Error trying to print report to both pdf and network printer

Hi all,
When trying to print a report to my network printer or to pdf I get the two errors attached, one right after the other.  The resulting pdf or hard copy has almost everything in it, except for three tables which are completely missing.  When I go back into the report and open the page with the missing table, the table is no longer visible in the report and I get the second error again.  Exiting and restarting diadem brings the tables back.
I've found several threads about pdf and other print errors and tried the solutions there to no avail; specifically the one posted here.
I hope there is a fix to this!  These reports are intended to sell management on diadem! Thanks!
OS Info:
Windows 7 64 bit SP1
18GB RAM
DIAdem Info:
Version: 11.3.0f4563
USI:       1.9.1f4681
DataFinder:  3.0.0f4681
Script Engine:
5,5,0,5207
Debugger: 6,0,0,8424
CLAD
Solved!
Go to Solution.
Attachments:
diadem print error 6-7-12.png ‏17 KB
diadem print error two .6-7-12.png ‏15 KB

Hello testingHotAir,
Just to make sure, do you have administrative privileges for this machine?
Also, you have attempted these exact steps as posted by lerman?
Make sure that you are logged in as Windows administrator.
Click the Windows button and click Printers.
Right-click the Diadem pdf Export and select Properties
Click the Ports tab, then click the Add Port button.
Note: If the Ports tab is greyed out, right-click the Diadem Pdf Export icon and select Run as admin.
Select Local Port and click the New Port button.
Enter PDF1 for the new port name and click OK. Close the Printer Ports window.
Put a checkmark in the box next to the PDF1 port if it is not already checked.
Click on the Advanced tab.
Select the Spool print documents radio button to make the options below it clickable.
Clear (uncheck) the box labeled Enable advanced printing features by clicking it.
Select the Print directly to printer radio button to make the options below not clickable.
Click the Apply button, then click OK.
Important: In order for the changes to take effect, you must restart your computer.
Reboot your computer and then try to print, email, or create a pdf from Diadem.
Regards,
Jeff L.
Applications Engineer | National Instruments

Similar Messages

  • Function module to Print Customer Invoice as PDF and to Printer

    Hi,
    I am writing a program to create a document through FB01. After that I also need to a PRINT the customer invoice for Same document. I need to print Invoice as PDF and Report and print to a Printer. Which Function Modules can I use for these purposes.
    Thanks.
    FS
    Moderator Message: SDN is not here to do your job for you. There are plenty of good developers who work at CSC who can help you out. Thread locked.
    Edited by: Neil Gardiner on Oct 5, 2010 6:38 PM

    Hi,
    please see the given link,It may help you.
    Re: Regarding Print Problem in ALV
    Regards,
    Shamma

  • Tall report in both HTML and PDF

    Hi,
    I have a report in 10.1.2.0.2 with three logical parts; a header (logo, column titles), a body (actual data) and footer (column sums, some texts). At the moment I'm just using the main section (not header/trailer) but I'm willing to change.
    Depending on the parameters the report will give 1-20 pages (if I was to print them) of output.
    I would like to offer both HTML and PDF output but I'm having some issues.
    If I set the height of the main section to 25 centimeters/10 inches and run the reports with parameters that produce 2 pages of output, I will get two pages i the PDF perfectly. The HTML will then get a seam (empty row) after 25cm/10In and then continue. The problem is that the second part of data is in a separate html table, making the columns not aligned to the first part.
    So, PDF OK, HTML ugly.
    If I set the height of the main section to 250 centimeters/100 inches and run the report again the HTML is fine. One long table and therefore consistent columns.
    Now the PDF consists of only one page. It looks fine but after the last row I can scroll down much more as the PDF "page" is really tall now.
    So, PDF ugly, HTML OK.
    Any suggestions for acheiving a nice result in both PDF and HTML?
    Kind regards
    Tomas Albinsson
    Stockholm, Sweden

