Error type: COMPONENT_ERROR Could not start TCP connection listener

Hi All,
I am working with EDI to SAP R/3 scenario with Seeburger. In this i am using EDI message ORDERS V9A .
i have configured OFTP adapter for this.
when i enter into the Runtimeworkbench i have seen adapter monitoring. in this i got one error mentioned below.
Please give me solution for this error
Processing Details for Cluster Node Server 0 1_39044
Type
Time Stamp
Message ID
Explanation
03/04/08 14:22:12
Error type: COMPONENT_ERROR >> Error date: 03/04/08 14:22 >> Description: Error occurred while trying to start connection listeners. Could not start TCP connection listener [[TCP listener Channel: CC_SOURCE_EDI;Party: GXSMAILBOX;Service: GXSMAILBOX (ID: ): 198.133.252.208:11551]]. Reason: Could not start connection listener [03/04/08 14:22]
Thanks and regards
sai

Hi,
The date format which can seen in error in not suppoted in SAP ECC system.......it will take yyyymmdd as the date format......change the date format in XI.......in mapping we can use standard funtion fro date transformation.
Regards,
Phani

Similar Messages

Error...Could not start the Oracleoracle10gDBTNSListener

I am trying to start from services.msc the database listener .
I get the error as
Microsoft Management Console
Could not start the Oracleoracle10gDBTNSListener service on Local Computer.
Error 1053: The service did not respond to the start or control request in a timely fashion.
my listener entries are:
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oracle10gDB)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = IFLEXVPC)(PORT = 1521))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
)

# This file is actually generated by netca. But if customers choose to
# install "Software Only", this file wont exist and without the native
# authentication, they will not be able to connect to the database on NT.
SQLNET.AUTHENTICATION_SERVICES = (NTS)
# SQLNET.AUTHENTICATION_SERVICES = (NONE)

Oracle10g Installation Error isqlplus service could not start

I have successful installed Oracle10g on Windows 2000 Professional on a machine with no previous installation of Oracle.
I uninstall Oracle9i on another machine with Windows 2000 Professional using the Universal Installer, run regedit to remove Oracle under Software; stop all Oracle Services; delete the oracle physical folder.
I restart the PC and install Oracle 10g, but the following error appear:
Could not start the OracleOraDb10g_home1iSQL*Plus service on Local Computer.
Error 1053: The service did not respond to the start or control request in a timely fashion.
I neglect this error and continue the installation. All services work, e.g. sqlplus, and Enterprise Manager
http://localhost:5500/em works except
isqlplis on http://localhost:5560/isqlplus
I check the Control Panel's Administrative Tools, Services and found that OracleOraDb10g_home1iSQL*Plus is starting, but you cannot stop or start it. What happens?
Is there a way to seolve this problem?

I resolve this problem caused by JAVA_HOME path of the Windows 2000's System Variable by changing it to map to c:\oracle\product\10.1.0\Db_1\jdk and then OracleOraDb10g_home1iSQL*Plus service can start successfully on Local Computer

MaxDB (DBM76.EXE) error [-100 ERR_DBMSRV_NOSTART: Could not start DBM]

Hi, I installed the Trial preview 7.01....after that installed DBM76.EXE........but when I tried to ADD DATABASE INSTANCE with Database server <local> & <default> Port...............this error came in popup !!!!
-100 ERR_DBMSRV_NOSTART: Could not start DBM
Plz help.
Ajay.

While doing the smoke test for ERP6.04 ,I am also facing the same error :
ERR_DBMSRV_NOSTART :Could not start DBM
Please help to sort it out.
Regards
HARISH

"Windows could not start the offline files service on local computer. Error 3: The system cannot find the path specified"

Using Windows 8.1 Pro on Toshiba Satellite i7 Laptop with 8Gb Ram
After upgrade from Windows 8 Pro to 8.1 Pro, the Offline Files/CSC service refuses to start and gives the error message:
"Windows could not start the offline files service on local computer. Error 3: The system cannot find the path specified"
Before the upgrade, offline files worked fine... how do I re-enable offline files?

