Error trying to install SP1 Windows Server 2008 R2

Hi team,
I'm having an error when I'm trying to deploy service pack 1 of Windows Server 2008 R2. I try this scenario installing the SP1 in a workgroup machine and the results were successful. But when I'm trying to install in my Domain it doesn't work. Later I remove
the machine from the Domain and again try to install the SP1 and it also doesn't work.
What permissions in files or procedures can I implement for having a successful deploy of Service Pack 1 in my Domain?
Thanks a lot for your assistance.
Regards.
David S.

Follow troubleshooting
http://windows.microsoft.com/en-us/windows7/troubleshoot-problems-installing-service-pack
http://windows.microsoft.com/en-us/windows7/windows-7-windows-server-2008-r2-service-pack-1-sp1-installation-error-0x800f0a12
Similar problem has been solved here
http://social.technet.microsoft.com/Forums/windowsserver/en-US/c4ac3279-1b2d-44d2-8e2e-08282f0ba270/cannot-install-sp1-on-windows-2008-r2-64bit-error-0x800f0818?forum=winservergen
http://glazenbakje.wordpress.com/2011/12/01/microsoft-windows-2008-server-r2-unable-to-install-service-pack-1-fix/
Regards
Milos

Similar Messages

Error 0x80070643 when installing DHCP Windows Server 2008 ENTERPRISE SP2 64bit

When I try to install role DHCP on Windows Server 2008 I get the following error:
Attemp to install DHCP Server failed with error code 0x80070643. Fatal error during installation.
Please somebody help me!....
Jorge

Hi Jorge,
I am sorry to hear that.
Here are a few things that I suggest you try:
Grant Full Control for SYSTEM, NETWORK SERVICE and Administrator on C:\Windows\ServiceProfiles\networkservice folder.
If you have Windows Process Activation service installed on the machine, uninstall it.
Open required RPC ports.
More information for you:
Service overview and network port requirements for Windows
http://support.microsoft.com/kb/832017#method7
If the issue still persists, please check the event logs to see if there are any related error messages and troubleshoot accordingly.
Regards,
Amy

VC Redist 2013 cannot be installed on Windows Server 2008 Core

Both vcredist_x86.exe and vcredist_x64.exe have this problem. And it can be reproduced 100%.
But all of them can be installed on Windows Server 2008 R2 Core, Windows Server 2012 Core, and Windows Server 2012 R2 Core.
From the log, it seems the installer depends some UI DLLs that are not included in this OS.
[060C:0618][2015-04-15T02:18:41]e000: Error 0x8007000e: Failed to load theme controls.
[060C:0618][2015-04-15T02:18:41]e000: Error 0x80004005: Failed to create main window.
Is it a bug or by design?
The following is the failed log:
[060C:0608][2015-04-15T02:18:41]i001: Burn v3.7.2829.0, Windows v6.0 (Build 6002: Service Pack 2), path: c:\vcredist_x86.exe, cmdline: '-burn.unelevated BurnPipe.{51C9AFD1-AA72-4BA2-8B12-E93691AFD7E3} {1B953492-AB47-43FA-A2BF-E1505C76194D} 3908'
[060C:0608][2015-04-15T02:18:41]i000: Setting string variable 'WixBundleLog' to value 'C:\Users\ADMINI~1\AppData\Local\Temp\dd_vcredist_x86_20150415021841.log'
[060C:0608][2015-04-15T02:18:41]i000: Setting string variable 'WixBundleOriginalSource' to value 'c:\vcredist_x86.exe'
[060C:0608][2015-04-15T02:18:41]i000: Setting string variable 'WixBundleName' to value 'Microsoft Visual C++ 2013 Redistributable (x86) - 12.0.30501'
[060C:0618][2015-04-15T02:18:41]e000: Error 0x8007000e: Failed to load theme controls.
[060C:0618][2015-04-15T02:18:41]e000: Error 0x80004005: Failed to create main window.
[060C:0608][2015-04-15T02:18:41]i500: Shutting down, exit code: 0x4005
[060C:0608][2015-04-15T02:18:41]i410: Variable: WixBundleAction = 5
[060C:0608][2015-04-15T02:18:41]i410: Variable: WixBundleElevated = 1
[060C:0608][2015-04-15T02:18:41]i410: Variable: WixBundleInstalled = 0
[060C:0608][2015-04-15T02:18:41]i410: Variable: WixBundleLog = C:\Users\ADMINI~1\AppData\Local\Temp\dd_vcredist_x86_20150415021841.log
[060C:0608][2015-04-15T02:18:41]i410: Variable: WixBundleManufacturer = Microsoft Corporation
[060C:0608][2015-04-15T02:18:41]i410: Variable: WixBundleName = Microsoft Visual C++ 2013 Redistributable (x86) - 12.0.30501
[060C:0608][2015-04-15T02:18:41]i410: Variable: WixBundleOriginalSource = c:\vcredist_x86.exe
[060C:0608][2015-04-15T02:18:41]i410: Variable: WixBundleProviderKey = {f65db027-aff3-4070-886a-0d87064aabb1}
[060C:0608][2015-04-15T02:18:41]i410: Variable: WixBundleTag =
[060C:0608][2015-04-15T02:18:41]i410: Variable: WixBundleVersion = 12.0.30501.0
[060C:0608][2015-04-15T02:18:41]i007: Exit code: 0x4005, restarting: No
Xiaojin

