Error trying to upgrade firmware.

Trying upgrade this firmware in an attempt to use eprint and airprint. But the upgrade keeps failing with the following error message, "Failed to update firmware!! Power cycle the printer and try again." Does anybody know how to resolve this and get this latest firmware. Any help would be greatel appreciated.
Thanks

Please clarify your printer model and your operating system.
If the printer connected through the network, temporary plug it to your PC by USB, as there might be any network blocking which interrupt the update process.
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

  • Error on trying to upgrade firmware on BEFW11S4-V2 ?

    Hi.
    I am trying to upgrade the firmware on a BEFW11S4 V2 router. From the Set-up panel, the current firmware is 1.45, dated Feb 28, 2003.
    I backed up the config. and downloaded the latest firmware:
     "BEFW11S4-V2_v1.45.10_fw.bin" from the Linksys website.
    When I go to update the firmware from the router's Set-up .../Help .../Upgrade Firmware,
    after selecting the above file, the update starts and goes for about 5-10 seconds and then fails with the messages:
    ..."Upgrade action is not finish!!
        Upgrade file pattern error"
        Continue
    ...which then returns me to the previous Upgrade Firmware page. Have I missed something??
    Also...
    As background info. (before I forget), I run the router from an XP destop for connection to a DSL ISP and printers connected to the XP machine and for wireless access for a new Win7 Toshiba laptop. Everything seems to work fine so far, but I thought I should get on the latest firmware, eventhough the update would only be a currency update as the release notes don't seem to be an issue from a quick read.

    I think you should reset the router first.
    Connect the computer with the Ethernet cable to the router Ethernet Port.
    Download the latest firmware from the Linksys website.
    Open the setup page of the router.
    Upgrade the firmware using the .bin file which you have downloaded.
    Do not take the backup.
    After successful upgrade,reset and reconfigure the router settings.
    And see if that helps you.

  • Error Message When Upgrading Firmware for BEFW114S

    To all,
    I have a BEFW114S with a firmware 1.42.7 which I wanted to upgrade to 1.52.02  However, I got the following error message when I tried update the firmware:
    Message:  Warning!  Upgrade File Pattern Error
    Any ideas of what might be causing this.
    Thanks.
    Babylon5

    Hi , here is the problem..... The firmware 1.52.02 is for the model no BEFW11S4 V4.0 and i believe you have BEFW11S4 V3.0...
    Download the firmware 1.45.10 for BEFW11S4 V3.0 and you should be able to upgrade the firmware successfully.

  • Nomad Jukebox Zen Xtra 30GB- tried to upgrade firmware. Process hung, now nothing wo

    This is really frustrating. I know my MP3 player is old, but it was working. Trying to find all the information I needed to have to upgrade this player so that it would work with Windows Vista was difficult. It wasn't all in the same place. I just kept searching and finally found what I thought was everything I needed. I tried to upgrade the firmware to Version 2.0.03 so I could use it with a Windows Vista computer. The process "hung" and now nothing works. I've tried to reinstall the .20.08 firmware, but the computer won't recognize that the player is connected. How can I get any firmware reloaded so I can try to upgrade again or at least still use the player on a Windows XP machine Thanks,

    The same exact thing happened to me yesterday with my Zen Touch 40 GB player. It was working fine, now after my firmware upgrade attempt it's unrecognized by the PC and has no firmware installed but appears to be stuck in "Recovery Mode". There is obviously something wrong with the Creative Firmware update - this should be a very straightforward process, but instead it seems to be wrecking mp3 players. I contacted customer support and they offered to sell me assistance since my player is ancient (2 years old).

