is correct for the web application where the site exists in Central Administration.
To narrow the issue scope, I recommend to create a new subsite to see if the issue still occurs.
Please also check the ULS log to get the detailed error message.
For SharePoint 2010, by default, ULS log is at C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS.
You can check the ULS log by the methods here:
http://blogs.msdn.com/b/opal/archive/2009/12/22/uls-viewer-for-sharepoint-2010-troubleshooting.aspx
http://msdn.microsoft.com/en-us/library/gg193966(v=office.14).aspx
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

Similar Messages

Get certificate error trying to access yahoo mail, and there is no exception to bypass the error.

I am getting a certificate error trying to access https://mail.yahoo.com. Unlike most other certificate errors, there is no option for "I understand the risks" to add an exception for the page, just the following:
mail.yahoo.com uses an invalid security certificate. The certificate is not trusted because the issuer certificate is unknown. (Error code: sec_error_unknown_issuer)
I tried setting the proxy to "no proxy" under Advanced settings, as well as clearing all cookies and other cache history. Did not resolve the problem. I cannot access my email.

hello, which security program is running on your computer?

Hyper-V encountered an error trying to access an object on computer ...

I'd like to share an issue which occurred during one of my recent configurations as well as the associated solution which worked for me.
While configuring Hyper-V Manager on a non-domain joined Windows 8.1 Enterprise client, to communicate with a non-domain joined Microsoft Hyper-V Server 2012R2, I received the following enjoyable message:
Hyper-V encountered an error trying to access an object on computer '.....' because the object was not found. The object might have been deleted. or you might not have permission to perform the task. Verify that the Virtual Machine Management service
on the computer is running. If the service is running, try to perform the task again by using Run as Administrator.
As it turns out I forgot to change the machine name on the Hyper-V server. It's worth noting that it's also necessary to add an entry in the client machine's HOSTS file which matches the computer name of the Hyper-V server.

Hi ITMAGE,
Thanks for your sharing and support for this forum .
It should be helpful to other people who are facing this issue .
Best Regards,
Elton JI
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

I keep getting a -42408 error trying to access the iTunes store since being in China

I keep getting a -42408 error trying to access the iTunes store since being in China, back now in the UK and the problem has stuck, help!

Danny...
access the iTunes store since being in China, back now in the UK
In case you aren't aware your credit or debit card biling information must be associated with the same country where you reside.
The Complete Guide to Using the iTunes Store | iLounge Article

Hyper-V encountered an error trying to access an object on computer 'localhost' .....- When try to install new Virtual machin in win8, 64 bit

am using windows 8, 64 bit system inside VMWARE in Ubuntu 14.04 . I have intel core i3 processor.
I want to install WIndows-7 inside windows 8 as a virtual machine. SO I tried to use "HYPER V MANAGER" with elevated privilege. wHEN I TRY , NEW->VM Machine->'after some steps'-> when I press Finish I get following error,
[Window Title]
New Virtual Machine Wizard
[Main Instruction]
Hyper-V encountered an error while configuring the network on Windows7_32bit.
[Content]
Hyper-V encountered an error trying to access an object on computer 'localhost' because the object was not found. The object might have been deleted, or you might not have permission to perform the task. Verify that the Virtual Machine Management service on the computer is running. If the service is running, try to perform the task again by using Run as Administrator.
[Close]
my understand is: "we can use Hyper v, instead of Virtual box or as VMware player". I think in windows 8, hyper v server is not installed. does that is the problem? Why do we use it ?
Actually I wanna configure Kernel Debugging over Virtualized COM port. So what can I do next ? please help me...
Note: Virtual Machine Management service is running.