Hi Xiaojin,
Thanks for posting in MSDN.
I don't think this is a bug. From your description, you want to install VC redist on some servers core for Windows Server 2008, 2012. Based on my knowledge, server core has no graphical user interface (GUI), there is no desktop. Only code written using Windows
application programming interfaces (APIs) can run on Server Core.
More information about server core please refer to here:
What Is Server Core?
Best regards,
Shu Hu
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Please help me with the step by step instructions on how to install a Windows server 2008 on a computer that has Windows 8 installed on it

Please help me with the step by step instructions on how to install a Windows server 2008 on a computer that has Windows 8 installed on it without formatting windows 8.Please email the steps , Thanks

Please help me with the step by step instructions on how to install a Windows server 2008 on a computer that has Windows 8 installed on it without formatting windows 8.Please email the steps , Thanks
Assuming your rig can support virtual machines, you can use Hyper-V and run another OS there.
Better practice however is to use a dedicated machine and use remote desktop to the server.
Corsair Carbide 300R with window
Corsair TX850V2 70A@12V
Asus M5A99FX PRO R2.0 CFX/SLI
AMD Phenom II 965 C3 Black Edition @ 4.0 GHz
G.SKILL RipjawsX DDR3-2133 8 GB
EVGA GTX 6600 Ti FTW Signature 2(Gk104 Kepler)
Asus PA238QR IPS LED HDMI DP 1080p
ST2000DM001 & Windows 8.1 Enterprise x64
Microsoft Wireless Desktop 2000
Wacom Bamboo CHT470M
Place your rig specifics into your signature like I have, makes it 100x easier to understand!
Hardcore Games Legendary is the Only Way to Play!

Whether SAP Netweaver 7.02 could be installed on Windows Server 2008?

Hi ,
    I want to know Whether SAP Netweaver 7.02 not SP6 could be installed on Windows Server 2008? The help install document only mentioned Windows XP and Windows Server 2003, not mentioned Windows Server 2008, but I want to install it to Windows Server 2008 w64, I don't know whether could be installed successfully.
    Thanks for help!

Hi Munish,
    But I don't know where to download SAP JVM 4.
    My SAP NetWeaver 7.02 is only a trail version, so I couldn't download SAP JVM 4 from SAP Market, could you give me one?
   My G-mail is: [email protected]
   Thanks!
   If there is no SAP JVM 4, I only could install SAP NetWeaver 7.02 with j2sdk-1_4_2_19-windows-i586-p or j2re-1_4_2_19-windows-i586-p or j2sdk-1_4_2_09_windows_i586 and j2eesdk-1_4_02_2005Q1, I don't know which version I should choose to install.

CF9 install on Windows server 2008 error

I am getting the following error message when attempting to run the installer for CF9:
Microsoft VC++ 2008 Runtime
Installer has determined that Microsoft Visual C++ 2008
Redistributable Package is not installed. Select OK to install now.
To perform your own installation, select CANCEL. After installation
restart the installer to continue.
this is Windows Server 2008 R2 brand new.
Then I installed the :
The Microsoft Visual C++ 2008 Redistributable Package (x86) installs runtime components of Visual C++ Libraries required to run applications developed with Visual C++ on a computer that does not have Visual C++ 2008 installed
vcredist_x86.exe
http://www.microsoft.com/downloads/fr-fr/details.aspx?familyid=9B2DA534-3E03-4391-8A4D-074 B9F2BC1BF&displaylang=fr
Restart the server, Reinstall CF9, same message.
I do not dare to contiune without help and certitude it will run correctly.
Please Help ,
I just bought it from the store
I even do not know how to contact Adobe, I am in France.
Pierre.