  • Re: Error trying to upgrade to 3.2.1 for my AT100-100

    When I apply for upgrade through the service station, it downloaded the upgrade (which is now available on my tablet)...
    then when I try to upgrade, the SS reboots the machine, then starts a full screen window with a progress bar under the Android mascot, but then a 1/4 of the way on the progress, an exlamtion mark appears, and it freezes...
    and I have to hard reboot to go back to my old 3.1
    now in the SS little note that comes with the upgrade, it says if the process fails, reset the machine and try again, do they mean a hard reset, i.e. go back to initial factory settings?
    anyone tried to upgrade and got the same problem as me...
    this looks to me as a destructive upgrade as I lose all my apps, is there a way to back them up for 3.2.1, or can I at least re-install them in the Market as I purchased them?
    On another note, Toshiba Forum is very hard to navigate... and to find this thread was not that easy...
    searchinig anything Tablet leads to a list of Faq answers that have nothing to do with Tablets...
    Very disappointing Toshiba...

    Hi all,
    I have the same problem as described above from nabilh2020. The Update V3.2.1 freezes half the way after restart and a warning icon appears over the Android mascot.
    Existing Version: Android 3.1.06.5.0011
    Kernel-Version: 2.6.36.3-00062-gab8fc7b android-toshiba@dps3build10 #1
    Build-Number: HMJ37.06.5.0011
    ServiceStation: 1.1.11
    Update version: V3.2.1.36.5.0003 for TEG (Germany) 27.02.2012
    Strange, after the last update of the service station I have two symbols for this, but both starts the same application.
    A service request from 2.3.2012 (Case#71564615) didn't brings an answer/solution until yet.

  • Error when trying to upgrade firmware.

    Greetings.
    I was updating the firmware for my WRT54G V5 (via wired connection), but suddenly the router stopped responding. Since then, the power light has been intermitent and I can't even try to connect to the router.
    Is there any solution?
    Thanks in advance.

    Here is another protocol that might help you.
    To reset your router to factory defaults, use the following procedure:
    1)  Power down all computers, the router, and the modem, and unplug them from the wall.
    2)  Disconnect all wires from the router.
    3)  Power up the router and allow it to fully boot (1-2 minutes).
    4)  Press and hold the reset button for 30 seconds, then release it, then let the router reset and reboot (2-3 minutes).
    5)  Power down the router.
    6)  Connect one computer by wire to port 1 on the router (NOT to the internet port).
    7)  Power up the router and allow it to fully boot (1-2 minutes).
    8)  Power up the computer (if the computer has a wireless card, make sure it is off).
    9)  Try to ping the router.  To do this, click the "Start" button > All Programs > Accessories > Command Prompt.  A black DOS box will appear.  Enter the following:  "ping 192.168.1.1"  (no quotes), and hit the Enter key.  You will see 3 or 4 lines that start either with "Reply from ... " or "Request timed out."   If you see "Reply from ...", your computer has found your router.
    10)  Open your browser and point it to 192.168.1.1.  This will take you to your router's login page.  Leave the user name blank, and in the password field, enter "admin"  (with no quotes).   This will take you to your router setup page.  Note the version number of your firmware (usually listed near upper right corner of screen).  Exit your browser.
    If you get this far without problems, try the setup disk (or setup the router manually, if you prefer), and see if you can get your router setup and working.
    If you cannot get "Reply from ..." in step 9 above, your router is dead.
    If you get a reply in step 9, but cannot complete step 10, then either your router is dead or the firmware is corrupt.  In this case, use the Linksys tftp.exe program to try to reload your router with the latest firmware.  After reloading the firmware, repeat the above procedure starting with step 1.
    If you need additional help, please state your ISP, the make and model of your modem, the version of your router, your router's firmware version, and the results of steps 9 and 10.  Also, if you get any error messages, copy them exactly and report back.
    Please let me know how things turn out for you.