Hi mrCracker,
>>am using windows 8, 64 bit system inside VMWARE in Ubuntu 14.04 .
If I understand correctly , it is nested installation .
Windows Hyper-v is bare-metal hypervisor .
Please try to install win8 on real hardware then enable hyper-v to install VM .
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How to deploy site collection has sub sites to other environments

Hello everybody,
I have a site collection SharePoint online.
In the site, haven 3 sub sites.
Now, i want to deploy this site to other environment,
How can i do that?
I am trying save site as template but that is not support sub site.
Thanks and best Regards,
QuyenPV

Hi,
According to your post, my understanding is that you want to backup SharePoint online site to another environment.
For SharePoint server, we can use the PowerShell to backup the site collection with all the subsites.
However, per the technet article below, there is no backup and restore cmdlets for SharePoint online to backup and restore.
http://technet.microsoft.com/en-us/library/fp161374.aspx
You can use the third-party tool to achieve this scenario.
http://blogs.technet.com/b/akieft/archive/2012/01/09/restore-options-in-sharepoint-online.aspx
As this is the forum for SharePoint server on-premise, I’m not familiar with the SharePoint online, for this issue, I recommend you can post a new question in the forum for Office 365/SharePoint online.
http://community.office365.com/en-us/forums/154.aspx
More experts will assist you, then you will get more information relation to SharePoint Online.
Thank you for your understanding and support.
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Site collections, or sub-sites, in SharePoint Online?

We have an established SharePoint 2010 intranet portal, which has many and various team sub-sites. These sub-sites are created on request - sometimes it's because one of our locations wants their own little area to share documents, or it might be for
a company-wide project or initiative.
We are now slowly moving over to SharePoint Online. Mainly, it's to replace Box and Dropbox (which some teams use), and allow our staff to share files externally if needed. Nothing special, just a document library. More often than not,
each site will have its own unique permissions.
Now, our SharePoint 2010 site is one large site collection (wasn't my idea). As an administrator, that makes my life quite easy as it's one content database, one set of content types, etc. But, with SharePoint Online, I don't need to think about
content databases, and won't be using custom content types with these sites.
So, I'm a bit stuck. My options, as I see it, are:
One large site collection (pretty much a no-go as these shared files might get quite large)
One site collection for each request, no questions asked (which might lead to hundreds of site collections)
Create a site collection for each office location, and then a sub-site for each team in that location (as requested) - and also create a site collection for each company-wide function, and create a sub-site for each project within that function
Can anyone give any pointers towards the "best" option to use here?

it always depends on different things.
One of the key elements I always use to decide site vs site collection is security boundary.
If the target site has a high level of confidentional information, I prefer a dedicated Site collection.
If it is just a smaller team (or broader team) to share info with you can easy use sub sites.
Looking at the boundary & limits is also wise to do. (like the 5000 item treshold in a view on a document library)
A document library should in practice not really be used for multiple teams, however it is possible. A lot of dl's within a site is also not that intuitive for a lot of end-users.
A office location can be use, however, a lot of work is done across office locations. (now or in the future)
One site collection per each request is not by definition a bad thiing... however please be in control (governance) of the owners. For example let a site collection owner every x months acknowledge that he/she still needs that site collection or that it
can be removed.
One Large site collection is asking for trouble in the end. however for a publishing intranet only it can be good.
Good luck with your choice for your environment!
You can also contact me if you want to discuss more on this topic.
Michiel Hamers www.SharePointman.nl Don't hesitate to contact me for a SharePoint/O365 question.

Can only access emails through OWA after migration from exchange 2007 to 2013

can only access emails through OWA after migration from exchange 2007 to 2013, in other words unable to access mails through outlook or from other Applications services.
needed RCA ... plz help..

Hi,
From your description, you can send and receive messages only when you use OWA after migration from Exchange 2007 to Exchange 2013. If I have misunderstood your concern, please let me know.
In your case, I recommend you create a new test mailbox in your Exchange 2013 and check if you can send and receive messages on Outlook. If yes, it is recommended to create a new profile to solve this issue.
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

