Error trying to import application and apex objects

Hi friends:
I was using the Oracle Apex Demo Site to evaluated Oracle application Server.
I was amazed with its functionality, so I decide to download and installed on my server.
I want to continue evaluating the Apex functionallity and for that, I want to export tha application and objects I setuo on Oracle's Apex Site.
I did with no problem.
After installed the Apex on my server, I inport the workspace.
But now I want to import the apex objects and the application 8mostly pages) my apex admin page give me an unrecognized errors for me.
1. If I try to import the objects (tables, preocedures, etc. and data) it sends me the error: unreconized lines on the file, please remove the lines.
2. If I try to import the application objects (pages, etc.) it sends me the folloeing error: the file you are trying to import is not a valid apllication express export file.
It is kind of courious because I just exported from Oracle Apex Site.
Any hel please.
Abdel Miranda
AEMS Global Group
Panama

The other issue I forgot to mentioned is: when I install a new database to use it just with Apex, I leave the character set as WE8MSWIN1252.
I change my apex dads file to setup the AL32UTF8.
I don't know if these is the problem between the exported file from Oracles Apex Site (which has a UTF-8 character set setuup) and my apex installation with Apex character set as AL32UTF8 and Oracle 9i Release 2 with WE8MSWIN1252 character set settup.
Any help please.
Abdel Miranda
AEMS Global Group
Panama

Similar Messages

  • I received an error trying to migrate from Outlook 2010 to Thunderbird on Windows 7 and my folders didn't migrate over. I get an error trying to import setting

    I have windows 7 professional running MS office 2010. I have 3 email accounts that I send and receive mail. these are all IMAP accounts. I installed Thunderbird and tried to import everything and the contacts import ok (except for my icloud contacts) but there is an error when importing the settings. The mail seems to import fine however I can only access mail for one of the email accounts. The other two just show a folder and no subfolders in the mail tree iin the left pane.
    When I try to look up the accounts, I only see one account configured, the other ones are not there

    duplicate: [https://support.mozilla.org/en-US/questions/1025469?esab=a&s=&r=1&as=s]

  • Error while exporting - importing application

    Hi All
    I was trying to export my apex.oracle.com app and was importing it to my local db installation environment. Encountered with an error:
    *1 error has occurred*
         *NOT COMPATIBLE (Your export may contain calls not supported by your application version.)*I found that in my local environment, some features were missing like page of Type "Master-Detail" was not there while creating a page in my local instance. (My app is not using any mater-detail page, but it may be using some features which are missing in my local version). Want to know about the following:
    1. The APEX 3.2 (apex.oracle.com) DB version so that I can upgrade my DB instance version.
    2. Is the error telling about the incompatible application version or the DB version? How can it be addressed?
    Thanks
    Bhavesh

    Hello Bhavesh,
    >> That means my env is the newer one, still it is not compatible with the app created on an earlier version. Not sure why?
    The compatibility issue you encountered is about the APEX version and NOT the database version. The same APEX version can be installed on different database versions, starting with 9.2.0.3 or later.
    As each new APEX version adds new features, which manifest in the metadata table structure (among others), you can’t install an application from an advanced APEX version on an earlier APEX version.
    The version on apex.oracle.com is 3.2, while the default APEX installation on a new 11g database is 3.0.1. As such, if no specific upgrade were done to your local APEX instance, you won’t be able to import applications from apex.oracle.com.
    As was suggested, the only feasible solution is to upgrade the local APEX instance to the version on apex.oracle.com.
    Regards,
    Arie.
    Please remember to mark appropriate posts as correct/helpful. For the long run, it will benefit us all.

  • We would like an request with error is not imported over and over again.

    We have an periodically sheduled job which imports all released requests(queue). We would like that request with error is not imported over and over again.
    How to achieve that?

    Hi,
    Please do run the import job for transport in STMS only as described in SAP Note below:
    https://service.sap.com/sap/support/notes/398589
    The periodic sadly can only be done for "import all" & not "import single".
    However, you can try the following unconditional modes:
    http://help.sap.com/saphelp_nw70/helpdata/EN/3d/ad5b814ebc11d182bf0000e829fbfe/frameset.htm
    - Regards, Dibya

  • Error Trying to Sync Audio and MIDI - Please Help!

    Hey everyone, I know this is a fairly common problem, and I've tried following the Logic Help and manual, but it hasn't solved it.
    Last night, I was recording and mixing with my MOTU 828mkII into my Powerbook G4 running Logic Pro 6.4, and everything was working perfectly. Today, when I opened up Logic again to work on mixing the song I recorded last night, after not having changed a single preference anywhere, something bizarre happened. When I clicked the play button, the song began playing, but no sound came out, except for a high-pitched digital howling sound, and after about 5 seconds, an error message came up saying, "Error Trying to Sync Audio and MIDI." I tried other song files I'd recorded months ago, and even with brand new song files, and the same exact problem occurred!
    Apparently, it's a discrepancy in the sample rates between my MOTU and Logic? But both have been set to 44.1 for months, and I haven't changed anything. The Logic Help said to change the Sync Mode to MTC Continuous (which I believe it was already set to) or MTC Trigger/ASD (which didn't help).
    I even tried re-installing Logic altogether, and changing the sample rates both on my MOTU and Logic to 48 and then back to 44.1, and nothing works.
    Please help me! What should I do?
    Thanks very much,
    TB