    Many thanks Denis, worked perfectly!
    Now the customer has decided that they want the header on each page...
    So now I don't need to use your solution but it's good to know how to solve it.
    Fortunately (?) I've got a new problem now.
    If the output spans two pages I now get one head, the first part of data, head again, rest of data and foot. Fine.
    The problem is that the columns of head and data on page two are not aligned with the ones on page one.
    So head and data always align, but only withing the page. Page two might be much wider than page one.
    This is is HTML output and the frames are set to horizontally fixed.
    Seems to be the footer. Didn't help putting it in a horizontally fixed frame of it's own.
    Suggestions?
    Kind regards
    Tomas

  • I am trying to subscribe to Adobe Export PDF and get a page error.

    i am trying to subscribe to Adobe Export PDF and get aage error on the site.

    Hi there!
    Are you certain that the serial number is for InDesign? And the correct version?
    Please feel free to PM me if you wish to verify the serial number.
    Thanks,
    Amy

  • Gray box around images in PDF and when printing? Why?

    Hi,
    I'm using CS5 and I'm getting a gray box around any image embedded in my document.  The box comes if I click on it when a PDF and it prints around them.  I can't seem to figure this one out.  I'm not used to prepping files for print and I'm trying to send this out to someone who needs to print it.
    It's CMYK.
    I've tried to flatten transparency using both vector and rasterize.
    I've made sure the images are embedded.
    I can't figure this out!!
    Please, help.
    Thanks.

    does this look like your problem?
    http://indesignsecrets.com/eliminating-ydb-yucky-discolored-box-syndrome.php

  • I use an Epson Stylus Office BX320FW printer with my IMac.  Since upgrading OSX, I have lost the ability to print and scan.  I have downloaded printer drivers from both Epson and Apple.  I am using the printer in wifi mode but can not get it print or scan

    Hi Everybody,
    I use an Epson Stylus Office BX320FW printer with my IMac.  Since upgrading OSX, I have lost the ability to print and scan.  I have downloaded printer drivers from both Epson and Apple.  I am using the printer in wifi mode but can not get it print or scan.  How do I uninstall the Epson software and start all over again?
    nickel_man_65

    Not using any mouse pad, I have a very smooth desktop. But I just tried to use a sheet of A4 printing paper, but no result, the problem persisted.
    Someone on this forum suggested, that USB3 may interfere with the magic mouse.
    I have 2 LaCie HDD's about 70 cm away from the mouse, I use them on Thunderbolt. But in operation or not - the result is the same, the mouse plays up! Just now I was clicking the desktop and the mouse created a new folder!!
    Thanks for the advice, Bee
    Cheers, Gerd

  • Ad Hoc Query - reporting on both PA and OM data in same query.

    Is it really not possible to report on both PA and OM in the same query?  Does the two different infosets prevent you from doing this? 
    As a workaround I can run two separate queries and just join the data using Excel.  However - I'm having some trouble using the OM infoset.  I have a list of job ID's and I'm trying to report on the job short text and the "duty code" which is a custom OM object.  Is there a way to add this custom object to the infoset? 
    Also, I'm finding it difficult to report on the relationships as "Object" is always listed as an output ONLY.  Is there a way to make it available as an input?

    If you are using logical database PNP, then you can try to add infotype and check the option 'Infotype of related objects' .
    This will allow you various HRP tables to add to your query by the relationship.
    If you check responsiblity you can use relationship B007 and selecting 1000 would give you the short text and long text of the ID.
    This is a very good option available for PNP database.
    Regards,
    SC

  • When I open itunes it freezes for a few seconds then says iTunes stopped working and closes down. I have tried downloading the latest version, both repair and remove and it still keeps happening

    When I open itunes it freezes for a few seconds then says iTunes stopped working and closes down. I have tried downloading the latest version, both repair and remove and it still keeps happening

