Error trying to open up methodaction binding on a page
I am trying to open a method action binding on a page that we have created and when i try to open any methodaction it does not open ...
int he messages tab i see the following error java.lang.RuntimeException: Could not find data control ABC1234AMDataControl.
i am guessing this is an old data control that is still hanging out there somewhere but it is not listed in the data controls and I cannot find where this might be refrenced ( is it an old AM maybe)
i am using Jdeveloper 11.1.1.4
Any ideas how to clean this up?
Thanks!!!
I had to go into the pagedef and delete XML that was referring to the datasource that was no longer valid. I am guessing this was beacuse of something that was refactored at some point.
Thanks for your suggestions.
Similar Messages
-
Error trying to open source media - Compressor 1.2.1
I have a problem with a movie that have been sent to me. I seem unable to add it to a batch in Compressor or in Final Cut Pro 4.5 HD for the that matter.I'm using QuickTime 7.0.3 adn Mac OS X 10.4.3
When ever I had it to Compressor I get this error:
"Alert: Error trying to open source media file"
http://www.saruken.com/temp/Compressor-Error.jpg
And when I import it into Final Cut I get this error:
"File Error: 1 file(s) recognized, 0 access denied, 1 unknown."
http://www.saruken.com/temp/FCP-error.jpg
The settings for the offending movie are:
Format: H.264, 640x480, Millions, AAC, Stereo (L R), 22.050kHz
FPS: 29.97
Data Rate: 90 kbytes/sec
Key Frame: Every 300 Frames
The only difference between my test, which works fine, and this file is the frame rate (mine is at 25fps) and the number of audio channels (my test was in mono).
The file I was sent was encoded in Compressor, not sure which one - but I think it might be version 2.
The strange thing is it opens in QuickTime fine. I've tried exporting from QuickTime Pro as another h.264 with mono sound with no joy. I've tried saving a reference of the movie to see if that works, again no joy.
The only way I can get Compressor to accept the file is by transcoding it to another codec, like Soreson 3. Then FCP and Compressor are happy.
What I can't work out is why the h.264 file I made is fine (and any file I still make as well), and the one I was sent is not. I'm also having the same problem with an h.264 file I downloaded from Apple QuickTime Trailers, and an another I found on the web.
Updates that have been done recently incase they might have caused the problem are 10.4.3 and installing Motion 2 Trail (since removed), which wanted to update Pro Application Support (this might be the problem?).
Any help greatly apprieated
HamiI just tried the offending movie file on my Powerbook, it has never seen Motion 2 or those Pro Application Support updates - and it gets the same error.
Very odd indeed - any ideas?
thanks in advance
Hami -
Error trying to open the book.
When I go to open a new book with Blurb application in InDesign I get a message that says: Error trying to open the book. What can I do about it?
It's the InDesign CC. I have a MacBook Pro. When I try to open a new book on the application Blurb I get a message saying the InDesign can't open it.
-
I'm trying to open sound effects from the recource page and there's no waveform
I'm trying to open sound effects from the recource page and there's no waveform
What version of Audition are you talking about? Going from memory, there was a change to how things worked (starting at CS6 maybe?) from their being a "resource centre" to a "Download sound effects and more" link on the help menu. Exactly where that leaves owners of earlier versions would, I think, be a question for Adobe, not a user forum (though there are some pretty clever people who visit here.
-
I get an error trying to open an ebook with adobe
I get an error with the program adobe when trying to open an e book
Adobe is not a program, but a company name.
What Adobe program are you trying to use? -
loaded itunes and it worked for two days, now I get an error message saying it has to close sorry for the inconvenience. Have tried many things from different discussions on the boards and nothing has worked. I tried to open Quick Time because I read that itunes will not work without quick time. That will not open, it says cannot find quicktime.exe file. Some help please.
I tried to open Quick Time because I read that itunes will not work without quick time. That will not open, it says cannot find quicktime.exe file. Some help please.
i think you've diagnosed the problem correctly. it sounds like something nasty has happened to your QuickTime.
let's try this technique first.
head into your Add/Remove programs. uninstall QuickTime.
Next, we’ll manually remove leftover program files and folders.
1. On the Start menu, click My Computer (or double-click My Computer on the Desktop).
2. In My Computer, open Local Disk.
3. Open Program Files.
4. Right-click on the QuickTime folder and click Delete from the shortcut menu.
5. Navigate to C:\Windows\system32\.
6. Remove the files QuickTime.qts and QuicktimeVR.qtx.
7. Restart your computer.
next, we'll get a fresh copy of QuickTime into your PC by doing a repair install of itunes.
switch off antivirus and antispyware applications prior to the repair install.
go into Add/Remove and select itunes. click "Change" and then click "Repair".
if the repair install goes through okay, restart the PC and try launching itunes again. does it launch properly now? -
FDM crashed after trying to open locations and mappings. Login page error
Whilst trying to open mappings for a given location, FDM has crashed. We have restarted the FDM service, however despite the service running cannot log into FDM any more. Internet Explorer now displays the following error:
Internet Explorer:
"Application Error
Description: An exception occurred during the execution of the current web request. Please contact the administrator to review the stack trace in the event log for more information about the error.