NQS ERROR:14025 NO FACT TABLE EXISTS -after migrating from 10g to 11g

NQS ERROR:14025 NO FACT TABLE EXISTS AT THE REQUESTED LEVEL OF DETAIL in all the reports after migrating from 10g to 11g ...
then we applied the patch (One-off Patch for Bug: 11850704) for the error <<NQS ERROR:14025 NO FACT TABLE EXISTS AT THE REQUESTED LEVEL OF DETAIL>>
But after applying the above the above patch we are still getting the same error.
but in the above patch instructions file - Post deployment instructions to create the Variable
Post Install Instructions:
- To revert to the 10g navigator behavior for handling conforming dimensions,
you must set the following session variable via an init block in the RPD:
NO_FORCE_TO_DETAIL_BIN=1
The default value for the above variable is 0.
- Restart all servers (Admin Server and all Managed Server(s))
but we didn’t find the process to create the specified variable and Initialization block in the RPD
Can you please suggest us how to go further.
Our questions are:

Hi
Refer the below thread.
obiee 11g non-conforming dimensions and nQSError 14025
Might be help you/
Thanks,
satya

Why do i get this error trying to access Hokuyo URG LiDAR on myRIO?

Hi,
I am trying to use a Hokuyo URG -04LX-UG01 LiDAR on a myRIO. I read that i should try to communicate with the device in MAX but then i got the error shown in the picture. I've tried this https://decibel.ni.com/content/docs/DOC-35698 but it wont work, and read this http://forums.ni.com/t5/LabVIEW/myRIO-VISA-Error-1073807192/td-p/2747056 but since i can see the usb in MAX i don't think i have the same problem. Can someone help me understand?
BR
Anna
Attachments:
max_lidar.png ‏172 KB

Hi Ragge,
Are you sure no other running process is trying to access the same device (COM port) as the lidar?
Could you please try resetting the MAX database: http://digital.ni.com/public.nsf/allkb/2C7480E856987FFF862573AE005AB0D9
If you plug the LiDAR into your computer instead, is it then accessible in MAX?
Best regards,
Robert Piehl-Fridqvist
Applications Engineer
National Instruments Sweden

Error trying to access to WorkFlowManager

Hello,
I'm novice in WorkFlow issues but I've achieved to install WorkFlow Builder (2.6) in my computer extract from CDs of Oracle DataBase 9i.
The problems arrieved when I try to connect to the WorkFlow Manager through Internet Explorer. As I showed in other topics I connect to the url http://<ip>:7778/servlets/em/oam/wfm/wfmLogin$tns_address=<ip>
Then I get a welcome page to Oracle WorkFlow Manager with a login. But when I try to access using owf_mgr user and his password, I obtain an error:
I/O Exception: SO Exception was generated
Could someone help me?
Thanks,
Danny

Hello,
Looks as if there is a database connection issue. The host port sid values may not be correct, hence the errors.
Try this:
1. Remove the tns_admin=... from the URL and launch the web page
2. The workflow manager login console appears with username, password and connection information
3. Provide the workflow manager schema username and password. In the connect string information provide the database details in the <host>:<port>:<sid> format.
Hopefully this should work.
Cheers,
Raja

Move Documents from a site to a sub site with SharePoint on Office 365

Good Morning,
I am trying to configure my Content Organizer Rules to send documents uploaded in one site (e.g. contoso.sharepoint.com/DropOffLibrary) to a library in a sub site (e.g. contoso.sharepoint.com/testSite/destintionLibrary). I have turned on the Content Organizer
for both sites, checked the setting that "<label for="ctl00_PlaceHolderMain_enableCrossRoutingSection_crossRoutingCheckBox">Allow rules to specify another site as a target location", and </label>ensured the content type was
on the Drop Off Library and the destination library. The Content Type was a custom type that included custom columns.
I created a rule based upon one of those columns that sent the document to the correct library (site) based upon the choice made. The column did not accept any value except the choices provided. When I try to enter the destination for the document,
the sub-sites are not listed as options to select and neither are the libraries contained within them. When I enter in the URL for the targeted library, the message "A valid target path must be selected." appears. If I create the same rule,
targeting the local library, it works.
Any ideas on why this is not working for me?