    Tried the un-install and getting the same problem although it takes a bit longer before it crashes this time. Checked the problem report and it looks the same as the previous reports.
    Problem signature
    Problem Event Name:          APPCRASH
    Application Name:          iTunes.exe
    Application Version:          10.2.1.1
    Application Timestamp:          4d756476
    Fault Module Name:          MediaToolbox.dll
    Fault Module Version:          1.0.694.3
    Fault Module Timestamp:          4d4d9a00
    Exception Code:          c0000005
    Exception Offset:          0034a672
    OS Version:          6.0.6002.2.2.0.768.3
    Locale ID:          2057
    Additional Information 1:          fd00
    Additional Information 2:          ea6f5fe8924aaa756324d57f87834160
    Additional Information 3:          fd00
    Additional Information 4:          ea6f5fe8924aaa756324d57f87834160

  • Form report with both edit and column link

    hi experts,
    How can we create form report with both edit and column link. Ie, the form should have both the Edit link and column link. When we click on the edit link(in page1) it should go for the page2 and the page2 should display the corresponding row fields which should be editable. but when i click the column link it should bring me to the next page but the corresponding values of the column should not be editable.
    Regars,
    KK

    hi,
    Here i have achieved this by making the column link and page navigation.

  • HT1338 I'm trying to print a document fro safari and the print command is at the bottom of the page and not visible.  I can't move it up and the print command shortcut doesn't work.  How do I print this document.

    I'm trying to print a document from safari and the print command is at the bottom of the page and I can't move it up.  The print command shortcut doesn't work and I would like to know how I can print this document.

    Why do we have to install 2 add ins for something that should be built in? Please add this to the next version or an update to this one even. We should see the full path of a bookmark when we search for it. Show Parent Folder alone isn't enough if you have sub folders, so I installed Go Parent Folder as well in case of sub folders.

  • When printing from an online PDF, the page prints in extra large scale. How do I fix this?

    when printing from an online PDF, the page prints in extra large scale. How do I fix this?

    This can happen when Firefox has misread the paper size from the information supplied by Windows. Clearing it can involve finding some obscure settings, but here goes:
    (1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
    (2) In the search box above the list, type or paste '''print''' and pause while the list is filtered
    (3) For each setting for the problem printer, right-click and Reset it. The fastest way is to right-click with the mouse and then press the r key on the keyboard with your other hand.
    Note: In a couple other threads involving Brother printers, the preference '''printer_printer_name.print_paper_data''' was set to 256 and when the user edited it to 1 that fixed the paper size problem. If you see a 256 there, you can edit the value by doubling-clicking it or using right-click>Modify.

  • I print 2 pages to pdf and file size is 600k, I print 1 additonal page and file size goes to 6M, what would cause this (graphics are same on all pages)

    I print 2 pages to pdf and file size is 600k, I print 1 additonal page and file size goes to 6M, what would cause this (graphics are same on all pages).
    I know the colour graphic shading in the document that causes the issue of larger file size, but it doesn't make sense that printing 1 additional page with same information as first 2 pages would cause this.

    I print 2 pages to pdf and file size is 600k, I print 1 additonal page and file size goes to 6M, what would cause this (graphics are same on all pages).
    I know the colour graphic shading in the document that causes the issue of larger file size, but it doesn't make sense that printing 1 additional page with same information as first 2 pages would cause this.

  • Output determination and Printer determination for  both PO and GR

    Dear all,
    Can anyone please help me in congiguring the output determination and printer determination for  both PO and GR. please give me detailed configuration including the paths as i am stuck with the configuration.
    Thanks & Warm Regards
    Somashekar Anand