Well, I answer myself,
It needs to install the Visual C++runtime 64bits (not 32bits)
vcredist_x64.exe
Then, I still have the message, but we just have to say OK, and it will install
coorectly with Visual C++ runtime too.
Problem solved.
Pierre.

Undefined error updating Adobe AIR on Windows Server 2008

I am trying to upgrade from Adobe AIR version 2.7.1.1961 to version version 3.1.0.4880.
The operating system is Windows Server 2008 Standard - SP1
I am logged on as the administrator and shortly in the upgrade process, I receive a Window stating:
Sorry an error has occurred
An error occured while install Adobe AIR. Installation may not be allow by your administrator.
Please contact your administrator
Following is the install log:
[2012-02-15:15:56:56] Runtime Installer begin with version 3.1.0.4880 on Windows Server 2008 x86
[2012-02-15:15:56:56] Commandline is:
[2012-02-15:15:56:56] Installed runtime (2.7.1.19610) located at c:\Program Files (x86)\Common Files\Adobe AIR
[2012-02-15:16:02:46] Relaunching with elevation
[2012-02-15:16:02:46] Launching subprocess with commandline c:\users\admini~1\appdata\local\temp\1\air704f.tmp\adobe air installer.exe -ei
[2012-02-15:16:02:46] Runtime Installer begin with version 3.1.0.4880 on Windows Server 2008 x86
[2012-02-15:16:02:46] Commandline is: -stdio \\.\pipe\AIR_15060_0 -ei
[2012-02-15:16:02:46] Installed runtime (2.7.1.19610) located at c:\Program Files (x86)\Common Files\Adobe AIR
[2012-02-15:16:02:46] Starting silent runtime update. Updating runtime from version 2.7.1.19610 to version 3.1.0.4880
[2012-02-15:16:02:46] Installing msi at c:\users\admini~1\appdata\local\temp\1\air704f.tmp\setup.msi with guid {FE23D063-934D-4829-A0D8-00634CE79B4A}
[2012-02-15:16:02:46] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1601" errorID=0]
[2012-02-15:16:02:46] Rolling back install of c:\users\admini~1\appdata\local\temp\1\air704f.tmp\setup.msi
[2012-02-15:16:02:46] Rollback complete
[2012-02-15:16:02:46] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1601" errorID=0]
[2012-02-15:16:02:46] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1601" errorID=0]
[2012-02-15:16:02:46] Runtime Installer end with exit code 7
[2012-02-15:16:04:17] Runtime Installer end with exit code 7
Other notes that might be of use is that I have tried to uninstall Adobe AIR with a similar error message.
I am hoping someone can provide some insight on how to resolve this situation.

Thanks for the links above.
I downloaded and run the Microsoft Install and Uninstall Fix It. Thinking there could be issues with the current version of AIR, I ran the utility and chose to uninstall the current version of AIR; and was successful.
I followed up by restarting the computer and then go to the Adobe AIR download page. When I try to install the new version, it get basically the same error message. The log file from the install is below.
[2012-02-16:18:07:14] Runtime Installer begin with version 3.1.0.4880 on Windows Server 2008 x86
[2012-02-16:18:07:14] Commandline is:
[2012-02-16:18:07:14] No installed runtime detected
[2012-02-16:18:07:19] Relaunching with elevation
[2012-02-16:18:07:19] Launching subprocess with commandline c:\users\princi~1\appdata\local\temp\air11d3.tmp\adobe air installer.exe -ei
[2012-02-16:18:07:19] Runtime Installer begin with version 3.1.0.4880 on Windows Server 2008 x86
[2012-02-16:18:07:19] Commandline is: -stdio \\.\pipe\AIR_2648_0 -ei
[2012-02-16:18:07:19] No installed runtime detected
[2012-02-16:18:07:19] Starting silent runtime install. Installing runtime version 3.1.0.4880
[2012-02-16:18:07:19] Installing msi at c:\users\princi~1\appdata\local\temp\air11d3.tmp\setup.msi with guid {FE23D063-934D-4829-A0D8-00634CE79B4A}
[2012-02-16:18:07:19] Error occurred during msi install operation; beginning rollback: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1601" errorID=0]
[2012-02-16:18:07:19] Rolling back install of c:\users\princi~1\appdata\local\temp\air11d3.tmp\setup.msi
[2012-02-16:18:07:19] Rollback complete
[2012-02-16:18:07:19] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1601" errorID=0]
[2012-02-16:18:07:19] Runtime Installer end with exit code 7
[2012-02-16:18:07:19] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="1601" errorID=0]
[2012-02-16:18:07:22] Runtime Installer end with exit code 7
Finally, when I try to run the fixit tool again, it is of no practical use as there is no program to repair.
Again, I am hoping someone can provide some insight on how to resolve the current situation