    I suffered from this problem, and it was particularly frustrating to me since I was not even using MIDI, or so I thought. The "Error Trying to Sync Audio and MIDI" message seemed to crop up just as I was ready to print a final mix.
    I did some research and learned that the Logic automation is actually MIDI data, furthermore, I learned that The sample accurate automation feature in Logic Audio results in randomly sized audio buffers being passed to plug-ins.
    My solution?
    Turn OFF "sample accurate automation" in the menu Logic Pro / Preferences / Audio...
    The automation is very accurate even with this option disabled.

  • I tried to import photos and then canceled it during.  Now i can't see where it's importing and it wont let me exit iPhoto.  How do i cancel import and exit?

    I tried to import photos and then canceled it during.  Now i can't see where it's importing and it wont let me exit iPhoto.  How do i locate or cancel import and exit?  I haven't been able to update anything on my computer because of this.

  • I am trying to import video and the audio doesn't upload with the video. Help.

    I am trying to import video and the audio doesn't upload with the video. Help.
    I upgraded to iMovie 11 because the previous version wouldn't read the type of video I was importing (VOB).  The video imports but not the audio, what do I do?

    What are you capturing from?  You may not hear the auido as it's captured but it will be there.  After it's captured can you see the audio waveforms? Do the audio meters move when you play the clip?  If so then go to "View" then "Audio Playback"  and set it to 'Built-in Output" if you're monitoring audio through the computer.

  • Trying to import photos and copy as DNG. Nothing will upload though. Permissions are all accurate, saving to the right profile, etc. Nothing has changed on my computer but it will not let me import new pictures. Also, updated the software and some images

    trying to import photos and copy as DNG. Nothing will upload though. Permissions are all accurate, saving to the right profile, etc. Nothing has changed on my computer but it will not let me import new pictures. Also, updated the software and some images say "preview cannot be seen" and some don't. And when I try to import and I hit "new photos" it's all the photos on my card. My brain is about to explode.

    It said something similar where the thumbnails were supposed to be.
    Just got the newest edition of LR, 4.4
    4.4 is not the newest edition of LR
    We don't want to know that it said "something similar", we want to know the exact wording. In fact, you ought to state the exact problem you are having, in detail, instead of saying you are having the same problem.

  • Page Not Found error trying to import a large application into ApEx XE DB

    I have an ApEx application that I'm trying to import from a Standard DB into Express Edition. I have 2 separate installs of ApEx both on XE and I'm getting the same problem on both.
    PROBLEM:
    After I import the application I get the error: PAGE NOT FOUND standard error.
    The import file is 4.8 Mbytes. When I view the import repository it shows increments of the file being loaded.
    for e.g. First time 3 MBytes are loaded before the error is shown
    Second time 3.2MBytes are loaded then it falls over again.
    any suggestions?
    Smaller sized apps load up with no problems.
    If it weren't for the sad state of the internal XE web server I could at least have a look at the HTTP logs. But alas someone in their wisdom had the bright idea to hide the webserver away in the bowels of the XE database.
    thanks in advance for any help
    Paul P

    Paul,
    You can try the suggestion in this thread on the XE forum:
    Re: Problem with importing HTML DB applications
    It also shows how to turn on logging in the XE web server.

  • It generates an error when trying to import a version apex 4.0 production.

    It generates an error when trying to import a version 4 application to production. The copy was made as an apex 4 EA 2, (I have backups of different times in July). The error:
    ORA-20001: GET_BLOCK Error. ORA-20001: Execution of the statement was unsuccessful. ORA-06550: line 4, column 1: PLS-00306: wrong number or types of arguments in call to 'CREATE_PAGE_ITEM' ORA-06550: line 4, column 1: PL/SQL: Statement ignored <pre>declare h varchar2(32767) := null; begin wwv_flow_api.create_page_item( p_id=>298101103038895115 + wwv_flow_api.g_id_offset, p_flow_id=> wwv_flow.g_flow_id, p_flow_step_id=> 45, p_name=>'P45_PRODUCTBACKLOG'

    This is the response that sends the team apex.
    Production is very different than our EA versions. On our EA site, we explicitly stated that an export from there may not work against 4.0. From your error, it looks as if the create_page_item procedure changed between EA2 and production. The only recommendation is to take an export from production and compare the statements used for create_page_item. If you can update your EA export to match the new format, you might be able to import but again, that action is unsupported.
    -- APEX Support Team

  • Getting ERR-3331 while trying to import application

    Hello,
    i'm trying to import an application from a 3.1.0.00.32 to a 3.1.0.00.30 APEX (there is no compatibility problem, right?!). I first was wondering the exported file is very big (~27 MB). When I'm trying to import this application on the target system it's processing for a while and then after ca. 5-7 minutes an error-page appears. ERR-3331 the error-text is in German but means something like "This application has allready been redirected and can't be redirected again."
    I don't know what to do. Hope you can help me.
    Thank you in advance
    Sebastian