  • Error trying to upgrade creative cloud on a mac

    I get the following error message when trying to update mt Creative cloud
    Adobe Creative Cloud Connection Update
    Installation failed. Error Code: U44M1P7

    See the following:
    U44M1P7 - Updates :
    http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html
    U44M1P7, U44M2P7 - Creative Cloud Help / Can't apply Extension Manager update 6.0.2 | Mac OS :
    http://helpx.adobe.com/creative-suite/kb/unable-apply-extension-manager-update.html

  • Trying to upgrade firmware for WRT54G V6 on Windows 7

    Since buying a windows 7 PC, my WRT54G V6 is dropping connection a lot more than it should (1/hr).  Because of this i thought to update the firmware.  I have downloaded the new .bin and accessed 192.168.1.1, but when i try to move to the ADMINISTRATION page all i get is ascii chars and no admin page, the only pages that actually work are the basic setup and DDNS setup.  For info i'm currently running Firmware Version: v1.00.9
    Asked for help online and got as far as downloading Tftp,0, but that onlyworks to the point where it tells me ''unable to get responses from the servers''
    can anyone help or do i just get a new router ???
    Thanks in advance, les
    Solved!
    Go to Solution.

    Try to upgrade the router's firmware using TFTP utility..Download the TFTP utility and save it on the desktop.Also Download the firmware for WRT54G v6 and save it on the desktop.
    Follow these steps to upgrade the firmware on the device : -
    Double click the TFTP.exe file and click run.
    For Server- Enter the IP Address of the router that you assigned.  By default, the router is 192.168.1.1...
    For Password- Enter the password you assigned the router. By default, the router’s password is “admin”.
    For File- Click the triple “…” button and browse for the .bin firmware file...
    Click Upgrade button to start upgrading.  A progress bar should show up to show the progress.
    Once the Upgrade is done press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
    **Make sure your modem is connected to the router on internet port and the computer on the ethernet port of the router while you run the TFTP program.

  • Error trying to upgrade

    I issued pacman -Syu and got this error:
    checking for file conflicts...
    error: the following file conflicts were found:
      ncurses: /usr/share/terminfo/s/screen-256color: exists in filesystem
      ncurses: /usr/share/terminfo/s/screen-256color-bce: exists in filesystem
    errors occurred, no packages were upgraded.

    Check this article to see if it helps:
    http://www.archlinux.org/news/280/

  • Error trying to upgrade itunes

    i click on my shortcut for itunes and get this
    http://img338.imageshack.us/my.php?image=message3mp9.jpg
    so i try installing it and it doesnt work... so i try removing itunes completely and quicktime because i read the a thread saying that may be the problem... it didnt work...
    this is the first message i have been getting when i try updating/reinstalling
    http://img479.imageshack.us/my.php?image=firstmessagexd5.jpg
    then i get this because ok doesnt work and all i can do is hit cancel...
    http://img339.imageshack.us/my.php?image=message2tw4.jpg
    i would appreciate it greatly if you can help.

    with that one, let's try the following procedure.
    first, head into your Add/Remove programs and uninstall your QuickTime. if it goes, good. if it doesn't, we'll just attend to it when we attend to itunes.
    next, download and install the Windows Installer CleanUp utility. use it to clear any existing itunes and/or QuickTime installation configuration information from the PC.
    Description of the Windows Installer CleanUp Utility
    next, use the the following document as a guide for manual removal of leftover itunes and quicktime program files:
    Removing iTunes and QuickTime for Windows
    now try another itunes install. does it go through properly this time?

  • I have the error 1618 when I try to install 4.3.4 my phone is in DFC mode for 4 weeks.. I've tried other computers, reinstal itunes, tried to downgrade, upgrade firmware, tried iReb, tiny umbrella. need help please.

    error 1618 when I try to install 4.3.4 my phone is in DFC mode for 4 weeks.. I've tried other computers, reinstal itunes, tried to downgrade, upgrade firmware, tried iReb, tiny umbrella. What sould I do?

