Error type "1" in Mac

Dear friends: anyone can help me? I'm trying to install the CC app in my Mac desktop, and I can't, because an type "1" error.
Thank you very much in advance!!!

Perform the steps mentioned on below link
https://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html

Similar Messages

  • Power mac 8600/250 error type 41

    the message appears before i see the desktop but after it boots up. I don't understand because everything looks fine until i get this message and I'm lost
    I have tried restarting it holding down the shift key and i get the same results

    error -41 mFulErr: memory full (open) or file won't fit (load)
    This article explains the cause of Error Type 41 and tells how to eliminate it...
    http://docs.info.apple.com/article.html?artnum=24431

  • Error type 102

    I have an i book a friend gave me but when i put it on it says error type 102 temporary turn off extensions ,restart and hold down the shift key but is not doing nothing after i hold the key and shut it down .not even the cursor comes up . Is somebody else having the same problem ?

    Usually when a vintage computer running Mac OS 9 shows that message
    that could mean the version of OS 9.2 was arrived at incorrectly and may
    not be for the computer it was installed on. A base level OS 9, updated,
    only goes so far; a retail install disc for a later version is required; plus
    any original update files. Most older support site links no longer work, so
    if you see some information online pointing to Apple Support - Mac OS 9,
    they generally put you on the newer home page, nothing about OS9/8/7.
    If you have a compatible Mac OS system on DVD or CD for the computer,
    depending on what vintage it is, you could attempt to use the Disk Tools
    on there to check the hard disk drive, repair it, and perhaps erase & install
    a new system.
    You don't really say much about the computer, the situation involves details
    and most of them are lacking where they are necessary to attempt to help.
    The details vary according to the exact build model series iBook G3/G4
    you have. Some last model ones do not boot into OS9 at all, but can use
    OS9 as Classic in an OS X computer, no later than Tiger 10.4.11.
    If your computer originally ran OS 8.1 through 8.6, a Mac OS 9.0 or later
    retail install disc may work. If it supports OS 9.2, if you want to end up at
    OS 9.2.1 or OS 9.2.2, get a retail OS 9.2.1 Install CD.
    Is this a clamshell colors early G3 iBook, if so which one? If it is a white G3
    iBook, (first was 500MHz dual-usb) which one? Then, they went to G4 as a
    processor base. These also have different system/hardware requirements.
    And they shipped with compatible discs, with part numbers for their series.
    The error message implies the incorrect OS version was installed or partial
    installation had failed; there may also be other hardware issues involved.
    An old obsolete KB article from Apple support suggests the system is too
    old for the computer to use; but it may be an improper installation of one
    that is not correct for the ROM version of the computer. Perhaps you have
    an older computer that was supposed to have a firmware update, too?
    Does the iBook have a tray-load optical drive, or a slot-load? Here's a page
    of iBook models, all models from the first to last; to help identify your model.
    There also is a page where you can figure exactly what one you have.
    •Apple iBook Specs (All iBook Technical Spec) - everymac:
    http://www.everymac.com/systems/apple/ibook/index-ibook.html
    The issue likely is the lack of matching supported software, to include correct
    installer discs and other items; some models required firmware update to run
    a later system. Mostly after OS X was introduced a major update was issued.
    Good luck!

  • Error Type 102 in 9.2.2

    All of a sudden I'm getting a system bomb with an error type 102. The hard drive boots well into 10.3.3. I've run norton disk doctor and everything checks out. I get a disk icon with a questions mark and then the 9.2 logo comes up with a system bomb and the error type 102 message. The same thing happens when I try to boot without extensions. HELP!!

    Dennis, you didn't fully read the DiskWarrior page. Here's what it says:
    "DiskWarrior ships on a CD-ROM that will start up in Mac OS X on a Mac with a G3 or higher processor (including a G5) with built-in USB and 128 MB (256 MB recommended) of RAM.
    Once started from the DiskWarrior CD, DiskWarrior can be run from the CD to eliminate all damage to any HFS (Mac OS Standard) and HFS Plus (Mac OS Extended) disk directories, including your normal startup disk as well as journaled disks (but not case-sensitive disks). Version 2.1 of DiskWarrior, also included, runs and installs on a 68020 Mac or better when started from Mac OS 7.1 to 9.x. Either version of DiskWarrior repairs any supported disk no matter which version of the Mac OS is installed on the disk being repaired."
    So, it will work for you.
    Is your OS 9.2.2 on a separate partition? Or on the same volume/partition as OS X with OS 9 running as Classic?
    Cheers, Tom

  • Error Type 102, Unimplemented Trap, Will not initialize...