    hi Somashekar
    follow he steps
    Output of Purchase Order
    1. Condition Table
    SPRO > Material Management> Purchasing -> Message -> Output Control->Condition Tables->Define Condition Table for Purchase Order
    Select:
    Purchasing Doc. Type,
    Purch. Organization,
    Vendor
    2. Access Sequences
    SPRO -> Material Management-> Purchasing -> Message -> Output Control->Access Sequences->Define Condition Table for Purchase Order
    3. Message Type
    SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Types->Define Message Type for Purchase Order
    *4. Message Determination Schemas*
    4.1. Message Determination Schemas
    SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Maintain Message Determination Schema
    4.2. Assign Schema to Purchase Order
    SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Assign Schema to Purchase Order
    5. Partner Roles per Message Type
    SPRO -> Material Management-> Purchasing -> Message -> Output Control-> Partner Roles per Message Type ->Define Partner Role for Purchase Order
    6. Condition Record
    Navigation Path: SAP Menu-> Logistics -> Material Management -> Purchasing-> Master data->Messages-> Purchase Order-> MN04-> Create
    Now you create PO (ME21N) and save it. Go to ME22N and print the PO by giving output type.
    Output of GR
    After setting table, access sequence and output type for GR,run MB02 transaction, enter material document number. Double click one line item and select messages. Separate screen will be opened to configure outputs. Give the required fields and save the document. Now Run MB90, you can take printout. Output Type: WE03 or WE01 or WE02
    Reward points if helpful
    Thanks and regards
    Ravikant Dewangan

  • Error 0xc18a0001 on my C7250 printer. I've unplugged and replaced printer cartriges.

    Error 0xc18a0001 on my C7250 printer.  I've unplugged and replaced printer cartriges.

    Hi judyk,
    It sounds like you have taken all of the recommended troubleshooting steps to try and resolve the error.  Since you are still experiencing the error, the printer will require servicing.  Please call or email us at one of the methods on the Contact Us page to obtain your servicing options.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Wireless and network printing transcript for Meet the Experts