Hi Zac,
In order to route documents from one site to another, please make sure you have set up a send to location in Records Management in SharePoint admin center for the destination site.
For more information, you can refer to the blog;
http://office.microsoft.com/en-in/sharepoint-server-help/implement-records-management-HA102893868.aspx
https://social.technet.microsoft.com/Forums/office/en-US/239374eb-f617-48eb-b2c6-6aefaa810145/content-organizer-rule-a-valid-target-path-must-be-selected?forum=sharepointgeneralprevious
http://office.microsoft.com/en-in/sharepoint-server-help/create-content-organizer-rules-to-route-documents-HA102772939.aspx
Best Regards,
Eric
Eric Tao
TechNet Community Support

Creation of dynamic site collection and sub-sites

We are having an enterprise system where organization wide operations are maintained. Recently we decided to provide collaboration features for each operation maintained in the system using SharePoint 2013, since that enterprise system did not provide
any social/collaboration features.
Assumptions/constraints -
1. Every year 2500 operations are created
2. Each operation can have documents and other content scaling upto 5 GB.
3. Only SharePoint provider hosted apps are allowed to build the solution
For seamless integration, we are creating an automation component which will a SharePoint provision site automatically when an Operation is created in the enterprise system (we will get the trigger through web services)
Proposed solution -
After going through
Software boundaries and limits for SharePoint 2013, I'm thinking of proposing this architecture -
1. A windows service will be created which will accept the trigger to create a site and take care of provisioning the entire site
2. A maximum of 700 sites will be created per site collection (based on the size calculations and keeping some buffer)
3. Once a site collection hits 700 sub-sites, a new site collection is automatically created for provisioning the new sites
4. Provision the apps and add them to site pages using powershell/CSOM
Kindly let me know if this approach is effective or any major road-blocks we need to take care of in this.
NLV - MCTS - Blog -
Twitter - In

Hi Margriet,
We are looking at the SharePoint 2013 limitations and trying to devise the best possible solution. We are open to create multiple content databases for multiple site collections or with single contentdatabase having multiple site collections (which doesn't
look like feasible). So it is a matter of deciding which will best suit this scenario.
NLV - MCTS - Blog -
Twitter - In

I'm trying to access a Mac OSX xserve's shared folder from a windows xp pc

So I'm trying to access the Shared Folders on a Mac OSX Xserve Server. this server does not provide authentication or home folders, etc. Pretty much using it for network storage. I've been able to successfuly connect to the folders using Windows 7, but the Windows XP computers will not connect. I keep getting a "You might not have permission to this folder" etc dialog box popup.
This is my method of connection. Start -> Run -> \\1.1.1.1 -> Enter. I see the folders. I double click on the folder icon to access the folder, i get a login dialog box. On the Windows 7 machine I typed in my LOCAL MACHINE'S username and password. Success! On the XP machine, I do the exact same thing and receive the error.
please Help!
the Macs on my network (96% of users) have absolutely no problem connecting to the server using ⌘K in Finder

Try mapping the drive as normal and then see what happens.
\\1.1.1.1\Share Name

Images of SharePoint site is not getting rendered after migration

We did migration of sharepoint 2007 site to different server to SharePoint 2010.
After migration site is functioning normally but not showing images on the pages, instead of image cross sign is appearing on the page.
Can someone please help. I have copied images of old server to new server in 14 hive Templates\Images folder.
I have checked properties of image, there Type,Size,Modified,Created these attributes value is "Not Available"
When I tried to open the image using URL on browser then Runtime Error Description: An application error occurred on the server. occuerd.
Please let me know what needs to check to resolve the same.
Rushikesh_Khadtare

Path of the image is http://servername/_layouts/images/folder.gif
now images like folder icon are getting rendered but not showing theme, (page's background is clean white).
Even though site is restored on SharePoint 2010 still it gets rendered like MOSS look and feel.
Rushikesh_Khadtare

Error trying to access Site Settings on sub-sites after migration from WSS 3.0 to Foundation 2010

Similar Messages

Maybe you are looking for