Oracle 10g install on Windows server 2008 R2 ( 6.1 )

Hi All,
I am trying to install Oracle 10g over windows server 2008 R2 (6.1) but it gives error that OS is not supported. I tried to install below version.
Oracle Database 10g Release 2 (10.2.0.4.0)
Enterprise/Standard Edition for Microsoft Windows Vista x64, Windows Server 2008 x64,
Microsoft Windows Server 2008 R2 x64, Windows 7 x64
But it fails with error that OS version 6.1 is not supported. On download page it is written to get 10.2.0.5 patch from My Oracle support for windows server 2008 R2, I got patch p8202632_10205_MSWIN-x86-64 but it requires a pre-installed oracle home.
So how should I install Oracle 10g as 10.2.0.4 does not get installed and the patch asks for a previous install?
The reason I am installing Oracle 10g is that our Java application is running in production over JDK 1.4 and Oracle 11g does not provide JDBC driver for JDK 1.4, is there any JDBC driver for Oracle 11g that can work with JDK 1.4?
Thanks in advance for help.
Best Regards!
Irfan

Please find below last lines of logs:
*** Product-Specific Prerequisite Checks Page***
INFO: Entry point:oracle.server_EE
INFO: Starting Prerequisite checks : Sun Mar 11 09:16:16 PDT 2012
INFO: Checking CertifiedVersions
     This is a prerequisite condition to test whether the Oracle software is certified on the current O/S.
INFO: Expected result: One of 5.0,5.1,5.2,6.0
Actual Result: 6.1
Check complete. The overall result of this check is: Failed <<<<
INFO: --------------------------------------------------------------------------------
INFO: Checking ServicePackChecks
     This is a prerequisite condition to test whether the Service Pack level recommended for installing the product is available on the system.
INFO: Check complete. The overall result of this check is: Not executed <<<<
INFO: --------------------------------------------------------------------------------
INFO: Checking TotalMemory
     This is a prerequisite condition to test whether the system has sufficient physical memory.
INFO: Expected result: 256MB
Actual Result: 4094MB
Check complete. The overall result of this check is: Passed
INFO: --------------------------------------------------------------------------------
INFO: Checking DetectIfDHCPAssignedIP
     This is a prerequisite condition to test whether the primary IP address of the system is DHCP-assiged or static.
INFO: Detecting the IP.....:10.1.87.20
INFO: Checking the network interface display name.... :Intel(R) PRO/1000 MT Dual Port Network Connection
INFO: Checking the network reference name..... :eth4
INFO: Checking the platform .......233
INFO: Check complete. The overall result of this check is: Passed
INFO: --------------------------------------------------------------------------------
INFO: Checking CheckPathEnvVariableLength
     This is a prerequisite condition to test whether the PATH environment variable is within the allowable character limits. On Windows XP and Windows 2003, the maximum character allowed is 8191. On Windows 2000, NT and 98, the limit is 1023 characters.
INFO: Checking Oracle home from the env... :C:\oracle\product\10.2.0\db_1
INFO: Checking Path from the env... :C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\
INFO: Max path length for OS:Windows Vista is... :8191
INFO: *****************************
INFO: Check complete. The overall result of this check is: Passed
INFO: --------------------------------------------------------------------------------
INFO: Checking OracleBase
     This is a prerequisite condition to test whether the environment variable 'ORACLE_BASE' is set as a subdirectory of the Oracle home
INFO: Check complete. The overall result of this check is: Passed
INFO: --------------------------------------------------------------------------------
INFO: Checking OracleHomeSpace
     This is a prerequisite condition to check whether the specified Oracle Home contains any spaces in the path.
INFO: Check complete. The overall result of this check is: Passed
INFO: --------------------------------------------------------------------------------
INFO: Checking InstallOnRoot
     This is a prerequisite condition to test whether installation is done at the root of a drive.
INFO: Checking the ORACLE HOME.... :C:\oracle\product\10.2.0\db_1
INFO: Check complete. The overall result of this check is: Passed
INFO: --------------------------------------------------------------------------------
INFO: Checking DetectAnyInvalidASMHome
     This is a prerequisite condition to test whether the system has been cleaned properly.
INFO: Checking the platform .......233
INFO: Check complete. The overall result of this check is: Passed
INFO: --------------------------------------------------------------------------------
INFO: Checking CompatibilityChecks
     This is a prerequisite condition to check whether the Oracle Home specified by the user already contains an installed product which is incompatible with the product being installed.
INFO: Actual Result: NEW_HOME
Check complete. The overall result of this check is: Passed
INFO: --------------------------------------------------------------------------------
INFO: Prerequisite checks completed : Sun Mar 11 09:16:17 PDT 2012
SEVERE: Some required prerequisite checks have failed. Please make sure the system meets all the requirements before install can proceed.
INFO: User Selected: Yes/OK
WARNING: Do you really want to exit?
INFO: User Selected: Yes/OK
INFO: recdelete: C:\oracle