    On March 16th, HP hosted its first online chat event on wireless and network printing. Below is a transcript of that session.
    I am in the process of planning the next chat event. I would love to hear what topics would interest you, what day of the week and time is best for you, and if you think an hour is too long.
    So, if you get a minute, please let me know.
    Here's the transcript:
    SiobhanF-HP: Welcome! Cameron, Craig, David, and Jim are ready to tackle your questions.
    SiobhanF-HP: Just to remind you if you want to ask a question, you must be a member of the HP Support Forums. If you want to join, go here https://passport2.hp.com/hppcf/createuser.do
    nc256: Do I need a wireless router to hook up my wireless printer?
    CameronL-HP: No, but most people will want to do it this way. You can use a feature called an ad hoc connection to avoid using a router, but it is only covered under an older standard that is slower and less secure. Also, without something to route traffic between the local network and the internet, you cannot get an internet connection. Using a wireless router makes setting up a wireless network easier, and it will generally make the network work better too.
    jest1: I've seen some hardware in stores for a "print server" hardware device that attaches to a network. Is this something that I need in order to run a printer over a network?
    CraigB--HP: Not if you have a printer that has a network connection built in. Many models of HP computers are ready to be connected directly to your wired or wireless network.
    katiepage: How can I print when I am using a VPN?
    DavidH-HP: VPN connections generally hide the rest of your home network to increase the security of the VPN connection. A printer on the network isn’t a security threat but the VPN doesn’t know that. It just hides everything just to be sure. That means that when a VPN is active you need some way to connect to the printer other than your home network. Bluetooth, USB, and even printing to a thumb drive and plugging that into the printer are all ways of getting your print job to the printer that don’t go through your home network.
    SiobhanF-HP: If you have specific product questions, the more information you give us the better we will be able to help you. Getting your exact model number; any error messages; a description of your wireless network including what kind of security you have, what wireless-devices are connected to your network, and your IP address will go a long way to helping us answer your question.
    MelissaP: Why would I want a wireless printer?
    CraigB--HP: The main advantage of a wireless printer is the ability to place the printer somewhere in your home or office even if this is not near your router or computer.
    Deltan: What is the maximum distance I can have between my router and my printer?
    CameronL-HP: It does depend on your environment. Without interference about 25 feet. Walls and floors and other objects can reduce this. The types of walls are important. For example, mirrors and outdoor walls will greatly reduce the indoor range.
     jest1: Is there a preferred wireless router type or brand for wireless printing compatibility? We are using a Linksys 802.11g router in my home.
     JimB-HP: In general, any wireless-router from a name brand manufacturer that has been Wi-Fi certified is compatible with our printers (look for the Wi-Fi logo). We use Linksys in our lab with great success.
     nc256: Are there any digital cameras that can send directly to an HP wireless printer for photo printing?
     DavidH-HP: Many printers support a feature called Pictbridge. If the camera and printer both supports this feature, the camera can be plugged directly into the printer to print photos. Or are you asking about printing over a network connection?
     KevinW: I keep hearing that you shouldn’t use default settings for a network. Why?
     CraigB--HP: There are three reasons not use default settings: First, wireless-routers do not have any wireless security enabled by default. Second, you will be using a common network name in which case you may connect accidentally to your neighbor’s network. Third, your wireless-router is accessible by inadvertent guests who may change the configuration of your wireless-router without your knowledge or use your internet connection without your permission.
    Bodie08: I have an HP Lan attached printer and Windows XP on my home network. Is there a known setting (Firewall/port/other) or patch to address the issue of hpqtra08.exe hanging on Windows XP Shutdown? A number of us in the forum have identified this issue. Thanks!
    DavidH-HP: This problem has been seen in the past but there were attempts to address it. Have you checked to see if there is a later release of software available on the web? (hp.com)
    ZhuLee3: How old is wireless printing technology? I noticed all the experts have around 20 years of experience with it, was there wireless 20 years ago?
    JimB-HP: Wireless printing first appeared with the introduction of the 802.11 standard in late 1990's. HP has been making wireless printers since 2003.
    lpeterson123: What makes wireless so flaky at times?
    CameronL-HP: There are lots of reasons. Wireless signals are affected by distance, walls, metal objects, and other wireless devices like cordless phones. However, most of the problems seem to be from how the network or how security software is configured, and these can also cause things to fail only occasionally or in certain situations. Having a good wireless connection between a PC and printer involves several hardware devices and lots of software made by different companies that all have to work together; if something is not quite right in any of these things then the whole solution looks flaky.