    Hello Philly,
    I believe that when you reset your ipod(command given from the computer, right?)  touch WHILE the ipod was updating, It cleared the system in the middle of writing files, thus corrupting(equivalent of cutting of in the middle of a sentence) the basic running system.
    I suggest you go to an apple store and ask for a technical diagonosis in person. they may offer to help if the problem is fixable. If your ipod is still under warrenty, i would guess it would be free/low cost.
    ~Remember, I am just giving an educated guess on limited information

  • Error-19 while trying to upgrade to v.7.4.1

    In Airport Utility, when trying to upgrade to the 7.4.1 firmware (from 7.3.2), I keep getting an Error-19 message: *An error occurred while reading the configuration*. Make sure your Apple wireless device is plugged in and in range of your computer or connected via Ethernet and try again (-19)".
    This is despite that it is in range and it is connected and working properly. I have not tried with a direct (wired) Ethernet connection. But after reading the many problems with v.7.4.1, I'm not sure I want to update to this version. Now, everytime I turn on the MBP or switch user accounts, the Airport Utility turns on and I get an an annoying message that there is a problem with my base station requiring the update. The green status light on the on-screen advisory has now turned to amber. Working off an Airport Extreme/ 1Tb TC.
    Any clues to returning to a green status light display in my Airport Utility dialogue box?

    I had the same problem, ended up just resetting the cable modem and Airport by unplugging both and letting them boot up again. The green light is back and it is still running with the old firmware.

  • Im trying to upgrade to the 4.3.4 but keep getting a error message 3259 down load time out ?? can any one help

    I'm trying to upgrade to the 4.3.4 when im downloading it states that it has 32 hours download time ( has Apple cheged this )  but keep getting a timed out error message err=3259, is there anything i can do  (beside buy a mac)

    You cant try this
    Slide to Unlock Several users have been able to fix this issue by simply sliding the “Slide to Unlock” button on their iPhones before attempting the update.
    Disable antivirus software. If you are using Windows, try temporarily disabling antivirus software before applying the update.
    Disable firewall. Instructions for Windows XP, Windows Vista and Windows 7.
    Update router firmware. Check your router manufacturer’s website, and download and install any new updates for your wireless router. Alternatively, try plugging the ethernet cable directly into your computer.
    As last resort download separately 4.3.4 http://appldnld.apple.com/iPhone4/041-1923.20110715.BnATg/iPhone3,1_4.3.4_8K2_Re store.ipsw and use Shift + Restore button on itunes. Then restore your settings and etc. from backup.
    Remember to Beackup first, because Shift + Restore will make factory restore.

  • Trying to upgrade to Mountain Lion, error is  message; " product distribution file could not be verified. It may be damaged or was not signed"

    trying to upgrade to Mountain Lion, error   message; " product distribution file could not be verified. It may be damaged or was not signed" ??
    what to do? This is in App store. I followed the link e-mailed to me that an upgrade was available....... Puzzled.

    Several causes for this problem have been reported. Please take each of the following steps that you haven't already tried. Stop when it's resolved.
    Step 1
    Back up all data.
    From the menu bar, select
     ▹ System Preferences... ▹ Network
    If the preference pane is locked, click the lock icon in the lower left corner and enter your password to unlock it. Then click the Advanced button and select the Proxies tab. If any proxy options are selected, make a note of them and then deselect them. You don’t need to change the bypass or FTP settings. Click OK and then Apply. Test. The result may be that you can't connect to any web server. Restore the previous settings if that happens.
    Step 2
    Rebuild the Spotlight index. If you try to search now from the magnifying-glass icon in the top right corner of the display, there will be an indication that indexing is in progress.
    Step 3
    Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Bought brand new ipad 2, upgrading firmware and error 3194

    I just got a brand new ipad 2 32gb wifi only. I want to upgrade firmware and i get error 3194. I tried changing host file and other things like that. I am really sick of this problem please help me if you can.
    Im currently on 4.3.5 and want to go to 5.0

    Posting in all caps is considered to be shouting at someone here in the Apple Support Communities and a very poor lack of manners. It will also likely bring about folks ignoring you.
    Then you might try some of the approaches in this article;
    http://support.apple.com/kb/ts1275

Maybe you are looking for