I had a similar issue - couldn't make any files available offline.
I found that the offline folder service would not start
This was because the CSC permission were totally screwed. I had to take ownership of each folder and file, one by one, then grant everyone full access.
then delete the full contents of the CSC folder
format the CSC database using the registry fix then reboot
in control panel, disable the offline files, reboot, then re-enable. and now its working :)
2hrs to resolve this, with grateful thanks to this thread and some others.
damn windows8

Could not start Biztalk Service Biztalk Group: Error 1053 , In Biztalk Server 2010 environment

Hi,
I am getting following error while starting Biztalk 2010 service
Error message :
Windows could not start the Biztalk Service Biztalk Group :
BizTalkServerApplication service on Local Computer.
Error 1053: The service did not respond to the start or control request in a timely fashion
Please suggest.
Thank you.
Warm Regards,
Anant Patil.

When did this issue start?
Did you install something? Some update? To OS, to SQL Server, to BizTalk?
Did you deploy some BizTalk artifacts?
If so, try to undo this software.
Were there some changes in network?
Leonid Ganeline [BizTalk MVP]
BizTalk: Sample: Context Routing and Throttling with orchestration

Ora-12154 Could not resolve the connect Identifier specified

I am facing problem for communicating to Microsoft SQL Server through Oracle GateWay.
*1*. In installed Oracle Gateway 11.2 @D:\product\11.2.0\tg
*2. D:\product\11.2.0\tg\dg4msql\admin\initdg4msql.ora* is as:
HS_FDS_CONNECT_INFO=dba.Insignia
HS_FDS_TRACE_LEVEL=OFF
HS_FDS_RECOVERY_ACCOUNT=RECOVER
HS_FDS_RECOVERY_PWD=RECOVER
*3. listener.ora is as (D:\product\11.2.0\tg\NETWORK\ADMIN\tnsnames.ora)*
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = dba)(PORT = 1521))
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
ADR_BASE_LISTENER = D:\product\11.2.0\tg
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = dg4dmssqldb)
(PROGRAM = D:\product\11.2.0\tg\bin\dg4msql)
SUBSCRIBE_FOR_NODE_DOWN_EVENT_LISTENER=OFF
*4. tnsnames.ora is as (D:\product\11.2.0\tg\NETWORK\ADMIN\listener.ora)*
PROD=
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.0.230)(PORT=1521))
(CONNECT_DATA=(SID=PROD))
msql1=
(DESCRIPTION=
(ADDRESS_LIST=
(ADDRESS=(PROTOCOL=TCP)(HOST=dba)(PORT=1521))
(CONNECT_DATA=
(SID=dg4dmssqldb) )
(HS=OK)
*5. Oracle Database Link (its working well)*
create database link apps connect to dba identified by dba using 'prod';
*6. Microsoft Sql server Database Link*
create database link msql1 connect to "sa" identified by "angal" using 'msql1' ;
When i try to select data through microsoft sql server database link its show following error;
Ora-12154 Could not resolve the connect Identifier specified
Wher i wrong......

Hello,
I have not used Oracle Gateway for a long time, but did you try to rename the file D:\product\11.2.0\tg\dg4msql\admin\initdg4msql.ora into D:\product\11.2.0\tg\dg4msql\admin\initdg4dmssqldb.ora ?
initdg4msql.ora is the default name, and should be changed if you do not use dg4msql as gateway SID:
http://download.oracle.com/docs/cd/E11882_01/gateways.112/e12013/configsql.htm#autoId2
Hope it will help.
Regards,
Sylvie