Source:
http://ibm-pr-mihdca-01.yodel.net/HyperionFDM/AuthorizedPages/LogonPage.aspx?ReturnUrl=/HyperionFDM/default.aspx"
Event Viewer Application Logs:
Exception Details:
Retrieving the COM class factory for component with CLSID {00000535-0000-0010-8000-00AA006D2EA4} failed due to the following error: 800703fa.
Stack Trace:
at Hyperion.FDM.Classes.LanguageTranslator.LookupPreferredLanguageId(ArrayList listLanguages)
at Hyperion.FDM.Pages.BasePage.OnInit(EventArgs e)
at System.Web.UI.Control.InitRecursive(Control namingContainer)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at Hyperion.FDM.Classes.LanguageTranslator.LookupPreferredLanguageId(ArrayList listLanguages)
at Hyperion.FDM.Pages.BasePage.OnInit(EventArgs e)
at System.Web.UI.Control.InitRecursive(Control namingContainer)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
I have seen potential solutions at the following links, suggesting potential invalid reserved characters (such as &) in the mappings previous uploaded. We will look at trying to remove these rows via a SQL script, however we do not have any visibility at this stage and will require assistance from the DBA's.
Error @ Deleting the existing FDM Account mappings.
FDQM Mapping error
Can anyone please suggest which tables we need to be looking at/guiding the DBA's too? Or even better, can anyone please provide a script? Or could this be a red herring, since the FDM login page is not even loading?Thanks for your response. Yes the exact same solution has worked for us too. FDM crashed last night, which was apparently caused by the flash recovery drive becoming full. This caused the Oracle RDBMS to freeze. After this was re-sized, we then had to restart the Hyperion services this morning. Everything then appeared to be fine, until the above errors occurred. A full reboot has since resolved the FDM issue, but we suspect an IIS restart might have been the answer.
If the same issue occurs again I will update this thread with more info! -
Internal Error trying to open a remote panel in netscape 7.1 in linux
/usr/local/netscape/netscape
Internal Error : "fontmgr.cpp", line 1023
LabVIEW version 7.0
For assistance in resolving this problem, please exit and relaunch LabVIEW, or contact National Instruments.
I got this error when I was trying to open a remote panel from a machine running windows 2000 to a machine with netscape 7.1 browser under linux redhat 7.3
I have made a link in /usr/local/netscape/plugins LV7NPlugin.so -> /usr/local/lib/LabVIEW-7.0/LV7NPlugin.so
I have also copied the file in /usr/local/netscape/plugins but it doesn't work.Here the official statement from NI
The crash happens when LabVIEW can't open the catch-all font of "fixed" as a fallback when a particular font is not available on the system. The "fixed" font is ALWAYS supposed to be available on the system. The "fixed" font is provided by a font alias in the file /usr/X11R6/lib/X11/fonts/misc/fonts.alias. The alias should be defined in the first few lines of this text file. On a SuSE system where the crash is occurring, do an 'xlsfonts | grep fixed' . In a correct configuration, you should see a font called simply "fixed" in the output, but if not, this will cause the LV crash. I have not actually been able to reproduce the problem here without intentionally deleting this alias, because "fixed" is available on our SuSE syste
m with the XFree86 packages from SuSE 8.2 installed. It's possible that this problem has already been corrected by SuSE, and the packages on their FTP site have been updated from the original CD release. Workaround: Download XFree86-4.0.3-19.i386.rpm or later from ftp.suse.com (or a mirror; ftp.mcs.anl.gov is a really fast one in the USA) and upgrade your X server. Verify that "xlsfonts | grep fixed" reports that the font is available. LabVIEW should then display an ugly fixed-width font for the missing font(s), but not crash. -
Error trying to open a chm:
After a MICROSOFT HTML Help compile, with no errors, when
trying to open the chm file get: Cannot open the file:mk:@MSITStore
<followed by the full path> . The file also does not work in
the application. Tried the currently posted forum suggestion re
this error being about the "path being too long" - a shorter path
did not help. This seemed to occur spontaneously. It worked one
day, and after another compile it did not work. Tried Microsoft
Support page article 312456 re replacing and registering hhctrl.ocx
file. Any help would be greatly appreciated.
Thanks in advance. JoeSo it looks like something got damaged in that one particular
project. It claims to compile without error, but perhaps it is
compiling a truncated version. What kind of file size does the .chm
have? Is it normal or is it smaller? When you open it do you get
the Nav pane? Can you click on any topic in the TOC and get it to
open?
I ask this because I have seen the compiler stop without
warning if there is an error in the syntax of the .hhp file. This
sometimes results in a short file, missing a lot of topics, but
otherwise "correct" in the eyes of the compiler.
John -
Error trying to open a project
Hello,
I am trying to open a project that was created on the same system I am trying to acces it . But, I keep on getting an error:
This project is unreadable or may be too new for this version of Final Cut.
The thing is that I started this project on the same computer I'm trying to access it from. I tried copying the project file and opening the file on another system and it worked.