    Bowman16: I use a Mac, are there any features that would not work if I was to set it up for wireless use
    DavidH-HP: All the features will work on a Mac if you install the full HP software solution.
    jest1: Thanks for the answer on the router question. The next question, then, is to ask what would be a recommended consumer-grade wireless-enabled printer (or series) just so I can start my research.
    JimB-HP: Any of our Photosmart or Officejet wireless printers will work with Wi-Fi certified wireless-routers. Our price points really have more to do with how much printing you do. In general, our more expensive printers cost less per page than our less expensive models.
    Bodie08: Why would I choose "spooling" on my PC over "direct connect”?
    CraigB--HP: In general, spooling allows you to use your program sooner than printing directly.
    ZhuLee3: Jim: What is it like to be an "HP Printing Expert"? What kind of stuff do you get to work on, on a day to day basis?
    JimB-HP: I really like my job -- I've always been a radio enthusiast so working on 802.11 technology is really a dream job for me. I'm also fortunate to work with a great team here in Vancouver, WA. More importantly, I like designing equipment that people use in their everyday lives.
    TEACHER1: Recently I changed routers, now I am unable to print wirelessly, even though the SES and wireless network light are steady on my Deskjet 6980 printer. What is the solution? Thanks.
    DavidH-HP: The wireless light indicates that the radio is on but does not indicate that the printer is connected to the network. First check that the printer is connected to the network by printing a network configuration page from the printer.
    AgentRed: I get my internet with a Verizon wireless broadband card. Someone told me that wouldn't work with a wireless printer. Is that true?
    CameronL-HP: Our wireless printers use the 802.11 b, g or n standard which is not compatible with the wireless cellular standard. It would be like trying to connect to a wireless network using Bluetooth. They are different wireless technologies.
    DavidH-HP: Regarding the Verizon card, it is true that you cannot connect the printer over the Verizon connection, but as long as your laptop has Wife you can print to the printer over WiFi at the same time that the Verizon connection is active. This should not be a problem.
    jest1: Is there a "minimum" internet connection that is recommended for wireless printing? We live a bit far from the DSL CO so our connection is sometimes flaky. I would guess that incoming speed shouldn't affect my local wireless LAN but I want to ask it anyway
    CameronL-HP: There are 2 parts to your home network. 1 is your wireless router which manages your local network equipment, then your network connection to the world wide web which your DSL provider gives you. The connection speed of your local network is not affected by your internet connection speed.
    Bowman16: Are any HP printers 802.11n? I do not want to add an 802.11b,g to my network and cause it to slow down.
    JimB-HP: Currently, our printers comply with the 802.11g standard. We are investigation the emerging 802.11n standard.
    ZhuLee3: Will there be a transcript of all the questions and answers from this chat available for viewing after the session? I think I missed some questions at the start.
    SiobhanF-HP: The chat event begins when you joined. Sorry that you can't see what was said before you joined. I hope to have transcript posted tomorrow or on Wednesday at the latest.
    nc256: Where is the future of printers headed? Does HP have any interesting plans with printing technology? And what’s your opinion on whether or not color laser printing will ever approachthe photo realism of ink jet color?
    JimB-HP: The future of HP printing will be characterized by wireless connectivity to not only computers but to mobile internet devices. In fact, as mobile devices become smaller (think phone or netbooks), the need to print from your mobile device might become more relevant.
    jest1: Am I able to print from my iphone to a wireless printer?
    CraigB--HP: You can print photos from your iPhone to HP wireless printers and it works great in my experience. Go to http://www.hp.com/go/iprintphoto to get the details.
    TEACHER1: Thank you. I printed a page. It shows that wireless is disconnected.
    DavidH-HP: Then you just need to input the wireless settings from your new router into the printer. If your printer does not let you input the settings from the front panel, you can use the CD that came with the printer or downloaded from hp.com to configure the printer again ( look for the option to "add a device" ).
    ZhuLee3: Question about security... if I get a wireless printer, what’s to prevent other people within range of my printer, from adding it and printing documents? How is this configured on the actual printer?
    JimB-HP: The simplest way to secure your printer is to enable WPA-PSK security for your wireless network and to use a security pass-phrase that is at least 12 characters long. This configuration is very safe from intruders for the foreseeable future.
    CameronL-HP: It' is also a good idea to use a unique network name, also called an SSID.
    carolj: I have a photosmart C7180 and I have it hooked up to my laptop (windows vista) when the setup completed the printer was put in networking instead of printers and I cannot access it or move it out of there. What do you suggest?