CLI156 Could not start the domain domain1. in Application Server 8

Hi everybody!
Sorry to post this message here at Application Server 7. But I'm using the Application Server 8 along with NetBeans 4.1 early access. Suddenly, the application server stop working on my computer and now, every time I try to start the default server, I get this error message:
CLI156 Could not start the domain domain1.
With the following log:
Starting Sun Java System Application Server Platform Edition 8.0.0_01 (build b08-fcs) ...
[#|2004-12-28T22:46:39.359+0000|INFO|sun-appserver-pe8.0.0_01|javax.enterprise.system.core|_ThreadID=10;|CORE5076: Using [Java HotSpot(TM) Client VM, Version 1.4.2_06] from [Sun Microsystems Inc.]|#]
[#|2004-12-28T22:46:42.296+0000|INFO|sun-appserver-pe8.0.0_01|javax.enterprise.system.tools.admin|_ThreadID=10;|ADM0020:Following is the information about the JMX MBeanServer used:|#]
[#|2004-12-28T22:46:42.625+0000|INFO|sun-appserver-pe8.0.0_01|javax.enterprise.system.tools.admin|_ThreadID=10;|ADM0001:MBeanServer initialized successfully|#]
[#|2004-12-28T22:46:46.921+0000|ADVERTENCIA|sun-appserver-pe8.0.0_01|javax.enterprise.system.stream.err|_ThreadID=10;|log4j:WARN No appenders could be found for logger (org.apache.catalina.startup.Embedded).|#]
[#|2004-12-28T22:46:46.921+0000|ADVERTENCIA|sun-appserver-pe8.0.0_01|javax.enterprise.system.stream.err|_ThreadID=10;|
log4j:WARN Please initialize the log4j system properly.|#]
[#|2004-12-28T22:46:47.687+0000|INFO|sun-appserver-pe8.0.0_01|javax.enterprise.system.container.web|_ThreadID=10;|Creating virtual server server|#]
[#|2004-12-28T22:46:47.718+0000|INFO|sun-appserver-pe8.0.0_01|javax.enterprise.system.core|_ThreadID=10;|S1AS AVK Instrumentation disabled|#]
[#|2004-12-28T22:46:47.750+0000|INFO|sun-appserver-pe8.0.0_01|javax.enterprise.system.core.security|_ThreadID=10;|SEC1143: Loading policy provider com.sun.enterprise.security.provider.PolicyWrapper.|#]
[#|2004-12-28T22:46:53.718+0000|INFO|sun-appserver-pe8.0.0_01|javax.enterprise.system.core.transaction|_ThreadID=10;|JTS5014: Recoverable JTS instance, serverId = [100]|#]
[#|2004-12-28T22:46:56.984+0000|INFO|sun-appserver-pe8.0.0_01|javax.enterprise.system.core|_ThreadID=10;|Satisfying Optional Packages dependencies...|#]
[#|2004-12-28T22:46:57.984+0000|INFO|sun-appserver-pe8.0.0_01|javax.enterprise.resource.resourceadapter|_ThreadID=10;|RAR7008 : Initialized monitoring registry and listeners|#]
[#|2004-12-28T22:46:59.328+0000|INFO|sun-appserver-pe8.0.0_01|javax.enterprise.system.core|_ThreadID=10;|CORE5100:Loading system apps|#]
[#|2004-12-28T22:47:00.468+0000|INFO|sun-appserver-pe8.0.0_01|javax.enterprise.system.core.classloading|_ThreadID=10;|LDR5010: All ejb(s) of [MEjbApp] loaded successfully!|#]
[#|2004-12-28T22:47:00.640+0000|INFO|sun-appserver-pe8.0.0_01|javax.enterprise.system.core|_ThreadID=10;|Selecting file [C:\Sun\AppServer\lib\install\applications\__ejb_container_timer_app.ear] for autodeployment|#]
[#|2004-12-28T22:47:00.640+0000|INFO|sun-appserver-pe8.0.0_01|javax.enterprise.system.tools.admin|_ThreadID=10;|[AutoDeploy] Selecting file [ C:\Sun\AppServer\lib\install\applications\__ejb_container_timer_app.ear ] for autodeployment.|#]
[#|2004-12-28T22:47:02.390+0000|INFO|sun-appserver-pe8.0.0_01|javax.enterprise.system.tools.deployment|_ThreadID=10;|DPL5109: EJBC - START of EJBC for [__ejb_container_timer_app]|#]
[#|2004-12-28T22:47:04.640+0000|ADVERTENCIA|sun-appserver-pe8.0.0_01|javax.enterprise.system.stream.err|_ThreadID=10;|
CharScanner; panic: ClassNotFoundException: com.sun.jdo.spi.persistence.support.ejb.ejbqlc.EJBQLLexer$EJBQLToken|#]
I'm running this application server on Windows XP, like I said, I was working with NetBeans and suddenly, the AS stop working.. I did not delete anything, I did not move anything either.
Please, does any of you have any ideas of how can I fix this issue?
Best regards!

You may try this soultion. I fixed this in my Window 2000 machine(Application Server 8) by:
1. Edit domain.xml($DEFAULT_DOAMIN/config)
2. Update the port="4702" for http-listener tag, and change to something else(e.g. 4802).
3. Save it
4. Make sure the Application Server is shut down.
5. Start the Application Server.
Hope it helps!
Ming-wei

Could not start Tomcat 6 on XP

Hi,
I have installed Apache Tomcat 6 in my Windows XP.
When I try to start it from Control Panel-->Administrative tools-->Services I'm getting the following error.
"Windows Could not start Apache Tomcat on Local Computer. For more information, review the System Event Log.
If this is a non-Microsoft service vendor, and refer to service specific error code 0. "
Could anyone help me in this.
Thanks in advance.