When trying to start my Windows server 2008 R2 Data Center, I am getting "ramdisk device creation failed due to insufficient memory",

I have the following:-
VMWare workstation version 9 , with windows server 2008 R2 data center installed.
- I have installed the windows 2008 R2 inside the VM using an iso image.
- The host is windows 7.
I use to work well with the VM, but after adding a new VM to the same workstation . I start getting the following error when starting my old VM
ramdisk device creation failed sue to insufficient memory.
And on the windows boot manger screen they mentioned to :-
inset my windows installation dis and restart my PC.
click “repair your computer”
but not sure if this will fix the problem , baring in mind that the RAM assigned to the VM
is 24 GB & 80 GB hard disk.
The error is
Link.
so can any one advice what is causing this error?
Thanks

You might start by checking the RAM.
http://windows.microsoft.com/en-US/windows7/Diagnosing-memory-problems-on-your-computer
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Windows sbs 2003 sp1, windows server 2008 R2

I have windows sbs2003 sp1 & windows 2008 R2 Licenses...I want to setup ERP application with SQL on windows 2008 R2, Terminal server windows 2008 R2 for RDP & Ncomputing & E-mail server for Internal and external use. I have IBM Server with
XEON processor and 24 GB RAM.
I am using VMware ESXI 5.5 for virtulisation and installed one instance of WINDOWS SBS 2003 with Exchange for DC & EMAIL...and 2008 R2 one instance as member server for Application server ( ERP with SQL Express ) and another instance with Terminal server
and other application.
Above set up is not working smooth as it was expected..some times DC fails and so Exchange...Can you suggest any better alternative or correct method of implementation.

Hi
You should separate Exchange and DC on the same server and introduce a second DC incase the first one goes down.
Perhaps install Exchange on server 2008 r2.

Backup Error : The Data Is Invalid Windows Server 2008 R2

Hello,
I have a Problem when I try to make Backups to Partition C in Windows Server 2008 R2:
Error The Data is Invalid.
Obs: I can make backups for System Reserved Partition .
I had the same problem 2 months ago (the data is invalid), Then I folowed this the advice to delete "Framework64\v2.0.50727\Temporary
ASP.NET Files" and worked for me , from this post: http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/89052b85-9c9b-479f-ab76-a20da3cc4696
Now I have the same problem and I delete the
Temporary ASP.NET Files , but it is not working , I received the same error on backup:
"The backup operation that started at '‎2012‎-‎09‎-‎20T07:13:26.024163900Z' has failed with following error code '2147942413'. Please review the event details for a solution, and then rerun the backup operation once the issue is resolved."
When I try vssadmin list writers, Everything is ok , "No error" .
I tried to run :
net stop "System Event Notification Service"
net stop "COM+ Event System"
net stop "Microsoft Software Shadow Copy Provider"
net stop "Volume Shadow Copy"
cd /d %windir%\system32
net stop vss
net stop swprv
regsvr32 /s ole32.dll
regsvr32 /s oleaut32.dll
regsvr32 /s vss_ps.dll
vssvc /register
regsvr32 /s /i swprv.dll
regsvr32 /s /i eventcls.dll
regsvr32 /s es.dll
regsvr32 /s stdprov.dll
regsvr32 /s vssui.dll
regsvr32 /s msxml3.dll
net start "System Event Notification Service"
net start "COM+ Event System"
net start "Microsoft Software Shadow Copy Provider"
net start "Volume Shadow Copy"
But is not Working
Any Advice ?
Thank's

Hello Lucian,
the issue may be caused by an invalid entry inside the following registry sub tree.
HKey_Local_Machine\Software\Microsoft\Windows NT\CurrentVersion\ProfileList
Please open the registry editor with regedit.
Expand and local to the subtree, check if there is an entry that has a ".bak" value appended. If so, this may be cause the failure when trying to resolve the SID of the writer.
Please backup the registry key first, and then delete that entry with the extra ".bak" and reboot the server then test the backup
Run the command "vssadmin list writers" and make sure all the writers are stable with no errors
Please look for errors in application event logs after you initiate backup on the server
Sincerely, Asifkhan -- Please mark my post helpful if it was really helpful to you.