    Among a lot of eight iMacs that were donated to us, there are a pair of them each with their own issues. Both are old CRT iMacs from 2001 with 266MB of RAM.
    (#1)
    This iMac initially was advertising an "Unimplemented Trap." I could boot up with the shift key or the C key down, but not otherwise.
    By the recommendation of a number of websites, I tried altering the extension expression with the extension manager. Even if I unchecked every box in the extension manager, the reboot would not be successful, requiring either shift or C to be pushed to get past the "OS 9.2" boot screen.
    With the computer not responding to the alterations in the extension manager, I put in the OS 9.2.1 disc and ran a complete install. During installation, it warned me that the Remote Access 4.0 required Open Transport 2.0 (or something to this effect).
    After the install, I am now getting an "Error Type 102" at start up. I can still restart with the shift or C key, but I remain unable to have any positive effect on booting even after unchecking every conceivable box within the extension manager.
    Any suggestions?
    (#2)
    This iMac boots successfully in the sense that it gets beyond the start up screen to the Desktop. Once it gets there, mouse inputs are received with respect to movement, but neither key strokes nor mouse clicks have any effect.
    When a CD is not in the drive, it will load a window labeled "Launcher" with nothing inside at the moment the computer stops initializing.
    When a CD is in the drive, it will load a window displaying all of the CD's contents at the moment the computer stops initializing.
    When I boot with shift, the Extension Manager can not be opened, "because it is locked."
    When I try to boot with C, I get an icon of a disk with a flashing question mark at the initial gray screen.
    Problem with the CD drive? Any ideas?
    Thanks a million. Getting these computers working would be a huge help: we need them to be working when school starts in two weeks and we don't have the money to purchase new computers.

    To Apple Discussions!
    *Unimplemented Trap Error*
    Probable Causes: There are several.
    Can involve the Macintosh's ROM (read only memory), where core operating system routines are stored. The error can occur when a request made for a routine that's in ROM could not be completed because the routine was unavailable. Typically, this error is caused by older software that assumes an older version of ROM. The software in question could be an application or a system extension.
    Unimplemented Trap error can also occur when the Macintosh model or the system software is too old for your application(s). While most software is written to be backward compatible (i.e., designed to work with older hardware models and system versions), it is not possible to be compatible with every Macintosh and system software version.
    Possible Solutions:
    Make sure your software is current and is compatible with your Macintosh model and system software.
    Most software applications include system requirements in the documentation or on the outside of the box. If your configuration does not meet the minimum requirements, upgrade your configuration as necessary.
    Similarly, if you are using an application that is more than one major version older than the current version (major versions being 2.0, 3.0, 4.0 and minor versions being 2.01, 2.2, 2.2.3, etc.), but your Macintosh model and system software are current, upgrade your application to the current version.
    ============
    According to Article: http://support.apple.com/kb/HT2088 Mac OS System Error Codes: 1 to 32767
    Error Type 102 = System is too old for this ROM
    =============
    http://docs.info.apple.com/article.html?artnum=58042 Macintosh: Flashing Question Mark at Startup
    ============
    "Among a lot of eight iMacs that were donated to us,"
    Hopefully, you were also given the System CDs that originally came w/those iMacs. If not, you can get replacement System Install & Restore CDs from Apple's Customer Support - in the US, (800) 767-2775 - for a nominal S&H fee. You'll need to have the model and/or serial number of your Mac available.

  • When I try to e-mail photos from i photo 11 I get a "Error type 10665" message... what does that mean?, When I try to e-mail photos from i photo 11 I get a "Error type 10665" message... what does that mean?

    When I try to e-mail photos from i photo 11... I am getting this message:  "Error type 10665"  . 
    What does this mean?  I have gone over the tutorials for emailing photos... very simple... am doing exactly that... 
    and I have also done this before... so I am not sure what the problem is. 
    The photos have been downloaded from my i phone... would that matter?
    thank you..
    debi

    Hello WayneSchlapkohl,
    Welcome to the HP Support Forums!
    I understand that you are looking to Email a scanned photo, but do not want the file to be to large. Are you using HP software when you get the error "not connected to the internet" ? If so, What is the Operating System installed, Windows, including version, e.g. Windows 7 or Mac, including version, e.g. 10.8?
    Lowering the DPI or resolution will help keep the file size down, if you have an option for that in the software.
    Also, what is the Email client are you using, MSN, Gmail, etc?
    Cheers,
    JERENDS
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • System error type 41. Startup problem

    I have an iMac (500) G3 (Summer 2000) and it will not complete its startup. It starts, then before it is complete I get a bomb message, 'Sorry, a system error has occurred."Time Synchronizer" Error Type 41. Restart.'
    When you restart you get the same message. I have tried restarting from the CD, but the same thing happens. I can't use the computer to try things because it doesn't complete its startup. Any suggestions?