    CraigB--HP: You might need to uninstall and reinstall. Before doing this, make sure your get the latest driver from the HP support at: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=1153754&lc=en&cc=us&dlc=en&lang=en&cc=us This is also where you can get a copy of the instruction book.
    wizll: Hi, I haven't done much research in wireless printing, but I'm interested as I currently have my printer set up the old fashioned way where it's connected to a networked PC, but if the PC is off I can no longer print, which is obviously inconvenient. Do hp wireless printers have a web gui you can connect to once it's on the home network, or is it simply all done from the printer's interface. I've seen some old wired network printers that only use the printer's ui and that seems like a clunky use.
    DavidH-HP: Yes, the HP printers which have networking built-in have what we call an "embedded" web server which allow you to configure settings, check status, and have many other features; on some models you can even scan using the embedded web server.
    nc256: Jim: Will color laser printing ever reach ink jet quality for photos?
    JimB-HP: While never is a long time, inkjet printers will, for the near future, output higher quality photos.
    katiepage: If I'm at home, connected to my office network via VPN, can I access my office networked printers?
    CraigB--HP: Yes, when you are connected to the office VPN, you can print to your office printers. However, you will not be able to print to your home networked printers while you are connected to the VPN.
    jest1: If a friend comes over to my house with their laptop and needs to print something, are they able to do this just by authenticating with my wireless LAN (assuming I have a wireless printer set up)?
    CraigB--HP: In addition to authenticating to your network, you friend will also need to install the printer driver for your printer.
    jpszambelan: Is there a wireless USB device of some kind I can connect to my printer if there is no network connection already built in?
    JimB-HP: HP sells an accessory that adds Wi-Fi capability to your USB printer (see http://www.shopping.hp.com/product/printer/inkjet/wireless/4/accessories/Q6236A%2523A2L) Also, many higher-end wireless-routers allows USB printers to be connected to them to allow sharing of the printer from the network. Note that this solution often limits you to just printing and not scanning from the network.
    rockwoodchev: It seems that my computer can find my printer, but my printer can't find the computer, so that "Scan to computer" won't work. What do I need to do in order to fix that?
    DavidH-HP: This can be blocked by security software running on the PC (such as a personal firewall). Make sure that your firewall is configured to allow communication on your local network. You can also unblock specific ports, but the easiest way is often just to allow communication on the local home network. The specific setting varies from firewall to firewall.
    SiobhanF-HP: We are nearing the end of our chat session. We only have time for 3 more questions. If we did not get to your question, please post it on the Networking and Wireless board in the Printers and All-in-Ones forum. http://h30434.www3.hp.com/psg/board?board.id=Networking
    SSPatrick: Is it possible to print wirelessly to the same HP printer using both a PC and a Mac?
    JimB-HP: Yes -- I do this in my home. I have both Macs and PCs on my network without any trouble.
    Bowman16: Any plans to do this again?
    SiobhanF-HP: Yes we are.
    ZhuLee3: Do all of the experts hang out on the HP community? Will we see you posting there after this?
    DavidH-HP: Oh yes, whenever time permits. In addition to trying to help people, I learn things too.
    JimB-HP: I'm known as Wi-Fi-Guy on the support forums. I hang out there often helping where I can. It helps me be a better designer.
    CraigB--HP: I monitor the forums looking for problems to take back to the development lab for investigation. To date, I have only posted one reply.
    CameronL-HP: I haven't been involved in the past but expect to be more involved in the future.
    SiobhanF-HP: We only have time for one more question. If we did not get to your question, please post it on the Networking and Wireless board in the Printers and All-in-Ones forum. http://h30434.www3.hp.com/psg/board?board.id=Networking
    ZhuLee3: Thanks for setting this up!
    SiobhanF-HP: The transcript will be posted on http://h30434.www3.hp.com/psg/board?board.id=Networking
    TEACHER1: Thank you all for conducting this session !!!!
    jest1: Is there an OS limitation to print wirelessly?
    JimB-HP: All the OS versions supported by the printer as supported wirelessly. In general, we are compatible with Macs, Windows and Linux.
    SiobhanF-HP: We are ending the chat event. Thank you for coming. We hope you found it worthwhile. I will be posting a transcript of the event in the Networking and Wireless board in the Printers and All-in-Ones forum. We will be hosting future Meet the Experts chat sessions on a variety of topics, so please tell us what you thought of the event and how it could be improved. http://h30434.www3.hp.com/psg/board/message?board.id=Feedback&thread.id=525
    Live Forum Closed
    Message Edited by timhsu on 03-18-2009 05:39 PM
    Message Edited by timhsu on 03-18-2009 05:43 PM
    I work for HP, supporting the HP Experts who volunteer their time and technical knowledge to help others.

    I expected this to be released quite earlier. But now that it's in process, I'll wait patiently.
    Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
    Click on the BLUE KUDOS button on the left to say "Thanks"
    I am an ex-HP Employee.

Maybe you are looking for