Hi,
Working with Tomcat often, I seem to come across the same issue again and again so I created a file to remind me ''all the moving parts'' in tomcat.
I am using Sun role manager as an example. Hope this helps.
--Change the imagepath in the registry
HKEY_LOCAL_MACHINE --> SYSTEM --> CurrentControlSet --> Services --> Tomcat5 --> ImagePath
Change the Value data
-- Typically it will be C:\Program Files\Sun Role Manager\SRM-4.1\tomcat55\bin\tomcat5.exe //RS//Tomcat5
Click ok
--Change the log file
C:\Program Files\Sun Role Manager\SRM-4.1\tomcat55\bin\tomcat5w.exe
logging tab
Log path: C:\Program Files\Sun Role Manager\SRM-4.1\tomcat55\logs
--Change the path to the new jvm.dll file
C:\Program Files\Sun Role Manager\SRM-4.1\tomcat55\bin\tomcat5w.exe
Java Tab -->
Java Virtual Machine: C:\Program Files\Sun Role Manager\SRM-4.1\jre1.5\bin\client\jvm.dll
Make sure the Java Classpath is correct
Start Apache
Daniel

Encore 1.5 Transcoding could not start not enough disk space

Dear all,
I have a relative new raid 0 with four Hitachi (HDS721075KLA330) disks. At the moment I've got 2794.54 GB capacity (quite enough) and 1825.83 GB of free space. When finishing a Encore 1.5 project for making a DVD folder there is the error message: "Transcoding could not start there is not enough disk space available. 0 is available on E:\, 237.55 is required. Please free up disk space." Also messages during saving: "No disk space".
The weird thing is I've hadn't had this error before using the same raid disks, but since a few days I am stuck.
My OS is Windows CP Professional (SP2), 2 GB RAM, Radeon X1650 video card, Matrox RT.X100 video editing card. Thanks for your help.
Hans Hermans

If I remember correctly, this is a bug caused by the sheer size of your target array. In the olden days when 1.5 was the released version, Terabyte drives were uncommon, and the package could not actually see it as this large, and will throw this error.
The workaround was to partition the target array into smaller sizes (less than 1 Terabyte) and you should be able to return back to normal.

8350i Could not start the camera

When trying to use the camera on the new 8350i, I get an error message indicating "Could not start the camera. Close other applications and try opening the camera again", even if all of the other apps are closed.
Ideas ???
Solved!
Go to Solution.

Reset the device taking out the battery for 30 seconds, and install it again.
If I help you with any inquire, thank you for click kudos in my post.
If your issue has been solved, please mark the post was solved.

Deployment SDM could not start the J2EE Cluster on the host nw4host

Hello,
I installed the WAS testdrive on Linux SUSE 9.3 and the SNDS on WinXP.
I am trying to deploy the welcome application from the SNDS and get the following error message:
SDM could not start the J2ee Cluster on the host nw4host! The online deployment is terminated. JStartup Framework ist not able to deliver an information about the cluster control instances! Please check the status of the J2EE Engine.
I can start the J2EE Start page on port 50000, the system info shows that dispatcher, server0 and SDM are running. I can start the visual admin with go, the SDM with RemoteGui and the DeployTool.
The comand startsap check nw4host shows, everythings running:
nw4host:nw4adm 54> startsap check nw4host
Checking ADA db Database
ABAP Database is running
Checking ADA db Database
J2EE Database is running
See logfile JdbcCon.log
Checking SAP NW4 Instance SCS01
Instance SCS01 is running
Checking SAP NW4 Instance DVEBMGS00
Instance DVEBMGS00 is running
Logging in to SAP with the Java Gui, the ICM says:
ABAP Server operational        = TRUE
J2EE Server configured         = FALSE
J2EE HTTP port                 = 50000
J2EE HTTPS port                = 50001
J2EE Server operational        = TRUE
Default root access handler    = ABAP
URL Prefix Table loaded        = TRUE
Any idea where the problem could be ?
Thanks, Manfred.

changed the ip address for nw4host in etc/hosts to the real ip address of the server where application runs