    I have been looking around and stumbled across KB 24431, Mac OS: Error Type 41.
    Also in KB 30691, Mac OS: When and Why to Perform a Clean Installation it says
    Exception: If the computer starts up to a Type 41 error with extensions off, the issue is probably with the Finder alone. Instead of performing a clean installation, drag the Finder file from the System Folder to the Trash, then perform a regular installation over the existing System Folder.

  • Powerbook 1400 bus error (with extensions) error type 10 (without ext.)

    i have a powerbook 1400. bus error (with extensions) error type 10 (without extensions)
    no cd. floppy is dead
    the computer i put os 9 on it was a friend's 3400 witch is dead. i will see if i can get his hd.
    there are no pc cards in the slots and it has os9 so removing all the ram possable including the factory ram (i only have 16 mb noram in the expansion slot eather) it will not boot. (sad mac)
    the 1400 is my favorite computer
    I only have a dead pb 165 (no video only sad mac sounds) and a dell (i dont like pcs so i really need to get the 1400 working) and the dell has a very bad keyboard. it likes to repeat keys alot
    powerbook 1400cs/117   Mac OS 9.0.x   i want a newer mac

    macintosh lover
    It isn't what you believe that you need in the Mac so much as what its ROM tells the 1400 that it should have. Its software is integrated with what the Mac 'thinks' of itself as being, whether you use video mirroring, HDD spindown, persistent RAM Disk or any other feature that applies to PBs rather than to DTs. Why handicap the machine by omitting parts of its persona? It will be less stable, be given to unpredictable episodes of petit mal, and be downright unreliable as a result, especially if it also lacks the physical parts of its person that you mention. That is why it needs a System for its kind of PowerBook.
    Grant has outlined the best method of getting a handle on the PB, which will be much aided by its having a working HDD, a functional trackpad and so on.
    Apple IIe; 68K: 11DT + 4PB; PPC: 5DT + 3PB; G3: 6DT     System 6.0.8 to OS 10.4.x

  • CD stuck & Error type 41

    My Performa 6360 is stuck on "error type 41." I have found out how to proceed, but the 1st step is to start it up from an OS disc. It was last used with an OS 8.6 disc which I no longer have because I wanted to upgrade to an OS 9. I have put the OS 9 in the CD slot, but when I start up, the screen says it is starting on OS 8.6 & just goes back to being stuck on the "error type 41" message. Furthermore, I cannot get the CD carrier to open again. I have restarted while holding in the CD button. I have put a straight paper clip into the little hole by the CD button. Neither has gotten it open. Help!!
    Performa 6360   Mac OS 9.0.x  

    To boot from a known good CD in a functioning drive:
    Start with power off. Press and hold the C key. momentarily touch the power key to start up, while continuing to hold the C key until the distinctive desktop (often flying CDs) appears. It you get the wrong OS, it is trying to boot from your Hard drive instead. Your CD drive may not be working correctly.
    File System Errors:
    -41 mFulErr Memory full (open) or file won't fit (load)

  • Popup window error message on a Mac .....There was a problem connecting to the server 172.17.0.22

    I keep getting a popup error message on my mac "There was a problem connecting to the server 172.17.0.22"
    How do I fix this problem

    That is The moment you go to open a new website it will reappear and then you need to close it before I can access the website I want. …

  • Error while executing "" command Error type ACCESS VIOLATION Error Address: 0006898E Module name:gfsdesk.DLL

    Hi All,
    I'm using diadem from .net Program. While on the run I'm getting the following error.
    Error While executing "" Command
    Error type ACCESS VIOLATION
    Error Address: 0006898E
    Module name:gfsdesk.DLL
    Anyone have any idea why this is happening?
    regards,
    Swaroop

    Hi Swaroop,
    It would be helpful to better understand what your code really does. The information that you called DIAdem from your enviroenment is not yet sufficient to understand what the problem might be.
    Andreas