Domain group validation hangs during ECC 6.0 install on windows server 2008

Hello to the group.
We are installing ECC 6.0 R3 on a windows server 2008 system (with SQL 2008) and the install is hanging in the user/group creation steps. Specifically, the install is able to create a group at the domain level but hangs when it tries to verify that group.
What's funny is the system is able to create two local domain groups without any issues.
Have any of you run into this same issue? We've tried updating sapinst and restarting the install process using a known good domain admin account (we are also creating a ticket to SAP support).
Thanks for any help!
J. Haynes

> This is actually a Domain based install.
ok
> So far after 12 hours the install is still hung. So we are looking at both network and issues with the AD related DLLS.
You can doubleclick on the orange icon (the sapinst backend process) next to the clock on the desktop and scroll down. There you may find a hint why it's taking so long.
Maybe you have a wrong/missing DNS server entry so the server is unable to find the domain controller, maybe the firewall is enabled and blocking asynchronous answers.
Markus

Ethernet controller driver not installing after Windows Server 2008 installation on Cisco UCS blade

I am using MDT 2010 to deploy Windows Server 2008 to a Cisco UCS B200 blade. The OS and hotfixes install with no problem. The system reboots and attempts to connect to the deployment share to continue with the task sequence and I receive an error stating
"A connection to the deployment share could not be made. The following networking device did not have a driver installed. PCI\VEN_1137&DEV_0043&SUBSYS_00481137&REV_A2"
The driver in question is the driver for the Ethernet controller for the UCS blade. More specifically, it is the network driver for the Palo card in the UCS Chassis. When I Ignore or Abort the install, I am able to manually install the driver and restart the
task sequence. The build then completes successfully with no further issue. I just cannot seem to automate the driver install. Has anyone dealt with this type of issue?

Vik and stealthfield - thank you for your responses.
I was preparing a script to manually move the driver into the c:\windows\inf location when I had to stop to create a new task sequence for a different build. It was while building this task sequence that I found the soulution to the problem.
In the Post Install -> Inject Drivers step of the Task Sequence, I noticed that it was executing a command of type "Inject Drivers" with a selection profile of "All Drivers" and "Install only matching drivers
from the selection profile" selected.
I changed this to run a command of type "Run Command Line" and specified that it execute "%Scriptroot%\ZTIdrivers.wsf". I noticed that this was selected in one of my other builds that was working properly, so I thought I'd
give it a try. - IT WORKED.
So to sum up, the solution was to change the type of command being executed in the "Post Install -> Inject Drivers" step of the task sequence. After this change, the machine came up and continued the task sequence with no further issues.
Thanks again for the responses - They were helpful and I do appreciate it.

Is is possible to install X64 windows server 2008 R2 on Virtual machine 2007 Service pack1?

I am trying to install window server 2008R2 X64 on virtual machine 2007 service pack 1. But unable to proceed. while refering various forum,
It is listed that from service pack1 we can install windows 7 & window server 2008 std edition. But nowhere it listed that window server 2008R2 is supported or not.
Can one let me know if it fisible to install window server 2008R2 X64 on virtual pc 2007 or any work around.
Thanks,
AK

I'd ask them over here.
https://social.technet.microsoft.com/Forums/en-us/home?forum=virtualserver
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

MKS Toolkit 9.2 32 bit or 64 bit install on Windows Server 2008 64 bit

Hi Hussein,
I have single node installation with the below
12.1.3 is running on Windows Server 2008 (32 bit) with 11.1.0.7 database (32 bit).
We would like to split the DB Tier to 64 bit Machine and convert the database from 32bit yo 64 bit database to get benefits from 64bit database.
Hence, Need to prepare other machine with 64bit windows server 2008 machine with 64 bit oracle software. I would like to install MKS Tool Kit 9.2. Here I have doubt that, which MKS Toolkit bit version 32 bit or 64 bit needs to install on 64 bit OS?
Please advise...

Hi,
You will need to have the 64-bit version of the software installed.
Thanks,
Hussein

Error trying to install SP1 Windows Server 2008 R2

Similar Messages

Maybe you are looking for