Windows could not start block level backup engine service

Hello,
              Im
trying to perform system state backup for one of the server its unable to run. Last week we have performed the system state backup without any issue.
Operating System:2008
OS Version: R2 Small Business Server 2011 x64 Edition Build 7600
RAM-32 GB
Following event ID is reported in the logs;
Log Name:      Application
Source:        Microsoft-Windows-Backup
Date:          7/2/2013 2:25:35 PM
Event ID:      754
Task Category: None
Level:         Information
Keywords:
User:          SYSTEM
Computer:     ABC
The Block Level Backup Engine service has stopped.
When we try to restart the Block Level Backup Engine service we get error as “Windows could not start the Block Level Backup Engine Service on Local Computer.
Error 0x800700b7: Cannot create a file when that file already exists.”
I have already restarted Virtual disk and Volume shadow copy service, but no luck.
Any help in resolving this issue will be much appreciated.
Thank you.
Keshava

All,
Here is the solution which worked for me ;
Services.msc >properties page of Block Level Backup Service Engine
Changed to Log On tab
Instead of Log On as Local System Account changed to Log On as
[email protected] (select the account with admin creds), entered the password of admin and closed the properties page.
Now restart the Block Level Backup Service Engine and re-run the job, backup completes without any issue.
Thank you
Keshava

System Update could not start properly

Have recently been getting this error: System Update could not start properly
It worked fine (even getting itself updated) for over a year that I've had the machine (a T-61, 14.1", 4G ram, 200G hd, nvidea, running XP Professional, SP3)
Any thoughts?
Message Edited by robpm on 03-11-2009 06:20 AM

Hi, deinstall the old TVSU This is a newer version, then the installed one..it works for me..
thats good for drivers and lenovo updates:
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=TVSU-UPDATE
For Windows updates i use this for offline Updates:
its in german language but the updater itself is in english for english windows versions:
(optional updates not included)
http://translate.google.de/translate?prev=_t&hl=de&ie=UTF-8&u=http%3A%2F%2Fwww.winhelpline.info%2Ffo...=
orig not translated
http://www.winhelpline.info/forum/winhelpline-postservice-pack-updater/125108-windows-xp-update-pack...
after install these two packages and run through... your S10e should be updated and updaters works as it should...
regards KalvinKlein
Message Edited by KalvinKlein on 03-28-2009 05:40 PM
Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1

Re: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server

Hi,
I'm encountering an issue with "Named Pipes Provider, error: 40 windows" and am having problems determining how to fix it due to the environment I'm using. I have two SQL Servers installed on two separate Win2K3 Server boxes, one is SQL Server 2000 and the other is SQL Server 2005. The SQL Server 2000 contains the actual application data. The 2005 database is used only for Reporting Services. I've set up the reports on SSRS such that their datasources hit the 2000 server. This is using SQL Server authentication.
When testing the reports via SSRS (in Visual Studio 2005), the connection to the data works and the reports are generated fine. When I deploy them to the reporting server and launch IE to test locally (still on the 2005 box), I get this "Named Pipes Provider, error 40" issue. I made sure that Named Pipes and TCP were enabled and the port set at 1433 (to match that on the 2000 box).
Now I changed the datasource's authentication from SQL Server to Windows authentication. I tested this in SSRS and this works too. When I redeployed the reports with this authentication change, testing the reports via IE locally (on the 2005 box) worked. Great. Now when I open IE on an external box, i.e. on the 2000 box, and try to test the reports, I get this same error 40 issue. I've been through a few threads describing the error 40, fiddling around with the SQL Server configuration as well as SSRS, to no avail. I have a feeling this error 40 issue has to due with permissions/authentication between the SQL Server boxes but I can't really be sure. Anyone have any ideas on how to troubleshoot my situation. Thanks.
larry