    Hi,
    i now have tested the exported script with SQL*Plus getting following result:
    Set Application ID...
    begin
    FEHLER in Zeile 1:
    ORA-20001: Die Package-Variable g_security_group_id muss festgelegt werden.
    ORA-06512: in "FLOWS_030100.WWV_FLOW_API", Zeile 48
    ORA-06512: in "FLOWS_030100.WWV_FLOW_API", Zeile 246
    ORA-06512: in Zeile 4
    may be there is a solution for this error?
    Thank you
    Sebastian

  • Geting an error trying to import a data file into OWB repository

    Hi,
    We're using OWB 11.1.0.7.0
    I'm trying to import a new data file and I'm getting an error.
    When I go to The Project/Files/ I right click on the module I want to add the files to,
    I get a 'Wizard' titled 'Welcome to the Import Metadata Wizard'.
    I click next.
    I get the 'Filter Information' screen that asks if I want to select 'All Data Files' or a specific file.
    I pick 'All Data Files' and click 'next'.
    I get the 'Object Selection' screen that has a left and right panel. The left side is titled 'Available' and the right side is titled Selected.
    The 'Available' panel had the directory in Linux (/etl/datafeeds/dev) where our data files are stored with a plus sign next to it.
    When I click the plus sign, I get an error message that says:
    API2836: Directory
    /etl/datafeeds/dev does not exist.Has anyone seen this? What is the work around? Is it a bug? How do I import a data file into OWB if this isn't the way to do it?
    Thanks,

    Hi, is there any obligation to use import wizard?
    can you use right click and import view/table?
    Ugur MIHCI
    www.ifslibrary.com

  • Error trying to import spreadsheet to a table

    I installed Oracle Database 10g XE on my local pc. While trying to create a table from a spreadsheet that resides on my local machine I am getting an error
    Expecting p_company or www_flow_company to contain security group id of application owner
    Can anyone tell me what this means and how I can correct it ?
    I am new to Oracle and trying to experiment.
    Thanks

    Hi,
    please see also this thread and see if this might help:
    Problem with importing HTML DB applications
    If you don't get any further then please provide the following information:
    1) how large is the file you are trying to upload?
    2) what is the language setting in your browser?
    3) which file character set did you choose (when trying to import the data into the table)?
    4) what is the setting of the registry variable NLS_LANG in HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\KEY_XE
    ~Dietmar.
    Message was edited by:
    daust_de

  • Error while opening the application using semantic object method

    Hello ,
    We just got all the Wave 3 apps and SP08 versions on our Fiori server. While setting up the transnational applications , I am not able to open any app using semantic objects. if i put direct URL I can open the app.
    Error screen shots are :
    The Launchpad designer settings for create sales order app are :
    Please suggest the solution.
    The error is same for all the applications.
    Regards,
    Sheetal
    Tags edited by: Michael Appleby

    Hello Masa,
    Checked this note. Not able to resolve the issue. Can you please explain, for the application to work with Navigation and semantic object what all roles do we need to assign to the User?
    For create Sales Order :
    Component
    Technical Name
    Business Role
    SAP_SD_BCR_FIELDSALESREP_X1
    Business Catalog
    SAP_SD_BC_FIELDSALESREP_X1
    Business Catalog Group
    SAP_SD_BCG_FIELDSALESREP_X1
    Technical Role
    SAP_SD_BCR_FIELDSALESREP_X1
    Technical Catalog
    SAP_SD_TC_T_X1
    LPD_CUST Role
    UIX01SD
    LPD_CUST Instance
    TRANSACTIONAL
    OData Service (Version Number)
    Back-End Server: Delivered Authorization Role (PFCG Role)
    Front-End Server: Authorization Role
    SRA017_SALESORDER_CREATE_SRV
    SRA017:SAP_SD_SO_CRE_APP
    SAP_SD_BCR_FIELDSALESREP_X1
    My user id is assigned to three Roles :
    SAP_SD_BCR_FIELDSALESREP_X1
    SAP_SD_BCR_FIELDSALESREP_X1
    SRA017:SAP_SD_SO_CRE_APP
    Do I need to assign any other roles than these three?
    Regards,
    Sheetal

  • Import Wizard Error trying to Import from CE 9 to BOJ XI 3.0

    I just installed BOJ XI 3.0 on a new server. I am trying to import the reports, users and data sources from our CE9 server to the new server. When I put in the APS name, log on name and password I get a error message saying..
    Unable to connect to cluster @@ to retrieve CMS member list. Locally chached member list not present. Logon cannot continue
    Any help would be greatly appreciated.. I have over 900 reports and I dont wnat to have to manually upload every one..
    Thanks in advance.

    Thomas,
    I am afraid that you will have to upgrade to XI or XIR2 first. Below is something from 3.0 guide:
    If you are upgrading from Crystal Enterprise 9 or 10, you must first upgrade to either BusinessObjects Enterprise XI, or XI Release 2 SP2 or higher.
    Hope this helps.
    Kashif

Maybe you are looking for