Please helphttp://www.larryjordan.biz/nxltrs/nxltr_44.html#gotchas
Shane -
I don't know why, but when I installed Photoshop Elements 9 on my new computer, I keep getting an error message when trying to open RAW images, which I have never had an issue with on my previous computer. Can anyone help me with this issue?
What's the error message?
Have you changed cameras? Check Camera Raw plug-in | Supported cameras to see what version of Camera RAW your camera requires. PSE9 can support camera RAW up to version 6.5.
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks. -
Installer receives error trying to open
I downloaded Photoshop Elements 12 yesterday and tried to install on a Mac Pro 3,1 with Mavericks installed. The installer errors trying to initialize and offers a message to seek help. I will definitely need help. The download completed normally using Akamai.
you'll need to start with your install logs: http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html
-
Error trying to open Illustrator CS6
I have Master Collection CS6. I just tried to open Illustrator, but can't... can I download it?
Hi Terry.Carver ,
Please click on the link below and download Master Collection CS 6 , You can chose individual application (Illustrator) during installation.
http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html
Please reply for any assistance.
Thanks -
Error trying to open an Excel worksheet...getting Visual Basic MS Forms error
Hi
We have just upgraded a user from Office 2007 to 2013. However he is now unable to open an Excel spreadsheet and keeps getting Visual Basic errors
MS Forms error. “Could not load an object because it is not available on this machine.”
Acknowledge the error then..
MS VBA error “Compile error Can’t find project or library”.
On acknowledging and closing VB window the spreadsheet is available although VB is not running.
VBA Project (Microsoft Forms 2.0 Object Library). However we still received the same errors.
So we reinstalled Office 2013 to see if this would update the dll files. Alas the same error. Another user who works with VB said the FM20.dll files should be deleted and replaced with new ones. We acquired another FM20.dll file deleted the older one and
replaced it in the folder. Rebooted but still the same error.
He is using a 64bit Windows machine with Office 2013 click2run installed.
We have spent 6 hours today trying to fix it with no luck.....Please can you help??
Br
DanHi,
This is the forum to discuss questions and feedback for Microsoft Excel, this issue is more related to the Office develop, please post your question to the MSDN forum for Excel
http://social.msdn.microsoft.com/Forums/en-US/home?forum=exceldev&filter=alltypes&sort=lastpostdesc
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. -
I/O error trying to open old AW files
I have hundreds of old Appleworks files from an older version (5.0) and when I try to open them with my new Intel based iMac using Appleworks 6.2.9 it says
" An I/O error occurred".
All I'm trying to do is open the file - not print or anything else. I can't figure it out.
Need help.
Larry
imac Mac OS X (10.4.8)Yvan Koenig has said he has some AppleWorks 5 files fail to open in AppleWorks 6 with the I/O error. I've never had a problem opening any AppleWorks 5 files whether they were created on a Mac or PC.
Are you sure that some of these files aren't ClarisWorks 4 or earlier files? AppleWorks 6.2.9 (the current version) can't open all ClarisWorks 4 or earlier files & gives an I/O error. There doesn't appear to be a way to predict which files will cause problems. I've had it happen & not happen with all AppleWorks file types. These files can be opened by any other version of AppleWorks 6.
I'm not clear if it's one file or all of the files you can't open. If it's just one or a few, I'd think there is some corruption in the file. If it's a lot (more than half) & you're sure they are AppleWorks 5 files, some basic troubleshooting might help.
First step, delete the AppleWorks 6 preferences as they may be corrupt, particularly the translator cache. See my user tip, AppleWorks has stopped working correctly, for more info.
Did you move these files from one Mac to another using a USB flash drive or other removable device? If the device is PC-formatted, some information in the files may have been lost in the transfer. Another user tip addresses this problem - AppleWorks 6 won't open my AW 5 files.
I'd be willing to take a look at two or three of these problem files for you & see if I can figure out where the problem is. E-mail them to me with a subject line of "I/O errors." Just click my name in blue next to this post. My public e-mail address is in the biography section.
Maybe you are looking for
-
Session time out ask relogin and opens blank page
Hi, Version is : 2 Node 12.1.1 (11.1.0.7) OS : Windows 2003 (DB 64 bit and Apps is 32 bit) Issue: When login session is expired, system will ask for re-login. If we try to re-login, system will show new login page with current user name as default in
-
Help, web cam is not working properly with win vista
Hii.. my web cam is not working properly with win vista..even if the icon appears bt it does nt start.. its lenovo easy capture 2.5...so if u cud suggest me anything... Moderator note; subject edited
-
Concat expression Collection T
Hi all, I have a mapping in my entity, one to many mapping, example relationship "1 question -> many answers" so, in Question class, i can access a collection of "Answers"; But in my criteria query, i need to concat all "Answers' summary" for sorting
-
Material master creation with Classification
Hi All, I am using an MATMAS05 IDOC interface to create the material master data. I am able to create the Basic Data 1 & 2 views. Can any one tell me the segments or feilds in the IDOC from where i can populate values to create the material classific
-
TS3694 im trying to update my phone and it says could not be restored an unknoen error why is this
im trying to update my phone and it says could not be restored an unknoen error why is this