Named Pipes Provider, error: 40 - Could not open a connection to SQL Server :
I. Incorrect connection string, such as using SqlExpress.
Check out: http://forums.microsoft.com/TechNet/ShowPost.aspx?PostID=558456&SiteID=17
https://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=1245564&SiteID=1
The typical error when dealing with Express includes:
a. User is not aware of SqlExpress was installed as a named instance, consequently, in his/her connection string, he/she only specify ".","localhost" etc instead of ".\SqlExpress" or "<machinename>\Sqlexpress".
b. Np was disabld by default after installing SqlExpress.
c. If Sqlexpress was installed on the remote box, you need to enable remote connection for Express.
Please read the following blog for best practice of connecting to SqlExpress.
http://blogs.msdn.com/sql_protocols/archive/2006/03/23/558651.aspx
II. Named Pipes(NP) was not enabled on the SQL instance.
Check out: http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=136253&SiteID=1
Oppose to SQL 2000 which turn on all protocols, SQL 2005 SKUs turn off NP by default. So, when you see this error, please check:
1) Go to SQL Server Configuration Manager, See Server has NP enabled.
2) %windir%\program files\microsoft sql server\mssql.1\mssql\log, notepad ERRORLOG, see whether Server is listening on NP. You should see "Server named pipe provider is ready to accept connection on [ \\.\pipe\sql\query ] or [\\.\pipe\mssql$<InstanceName>\sql\query]"
3) Notice that "sql\query" is the default pipe name, so you need to know server is listening on which pipe name. eg: if you specify server pipe name is "sql\query1", then you would see in the errorlog that server listening on [ \\.\pipe\sql\query1 ], and go to SQL Server Configuration Manager, click client Named Pipe properties, see whether the pipe name is same with the one server listening on.
4) If you are using SQL Native Client ODBC/OLEDB provider({SQL Native Client} or SQLNCLI), go to SQL Configuration Manager, click client protocols, make sure NP and TCP are both enabled. Right click properties of NP, make sure client is using the same pipe name as server for connection.
5) If you are using MDAC ODBC/OLEDB({SQL Server} or SQLOLEDB) provider, in command line, launch "cliconfg.exe" and make sure NP enabled and right pipe name specified.
III. Remote connection was not enabled.
Check out: when you right click on the Server in SQL Server Management Studio, in Connections, the Remote server connections part, you have enabled the "Allow remote connections to this server" check box
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=322792&SiteID=1
https://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=763875&SiteID=1
If you are making a remote connection, namely, your target SQL Server is on the different box as client application, you might need to check whether:
a. "File and Printer Sharing" was opened in Firewall exception list.
b. Please see the blog for enabling remote connection for express and troubleshooting tips of remote connection.
http://blogs.msdn.com/sql_protocols/archive/2005/11/14/492616.aspx
http://blogs.msdn.com/sql_protocols/archive/2006/09/30/SQL-Server-2005-Remote-Connectivity-Issue-TroubleShooting.aspx
IV. Server not started, or point to not a real server in your connection string.
Check out: Open SQL Server Surface Area Configuration and ensure all the required services are started, Remote Connections are configured.
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=348662&SiteID=1
a. use "sc query mssqlserver" for default instance or "sc query mssql$<instancename>" to make sure SQL Server was started. Sometimes, reseason behind the broken of your client application w/ this error:40 might be SQL server restarted and failed, so, it'd better for you to double check.
b. User specified wrong server in their connection string, as described in the forum discussion, "MSSQLSERVER" is an invalid instance name. Remember, when you connect to default instance, <machinename> could be best representitive for the instance, when you connect to a named instance such as sqlexpress, you should specify <machinename>\<instancename> as data source in your connection string.
V. Other reasons such as incorrect security context.
Check out: http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=192622&SiteID=1
Such error also occured during user operation such as moving database or db mirroring or cluster, any DB OP that might invovle different sql instances, namely, the destination database is located in another sql instance and user is not aware of the state of the destination. I recommend you first isolate whether this fail is during connection stage or data operation stage.
a. During data operation, you are normally asked to type in the destination server name whether it is default to "(local)" or another server "<remotemachinename>". So, remember the exact string that represent the target instance, then when the error repros, open command line, use "sqlcmd -S<representitive> -E" ,see what happens, if the connection fail, please follow up above I - IV troubleshooting lists. otherwise continue.
b. If you can make basic conection, but still face the error, then there must be something that server reject the connection or client close the connection for some reason.
VI. Please try basic connectivity tests between the two mahcines you are working on. One simple way to verifty connectivity is to use command line tools, such as osql.exe. For example, osql -E -Stcpervername\instancename. If it connects cross-machine successfully, please also verify that your connection string in your scenario is correct.
Here are some blogs which could be helpful: just follow the basic connectivity troubleshooting guidelines on the SQL Protocols blog, see:
SQL Server 2005 Connectivity Issue Troubleshoot - Part I
http://blogs.msdn.com/sql_protocols/archive/2005/10/22/483684.aspx
and
SQL Server 2005 Connectivity Issue Troubleshoot - Part II
http://blogs.msdn.com/sql_protocols/archive/2005/10/29/486861.aspx
Hope this helps.

Error type: COMPONENT_ERROR Could not start TCP connection listener

Similar Messages

Maybe you are looking for