  • Error:Type conflict when calling a function module RFC_ERROR_SYSTEM_Failure

    Hi Experts,
    When I run my Application in Portal, i am getting the following error.
    Type conflict when calling a function module., error key: RFC_ERROR_SYSTEM_FAILURE
    When I execute the BAPI, it is getting executed.
    My Bapi Strucute:
    Import Parameters
    IM_MAT_Search --> ZPTIP_MAT --> Import Parameters
    Tables
    IT_INFO_REC --> ZMM_GET_ITEM --> Output Parameters
    When I import the model, i am getting the structure like this
    BAPI_Name > ZMM_BAPI_Input> IM_MAT_Search(respective Parameters) , Output (respective Tables and their parameters)
                        > ZMM_Input1> Parameters
    This is the way, how i am executing in webdynpro java
    Zmm_Bapi_Ptip_Search_Input eleInput = new Zmm_Bapi_Ptip_Search_Input();
    wdContext.nodeZmm_Bapi_Ptip_Search_Input().bind(eleInput);
    Zptip_Asset eleInputAsset = new Zptip_Asset();
    eleInputAsset.setSearch("ACRS");
    wdContext.nodeZptip_Asset().bind(eleInputAsset);
    eleInput.setIm_Ast_Search(eleInputAsset);
    wdContext.nodeZmm_Bapi_Ptip_Search_Input().bind(eleInput);
    wdContext.nodeZmm_Bapi_Ptip_Search_Input().currentZmm_Bapi_Ptip_Search_InputElement().modelObject().execute();
    wdContext.nodeOutput().invalidate();
    Please let me know, how to do the same.
    Thanks in advance.
    Regards,
    Palani

    Hi David,
    I checked for the Parameter of setIm_Ast_Search, it is of Zptip_Asset.
    Hi Saleem,
    When I changed the same, i am getting the Type conflict error,
    Type conflict when calling a function module., error key: RFC_ERROR_SYSTEM_FAILURE
    Please let me know,what can be done in this regard to solve the problem.
    My BAPI Structure when imported as model
    SearchBAPI
    --> ZMM_BAPI_SEARCH_INPUT
    > IM_AST_SEARCH(zPTIP_ASSET)
    >Zptip_Asset
    >Search (Parameter)
    > OutPut(ZMM_BAPI_Search_Output)
    >IT_Asser_Rec(ZMM_Asset)
    >ZMM_Asset
    >TXT100 (output Parameter)
    --> ZMM_BAPI_SEARACH_OUTPUT
    --> ZPTIP_ASSET
    >Search (Parameter)
    Thanks & Regards,
    Palani
    Edited by: Palani Appan on Nov 11, 2009 5:31 PM

  • No memory error message on my mac mini what do i need to do?

    No memory error message on my mac mini when i try to update. What do need to do?

    Please post the entire and exact message.

  • Creative Cloud Installation Failed Download Error - Error Type -7 and Error Code - 401

    I subscribed to Creative Cloud in December 2012 and have been trying to install the applications, but the "Installation Failed" through the Adobe Application Manager. (see screenshot)
    Here is a line from my log file:
    01/08/13 11:08:48:346 | [WARN] |  | ASU | PDApp | DownloadError |  |  | 6120 | Download Error has come with GDE Error type - -7 and error code - 401
    I tried searching for the same error code in the "knowledge base" but couldn't locate any.
    I am on a Windows 7 (x64) machine. I also have CS5.5 installed.
    Anyone have this problem? Please help or point me in the right direction if you can. Thanks!

    Thanks Romsinha,
       I tried the above steps, with no luck.  I have admin rights on both laptop and desktop I'm trying to install to.  I have updated my AAM on both machines with no issue (when using the direct link above). But when I click the 'Try' link to download an application, it shows the scrolling status bar for a few seconds, then  "Installation Failed"  'Download error. Press Retry to try again or contact customer support. (-7)'   Retry only produces same results.
    Both machines are running Win 7 Pro - SP1 64bit
         (laptop - 16 GB RAM & Core i7-2760QM 2.40 GHz processor)
         (desktop - 8 GB RAM & Xeon W3520 2.67GHz processor)
    I am running in a corporate setting with I'm sure all sorts of Firewall protection etc...
    I'm planning on asking for a CC membership, but wanted to check out the new features first....
    Thanks!

  • HT3421 I get this error This update requires Mac OS X Tiger 10.4.11 or newer or Mac OS X Leopard version 10.5.6 or newer.

    I need to download this: (http://support.apple.com/kb/DL788) because my macbook wont turn on unless its charged. I did all the resets like VPRAM, SMC, and I forgot the other one.
    My pack thingy is 0002 and it says that if its 0003 then you dont need the update but I do need the update.
    I get this error:
    This update requires Mac OS X Tiger 10.4.11 or newer or Mac OS X Leopard version 10.5.6 or newer.
    I purchased the battery in December. It worked fine but now its happening again! Please help! Its annoying and the nearest Apple store is 2 hours away!

    Please help me!

Maybe you are looking for